Power output module (POM) . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Power output module (POM)

| | | | |

Article number	6BK1943-2AA00-0AA0	6BK1943-2AA00-0AA2	6BK1943-2BA00-0AA0	6BK1943-2BA00-0AA2	6BK1943-2CA00-0AA0	6BK1943-2CA00-0AA2	6BK1943-2DA00-0AA0	6BK1943-2DA00-0AA2
	HCS POM4320 BUSBAR MOUNTING (IEC)	HCS POM4320 busbar mounting (IEC)	HCS POM4320 BUSBAR MOUNTING (UL)	HCS POM4320 busbar mounting (UL)	HCS POM4320 PANEL MOUNTING (IEC)	HCS POM4320 panel mounting (IEC)	HCS POM4320 PANEL MOUNTING (UL)	HCS POM4320 panel mounting (UL)
General information
Product brand name	SIPLUS
Type of control of heat emitters	Half-wave control and soft start
Installation type/mounting
Mounting type	Busbar mounting				Backplane mounting
Mounting position	vertical
Type of ventilation	Self-ventilation
Supply voltage
Type of supply voltage	AC
Rated value (AC)	400 V
Relative negative tolerance	10 %
Relative positive tolerance	30 %
Line frequency
в—Џ Rated value 1	50 Hz
в—Џ Rated value 2	60 Hz
в—Џ Relative symmetrical tolerance	5 %
Mains buffering
в—Џ Recovery time after power failure, typ.	1 s
Resistance thermometer (RTD)
в—Џ Design of electrical connection for supply voltage	Busbar adapter, 3-pole + PE				Terminal, 3-pin
вЂ” Connectable conductor cross-sections, solid					1x (1.5 ... 50 mmІ)
вЂ” Connectable conductor cross-sections, finely stranded with wire end processing					1x (1.5 ... 35 mmІ)
вЂ” Connectable conductor cross-sections for AWG cables					1x (16 ... 1)
Power supply for the electronics
Design of the power supply	Power supply via CIM
Power
Active power input, max.	8 W
Power electronics
Type of load	Ohmic load
Power capacity, max.	69.1 kW		51.8 kW	64.8 kW	69.1 kW		51.8 kW	64.8 kW
в—Џ for delta connection with fan at 40 °C, max.	69.1 kW		51.8 kW	64.8 kW	69.1 kW		51.8 kW	64.8 kW
Switching capacity current per phase, max.	83 A		63 A	80 A	83 A		63 A	80 A
Short-time withstand current (SCCR) acc. to UL 508A			50 kA	100 kA			50 kA	100 kA
Heating power
в—Џ Number of digital outputs	9
в—Џ Number of heat emitters per output, max.	1
в—Џ Output voltage for heating power	400 V
в—Џ Power carrying capacity per output, min.	200 W
в—Џ Power carrying capacity per output, max.	7 680 W		5 760 W	7 200 W	7 680 W		5 760 W	7 200 W
вЂ” for heating elements with high inrush current, max.	4 000 W		3 000 W	4 000 W			3 000 W	4 000 W
в—Џ Output current for heating power	16 A		12 A	15 A	16 A		12 A	15 A
в—Џ Peak current	150 A		100 A	150 A			100 A	150 A
в—Џ Melting I2t value	250 AІ·s		225 AІ·s	400 AІ·s	250 AІ·s		225 AІ·s	400 AІ·s
в—Џ Design of short-circuit protection per output	Fuse 16 A		Fuse 15 A	Melting fuse 20 A	Fuse 16 A		Fuse 15 A	Melting fuse 20 A
в—Џ Design of overvoltage protection	Transil Diode
Integration and conversion time/resolution per channel
в—Џ Design of electrical connection at output for heating and fan	Connector, 3-pole with spring-loaded connection
вЂ” Connectable conductor cross-sections, solid	1x (0.2 ... 10 mmІ)
вЂ” Connectable conductor cross-sections, finely stranded with wire end processing	1x (0.25 ... 6 mmІ)
вЂ” Connectable conductor cross-sections for AWG cables, stranded	1x (24 ... 8)
Interfaces
Interfaces/bus type	system interface
Interrupts/diagnostics/status information
Number of status displays	12
LED status display	LED green = ready, LED yellow = heating on/off, LED red = error display, LED red = error for each channel
Diagnostics function	Voltage diagnostics
Diagnostic messages
в—Џ Wire-break	Yes
в—Џ Fuse blown	Yes
в—Џ Heat emitter defect	Yes
Integrated Functions
Monitoring functions
в—Џ Temperature monitoring	Yes
в—Џ Type of temperature monitoring	NTC thermistor
Measuring functions
в—Џ Voltage measurement	Yes
Potential separation
Design of electrical isolation	Optocoupler and/or protective impedance between main circuit and PELV
between the outputs	No
Isolation
Overvoltage category	III
Degree of pollution	2
EMC
EMC interference emission	Limit value in accordance with IEC 61000-6-4:2007 + A1:2011
Electrostatic discharge acc. to IEC 61000-4-2	4 kV contact discharge / 8 kV air discharge
Field-related interference acc. to IEC 61000-4-3	10 V/m (80 ... 1 000 MHz), 3 V/m (1.4 ... 2.0 GHz), 1 V/m (2.0 ... 2.7 GHz)
Conducted interference due to burst acc. to IEC 61000-4-4	2 kV power supply lines, 2 kV load lines
Conducted interference due to surge acc. to IEC 61000-4-5	on supply and load lines: 1 kV symmetric, 2 kV unsymmetric
Conducted interference due to high-frequency radiation acc. to IEC 61000-4-6	10 V (0.15 ... 80 MHz)
Degree and class of protection
IP degree of protection	IP20
Standards, approvals, certificates
CE mark	Yes
UL approval	Yes
RCM (formerly C-TICK)	Yes
KC approval	Yes
EAC (formerly Gost-R)	Yes
China RoHS compliance	Yes
Device tag according to DIN EN 81346-2	Q
Ambient conditions
Ambient temperature during operation
в—Џ min.	0 °C
в—Џ max.	55 °C
Ambient temperature during storage/transportation
в—Џ Storage, min.	-25 °C
в—Џ Storage, max.	70 °C
в—Џ Transportation, min.	-25 °C
в—Џ Transportation, max.	70 °C
Air pressure acc. to IEC 60068-2-13
в—Џ Operation, min.	860 hPa
в—Џ Operation, max.	1 080 hPa
в—Џ Storage, min.	660 hPa
в—Џ Storage, max.	1 080 hPa
в—Џ Installation altitude above sea level, max.	2 000 m
Relative humidity
в—Џ Operation at 25 в„ѓ, max.	95 %
в—Џ Operation at 50 в„ѓ, max.	50 %; 95 % at 25 °C, decreasing linearly to 50 % at 50 °C
Vibrations
в—Џ Vibration resistance during operation acc. to IEC 60068-2-6	10 ... 58 Hz / 0.075 mm, 58 ... 150 Hz / 1 g
в—Џ Vibration resistance during storage acc. to IEC 60068-2-6	5 ... 8.5 Hz / 3.5 mm, 8.5 ... 500 Hz / 1 g
Shock testing
в—Џ Shock resistance during operation acc. to IEC 60068-2-27	15 g / 11 ms / 3 shocks/axis
в—Џ Shock resistance during storage acc. to IEC 60068-2-29	25 g / 6 ms / 1 000 shocks/axis
Dimensions
Width	104 mm
Height	340 mm				344 mm
Depth	250 mm				217 mm