SIPLUS S7-300 CPU 314C-2 PN/DP . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS S7-300 CPU 314C-2 PN/DP

| | | | | | |

Article number		6AG1314-6EH04-7AB0
		SIPLUS S7-300 CPU314C-2PN/DP
General information
HW functional status		01
Firmware version		V3.3
Engineering with
в—Џ Programming package		STEP 7 V5.5 or higher with HSP 191
Supply voltage
Rated value (DC)
в—Џ 24 V DC		Yes
permissible range, lower limit (DC)		19.2 V
permissible range, upper limit (DC)		28.8 V
external protection for power supply lines (recommendation)		Miniature circuit breaker, type C; min. 2 A; miniature circuit breaker type B, min. 4 A
Mains buffering
в—Џ Mains/voltage failure stored energy time		5 ms
в—Џ Repeat rate, min.		1 s
Load voltage L+
Digital inputs
вЂ” Rated value (DC)		24 V
вЂ” Reverse polarity protection		Yes
Digital outputs
вЂ” Rated value (DC)		24 V
вЂ” Reverse polarity protection		No
Input current
Current consumption (rated value)		850 mA
Current consumption (in no-load operation), typ.		190 mA
Inrush current, typ.		5 A
IІt		0.7 AІ·s
Digital inputs
в—Џ from load voltage L+ (without load), max.		80 mA
Digital outputs
в—Џ from load voltage L+, max.		50 mA
Power loss
Power loss, typ.		14 W
Memory
Work memory
в—Џ integrated		192 kbyte
в—Џ expandable		No
в—Џ Size of retentive memory for retentive data blocks		64 kbyte
Load memory
в—Џ Plug-in (MMC)		Yes
в—Џ Plug-in (MMC), max.		8 Mbyte
в—Џ Data management on MMC (after last programming), min.		10 y
Backup
в—Џ present		Yes; Guaranteed by MMC (maintenance-free)
в—Џ without battery		Yes; Program and data
CPU processing times
for bit operations, typ.		0.06 µs
for word operations, typ.		0.12 µs
for fixed point arithmetic, typ.		0.16 µs
for floating point arithmetic, typ.		0.59 µs
CPU-blocks
Number of blocks (total)		1 024; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used.
DB
в—Џ Number, max.		1 024; Number range: 1 to 16000
в—Џ Size, max.		64 kbyte
FB
в—Џ Number, max.		1 024; Number range: 0 to 7999
в—Џ Size, max.		64 kbyte
FC
в—Џ Number, max.		1 024; Number range: 0 to 7999
в—Џ Size, max.		64 kbyte
OB
в—Џ Description		see instruction list
в—Џ Size, max.		64 kbyte
в—Џ Number of free cycle OBs		1; OB 1
в—Џ Number of time alarm OBs		1; OB 10
в—Џ Number of delay alarm OBs		2; OB 20, 21
в—Џ Number of cyclic interrupt OBs		4; OB 32, 33, 34, 35
в—Џ Number of process alarm OBs		1; OB 40
в—Џ Number of DPV1 alarm OBs		3; OB 55, 56, 57
в—Џ Number of isochronous mode OBs		1; OB 61; only for PROFINET
в—Џ Number of startup OBs		1; OB 100
в—Џ Number of asynchronous error OBs		6; OB 80, 82, 83, 85, 86, 87 (OB83 only for PROFINET IO)
в—Џ Number of synchronous error OBs		2; OB 121, 122
Nesting depth
в—Џ per priority class		16
в—Џ additional within an error OB		4
Counters, timers and their retentivity
S7 counter
в—Џ Number		256
Retentivity
вЂ” adjustable		Yes
вЂ” lower limit		0
вЂ” upper limit		255
вЂ” preset		Z 0 to Z 7
Counting range
вЂ” can be set		Yes
вЂ” lower limit		0
вЂ” upper limit		999
IEC counter
в—Џ Number		Unlimited (limited only by RAM capacity)
S7 times
в—Џ Number		256
Retentivity
вЂ” adjustable		Yes
вЂ” lower limit		0
вЂ” upper limit		255
вЂ” preset		No retentivity
Time range
вЂ” lower limit		10 ms
вЂ” upper limit		9 990 s
IEC timer
в—Џ present		Yes
в—Џ Type		SFB
в—Џ Number		Unlimited (limited only by RAM capacity)
Data areas and their retentivity
retentive data area in total		All, max. 64 KB
Flag
в—Џ Number, max.		256 byte
в—Џ Retentivity available		Yes; MB 0 to MB 255
в—Џ Retentivity preset		MB 0 to MB 15
в—Џ Number of clock memories		8; 1 memory byte
Data blocks
в—Џ Retentivity adjustable		Yes; via non-retain property on DB
в—Џ Retentivity preset		Yes
Local data
в—Џ per priority class, max.		32 kbyte; Max. 2048 bytes per block
Address area
I/O address area
в—Џ Inputs		2 048 byte
в—Џ Outputs		2 048 byte
of which distributed
вЂ” Inputs		2 003 byte
вЂ” Outputs		2 010 byte
Process image
в—Џ Inputs		2 048 byte
в—Џ Outputs		2 048 byte
в—Џ Inputs, adjustable		2 048 byte
в—Џ Outputs, adjustable		2 048 byte
в—Џ Inputs, default		256 byte
в—Џ Outputs, default		256 byte
Default addresses of the integrated channels
вЂ” Digital inputs		136.0 to 138.7
вЂ” Digital outputs		136.0 to 137.7
вЂ” Analog inputs		800 to 809
вЂ” Analog outputs		800 to 803
Subprocess images
в—Џ Number of subprocess images, max.		1; With PROFINET IO, the length of the user data is limited to 1600 bytes
Digital channels
в—Џ Inputs		16 048
вЂ” of which central		1 016
в—Џ Outputs		16 096
вЂ” of which central		1 008
Analog channels
в—Џ Inputs		1 006
вЂ” of which central		253
в—Џ Outputs		1 007
вЂ” of which central		250
Hardware configuration
Number of expansion units, max.		3
Number of DP masters
в—Џ integrated		1
в—Џ via CP		4
Number of operable FMs and CPs (recommended)
в—Џ FM		8
в—Џ CP, PtP		8
в—Џ CP, LAN		10
Rack
в—Џ Racks, max.		4
в—Џ Modules per rack, max.		8; In rack 3 max. 7
Time of day
Clock
в—Џ Hardware clock (real-time)		Yes
в—Џ retentive and synchronizable		Yes
в—Џ Backup time		6 wk; At 40 °C ambient temperature
в—Џ Deviation per day, max.		10 s; Typ.: 2 s
в—Џ Behavior of the clock following POWER-ON		Clock continues running after POWER OFF
в—Џ Behavior of the clock following expiry of backup period		Clock continues to run with the time at which the power failure occurred
Operating hours counter
в—Џ Number		1
в—Џ Number/Number range		0
в—Џ Range of values		0 to 2^31 hours (when using SFC 101)
в—Џ Granularity		1 hour
в—Џ retentive		Yes; Must be restarted at each restart
Clock synchronization
в—Џ supported		Yes
в—Џ to MPI, master		Yes
в—Џ to MPI, slave		Yes
в—Џ to DP, master		Yes; With DP slave only slave clock
в—Џ to DP, slave		Yes
в—Џ in AS, master		Yes
в—Џ in AS, slave		Yes
в—Џ on Ethernet via NTP		Yes; As client
Digital inputs
Number of digital inputs		24
в—Џ of which inputs usable for technological functions		16
integrated channels (DI)		24
Input characteristic curve in accordance with IEC 61131, type 1		Yes
horizontal installation
вЂ” up to 40 °C, max.		24
вЂ” up to 60 °C, max.		12; up to 70 °C
vertical installation
вЂ” up to 40 °C, max.		12
Input voltage
в—Џ Rated value (DC)		24 V
в—Џ for signal "0"		-3 to +5V
в—Џ for signal "1"		+15 to +30V
Input current
в—Џ for signal "1", typ.		8 mA
Input delay (for rated value of input voltage)
for standard inputs
вЂ” parameterizable		Yes; 0.1 / 0.3 / 3 / 15 ms (You can reconfigure the input delay of the standard inputs during program runtime. Please note that under certain circumstances your newly set filter time may not be effective until the next filter cycle.)
вЂ” Rated value		3 ms
for counter/technological functions
вЂ” at "0" to "1", max.		8 µs; Minimum pulse width/minimum pause between pulses at maximum counting frequency
Cable length
в—Џ shielded, max.		1 000 m; 50 m for technological functions
в—Џ unshielded, max.		600 m; For technological functions: No
for technological functions
вЂ” shielded, max.		50 m; at maximum count frequency
вЂ” unshielded, max.		not allowed
Digital outputs
Number of digital outputs		16
в—Џ of which high-speed outputs		4; Notice: You cannot connect the fast outputs of your CPU in parallel
integrated channels (DO)		16
Short-circuit protection
в—Џ Response threshold, typ.		1 A
Limitation of inductive shutdown voltage to		L+ (-48 V)
Controlling a digital input		Yes
Switching capacity of the outputs
в—Џ on lamp load, max.		5 W
Load resistance range
в—Џ lower limit		48 в„¦
в—Џ upper limit		4 kв„¦
Output voltage
в—Џ for signal "1", min.		L+ (-0.8 V)
Output current
в—Џ for signal "1" rated value		500 mA
в—Џ for signal "1" permissible range, min.		5 mA
в—Џ for signal "1" permissible range, max.		0.6 A
в—Џ for signal "1" minimum load current		5 mA
в—Џ for signal "0" residual current, max.		0.5 mA
Parallel switching of two outputs
в—Џ for uprating		No
в—Џ for redundant control of a load		Yes
Switching frequency
в—Џ with resistive load, max.		100 Hz
в—Џ with inductive load, max.		0.5 Hz
в—Џ on lamp load, max.		100 Hz
в—Џ of the pulse outputs, with resistive load, max.		2.5 kHz
horizontal installation
вЂ” up to 40 °C, max.		3 A
вЂ” up to 60 °C, max.		2 A; 1.5 A @ > 60 °C
vertical installation
вЂ” up to 40 °C, max.		2 A
Cable length
в—Џ shielded, max.		1 000 m
в—Џ unshielded, max.		600 m
Analog inputs
Number of analog inputs		5
в—Џ For voltage/current measurement		4
в—Џ For resistance/resistance thermometer measurement		1
integrated channels (AI)		5; 4 x current/voltage, 1 x resistance
permissible input voltage for current input (destruction limit), max.		5 V; Permanent
permissible input voltage for voltage input (destruction limit), max.		30 V; Permanent
permissible input current for voltage input (destruction limit), max.		0.5 mA; Permanent
permissible input current for current input (destruction limit), max.		50 mA; Permanent
No-load voltage, typ.		3.3 V
Constant measurement current for resistance-type transmitter, typ.		1.25 mA
Technical unit for temperature measurement adjustable		Yes; Degrees Celsius / degrees Fahrenheit / Kelvin
Input ranges
в—Џ Voltage		Yes; ±10 V / 100 kО©; 0 V to 10 V / 100 kО©
в—Џ Current		Yes; ±20 mA / 100 О©; 0 mA to 20 mA / 100 О©; 4 mA to 20 mA / 100 О©
в—Џ Resistance thermometer		Yes; Pt 100 / 10 MО©
в—Џ Resistance		Yes; 0 О© to 600 О© / 10 MО©
Input ranges (rated values), voltages
в—Џ 0 to +10 V		Yes
в—Џ Input resistance (0 to 10 V)		100 kв„¦
Input ranges (rated values), currents
в—Џ 0 to 20 mA		Yes
в—Џ Input resistance (0 to 20 mA)		100 в„¦
в—Џ -20 mA to +20 mA		Yes
в—Џ Input resistance (-20 mA to +20 mA)		100 в„¦
в—Џ 4 mA to 20 mA		Yes
в—Џ Input resistance (4 mA to 20 mA)		100 в„¦
Input ranges (rated values), resistance thermometer
в—Џ Pt 100		Yes
в—Џ Input resistance (Pt 100)		10 Mв„¦
Input ranges (rated values), resistors
в—Џ 0 to 600 ohms		Yes
в—Џ Input resistance (0 to 600 ohms)		10 Mв„¦
Thermocouple (TC)
Temperature compensation
вЂ” parameterizable		No
Characteristic linearization
в—Џ parameterizable		Yes; by software
вЂ” for resistance thermometer		Pt 100
Cable length
в—Џ shielded, max.		100 m
Analog outputs
Number of analog outputs		2
integrated channels (AO)		2
Voltage output, short-circuit protection		Yes
Voltage output, short-circuit current, max.		55 mA
Current output, no-load voltage, max.		14 V
Output ranges, voltage
в—Џ 0 to 10 V		Yes
в—Џ -10 V to +10 V		Yes
Output ranges, current
в—Џ 0 to 20 mA		Yes
в—Џ -20 mA to +20 mA		Yes
в—Џ 4 mA to 20 mA		Yes
Connection of actuators
в—Џ for voltage output two-wire connection		Yes; Without compensation of the line resistances
в—Џ for voltage output four-wire connection		No
в—Џ for current output two-wire connection		Yes
Load impedance (in rated range of output)
в—Џ with voltage outputs, min.		1 kв„¦
в—Џ with voltage outputs, capacitive load, max.		0.1 µF
в—Џ with current outputs, max.		300 в„¦
в—Џ with current outputs, inductive load, max.		0.1 mH
Destruction limits against externally applied voltages and currents
в—Џ Voltages at the outputs towards MANA		16 V; Permanent
в—Џ Current, max.		50 mA; Permanent
Cable length
в—Џ shielded, max.		200 m
Analog value generation for the inputs
Measurement principle		Actual value encryption (successive approximation)
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.		12 bit
в—Џ Integration time, parameterizable		Yes; 16.6 / 20 ms
в—Џ Interference voltage suppression for interference frequency f1 in Hz		50 / 60 Hz
в—Џ permissible input frequency, max.		400 Hz
в—Џ Time constant of the input filter		0.38 ms
в—Џ Basic execution time of the module (all channels released)		1 ms
Analog value generation for the outputs
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.		12 bit
в—Џ Conversion time (per channel)		1 ms
Settling time
в—Џ for resistive load		0.6 ms
в—Џ for capacitive load		1 ms
в—Џ for inductive load		0.5 ms
Encoder
Connection of signal encoders
в—Џ for voltage measurement		Yes
в—Џ for current measurement as 2-wire transducer		Yes; with external supply
в—Џ for current measurement as 4-wire transducer		Yes
в—Џ for resistance measurement with two-wire connection		Yes; Without compensation of the line resistances
в—Џ for resistance measurement with three-wire connection		No
в—Џ for resistance measurement with four-wire connection		No
Connectable encoders
в—Џ 2-wire sensor		Yes
вЂ” permissible quiescent current (2-wire sensor), max.		1.5 mA
Errors/accuracies
Temperature error (relative to input range), (+/-)		0.006 %/K
Crosstalk between the inputs, min.		60 dB
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-)		0.06 %
Output ripple (relative to output range, bandwidth 0 to 50 kHz), (+/-)		0.1 %
Linearity error (relative to output range), (+/-)		0.15 %
Temperature error (relative to output range), (+/-)		0.01 %/K
Crosstalk between the outputs, min.		60 dB
Repeat accuracy in steady state at 25 °C (relative to output range), (+/-)		0.06 %
Operational error limit in overall temperature range
в—Џ Voltage, relative to input range, (+/-)		1.6 %
в—Џ Current, relative to input range, (+/-)		1.6 %
в—Џ Resistance, relative to input range, (+/-)		1.6 %
в—Џ Voltage, relative to output range, (+/-)		1.6 %
в—Џ Current, relative to output range, (+/-)		1.6 %
Basic error limit (operational limit at 25 °C)
в—Џ Voltage, relative to input range, (+/-)		0.8 %; Linearity error ±0.06 %
в—Џ Current, relative to input range, (+/-)		0.8 %; Linearity error ±0.06 %
в—Џ Resistance, relative to input range, (+/-)		0.8 %; Linearity error ±0.2 %
в—Џ Resistance thermometer, relative to input range, (+/-)		0.8 %
в—Џ Voltage, relative to output range, (+/-)		0.8 %
в—Џ Current, relative to output range, (+/-)		0.8 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
в—Џ Series mode interference (peak value of interference < rated value of input range), min.		30 dB
в—Џ Common mode interference, min.		40 dB
Interfaces
Number of industrial Ethernet interfaces		1; 2 ports (switch) RJ45
Number of PROFINET interfaces		1; 2 ports (switch) RJ45
Number of RS 485 interfaces		1; Combined MPI / PROFIBUS DP
Number of RS 422 interfaces		0
1. Interface
Interface type		Integrated RS 485 interface
Physics		RS 485
Isolated		Yes
Power supply to interface (15 to 30 V DC), max.		200 mA
Functionality
в—Џ MPI		Yes
в—Џ PROFIBUS DP master		Yes
в—Џ PROFIBUS DP slave		Yes
в—Џ Point-to-point connection		No
MPI
в—Џ Transmission rate, max.		12 Mbit/s
Services
вЂ” PG/OP communication		Yes
вЂ” Routing		Yes
вЂ” Global data communication		Yes
вЂ” S7 basic communication		Yes
вЂ” S7 communication		Yes
вЂ” S7 communication, as client		No; but via CP and loadable FB
вЂ” S7 communication, as server		Yes
DP master
в—Џ Transmission rate, max.		12 Mbit/s
в—Џ Number of DP slaves, max.		124
Services
вЂ” PG/OP communication		Yes
вЂ” Routing		Yes
вЂ” Global data communication		No
вЂ” S7 basic communication		Yes; I blocks only
вЂ” S7 communication		Yes
вЂ” S7 communication, as client		No
вЂ” S7 communication, as server		Yes
вЂ” Equidistance		Yes
вЂ” Isochronous mode		No
вЂ” SYNC/FREEZE		Yes
вЂ” Activation/deactivation of DP slaves		Yes
вЂ” Number of DP slaves that can be simultaneously activated/deactivated, max.		8
вЂ” Direct data exchange (slave-to-slave communication)		Yes; As subscriber
вЂ” DPV1		Yes
Address area
вЂ” Inputs, max.		2 kbyte
вЂ” Outputs, max.		2 kbyte
User data per DP slave
вЂ” Inputs, max.		244 byte
вЂ” Outputs, max.		244 byte
DP slave
в—Џ Transmission rate, max.		12 Mbit/s
в—Џ automatic baud rate search		Yes; only with passive interface
в—Џ Address area, max.		32
в—Џ User data per address area, max.		32 byte
Services
вЂ” PG/OP communication		Yes
вЂ” Routing		Yes; Only with active interface
вЂ” Global data communication		No
вЂ” S7 basic communication		No
вЂ” S7 communication		Yes
вЂ” S7 communication, as client		No
вЂ” S7 communication, as server		Yes; Connection configured on one side only
вЂ” Direct data exchange (slave-to-slave communication)		Yes
вЂ” DPV1		No
Transfer memory
вЂ” Inputs		244 byte
вЂ” Outputs		244 byte
2. Interface
Interface type		PROFINET
Physics		Ethernet RJ45
Isolated		Yes
automatic detection of transmission rate		Yes; 10/100 Mbit/s
Autonegotiation		Yes
Autocrossing		Yes
Change of IP address at runtime, supported		Yes
Interface types
в—Џ Number of ports		2
в—Џ integrated switch		Yes
Media redundancy
в—Џ supported		Yes
в—Џ Switchover time on line break, typ.		200 ms; PROFINET MRP
в—Џ Number of stations in the ring, max.		50
Functionality
в—Џ MPI		No
в—Џ PROFINET IO Controller		Yes; Also simultaneously with IO-Device functionality
в—Џ PROFINET IO Device		Yes; Also simultaneously with IO Controller functionality
в—Џ PROFINET CBA		Yes
в—Џ PROFIBUS DP master		No
в—Џ PROFIBUS DP slave		No
в—Џ Open IE communication		Yes; Via TCP/IP, ISO on TCP, and UDP
в—Џ Web server		Yes
PROFINET IO Controller
в—Џ Transmission rate, max.		100 Mbit/s
Services
вЂ” PG/OP communication		Yes
вЂ” Routing		Yes
вЂ” S7 communication		Yes; With loadable FBs, max. configurable connections: 10, max. number of instances: 32
вЂ” Isochronous mode		Yes; OB 61
вЂ” Open IE communication		Yes; Via TCP/IP, ISO on TCP, and UDP
вЂ” IRT		Yes
вЂ” Shared device		Yes
вЂ” Prioritized startup		Yes
вЂ” Number of IO devices with prioritized startup, max.		32
вЂ” Number of connectable IO Devices, max.		128
вЂ” Of which IO devices with IRT, max.		64
вЂ” of which in line, max.		64
вЂ” Number of IO Devices with IRT and the option "high flexibility"		128
вЂ” of which in line, max.		61
вЂ” Number of connectable IO Devices for RT, max.		128
вЂ” of which in line, max.		128
вЂ” Activation/deactivation of IO Devices		Yes
вЂ” Number of IO Devices that can be simultaneously activated/deactivated, max.		8
вЂ” IO Devices changing during operation (partner ports), supported		Yes
вЂ” Number of IO Devices per tool, max.		8
вЂ” Device replacement without swap medium		Yes
вЂ” Send cycles		250 Ојs, 500 Ојs,1 ms; 2 ms, 4 ms (not in the case of IRT with "high flexibility" option)
вЂ” Updating time		250 µs to 512 ms (depending on the operating mode, see Manual "S7-300 CPU 31xC and CPU 31x, Technical Data" for more details)
Address area
вЂ” Inputs, max.		2 kbyte
вЂ” Outputs, max.		2 kbyte
вЂ” User data consistency, max.		1 024 byte
PROFINET IO Device
Services
вЂ” PG/OP communication		Yes
вЂ” Routing		Yes
вЂ” S7 communication		Yes; With loadable FBs, max. configurable connections: 10, max. number of instances: 32
вЂ” Isochronous mode		No
вЂ” Open IE communication		Yes; Via TCP/IP, ISO on TCP, and UDP
вЂ” IRT		Yes
вЂ” PROFIenergy		Yes; With SFB 73 / 74 prepared for loadable PROFIenergy standard FB for I-Device
вЂ” Shared device		Yes
вЂ” Number of IO Controllers with shared device, max.		2
Transfer memory
вЂ” Inputs, max.		1 440 byte; Per IO Controller with shared device
вЂ” Outputs, max.		1 440 byte; Per IO Controller with shared device
Submodules
вЂ” Number, max.		64
вЂ” User data per submodule, max.		1 024 byte
PROFINET CBA
в—Џ acyclic transmission		Yes
в—Џ cyclic transmission		Yes
Open IE communication
в—Џ Number of connections, max.		8
в—Џ Local port numbers used at the system end		0, 20, 21, 23, 25, 80, 102, 135, 161, 443, 8080, 34962, 34963, 34964, 65532, 65533, 65534, 65535
в—Џ Keep-alive function, supported		Yes
Protocols
Open IE communication
в—Џ TCP/IP		Yes; via integrated PROFINET interface and loadable FBs
вЂ” Data length for connection type 01H, max.		1 460 byte
вЂ” Data length for connection type 11H, max.		32 768 byte
вЂ” several passive connections per port, supported		Yes
в—Џ ISO-on-TCP (RFC1006)		Yes; via integrated PROFINET interface and loadable FBs
вЂ” Data length, max.		32 768 byte
в—Џ UDP		Yes; via integrated PROFINET interface and loadable FBs
вЂ” Data length, max.		1 472 byte
Web server
в—Џ User-defined websites		Yes
в—Џ Number of HTTP clients		5
Isochronous mode
Isochronous operation (application synchronized up to terminal)		Yes; For PROFINET only
Communication functions
PG/OP communication		Yes
Data record routing		Yes
Global data communication
в—Џ supported		Yes
в—Џ Number of GD loops, max.		8
в—Џ Number of GD packets, max.		8
в—Џ Number of GD packets, transmitter, max.		8
в—Џ Number of GD packets, receiver, max.		8
в—Џ Size of GD packets, max.		22 byte
в—Џ Size of GD packet (of which consistent), max.		22 byte
S7 basic communication
в—Џ supported		Yes
в—Џ User data per job, max.		76 byte
в—Џ User data per job (of which consistent), max.		76 byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server)
S7 communication
в—Џ supported		Yes
в—Џ as server		Yes
в—Џ as client		Yes; via integrated PROFINET interface and loadable FB or via CP and loadable FB
в—Џ User data per job, max.		See online help of STEP 7 (shared parameters of the SFBs/FBs and of the SFCs/FCs of S7 Communication)
S5 compatible communication
в—Џ supported		Yes; via CP and loadable FC
Web server
в—Џ supported		Yes
PROFINET CBA (at set setpoint communication load)
в—Џ Setpoint for the CPU communication load		50 %
в—Џ Number of remote interconnection partners		32
в—Џ Number of functions, master/slave		30
в—Џ Total of all master/slave connections		1 000
в—Џ Data length of all incoming connections master/slave, max.		4 000 byte
в—Џ Data length of all outgoing connections master/slave, max.		4 000 byte
в—Џ Number of device-internal and PROFIBUS interconnections		500
в—Џ Data length of device-internal und PROFIBUS interconnections, max.		4 000 byte
в—Џ Data length per connection, max.		1 400 byte
Remote interconnections with acyclic transmission
вЂ” Sampling frequency: Sampling time, min.		500 ms
вЂ” Number of incoming interconnections		100
вЂ” Number of outgoing interconnections		100
вЂ” Data length of all incoming interconnections, max.		2 000 byte
вЂ” Data length of all outgoing interconnections, max.		2 000 byte
вЂ” Data length per connection, max.		1 400 byte
Remote interconnections with cyclic transmission
вЂ” Transmission frequency: Transmission interval, min.		10 ms
вЂ” Number of incoming interconnections		200
вЂ” Number of outgoing interconnections		200
вЂ” Data length of all incoming interconnections, max.		2 000 byte
вЂ” Data length of all outgoing interconnections, max.		2 000 byte
вЂ” Data length per connection, max.		450 byte
HMI variables via PROFINET (acyclic)
вЂ” Number of stations that can log on for HMI variables (PN OPC/iMap)		3; 2x PN OPC/1x iMap
вЂ” HMI variable updating		500 ms
вЂ” Number of HMI variables		200
вЂ” Data length of all HMI variables, max.		2 000 byte
PROFIBUS proxy functionality
вЂ” supported		Yes
вЂ” Number of linked PROFIBUS devices		16
вЂ” Data length per connection, max.		240 byte; Slave-dependent
Number of connections
в—Џ overall		12
в—Џ usable for PG communication		11
вЂ” reserved for PG communication		1
вЂ” adjustable for PG communication, min.		1
вЂ” adjustable for PG communication, max.		11
в—Џ usable for OP communication		11
вЂ” reserved for OP communication		1
вЂ” adjustable for OP communication, min.		1
вЂ” adjustable for OP communication, max.		11
в—Џ usable for S7 basic communication		8
вЂ” reserved for S7 basic communication		0
вЂ” adjustable for S7 basic communication, min.		0
вЂ” adjustable for S7 basic communication, max.		8
в—Џ usable for S7 communication		10
вЂ” reserved for S7 communication		0
вЂ” adjustable for S7 communication, min.		0
вЂ” adjustable for S7 communication, max.		10
в—Џ total number of instances, max.		32
в—Џ usable for routing		X1 as MPI: max. 10; X1 as DP master: max. 24; X1 as DP slave (active): max. 14; X2 as PROFINET: 24 max.
S7 message functions
Number of login stations for message functions, max.		12; Depending on the configured connections for PG/OP and S7 basic communication
Process diagnostic messages		Yes
simultaneously active Alarm-S blocks, max.		300
Test commissioning functions
Status block		Yes; Up to 2 simultaneously
Single step		Yes
Number of breakpoints		4
Status/control
в—Џ Status/control variable		Yes
в—Џ Variables		Inputs, outputs, memory bits, DB, times, counters
в—Џ Number of variables, max.		30
вЂ” of which status variables, max.		30
вЂ” of which control variables, max.		14
Forcing
в—Џ Forcing		Yes
в—Џ Forcing, variables		Inputs, outputs
в—Џ Number of variables, max.		10
Diagnostic buffer
в—Џ present		Yes
в—Џ Number of entries, max.
вЂ” adjustable		No
вЂ” of which powerfail-proof		100; Only the last 100 entries are retained
в—Џ Number of entries readable in RUN, max.		499
вЂ” can be set		Yes; From 10 to 499
вЂ” preset		10
Service data
в—Џ can be read out		Yes
Interrupts/diagnostics/status information
Diagnostics indication LED
в—Џ Status indicator digital input (green)		Yes
в—Џ Status indicator digital output (green)		Yes
Integrated Functions
Number of counters		4; See "Technological Functions" manual
Counting frequency (counter) max.		60 kHz
Frequency measurement		Yes
Number of frequency meters		4; up to 60 kHz (see "Technological Functions" manual)
controlled positioning		Yes
integrated function blocks (closed-loop control)		Yes; PID controller (see "Technological Functions" manual)
PID controller		Yes
Number of pulse outputs		4; Pulse width modulation up to 2.5 kHz (see "Technological Functions" Manual)
Limit frequency (pulse)		2.5 kHz
Potential separation
Potential separation digital inputs
в—Џ Potential separation digital inputs		Yes
в—Џ between the channels		No
в—Џ between the channels and backplane bus		Yes
Potential separation digital outputs
в—Џ Potential separation digital outputs		Yes
в—Џ between the channels		Yes
в—Џ between the channels, in groups of		8
в—Џ between the channels and backplane bus		Yes
Potential separation analog inputs
в—Џ Potential separation analog inputs		Yes; common for analog I/O
в—Џ between the channels		No
в—Џ between the channels and backplane bus		Yes
Potential separation analog outputs
в—Џ Potential separation analog outputs		Yes; common for analog I/O
в—Џ between the channels		No
в—Џ between the channels and backplane bus		Yes
Permissible potential difference
between different circuits		75 V DC/60 V AC
Between the inputs and MANA (UCM)		8 V DC
between MANA and M internally (UISO)		75 V DC/60 V AC
Isolation
Isolation tested with		600 V DC
Standards, approvals, certificates
CE mark		Yes
FM approval		No
KC approval		Yes
EAC (formerly Gost-R)		Yes
Ambient conditions
Ambient temperature during operation
в—Џ min.		-25 °C; = Tmin
в—Џ max.		70 °C; = Tmax; @ 60°C for UL/ATEX/FM use
Ambient temperature during storage/transportation
в—Џ min.		-40 °C
в—Џ max.		70 °C
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3		Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Configuration
Configuration software
в—Џ STEP 7		Yes; V5.5 or higher
Programming
в—Џ Command set		see instruction list
в—Џ Nesting levels		8
в—Џ System functions (SFC)		see instruction list
в—Џ System function blocks (SFB)		see instruction list
Programming language
вЂ” LAD		Yes
вЂ” FBD		Yes
вЂ” STL		Yes
вЂ” SCL		Yes
вЂ” CFC		Yes
вЂ” GRAPH		Yes
вЂ” HiGraph®		Yes
Know-how protection
в—Џ User program protection/password protection		Yes
в—Џ Block encryption		Yes; With S7 block Privacy
Dimensions
Width		120 mm
Height		125 mm
Depth		130 mm
Weights
Weight, approx.		730 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания