SIPLUS extreme RAIL analog input modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS extreme RAIL analog input modules

| | | | | |

Article number	6AG2531-7NF10-1AB0	6AG2531-7KF00-1AB0
	SIPLUS S7-1500 AI 8xU/I HS T1 RAIL	SIPLUS S7-1500 AI 8xU/I/RTD/TC T1 RAIL
General information
Product type designation	AI 8xU/I HS	AI 8xU/I/RTD/TC ST
Firmware version
в—Џ FW update possible	Yes
Product function
в—Џ I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
в—Џ Measuring range scalable	No
Operating mode
в—Џ Oversampling	No
в—Џ MSI	Yes
CiR – Configuration in RUN
Reparameterization possible in RUN	Yes	Yes
Calibration possible in RUN	Yes	Yes
Supply voltage
Rated value (DC)	24 V	24 V
permissible range, lower limit (DC)	20.4 V	20.4 V
permissible range, upper limit (DC)	28.8 V	28.8 V
Reverse polarity protection	Yes
Input current
Current consumption, max.	240 mA; with 24 V DC supply
Encoder supply
24 V encoder supply
в—Џ Short-circuit protection	Yes	Yes
в—Џ Output current, max.	53 mA	53 mA
Power
Power available from the backplane bus	1.2 W	0.7 W
Power loss
Power loss, typ.	3.4 W	2.7 W
Analog inputs
Number of analog inputs	8	8
в—Џ For current measurement	8	8
в—Џ For voltage measurement	8	8
в—Џ For resistance/resistance thermometer measurement		4
в—Џ For thermocouple measurement		8
permissible input voltage for voltage input (destruction limit), max.	28.8 V	28.8 V
permissible input current for current input (destruction limit), max.	40 mA	40 mA
Technical unit for temperature measurement adjustable		Yes
Input ranges (rated values), voltages
в—Џ 1 V to 5 V	Yes	Yes
в—Џ Input resistance (1 V to 5 V)	50 kв„¦	100 kв„¦
в—Џ -1 V to +1 V		Yes
в—Џ Input resistance (-1 V to +1 V)		10 Mв„¦
в—Џ -10 V to +10 V	Yes	Yes
в—Џ Input resistance (-10 V to +10 V)	100 kв„¦	100 kв„¦
в—Џ -2.5 V to +2.5 V		Yes
в—Џ Input resistance (-2.5 V to +2.5 V)		10 Mв„¦
в—Џ -250 mV to +250 mV		Yes
в—Џ Input resistance (-250 mV to +250 mV)		10 Mв„¦
в—Џ -5 V to +5 V	Yes	Yes
в—Џ Input resistance (-5 V to +5 V)	50 kв„¦	100 kв„¦
в—Џ -50 mV to +50 mV		Yes
в—Џ Input resistance (-50 mV to +50 mV)		10 Mв„¦
в—Џ -500 mV to +500 mV		Yes
в—Џ Input resistance (-500 mV to +500 mV)		10 Mв„¦
в—Џ -80 mV to +80 mV		Yes
в—Џ Input resistance (-80 mV to +80 mV)		10 Mв„¦
Input ranges (rated values), currents
в—Џ 0 to 20 mA	Yes	Yes
в—Џ Input resistance (0 to 20 mA)	41 в„¦; Plus approx. 42 ohms for overvoltage protection by PTC	25 в„¦; Plus approx. 42 ohms for overvoltage protection by PTC
в—Џ -20 mA to +20 mA	Yes	Yes
в—Џ Input resistance (-20 mA to +20 mA)	41 в„¦; Plus approx. 42 ohms for overvoltage protection by PTC	25 в„¦; Plus approx. 42 ohms for overvoltage protection by PTC
в—Џ 4 mA to 20 mA	Yes	Yes
в—Џ Input resistance (4 mA to 20 mA)	41 в„¦; Plus approx. 42 ohms for overvoltage protection by PTC	25 в„¦; Plus approx. 42 ohms for overvoltage protection by PTC
Input ranges (rated values), thermocouples
в—Џ Type B		Yes
в—Џ Input resistance (Type B)		10 Mв„¦
в—Џ Type E		Yes
в—Џ Input resistance (Type E)		10 Mв„¦
в—Џ Type J		Yes
в—Џ Input resistance (type J)		10 Mв„¦
в—Џ Type K		Yes
в—Џ Input resistance (Type K)		10 Mв„¦
в—Џ Type N		Yes
в—Џ Input resistance (Type N)		10 Mв„¦
в—Џ Type R		Yes
в—Џ Input resistance (Type R)		10 Mв„¦
в—Џ Type S		Yes
в—Џ Input resistance (Type S)		10 Mв„¦
в—Џ Type T		Yes
в—Џ Input resistance (Type T)		10 Mв„¦
Input ranges (rated values), resistance thermometer
в—Џ Ni 100		Yes; Standard/climate
в—Џ Input resistance (Ni 100)		10 Mв„¦
в—Џ Ni 1000		Yes; Standard/climate
в—Џ Input resistance (Ni 1000)		10 Mв„¦
в—Џ LG-Ni 1000		Yes; Standard/climate
в—Џ Input resistance (LG-Ni 1000)		10 Mв„¦
в—Џ Pt 100		Yes; Standard/climate
в—Џ Input resistance (Pt 100)		10 Mв„¦
в—Џ Pt 1000		Yes; Standard/climate
в—Џ Input resistance (Pt 1000)		10 Mв„¦
в—Џ Pt 200		Yes; Standard/climate
в—Џ Input resistance (Pt 200)		10 Mв„¦
в—Џ Pt 500		Yes; Standard/climate
в—Џ Input resistance (Pt 500)		10 Mв„¦
Input ranges (rated values), resistors
в—Џ 0 to 150 ohms		Yes
в—Џ Input resistance (0 to 150 ohms)		10 Mв„¦
в—Џ 0 to 300 ohms		Yes
в—Џ Input resistance (0 to 300 ohms)		10 Mв„¦
в—Џ 0 to 600 ohms		Yes
в—Џ Input resistance (0 to 600 ohms)		10 Mв„¦
в—Џ 0 to 6000 ohms		Yes
в—Џ Input resistance (0 to 6000 ohms)		10 Mв„¦
в—Џ PTC		Yes
в—Џ Input resistance (PTC)		10 Mв„¦
Thermocouple (TC)
Temperature compensation
вЂ” parameterizable		Yes
вЂ” internal temperature compensation		Yes
вЂ” external temperature compensation via RTD		Yes
вЂ” Compensation for 0 °C reference point temperature		Yes; fixed value can be set
вЂ” Reference channel of the module	Yes; 9th channel that can be used as a genuine 9th RTD channel regardless of the parameterization of the other channels, or that can be used for compensation in the case of TC measurement
Cable length
в—Џ shielded, max.	800 m	800 m; for U/I, 200 m for R/RTD, 50 m for TC
Analog value generation for the inputs
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.	16 bit	16 bit
в—Џ Basic execution time of the module (all channels released)	62.5 µs; independent of number of activated channels
Smoothing of measured values
в—Џ parameterizable	Yes
в—Џ Step: None	Yes
в—Џ Step: low	Yes
в—Џ Step: Medium	Yes
в—Џ Step: High	Yes
Encoder
Connection of signal encoders
в—Џ for voltage measurement	Yes	Yes
в—Џ for current measurement as 2-wire transducer	Yes	Yes
вЂ” Burden of 2-wire transmitter, max.	820 в„¦	820 в„¦
в—Џ for current measurement as 4-wire transducer	Yes	Yes
в—Џ for resistance measurement with two-wire connection		Yes; Only for PTC
в—Џ for resistance measurement with three-wire connection		Yes; All measuring ranges except PTC; internal compensation of the cable resistances
в—Џ for resistance measurement with four-wire connection		Yes; All measuring ranges except PTC
Errors/accuracies
Linearity error (relative to input range), (+/-)	0.02 %	0.02 %
Temperature error (relative to input range), (+/-)	0.005 %/K	0.005 %/K; With TC type T 0.02 ± % / K
Crosstalk between the inputs, max.	-60 dB	-80 dB
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-)	0.02 %	0.02 %
Temperature error of internal compensation		±6 °C
Operational error limit in overall temperature range
в—Џ Voltage, relative to input range, (+/-)	0.4 %	0.5 %
в—Џ Current, relative to input range, (+/-)	0.4 %	0.5 %
в—Џ Resistance, relative to input range, (+/-)		0.5 %
в—Џ Resistance thermometer, relative to input range, (+/-)		Ptxxx standard: ±1.5 K, Ptxxx climate: ±0.5 K, Nixxx standard: ±0.5 K, Nixxx climate: ±0.3 K
в—Џ Thermocouple, relative to input range, (+/-)		Type B: > 600 °C ±4.6 K, type E: > -200 °C ±1.5 K, type J: > -210 °C ±1.9 K, type K: > -200 °C ±2.4 K, type N: > -200 °C ±2.9 K, type R: > 0 °C ±4.7 K, type S: > 0 °C ±4.6 K, type T: > -200 °C ±2.4 K
Basic error limit (operational limit at 25 °C)
в—Џ Voltage, relative to input range, (+/-)	0.2 %	0.1 %
в—Џ Current, relative to input range, (+/-)	0.2 %	0.1 %
в—Џ Resistance, relative to input range, (+/-)		0.1 %
в—Џ Resistance thermometer, relative to input range, (+/-)		Ptxxx standard: ±0.7 K, Ptxxx climate: ±0.2 K, Nixxx standard: ±0.3 K, Nixxx climate: ±0.15 K
в—Џ Thermocouple, relative to input range, (+/-)		Type B: > 600 °C ±1.7 K, type E: > -200 °C ±0.7 K, type J: > -210 °C ±0.8 K, type K: > -200 °C ±1.2 K, type N: > -200 °C ±1.2 K, type R: > 0 °C ±1.9 K, type S: > 0 °C ±1.9 K, type T: > -200 °C ±0.8 K
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
в—Џ Series mode interference (peak value of interference < rated value of input range), min.		40 dB
в—Џ Common mode voltage, max.	10 V	10 V
в—Џ Common mode interference, min.	60 dB; at 400 Hz: 50 dB	60 dB
Isochronous mode
Isochronous operation (application synchronized up to terminal)	Yes
Filtering and processing time (TCI), min.	80 µs
Bus cycle time (TDP), min.	250 µs
Interrupts/diagnostics/status information
Diagnostics function	Yes	Yes
Alarms
в—Џ Diagnostic alarm	Yes	Yes
в—Џ Limit value alarm	Yes; two upper and two lower limit values in each case	Yes; two upper and two lower limit values in each case
Diagnostic messages
в—Џ Monitoring the supply voltage	Yes	Yes
в—Џ Wire-break	Yes; only for 1 ... 5 V and 4 ... 20 mA	Yes; Only for 1 to 5 V, 4 to 20 mA, TC, R, and RTD
в—Џ Overflow/underflow	Yes	Yes
Diagnostics indication LED
в—Џ RUN LED		Yes; Green LED
в—Џ ERROR LED		Yes; Red LED
в—Џ Monitoring of the supply voltage (PWR-LED)	Yes; Green LED	Yes; Green LED
в—Џ Channel status display	Yes; Green LED	Yes; Green LED
в—Џ for channel diagnostics	Yes; Red LED	Yes; Red LED
в—Џ for module diagnostics	Yes; Red LED	Yes; Red LED
Potential separation
Potential separation channels
в—Џ between the channels	No	No
в—Џ between the channels, in groups of	8	8
в—Џ between the channels and backplane bus	Yes	Yes
в—Џ between the channels and the power supply of the electronics	Yes	Yes
Permissible potential difference
between the inputs (UCM)	20 V DC	20 V DC
Between the inputs and MANA (UCM)	10 V DC	10 V DC
Isolation
Isolation tested with	707 V DC (type test) and according to EN 50155 (routine test)	707 V DC (type test) and according to EN 50155 (routine test)
Standards, approvals, certificates
Railway application
в—Џ EN 50121-3-2	Yes; EMC for rail vehicles	Yes; EMC for rail vehicles
в—Џ EN 50121-4	Yes; EMC for signal and telecommunications systems	Yes; EMC for signal and telecommunications systems
в—Џ EN 50124-1	Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.5 kV; UNm = 24 V DC	Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.5 kV; UNm = 24 V DC
в—Џ EN 50125-1	Yes; Rail vehicles - see ambient conditions	Yes; Rail vehicles - see ambient conditions
в—Џ EN 50125-2	Yes; Stationary electrical equipment - see ambient conditions	Yes; Stationary electrical equipment - see ambient conditions
в—Џ EN 50125-3	Yes; Signal and telecommunications systems - see ambient conditions; vibrations and shocks: Application point outside of tracks (1 m to 3 m away from track)	Yes; Signal and telecommunications systems - see ambient conditions; vibrations and shocks: Application point outside of tracks (1 m to 3 m away from track)
в—Џ EN 50155	Yes; Rail vehicles - temperature class T1, horizontal mounting position, salt spray Class ST2	Yes; Rail vehicles - temperature class T1, horizontal mounting position, salt spray Class ST2
в—Џ EN 61373	Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B	Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B
в—Џ Fire protection acc. to EN 45545-2	Yes; Rail vehicles - verification on request	Yes; Rail vehicles - verification on request
Ambient conditions
Ambient temperature during operation
в—Џ horizontal installation, min.	-40 °C; = Tmin; Startup @ -25 °C	-40 °C; = Tmin; Startup @ -25 °C
в—Џ horizontal installation, max.	70 °C; = Tmax; > +60 °C max. 4x ±20 mA or 4x ±10 V permissible	70 °C; = Tmax; > +60 °C max. 2x ±20 mA or 4x ±10 V or 4x RTD permissible
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Use on land craft, rail vehicles and special-purpose vehicles
вЂ” to biologically active substances according to EN 60721-3-5	Yes; Class 5B2 mold, fungus and dry rot spores (with the exception of fauna); Class 5B3 on request	Yes; Class 5B2 mold, fungus and dry rot spores (with the exception of fauna); Class 5B3 on request
вЂ” to chemically active substances according to EN 60721-3-5	Yes; Class 5C3 (RH < 75%) including salt spray according to EN 50155 (ST2). The supplied plug covers must remain in place over the unused interfaces during operation!	Yes; Class 5C3 (RH < 75%) including salt spray according to EN 50155 (ST2). The supplied plug covers must remain in place over the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-5	Yes; Class 5S3 including sand and dust. The supplied plug covers must remain in place over the unused interfaces during operation!	Yes; Class 5S3 including sand and dust. The supplied plug covers must remain in place over the unused interfaces during operation!
Decentralized operation
Fast Startup supported		No
Prioritized startup	No
Dimensions
Width	35 mm	35 mm
Height	147 mm	147 mm
Depth	129 mm	129 mm
Weights
Weight, approx.	200 g	310 g
Other
Note:	For use in railway applications, also observe the product information "SIPLUS extreme RAIL" A5E37661960A Online Support article 109736776	For use in railway applications, also observe the product information "SIPLUS extreme RAIL" A5E37661960A Online Support article 109736776

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания