SITRANS P410 pressure transmitters can be used in industrial areas with extreme chemical and mechanical loads. Electromagnetic compatibility in the range 10 kHz to 1 GHz makes the P410 suitable for locations with high electromagnetic emissions.

Pressure transmitters with type of protection "Flameproof enclosure" may be installed in hazardous areas (zone 1) or in zone 0. The pressure transmitters are provided with an EC type examination certificate and comply with the corresponding harmonized European standards (ATEX).

Pressure transmitters with the type of protection "Intrinsic safety" for use in zone 0 may be operated with power supply units of category "ia" and "ib".

The transmitters can be equipped with various designs of remote seals for special applications such as the measurement of highly viscous substances.

The pressure transmitter can be operated locally over 3 input buttons or programmed externally over HART or over PROFIBUS PA or FOUNDATION Fieldbus interface.

Pressure transmitters for gauge pressure

Measured variable: Gauge pressure of aggressive and non-aggressive gases, vapors and liquids.

Span (fully adjustable)
for P410 with HART: 0.01 bar to 160 bar (0.15 psi to 2321 psi)

Nominal measuring range
for P410 with PROFIBUS PA and FOUNDATION Fieldbus: 1 bar to 160 bar (14.5 psi to 2321 psi)

Pressure transmitters for differential pressure and flow

Measured variables:

• Differential pressure
• Small positive or negative overpressure
• Flow q ~ в€љО”p (together with a primary differential pressure device (see section "Flowmeters"))

Span (fully adjustable)
for P410 with HART: 1 mbar to 30 bar (0.0145 to 435 psi)

Nominal measuring range
for P410 with PROFIBUS PA and FOUNDATION Fieldbus: 20 mbar to 30 bar (0.29 to 435 psi)