The new SIMATIC IPC477D PRO is a compact device with a high-quality aluminum housing.

Basic design

• Rugged aluminum housing, resistant to vibration and shock, with high electromagnetic compatibility
• Graphics onboard for additional monitor/flat panel (DVI and DisplayPort):
  • DisplayPort resolution: up to 1 920 x 1 200 / true color / 60 to 120 Hz
  • DVI-I resolution: up to 1 920 x 1 200 Pixel / true color
• Interfaces:
  • 2 x LAN 10/100/1000 Mbit/s Ethernet interface (RJ45)
  • 4 x high-speed USB V3.0
  • 1 x COM1 (RS232)
• Isolated power supply: 24 V DC (19.2 to 28.8 V)

Computer unit configurations

• Processor:
  • Celeron 827E; 1.4 GHz, 1.5 MB cache
  • Core i3-3217UE; 2 x 1.6 GHz, 3 MB cache
  • Core i7-3517UE; 2 x 1.7 GHz (turbo boost up to 2.8 GHz), 3 MB cache
• Main memory expansion 1 GB (2/4/8 GB optional), DDR3 SDRAM
• Field bus
  • PROFINET onboard, 3 x RJ45, compatible with CP 1616
  • PROFIBUS DP/MPI on board, CP 5622-compatible (due to high compatibility, the PROFIBUS option is not available for 15" 477D PRO)
• Drives:
  • Solid-state drive, 80 GB, 240 GB or 480 GB, rugged alternative to hard disk
  • Flash drive (replaceable, accessible): 2 GB, 4 GB, 8 GB or 16 GB
  • Flash drive (internal): 2 GB, 4 GB, 8 GB, 16 GB
• Preinstalled operating systems:
  • Windows 7 Ultimate MUI
  • Windows Embedded Standard 7

Components of the operator control unit:

The operator control units are available in the following versions:

• 15" multi-touch (1 366 x 768)
  • Prepared for support arm without extension components (flange on top)
  • Prepared for pedestal/extension components (flange below)
  • Prepared for support arm and extension components (round tube connection)
• 19" multi-touch (1 366 x 768)
  • Prepared for support arm without extension components (flange on top)
  • Prepared for pedestal/extension components (flange below)
  • Prepared for support arm and extension components (round tube connection)
• 22" multi-touch (1 920 x 1 080)
  • Prepared for support arm without extension components (flange on top)
  • Prepared for pedestal/extension components (flange below)
  • Prepared for support arm and extension components (round tube connection)

The integration of operator controls in the new Extension Units enables customers to implement a large variety of operating scenarios:

Example: Extension Unit equipped with operator controls

Version prepared for support arm without extension components (flange on top)

Version prepared for pedestal/extension components (flange below)

Version prepared for support arm and extension components (round tube connection)

SIMATIC IPC DiagMonitor

• PC diagnostics/alarm software for early detection and diagnosis of PC problems
• Comprehensive monitoring of temperature, watchdog
• Operating hours counter for preventive maintenance
• Integrated protocol function, extensive text messages, online help (German/English), network-wide monitoring via SNMP and OPC interface possible