SIPLUS S7-1200 CPU 1214C RAIL . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS S7-1200 CPU 1214C RAIL

| | | | | |

Article number		6AG2214-1AG40-1XB0
		SIPLUS S7-1200 CPU 1214C DC/DC/DC RAIL
General information
Product type designation		CPU 1214C DC/DC/DC
Supply voltage
Rated value (DC)
в—Џ 24 V DC		Yes
permissible range, lower limit (DC)		20.4 V
permissible range, upper limit (DC)		28.8 V
Reverse polarity protection		Yes
Load voltage L+
в—Џ Rated value (DC)		24 V
в—Џ permissible range, lower limit (DC)		20.4 V
в—Џ permissible range, upper limit (DC)		28.8 V
Input current
Current consumption (rated value)		500 mA; CPU only
Current consumption, max.		1 500 mA; CPU with all expansion modules
Inrush current, max.		12 A; at 28.8 V DC
Output current
for backplane bus (5 V DC), max.		1 600 mA; Max. 5 V DC for SM and CM
Encoder supply
24 V encoder supply
в—Џ 24 V		L+ minus 4 V DC min.
Power loss
Power loss, typ.		12 W
Memory
Work memory
в—Џ integrated		100 kbyte
в—Џ expandable		No
Load memory
в—Џ integrated		4 Mbyte
в—Џ Plug-in (SIMATIC Memory Card), max.		with SIMATIC memory card
Backup
в—Џ present		Yes; maintenance-free
в—Џ without battery		Yes
CPU processing times
for bit operations, typ.		0.085 µs; / instruction
for word operations, typ.		1.7 µs; / instruction
for floating point arithmetic, typ.		2.3 µs; / instruction
CPU-blocks
Number of blocks (total)		DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used
OB
в—Џ Number, max.		Limited only by RAM for code
Data areas and their retentivity
Retentive data area (incl. timers, counters, flags), max.		10 kbyte
Flag
в—Џ Number, max.		8 kbyte; Size of bit memory address area
Local data
в—Џ per priority class, max.		16 kbyte; Priority class 1 (program cycle): 16 KB, priority class 2 to 26: 6 KB
Process image
в—Џ Inputs, adjustable		1 kbyte
в—Џ Outputs, adjustable		1 kbyte
Hardware configuration
Number of modules per system, max.		3 comm. modules, 1 signal board, 8 signal modules
Time of day
Clock
в—Џ Hardware clock (real-time)		Yes
в—Џ Backup time		480 h; Typical
в—Џ Deviation per day, max.		60 s/month at 25 °C
Digital inputs
Number of digital inputs		14; Integrated
в—Џ of which inputs usable for technological functions		6; HSC (High Speed Counting)
Source/sink input		Yes
Number of simultaneously controllable inputs
all mounting positions
вЂ” up to 40 °C, max.		14
Input voltage
в—Џ Rated value (DC)		24 V
в—Џ for signal "0"		5 V DC at 1 mA
в—Џ for signal "1"		15 V DC at 2.5 mA
Input delay (for rated value of input voltage)
for standard inputs
вЂ” parameterizable		0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four
вЂ” at "0" to "1", min.		0.2 ms
вЂ” at "0" to "1", max.		12.8 ms
for interrupt inputs
вЂ” parameterizable		Yes
for counter/technological functions
вЂ” parameterizable		Single phase: 3 @ 100 kHz & 3 @ 30 kHz, differential: 3 @ 80 kHz & 3 @ 30 kHz
Cable length
в—Џ shielded, max.		500 m; 50 m for technological functions
в—Џ unshielded, max.		300 m; For technological functions: No
Digital outputs
Number of digital outputs		10
в—Џ of which high-speed outputs		4; 100 kHz Pulse Train Output
Limitation of inductive shutdown voltage to		L+ (-48 V)
Switching capacity of the outputs
в—Џ with resistive load, max.		0.5 A
в—Џ on lamp load, max.		5 W
Output voltage
в—Џ for signal "0", max.		0.1 V; with 10 kOhm load
в—Џ for signal "1", min.		20 V
Output current
в—Џ for signal "1" rated value		0.5 A
в—Џ for signal "0" residual current, max.		0.1 mA
Output delay with resistive load
в—Џ "0" to "1", max.		1 µs
в—Џ "1" to "0", max.		5 µs
Switching frequency
в—Џ of the pulse outputs, with resistive load, max.		100 kHz
Cable length
в—Џ shielded, max.		500 m
в—Џ unshielded, max.		150 m
Analog inputs
Number of analog inputs		2
Input ranges
в—Џ Voltage		Yes
Input ranges (rated values), voltages
в—Џ 0 to +10 V		Yes
в—Џ Input resistance (0 to 10 V)		в‰Ґ100k ohms
Cable length
в—Џ shielded, max.		100 m; twisted and shielded
Analog outputs
Number of analog outputs		0
Analog value generation for the inputs
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.		10 bit
в—Џ Integration time, parameterizable		Yes
в—Џ Conversion time (per channel)		625 µs
Encoder
Connectable encoders
в—Џ 2-wire sensor		Yes
1. Interface
Interface type		PROFINET
Physics		Ethernet
Isolated		Yes
automatic detection of transmission rate		Yes
Autonegotiation		Yes
Autocrossing		Yes
Functionality
в—Џ PROFINET IO Controller		Yes
в—Џ PROFINET IO Device		Yes
в—Џ Open IE communication		Yes
в—Џ Web server		Yes
PROFINET IO Controller
в—Џ Transmission rate, max.		100 Mbit/s
Services
вЂ” Number of connectable IO Devices, max.		16
PROFINET IO Device
Services
вЂ” Shared device		Yes
вЂ” Number of IO Controllers with shared device, max.		2
Protocols
Supports protocol for PROFINET IO		Yes
PROFIBUS		Yes; CM 1243-5 required
AS-Interface		Yes
Protocols (Ethernet)
в—Џ TCP/IP		Yes
Open IE communication
в—Џ TCP/IP		Yes
в—Џ ISO-on-TCP (RFC1006)		Yes
в—Џ UDP		Yes
Web server
в—Џ User-defined websites		Yes
Further protocols
в—Џ MODBUS		Yes
Communication functions
S7 communication
в—Џ supported		Yes
в—Џ as server		Yes
в—Џ as client		Yes
Web server
в—Џ supported		Yes
Number of connections
в—Џ overall		16; dynamically
Test commissioning functions
Status/control
в—Џ Status/control variable		Yes
в—Џ Variables		Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters
Forcing
в—Џ Forcing		Yes
Diagnostic buffer
в—Џ present		Yes
Traces
в—Џ Number of configurable Traces		2; Up to 512 KB of data per trace are possible
Integrated Functions
Number of counters		6
Counting frequency (counter) max.		100 kHz
Frequency measurement		Yes
controlled positioning		Yes
Number of position-controlled positioning axes, max.		8
Number of positioning axes via pulse-direction interface		4; With integrated DO
PID controller		Yes
Number of alarm inputs		4
Number of pulse outputs		4
Limit frequency (pulse)		100 kHz
Potential separation
Potential separation digital inputs
в—Џ Potential separation digital inputs		500V AC for 1 minute
в—Џ between the channels, in groups of		1
Potential separation digital outputs
в—Џ Potential separation digital outputs		Yes
в—Џ between the channels		No
в—Џ between the channels, in groups of		1
Isolation
Isolation tested with		According to EN 50155 (routine test)
EMC
Interference immunity against discharge of static electricity
в—Џ Interference immunity against discharge of static electricity acc. to IEC 61000-4-2		Yes
вЂ” Test voltage at air discharge		8 kV
вЂ” Test voltage at contact discharge		6 kV
Interference immunity to cable-borne interference
в—Џ Interference immunity on supply lines acc. to IEC 61000-4-4		Yes
в—Џ Interference immunity on signal cables acc. to IEC 61000-4-4		Yes
Interference immunity against voltage surge
в—Џ on the supply lines acc. to IEC 61000-4-5		Yes
Interference immunity against conducted variable disturbance induced by high-frequency fields
в—Џ Interference immunity against high-frequency radiation acc. to IEC 61000-4-6		Yes
Emission of radio interference acc. to EN 55 011
в—Џ Limit class A, for use in industrial areas		Yes; Group 1
в—Џ Limit class B, for use in residential areas		Yes; When appropriate measures are used to ensure compliance with the limits for Class B according to EN 55011
Degree and class of protection
Degree of protection acc. to EN 60529
в—Џ IP20		Yes
Standards, approvals, certificates
Railway application
в—Џ EN 50121-3-2		Yes; EMC for rail vehicles
в—Џ EN 50121-4		Yes; EMC for signal and telecommunications systems
в—Џ EN 50124-1		Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.5 kV; UNm = 24 V DC
в—Џ EN 50125-1		Yes; Rail vehicles - see ambient conditions
в—Џ EN 50125-2		Yes; Stationary electrical equipment - see ambient conditions
в—Џ EN 50125-3		Yes; Signal and telecommunications systems - see ambient conditions; vibrations and shocks: Application point outside of tracks (1 m to 3 m away from track)
в—Џ EN 50155		Yes; Rail vehicles - temperature class T1, horizontal mounting position, salt spray Class ST2
в—Џ EN 61373		Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B
в—Џ Fire protection acc. to EN 45545-2		Yes; Rail vehicles - verification on request
Ambient conditions
Free fall
в—Џ Fall height, max.		0.3 m; five times, in product package
Ambient temperature during operation
в—Џ horizontal installation, min.		-25 °C; = Tmin; Startup @ -25 °C
в—Џ horizontal installation, max.		60 °C; Number of simultaneously activated inputs or outputs: 7 or 5 (no adjacent points) at 60 °C horizontal, 14 or 10 at 55 °C horizontal; 70 °C for 10 minutes (T1 acc. to EN 50155)
Ambient temperature during storage/transportation
в—Џ min.		-40 °C
в—Џ max.		70 °C
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Vibrations
в—Џ Vibration resistance during operation acc. to IEC 60068-2-6		2 g (m/sІ) wall mounting, 1 g (m/sІ) DIN rail
в—Џ Operation, tested according to IEC 60068-2-6		Yes
Shock testing
в—Џ tested according to IEC 60068-2-27		Yes; IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3		Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Use on land craft, rail vehicles and special-purpose vehicles
вЂ” to biologically active substances according to EN 60721-3-5		Yes; Class 5B2 mold, fungus and dry rot spores (with the exception of fauna); Class 5B3 on request
вЂ” to chemically active substances according to EN 60721-3-5		Yes; Class 5C3 (RH < 75%) including salt spray according to EN 50155 (ST2). The supplied plug covers must remain in place over the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-5		Yes; Class 5S3 including sand and dust. The supplied plug covers must remain in place over the unused interfaces during operation!
Programming
Programming language
вЂ” LAD		Yes
вЂ” FBD		Yes
вЂ” SCL		Yes
Cycle time monitoring
в—Џ adjustable		Yes
Dimensions
Width		110 mm
Height		100 mm
Depth		75 mm
Weights
Weight, approx.		415 g
Other
Note:		For use in railway applications, also observe the product information "SIPLUS extreme RAIL" A5E37661960A Online Support article 109736776

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания