|
| | | |
Article number | 6ES7194-2LH02-0AA0 | 6ES7194-2LH03-0AA0 | 6ES7194-2LH10-0AA0 | 6ES7194-2LH20-0AA0 |
|---|
| CONNECTING CABLE ET-CONNECTION, 0,19M | CONNECTING CABLE ET-CONNECTION, 0,3M | CONNECTING CABLE ET-CONNECTION, 1,0M | CONNECTING CABLE ET-CONNECTION, 2,0M |
|---|
General information | | | | | Product description | Flexible cable (4-core), preassembled at both ends with 2x M8 plugs, 4-pin, shielded | Flexible cable (4-core), preassembled at both ends with 2x M8 plugs, 4-pin, shielded | Flexible cable (4-core), preassembled at both ends with 2x M8 plugs, 4-pin, shielded | Flexible cable (4-core), preassembled at both ends with 2x M8 plugs, 4-pin, shielded | Suitability for use | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | Degree and class of protection | | | | | Degree of protection acc. to EN 60529 | | | | | | Yes | Yes | Yes | Yes | | Yes | Yes | Yes | Yes | Ambient conditions | | | | | Ambient temperature during assembly, min. | -30C | -30C | -30C | -30C | Ambient temperature during assembly, max. | 80C | 80C | 80C | 80C | Ambient temperature during storage/transportation | | | | | | -40C | -40C | -40C | -40C | | 80C | 80C | 80C | 80C | Cables | | | | | Cable designation | 2Y(ST)CY 1x4x0.5/1.0-100-GN | 2Y(ST)CY 1x4x0.5/1.0-100-GN | 2Y(ST)CY 1x4x0.5/1.0-100-GN | 2Y(ST)CY 1x4x0.5/1.0-100-GN | Design of shield | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Cable length | 0.19m | 0.3m | 1m | 2m | Number of electrical cores | 4 | 4 | 4 | 4 | Outer diameter of inner conductor | 0.5mm | 0.5mm | 0.5mm | 0.5mm | Outer diameter of core insulation | 1mm | 1mm | 1mm | 1mm | Outer diameter of cable sheath | 5mm | 5mm | 5mm | 5mm | Number of bending cycles | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | Permissible bending radius, single bend, min. | 20mm | 20mm | 20mm | 20mm | Permissible bending radius, multiple bends, min. | 40mm | 40mm | 40mm | 40mm | Bending radius for continuous bending | 100mm | 100mm | 100mm | 100mm | Color of cable sheath | Green | Green | Green | Green | Color of core insulation of data cores | white / yellow / blue / orange | white / yellow / blue / orange | white / yellow / blue / orange | white / yellow / blue / orange | Weight per length | 34kg/km | 34kg/km | 34kg/km | 34kg/km | Mechanics/material | | | | | Type of cable outlet | 180 degree cable outlet | 180 degree cable outlet | 180 degree cable outlet | 180 degree cable outlet | Material of housing | metal | metal | metal | metal | Material of cable sheath | PVC | PVC | PVC | PVC | Material of core insulation | PE | PE | PE | PE |
Article number | 6ES7194-2LH50-0AA0 | 6ES7194-2LN10-0AA0 | 6ES7194-2LN15-0AA0 |
|---|
| CONNECTING CABLE ET-CONNECTION, 5,0M | BUS CABLE ET-CONNECTION, 10M | BUS CABLE ET-CONNECTION, 15M |
|---|
General information | | | | Product description | Flexible cable (4-core), preassembled at both ends with 2x M8 plugs, 4-pin, shielded | Flexible cable (4-core), preassembled at both ends with 2x M8 plugs, 4-pin, shielded | Flexible cable (4-core), preassembled at both ends with 2x M8 plugs, 4-pin, shielded | Suitability for use | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | Degree and class of protection | | | | Degree of protection acc. to EN 60529 | | | | | Yes | Yes | Yes | | Yes | Yes | Yes | Ambient conditions | | | | Ambient temperature during assembly, min. | -30C | -30C | -30C | Ambient temperature during assembly, max. | 80C | 80C | 80C | Ambient temperature during storage/transportation | | | | | -40C | -40C | -40C | | 80C | 80C | 80C | Cables | | | | Cable designation | 2Y(ST)CY 1x4x0.5/1.0-100-GN | 2Y(ST)CY 1x4x0.5/1.0-100-GN | 2Y(ST)CY 1x4x0.5/1.0-100-GN | Design of shield | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Cable length | 5m | 10m | 15m | Number of electrical cores | 4 | 4 | 4 | Outer diameter of inner conductor | 0.5mm | 0.5mm | 0.5mm | Outer diameter of core insulation | 1mm | 1mm | 1mm | Outer diameter of cable sheath | 5mm | 5mm | 5mm | Number of bending cycles | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | | Permissible bending radius, single bend, min. | 20mm | 20mm | 20mm | Permissible bending radius, multiple bends, min. | 40mm | 40mm | 40mm | Bending radius for continuous bending | 100mm | 100mm | 100mm | Color of cable sheath | Green | Green | Green | Color of core insulation of data cores | white / yellow / blue / orange | white / yellow / blue / orange | white / yellow / blue / orange | Weight per length | 34kg/km | 34kg/km | 34kg/km | Mechanics/material | | | | Type of cable outlet | 180 degree cable outlet | 180 degree cable outlet | 180 degree cable outlet | Material of housing | metal | metal | metal | Material of cable sheath | PVC | PVC | PVC | Material of core insulation | PE | PE | PE |
Article number | 6ES7194-2MH02-0AA0 | 6ES7194-2MH03-0AA0 | 6ES7194-2MH10-0AA0 | 6ES7194-2MH20-0AA0 |
|---|
| CONNECTING CABLE ET-CONNECTION, 0,19M | CONNECTING CABLE ET-CONNECTION, 0,3M | CONNECTING CABLE ET-CONNECTION, 1,0M | CONNECTING CABLE ET-CONNECTION, 2,0M |
|---|
General information | | | | | Product description | Flexible cable (4-core), preassembled at both ends with 2x M8 plugs, 4-pin, shielded | Flexible cable (4-core), preassembled at both ends with 2x M8 plugs, 4-pin, shielded | Flexible cable (4-core), preassembled at both ends with 2x M8 plugs, 4-pin, shielded | Flexible cable (4-core), preassembled at both ends with 2x M8 plugs, 4-pin, shielded | Suitability for use | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | Degree and class of protection | | | | | Degree of protection acc. to EN 60529 | | | | | | Yes | Yes | Yes | Yes | | Yes | Yes | Yes | Yes | Ambient conditions | | | | | Ambient temperature during assembly, min. | -30C | -30C | -30C | -30C | Ambient temperature during assembly, max. | 80C | 80C | 80C | 80C | Ambient temperature during storage/transportation | | | | | | -40C | -40C | -40C | -40C | | 80C | 80C | 80C | 80C | Cables | | | | | Cable designation | 2Y(ST)C11Y 2x2x0.5/1.0-100-GN | 2Y(ST)C11Y 2x2x0.5/1.0-100-GN | 2Y(ST)C11Y 2x2x0.5/1.0-100-GN | 2Y(ST)C11Y 2x2x0.5/1.0-100-GN | Design of shield | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Cable length | 0.19m | 0.3m | 1m | 2m | Number of electrical cores | 4 | 4 | 4 | 4 | Outer diameter of inner conductor | 0.5mm | 0.5mm | 0.5mm | 0.5mm | Outer diameter of core insulation | 1mm | 1mm | 1mm | 1mm | Outer diameter of cable sheath | 5mm | 5mm | 5mm | 5mm | Number of bending cycles | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | Permissible bending radius, single bend, min. | 20mm | 20mm | 20mm | 20mm | Permissible bending radius, multiple bends, min. | 40mm | 40mm | 40mm | 40mm | Bending radius for continuous bending | 100mm | 100mm | 100mm | 100mm | Color of cable sheath | Green | Green | Green | Green | Color of core insulation of data cores | white / yellow / blue / orange | white / yellow / blue / orange | white / yellow / blue / orange | white / yellow / blue / orange | Weight per length | 34kg/km | 34kg/km | 34kg/km | 34kg/km | Mechanics/material | | | | | Type of cable outlet | 180 degree cable outlet | 180 degree cable outlet | 180 degree cable outlet | 180 degree cable outlet | Material of housing | metal | metal | metal | metal | Material of cable sheath | PUR | PUR | PUR | PUR | Material of core insulation | PE | PE | PE | PE |
Article number | 6ES7194-2MH50-0AA0 | 6ES7194-2MN10-0AA0 | 6ES7194-2MN15-0AA0 |
|---|
| CONNECTING CABLE ET-CONNECTION, 5,0M | BUS CABLE ET-CONNECTION, 10M | BUS CABLE ET-CONNECTION, 15M |
|---|
General information | | | | Product description | Flexible cable (4-core), preassembled at both ends with 2x M8 plugs, 4-pin, shielded | Flexible cable (4-core), preassembled at both ends with 2x M8 plugs, 4-pin, shielded | Flexible cable (4-core), preassembled at both ends with 2x M8 plugs, 4-pin, shielded | Suitability for use | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | Degree and class of protection | | | | Degree of protection acc. to EN 60529 | | | | | Yes | Yes | Yes | | Yes | Yes | Yes | Ambient conditions | | | | Ambient temperature during assembly, min. | -30C | -30C | -30C | Ambient temperature during assembly, max. | 80C | 80C | 80C | Ambient temperature during storage/transportation | | | | | -40C | -40C | -40C | | 80C | 80C | 80C | Cables | | | | Cable designation | 2Y(ST)C11Y 2x2x0.5/1.0-100-GN | 2Y(ST)C11Y 2x2x0.5/1.0-100-GN | 2Y(ST)C11Y 2x2x0.5/1.0-100-GN | Design of shield | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Cable length | 5m | 10m | 15m | Number of electrical cores | 4 | 4 | 4 | Outer diameter of inner conductor | 0.5mm | 0.5mm | 0.5mm | Outer diameter of core insulation | 1mm | 1mm | 1mm | Outer diameter of cable sheath | 5mm | 5mm | 5mm | Number of bending cycles | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | | Permissible bending radius, single bend, min. | 20mm | 20mm | 20mm | Permissible bending radius, multiple bends, min. | 40mm | 40mm | 40mm | Bending radius for continuous bending | 100mm | 100mm | 100mm | Color of cable sheath | Green | Green | Green | Color of core insulation of data cores | white / yellow / blue / orange | white / yellow / blue / orange | white / yellow / blue / orange | Weight per length | 34kg/km | 34kg/km | 34kg/km | Mechanics/material | | | | Type of cable outlet | 180 degree cable outlet | 180 degree cable outlet | 180 degree cable outlet | Material of housing | metal | metal | metal | Material of cable sheath | PUR | PUR | PUR | Material of core insulation | PE | PE | PE |
Article number | 6ES7194-2LH03-0AB0 | 6ES7194-2LH10-0AB0 | 6ES7194-2LH20-0AB0 |
|---|
| CONNECTING CABLE ET-CON., ANGLED, 0,3M | CONNECTING CABLE ET-CON., ANGLED, 1,0M | CONNECTING CABLE ET-CON., ANGLED, 2,0M |
|---|
General information | | | | Product description | Flexible cable (4-core), preassembled at both ends with 2x M8 plugs, angled, 4-pin, shielded | Flexible cable (4-core), preassembled at both ends with 2x M8 plugs, angled, 4-pin, shielded | Flexible cable (4-core), preassembled at both ends with 2x M8 plugs, angled, 4-pin, shielded | Suitability for use | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | Degree and class of protection | | | | Degree of protection acc. to EN 60529 | | | | | Yes | Yes | Yes | | Yes | Yes | Yes | Ambient conditions | | | | Ambient temperature during assembly, min. | -30C | -30C | -30C | Ambient temperature during assembly, max. | 80C | 80C | 80C | Ambient temperature during storage/transportation | | | | | -40C | -40C | -40C | | 80C | 80C | 80C | Cables | | | | Cable designation | 2Y(ST)CY 1x4x0.5/1.0-100-GN | 2Y(ST)CY 1x4x0.5/1.0-100-GN | 2Y(ST)CY 1x4x0.5/1.0-100-GN | Design of shield | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Cable length | 0.3m | 1m | 2m | Number of electrical cores | 4 | 4 | 4 | Outer diameter of inner conductor | 0.5mm | 0.5mm | 0.5mm | Outer diameter of core insulation | 1mm | 1mm | 1mm | Outer diameter of cable sheath | 5mm | 5mm | 5mm | Number of bending cycles | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | Permissible bending radius, single bend, min. | 20mm | 20mm | 20mm | Permissible bending radius, multiple bends, min. | 40mm | 40mm | 40mm | Bending radius for continuous bending | 100mm | 100mm | 100mm | Color of cable sheath | Green | Green | Green | Color of core insulation of data cores | white / yellow / blue / orange | white / yellow / blue / orange | white / yellow / blue / orange | Weight per length | 34kg/km | 34kg/km | 34kg/km | Mechanics/material | | | | Type of cable outlet | 90 degree cable outlet | 90 degree cable outlet | 90 degree cable outlet | Material of housing | metal | metal | metal | Material of cable sheath | PVC | PVC | PVC | Material of core insulation | PE | PE | PE |
Article number | 6ES7194-2LH50-0AB0 | 6ES7194-2LN10-0AB0 | 6ES7194-2LN15-0AB0 |
|---|
| CONNECTING CABLE ET-CON., ANGLED, 5,0M | BUS CABLE ET-CONNECTION, ANGLED, 10M | BUS CABLE ET-CONNECTION, ANGLED, 15M |
|---|
General information | | | | Product description | Flexible cable (4-core), preassembled at both ends with 2x M8 plugs, angled, 4-pin, shielded | Flexible cable (4-core), preassembled at both ends with 2x M8 plugs, angled, 4-pin, shielded | Flexible cable (4-core), preassembled at both ends with 2x M8 plugs, angled, 4-pin, shielded | Suitability for use | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | Degree and class of protection | | | | Degree of protection acc. to EN 60529 | | | | | Yes | Yes | Yes | | Yes | Yes | Yes | Ambient conditions | | | | Ambient temperature during assembly, min. | -30C | -30C | -30C | Ambient temperature during assembly, max. | 80C | 80C | 80C | Ambient temperature during storage/transportation | | | | | -40C | -40C | -40C | | 80C | 80C | 80C | Cables | | | | Cable designation | 2Y(ST)CY 1x4x0.5/1.0-100-GN | 2Y(ST)CY 1x4x0.5/1.0-100-GN | 2Y(ST)CY 1x4x0.5/1.0-100-GN | Design of shield | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Cable length | 5m | 10m | 15m | Number of electrical cores | 4 | 4 | 4 | Outer diameter of inner conductor | 0.5mm | 0.5mm | 0.5mm | Outer diameter of core insulation | 1mm | 1mm | 1mm | Outer diameter of cable sheath | 5mm | 5mm | 5mm | Number of bending cycles | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | | Permissible bending radius, single bend, min. | 20mm | 20mm | 20mm | Permissible bending radius, multiple bends, min. | 40mm | 40mm | 40mm | Bending radius for continuous bending | 100mm | 100mm | 100mm | Color of cable sheath | Green | Green | Green | Color of core insulation of data cores | white / yellow / blue / orange | white / yellow / blue / orange | white / yellow / blue / orange | Weight per length | 34kg/km | 34kg/km | 34kg/km | Mechanics/material | | | | Type of cable outlet | 90 degree cable outlet | 90 degree cable outlet | 90 degree cable outlet | Material of housing | metal | metal | metal | Material of cable sheath | PVC | PVC | PVC | Material of core insulation | PE | PE | PE |
Article number | 6ES7194-2MH03-0AB0 | 6ES7194-2MH10-0AB0 | 6ES7194-2MH20-0AB0 |
|---|
| CONNECTING CABLE ET-CON., ANGLED, 0,3M | CONNECTING CABLE ET-CON., ANGLED, 1,0M | CONNECTING CABLE ET-CON., ANGLED, 2,0M |
|---|
General information | | | | Product description | Flexible cable (4-core), preassembled at both ends with 2x M8 plugs, angled, 4-pin, shielded | Flexible cable (4-core), preassembled at both ends with 2x M8 plugs, angled, 4-pin, shielded | Flexible cable (4-core), preassembled at both ends with 2x M8 plugs, angled, 4-pin, shielded | Suitability for use | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | Degree and class of protection | | | | Degree of protection acc. to EN 60529 | | | | | Yes | Yes | Yes | | Yes | Yes | Yes | Ambient conditions | | | | Ambient temperature during assembly, min. | -30C | -30C | -30C | Ambient temperature during assembly, max. | 80C | 80C | 80C | Ambient temperature during storage/transportation | | | | | -40C | -40C | -40C | | 80C | 80C | 80C | Cables | | | | Cable designation | 2Y(ST)C11Y 2x2x0.5/1.0-100-GN | 2Y(ST)C11Y 2x2x0.5/1.0-100-GN | 2Y(ST)C11Y 2x2x0.5/1.0-100-GN | Design of shield | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Cable length | 0.3m | 1m | 2m | Number of electrical cores | 4 | 4 | 4 | Outer diameter of inner conductor | 0.5mm | 0.5mm | 0.5mm | Outer diameter of core insulation | 1mm | 1mm | 1mm | Outer diameter of cable sheath | 5mm | 5mm | 5mm | Number of bending cycles | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | Permissible bending radius, single bend, min. | 20mm | 20mm | 20mm | Permissible bending radius, multiple bends, min. | 40mm | 40mm | 40mm | Bending radius for continuous bending | 100mm | 100mm | 100mm | Color of cable sheath | Green | Green | Green | Color of core insulation of data cores | white / yellow / blue / orange | white / yellow / blue / orange | white / yellow / blue / orange | Weight per length | 34kg/km | 34kg/km | 34kg/km | Mechanics/material | | | | Type of cable outlet | 90 degree cable outlet | 90 degree cable outlet | 90 degree cable outlet | Material of housing | metal | metal | metal | Material of cable sheath | PUR | PUR | PUR | Material of core insulation | PE | PE | PE |
Article number | 6ES7194-2MH50-0AB0 | 6ES7194-2MN10-0AB0 | 6ES7194-2MN15-0AB0 |
|---|
| CONNECTING CABLE ET-CON., ANGLED, 5,0M | BUS CABLE ET-CONNECTION, ANGLED, 10M | BUS CABLE ET-CONNECTION, ANGLED, 15M |
|---|
General information | | | | Product description | Flexible cable (4-core), preassembled at both ends with 2x M8 plugs, angled, 4-pin, shielded | Flexible cable (4-core), preassembled at both ends with 2x M8 plugs, angled, 4-pin, shielded | Flexible cable (4-core), preassembled at both ends with 2x M8 plugs, angled, 4-pin, shielded | Suitability for use | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | Degree and class of protection | | | | Degree of protection acc. to EN 60529 | | | | | Yes | Yes | Yes | | Yes | Yes | Yes | Ambient conditions | | | | Ambient temperature during assembly, min. | -30C | -30C | -30C | Ambient temperature during assembly, max. | 80C | 80C | 80C | Ambient temperature during storage/transportation | | | | | -40C | -40C | -40C | | 80C | 80C | 80C | Cables | | | | Cable designation | 2Y(ST)C11Y 2x2x0.5/1.0-100-GN | 2Y(ST)C11Y 2x2x0.5/1.0-100-GN | 2Y(ST)C11Y 2x2x0.5/1.0-100-GN | Design of shield | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Cable length | 5m | 10m | 15m | Number of electrical cores | 4 | 4 | 4 | Outer diameter of inner conductor | 0.5mm | 0.5mm | 0.5mm | Outer diameter of core insulation | 1mm | 1mm | 1mm | Outer diameter of cable sheath | 5mm | 5mm | 5mm | Number of bending cycles | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | | Permissible bending radius, single bend, min. | 20mm | 20mm | 20mm | Permissible bending radius, multiple bends, min. | 40mm | 40mm | 40mm | Bending radius for continuous bending | 100mm | 100mm | 100mm | Color of cable sheath | Green | Green | Green | Color of core insulation of data cores | white / yellow / blue / orange | white / yellow / blue / orange | white / yellow / blue / orange | Weight per length | 34kg/km | 34kg/km | 34kg/km | Mechanics/material | | | | Type of cable outlet | 90 degree cable outlet | 90 degree cable outlet | 90 degree cable outlet | Material of housing | metal | metal | metal | Material of cable sheath | PUR | PUR | PUR | Material of core insulation | PE | PE | PE |
Article number | 6ES7194-2LH20-0AC0 | 6ES7194-2LH50-0AC0 | 6ES7194-2LN10-0AC0 | 6ES7194-2LN15-0AC0 |
|---|
| CONNECTING CABLE ET-CONNECTION, 2,0M | CONNECTING CABLE ET-CONNECTION, 5,0M | BUS CABLE ET-CONNECTION, 10M | BUS CABLE ET-CONNECTION, 15M |
|---|
General information | | | | | Product description | Flexible cable (4-core), preassembled at one end with 1x M8 plug, 4-pin, shielded | Flexible cable (4-core), preassembled at one end with 1x M8 plug, 4-pin, shielded | Flexible cable (4-core), preassembled at one end with 1x M8 plug, 4-pin, shielded | Flexible cable (4-core), preassembled at one end with 1x M8 plug, 4-pin, shielded | Suitability for use | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | Degree and class of protection | | | | | Degree of protection acc. to EN 60529 | | | | | | Yes | Yes | Yes | Yes | | Yes | Yes | Yes | Yes | Ambient conditions | | | | | Ambient temperature during assembly, min. | -30C | -30C | -30C | -30C | Ambient temperature during assembly, max. | 80C | 80C | 80C | 80C | Ambient temperature during storage/transportation | | | | | | -40C | -40C | -40C | -40C | | 80C | 80C | 80C | 80C | Cables | | | | | Cable designation | 2Y(ST)CY 1x4x0.5/1.0-100-GN | 2Y(ST)CY 1x4x0.5/1.0-100-GN | 2Y(ST)CY 1x4x0.5/1.0-100-GN | 2Y(ST)CY 1x4x0.5/1.0-100-GN | Design of shield | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Cable length | 2m | 5m | 10m | 15m | Number of electrical cores | 4 | 4 | 4 | 4 | Outer diameter of inner conductor | 0.5mm | 0.5mm | 0.5mm | 0.5mm | Outer diameter of core insulation | 1mm | 1mm | 1mm | 1mm | Outer diameter of cable sheath | 5mm | 5mm | 5mm | 5mm | Number of bending cycles | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | | Permissible bending radius, single bend, min. | 20mm | 20mm | 20mm | 20mm | Permissible bending radius, multiple bends, min. | 40mm | 40mm | 40mm | 40mm | Bending radius for continuous bending | 100mm | 100mm | 100mm | 100mm | Color of cable sheath | Green | Green | Green | Green | Color of core insulation of data cores | white / yellow / blue / orange | white / yellow / blue / orange | white / yellow / blue / orange | white / yellow / blue / orange | Weight per length | 34kg/km | 34kg/km | 34kg/km | 34kg/km | Mechanics/material | | | | | Type of cable outlet | 180 degree cable outlet | 180 degree cable outlet | 180 degree cable outlet | 180 degree cable outlet | Material of housing | metal | metal | metal | metal | Material of cable sheath | PVC | PVC | PVC | PVC | Material of core insulation | PE | PE | PE | PE |
Article number | 6ES7194-2MH20-0AC0 | 6ES7194-2MH50-0AC0 | 6ES7194-2MN10-0AC0 | 6ES7194-2MN15-0AC0 |
|---|
| CONNECTING CABLE ET-CONNECTION, 2,0M | CONNECTING CABLE ET-CONNECTION, 5,0M | BUS CABLE ET-CONNECTION, 10M | BUS CABLE ET-CONNECTION, 15M |
|---|
General information | | | | | Product description | Flexible cable (4-core), preassembled at one end with 1x M8 plug, 4-pin, shielded | Flexible cable (4-core), preassembled at one end with 1x M8 plug, 4-pin, shielded | Flexible cable (4-core), preassembled at one end with 1x M8 plug, 4-pin, shielded | Flexible cable (4-core), preassembled at one end with 1x M8 plug, 4-pin, shielded | Suitability for use | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | Degree and class of protection | | | | | Degree of protection acc. to EN 60529 | | | | | | Yes | Yes | Yes | Yes | | Yes | Yes | Yes | Yes | Ambient conditions | | | | | Ambient temperature during assembly, min. | -30C | -30C | -30C | -30C | Ambient temperature during assembly, max. | 80C | 80C | 80C | 80C | Ambient temperature during storage/transportation | | | | | | -40C | -40C | -40C | -40C | | 80C | 80C | 80C | 80C | Cables | | | | | Cable designation | 2Y(ST)C11Y 2x2x0.5/1.0-100-GN | 2Y(ST)C11Y 2x2x0.5/1.0-100-GN | 2Y(ST)C11Y 2x2x0.5/1.0-100-GN | 2Y(ST)C11Y 2x2x0.5/1.0-100-GN | Design of shield | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Overlapped aluminum-clad foil, sheathed in a braid of tin-plated copper wires | Cable length | 2m | 5m | 10m | 15m | Number of electrical cores | 4 | 4 | 4 | 4 | Outer diameter of inner conductor | 0.5mm | 0.5mm | 0.5mm | 0.5mm | Outer diameter of core insulation | 1mm | 1mm | 1mm | 1mm | Outer diameter of cable sheath | 5mm | 5mm | 5mm | 5mm | Number of bending cycles | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | 1000000; Cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s | | Permissible bending radius, single bend, min. | 20mm | 20mm | 20mm | 20mm | Permissible bending radius, multiple bends, min. | 40mm | 40mm | 40mm | 40mm | Bending radius for continuous bending | 100mm | 100mm | 100mm | 100mm | Color of cable sheath | Green | Green | Green | Green | Color of core insulation of data cores | white / yellow / blue / orange | white / yellow / blue / orange | white / yellow / blue / orange | white / yellow / blue / orange | Weight per length | 34kg/km | 34kg/km | 34kg/km | 34kg/km | Mechanics/material | | | | | Type of cable outlet | 180 degree cable outlet | 180 degree cable outlet | 180 degree cable outlet | 180 degree cable outlet | Material of housing | metal | metal | metal | metal | Material of cable sheath | PUR | PUR | PUR | PUR | Material of core insulation | PE | PE | PE | PE |
Article number | 6ES7194-2LH02-1AA0 | 6ES7194-2LH03-1AA0 | 6ES7194-2LH10-1AA0 | 6ES7194-2LH20-1AA0 |
|---|
| POWER CABLE M8, 0,19M | POWER CABLE M8, 0,3M | POWER CABLE M8, 1,0M | POWER CABLE M8, 2,0M |
|---|
General information | | | | | Product description | Flexible cable (4-core), preassembled at each end with a 4-pin M8 male / female connector | Flexible cable (4-core), preassembled at each end with a 4-pin M8 male / female connector | Flexible cable (4-core), preassembled at each end with a 4-pin M8 male / female connector | Flexible cable (4-core), preassembled at each end with a 4-pin M8 male / female connector | Suitability for use | For connection to ET 200AL for 24 V DC power supply | For connection to ET 200AL for 24 V DC power supply | For connection to ET 200AL for 24 V DC power supply | For connection to ET 200AL for 24 V DC power supply | Degree and class of protection | | | | | Degree of protection acc. to EN 60529 | | | | | | Yes | Yes | Yes | Yes | | Yes | Yes | Yes | Yes | Ambient conditions | | | | | Ambient temperature during assembly, min. | -30C | -30C | -30C | -30C | Ambient temperature during assembly, max. | 80C | 80C | 80C | 80C | Ambient temperature during storage/transportation | | | | | | -40C | -40C | -40C | -40C | | 80C | 80C | 80C | 80C | Cables | | | | | Cable designation | 4 Li9Y 0.50 mm Y | 4 Li9Y 0.50 mm Y | 4 Li9Y 0.50 mm Y | 4 Li9Y 0.50 mm Y | Cable length | 0.19m | 0.3m | 1m | 2m | Number of electrical cores | 4 | 4 | 4 | 4 | Outer diameter of inner conductor | 0.8mm | 0.8mm | 0.8mm | 0.8mm | Outer diameter of core insulation | 1.46mm | 1.46mm | 1.46mm | 1.46mm | Outer diameter of cable sheath | 5.2mm | 5.2mm | 5.2mm | 5.2mm | Number of bending cycles | 2500000; Cable carrier compliant for 2.5 million bending cycles with a bending radius of 52 mm, a speed of 3 m/s and an acceleration of 10 m/s | 2500000; Cable carrier compliant for 2.5 million bending cycles with a bending radius of 52 mm, a speed of 3 m/s and an acceleration of 10 m/s | 2500000; Cable carrier compliant for 2.5 million bending cycles with a bending radius of 52 mm, a speed of 3 m/s and an acceleration of 10 m/s | 2500000; Cable carrier compliant for 2.5 million bending cycles with a bending radius of 52 mm, a speed of 3 m/s and an acceleration of 10 m/s | Permissible bending radius, single bend, min. | 26mm | 26mm | 26mm | 26mm | Permissible bending radius, multiple bends, min. | 52mm | 52mm | 52mm | 52mm | Bending radius for continuous bending | 52mm | 52mm | 52mm | 52mm | Color of cable sheath | gray | gray | gray | gray | Color of core insulation of energy core | white / brown / blue / black | white / brown / blue / black | white / brown / blue / black | white / brown / blue / black | Weight per length | 44kg/km | 44kg/km | 44kg/km | 44kg/km | Mechanics/material | | | | | Type of cable outlet | 180 degree cable outlet | 180 degree cable outlet | 180 degree cable outlet | 180 degree cable outlet | Material of housing | plastic | plastic | plastic | plastic | Material of cable sheath | PVC | PVC | PVC | PVC | Material of core insulation | PP | PP | PP | PP |
Article number | 6ES7194-2LH50-1AA0 | 6ES7194-2LN10-1AA0 | 6ES7194-2LN15-1AA0 |
|---|
| POWER CABLE M8, 5,0M | POWER CABLE M8, 10M | POWER CABLE M8, 15M |
|---|
General information | | | | Product description | Flexible cable (4-core), preassembled at each end with a 4-pin M8 male / female connector | Flexible cable (4-core), preassembled at each end with a 4-pin M8 male / female connector | Flexible cable (4-core), preassembled at each end with a 4-pin M8 male / female connector | Suitability for use | For connection to ET 200AL for 24 V DC power supply | For connection to ET 200AL for 24 V DC power supply | For connection to ET 200AL for 24 V DC power supply | Degree and class of protection | | | | Degree of protection acc. to EN 60529 | | | | | Yes | Yes | Yes | | Yes | Yes | Yes | Ambient conditions | | | | Ambient temperature during assembly, min. | -30C | -30C | -30C | Ambient temperature during assembly, max. | 80C | 80C | 80C | Ambient temperature during storage/transportation | | | | | -40C | -40C | -40C | | 80C | 80C | 80C | Cables | | | | Cable designation | 4 Li9Y 0.50 mm Y | 4 Li9Y 0.50 mm Y | 4 Li9Y 0.50 mm Y | Cable length | 5m | 10m | 15m | Number of electrical cores | 4 | 4 | 4 | Outer diameter of inner conductor | 0.8mm | 0.8mm | 0.8mm | Outer diameter of core insulation | 1.46mm | 1.46mm | 1.46mm | Outer diameter of cable sheath | 5.2mm | 5.2mm | 5.2mm | Number of bending cycles | 2500000; Cable carrier compliant for 2.5 million bending cycles with a bending radius of 52 mm, a speed of 3 m/s and an acceleration of 10 m/s | 2500000; Cable carrier compliant for 2.5 million bending cycles with a bending radius of 52 mm, a speed of 3 m/s and an acceleration of 10 m/s | 2500000; Cable carrier compliant for 2.5 million bending cycles with a bending radius of 52 mm, a speed of 3 m/s and an acceleration of 10 m/s | Permissible bending radius, single bend, min. | 26mm | 26mm | 26mm | Permissible bending radius, multiple bends, min. | 52mm | 52mm | 52mm | Bending radius for continuous bending | 52mm | 52mm | 52mm | Color of cable sheath | gray | gray | gray | Color of core insulation of energy core | white / brown / blue / black | white / brown / blue / black | white / brown / blue / black | Weight per length | 44kg/km | 44kg/km | 44kg/km | Mechanics/material | | | | Type of cable outlet | 180 degree cable outlet | 180 degree cable outlet | 180 degree cable outlet | Material of housing | plastic | plastic | plastic | Material of cable sheath | PVC | PVC | PVC | Material of core insulation | PP | PP | PP |
Article number | 6ES7194-2MH50-1AA0 | 6ES7194-2MN10-1AA0 | 6ES7194-2MN15-1AA0 |
|---|
| POWER CABLE M8, 5,0M | POWER CABLE M8, 10M | POWER CABLE M8, 15M |
|---|
General information | | | | Product description | Flexible cable (4-core), preassembled at each end with a 4-pin M8 male / female connector | Flexible cable (4-core), preassembled at each end with a 4-pin M8 male / female connector | Flexible cable (4-core), preassembled at each end with a 4-pin M8 male / female connector | Suitability for use | For connection to ET 200AL for 24 V DC power supply | For connection to ET 200AL for 24 V DC power supply | For connection to ET 200AL for 24 V DC power supply | Degree and class of protection | | | | Degree of protection acc. to EN 60529 | | | | | Yes | Yes | Yes | | Yes | Yes | Yes | Ambient conditions | | | | Ambient temperature during assembly, min. | -25C | -25C | -25C | Ambient temperature during assembly, max. | 80C | 80C | 80C | Ambient temperature during storage/transportation | | | | | -25C | -25C | -25C | | 80C | 80C | 80C | Cables | | | | Cable designation | LIF9Y11YFHF 4x0.50 mm | LIF9Y11YFHF 4x0.50 mm | LIF9Y11YFHF 4x0.50 mm | Cable length | 5m | 10m | 15m | Number of electrical cores | 4 | 4 | 4 | Outer diameter of inner conductor | 1mm | 1mm | 1mm | Outer diameter of core insulation | 1.46mm | 1.46mm | 1.46mm | Outer diameter of cable sheath | 5.1mm | 5.1mm | 5.1mm | Number of bending cycles | 2000000; Cable carrier compliant for 2 million bending cycles with a bending radius of 51 mm, a speed of 5 m/s and an acceleration of 5 m/s | 2000000; Cable carrier compliant for 2 million bending cycles with a bending radius of 51 mm, a speed of 5 m/s and an acceleration of 5 m/s | 2000000; Cable carrier compliant for 2 million bending cycles with a bending radius of 51 mm, a speed of 5 m/s and an acceleration of 5 m/s | Permissible bending radius, single bend, min. | 26mm | 26mm | 26mm | Permissible bending radius, multiple bends, min. | 51mm | 51mm | 51mm | Bending radius for continuous bending | 51mm | 51mm | 51mm | Color of cable sheath | gray | gray | gray | Color of core insulation of energy core | white / brown / blue / black | white / brown / blue / black | white / brown / blue / black | Weight per length | 44kg/km | 44kg/km | 44kg/km | Mechanics/material | | | | Type of cable outlet | 180 degree cable outlet | 180 degree cable outlet | 180 degree cable outlet | Material of housing | plastic | plastic | plastic | Material of cable sheath | PE-PUR | PE-PUR | PE-PUR | Material of core insulation | PP | PP | PP |
Article number | 6ES7194-2LH03-1AB0 | 6ES7194-2LH10-1AB0 | 6ES7194-2LH20-1AB0 |
|---|
| POWER CABLE M8, ANGLED, 0,3M | POWER CABLE M8, ANGLED, 1,0M | POWER CABLE M8, ANGLED, 2,0M |
|---|
General information | | | | Product description | Flexible cable (4-core), preassembled at each end with a 4-pin M8 male / female connector, angled | Flexible cable (4-core), preassembled at each end with a 4-pin M8 male / female connector, angled | Flexible cable (4-core), preassembled at each end with a 4-pin M8 male / female connector, angled | Suitability for use | For connection to ET 200AL for 24 V DC power supply | For connection to ET 200AL for 24 V DC power supply | For connection to ET 200AL for 24 V DC power supply | Degree and class of protection | | | | Degree of protection acc. to EN 60529 | | | | | Yes | Yes | Yes | | Yes | Yes | Yes | Ambient conditions | | | | Ambient temperature during assembly, min. | -30C | -30C | -30C | Ambient temperature during assembly, max. | 80C | 80C | 80C | Ambient temperature during storage/transportation | | | | | -40C | -40C | -40C | | 80C | 80C | 80C | Cables | | | | Cable designation | 4 Li9Y 0.50 mm Y | 4 Li9Y 0.50 mm Y | 4 Li9Y 0.50 mm Y | Cable length | 0.3m | 1m | 2m | Number of electrical cores | 4 | 4 | 4 | Outer diameter of inner conductor | 0.8mm | 0.8mm | 0.8mm | Outer diameter of core insulation | 1.46mm | 1.46mm | 1.46mm | Outer diameter of cable sheath | 5.2mm | 5.2mm | 5.2mm | Number of bending cycles | 2500000; Cable carrier compliant for 2.5 million bending cycles with a bending radius of 52 mm, a speed of 3 m/s and an acceleration of 10 m/s | 2500000; Cable carrier compliant for 2.5 million bending cycles with a bending radius of 52 mm, a speed of 3 m/s and an acceleration of 10 m/s | 2500000; Cable carrier compliant for 2.5 million bending cycles with a bending radius of 52 mm, a speed of 3 m/s and an acceleration of 10 m/s | Permissible bending radius, single bend, min. | 26mm | 26mm | 26mm | Permissible bending radius, multiple bends, min. | 52mm | 52mm | 52mm | Bending radius for continuous bending | 52mm | 52mm | 52mm | Color of cable sheath | gray | gray | gray | Color of core insulation of energy core | white / brown / blue / black | white / brown / blue / black | white / brown / blue / black | Weight per length | 44kg/km | 44kg/km | 44kg/km | Mechanics/material | | | | Type of cable outlet | 90 degree cable outlet | 90 degree cable outlet | 90 degree cable outlet | Material of housing | plastic | plastic | plastic | Material of cable sheath | PVC | PVC | PVC | Material of core insulation | PP | PP | PP |
Article number | 6ES7194-2LH50-1AB0 | 6ES7194-2LN10-1AB0 | 6ES7194-2LN15-1AB0 |
|---|
| POWER CABLE M8, ANGLED, 5,0M | POWER CABLE M8, ANGLED, 10M | POWER CABLE M8, ANGLED, 15M |
|---|
General information | | | | Product description | Flexible cable (4-core), preassembled at each end with a 4-pin M8 male / female connector, angled | Flexible cable (4-core), preassembled at each end with a 4-pin M8 male / female connector, angled | Flexible cable (4-core), preassembled at each end with a 4-pin M8 male / female connector, angled | Suitability for use | For connection to ET 200AL for 24 V DC power supply | For connection to ET 200AL for 24 V DC power supply | For connection to ET 200AL for 24 V DC power supply | Degree and class of protection | | | | Degree of protection acc. to EN 60529 | | | | | Yes | Yes | Yes | | Yes | Yes | Yes | Ambient conditions | | | | Ambient temperature during assembly, min. | -30C | -30C | -30C | Ambient temperature during assembly, max. | 80C | 80C | 80C | Ambient temperature during storage/transportation | | | | | -40C | -40C | -40C | | 80C | 80C | 80C | Cables | | | | Cable designation | 4 Li9Y 0.50 mm Y | 4 Li9Y 0.50 mm Y | 4 Li9Y 0.50 mm Y | Cable length | 5m | 10m | 15m | Number of electrical cores | 4 | 4 | 4 | Outer diameter of inner conductor | 0.8mm | 0.8mm | 0.8mm | Outer diameter of core insulation | 1.46mm | 1.46mm | 1.46mm | Outer diameter of cable sheath | 5.2mm | 5.2mm | 5.2mm | Number of bending cycles | 2500000; Cable carrier compliant for 2.5 million bending cycles with a bending radius of 52 mm, a speed of 3 m/s and an acceleration of 10 m/s | 2500000; Cable carrier compliant for 2.5 million bending cycles with a bending radius of 52 mm, a speed of 3 m/s and an acceleration of 10 m/s | 2500000; Cable carrier compliant for 2.5 million bending cycles with a bending radius of 52 mm, a speed of 3 m/s and an acceleration of 10 m/s | Permissible bending radius, single bend, min. | 26mm | 26mm | 26mm | Permissible bending radius, multiple bends, min. | 52mm | 52mm | 52mm | Bending radius for continuous bending | 52mm | 52mm | 52mm | Color of cable sheath | gray | gray | gray | Color of core insulation of energy core | white / brown / blue / black | white / brown / blue / black | white / brown / blue / black | Weight per length | 44kg/km | 44kg/km | 44kg/km | Mechanics/material | | | | Type of cable outlet | 90 degree cable outlet | 90 degree cable outlet | 90 degree cable outlet | Material of housing | plastic | plastic | plastic | Material of cable sheath | PVC | PVC | PVC | Material of core insulation | PP | PP | PP |
Article number | 6ES7194-2MH50-1AB0 | 6ES7194-2MN10-1AB0 | 6ES7194-2MN15-1AB0 |
|---|
| POWER CABLE M8, ANGLED, 5,0M | POWER CABLE M8, ANGLED, 10M | POWER CABLE M8, ANGLED, 15M |
|---|
General information | | | | Product description | Flexible cable (4-core), preassembled at each end with a 4-pin M8 male / female connector, angled | Flexible cable (4-core), preassembled at each end with a 4-pin M8 male / female connector, angled | Flexible cable (4-core), preassembled at each end with a 4-pin M8 male / female connector, angled | Suitability for use | For connection to ET 200AL for 24 V DC power supply | For connection to ET 200AL for 24 V DC power supply | For connection to ET 200AL for 24 V DC power supply | Degree and class of protection | | | | Degree of protection acc. to EN 60529 | | | | | Yes | Yes | Yes | | Yes | Yes | Yes | Ambient conditions | | | | Ambient temperature during assembly, min. | -25C | -25C | -25C | Ambient temperature during assembly, max. | 80C | 80C | 80C | Ambient temperature during storage/transportation | | | | | -25C | -25C | -25C | | 80C | 80C | 80C | Cables | | | | Cable designation | LIF9Y11YFHF 4x0.50 mm | LIF9Y11YFHF 4x0.50 mm | LIF9Y11YFHF 4x0.50 mm | Cable length | 5m | 10m | 15m | Number of electrical cores | 4 | 4 | 4 | Outer diameter of inner conductor | 1mm | 1mm | 1mm | Outer diameter of core insulation | 1.46mm | 1.46mm | 1.46mm | Outer diameter of cable sheath | 5.1mm | 5.1mm | 5.1mm | Number of bending cycles | 2000000; Cable carrier compliant for 2 million bending cycles with a bending radius of 51 mm, a speed of 5 m/s and an acceleration of 5 m/s | 2000000; Cable carrier compliant for 2 million bending cycles with a bending radius of 51 mm, a speed of 5 m/s and an acceleration of 5 m/s | 2000000; Cable carrier compliant for 2 million bending cycles with a bending radius of 51 mm, a speed of 5 m/s and an acceleration of 5 m/s | Permissible bending radius, single bend, min. | 26mm | 26mm | 26mm | Permissible bending radius, multiple bends, min. | 51mm | 51mm | 51mm | Bending radius for continuous bending | 51mm | 51mm | 51mm | Color of cable sheath | gray | gray | gray | Color of core insulation of energy core | white / brown / blue / black | white / brown / blue / black | white / brown / blue / black | Weight per length | 44kg/km | 44kg/km | 44kg/km | Mechanics/material | | | | Type of cable outlet | 90 degree cable outlet | 90 degree cable outlet | 90 degree cable outlet | Material of housing | plastic | plastic | plastic | Material of cable sheath | PE-PUR | PE-PUR | PE-PUR | Material of core insulation | PP | PP | PP |
Article number | 6ES7194-2MH03-1AB0 | 6ES7194-2MH10-1AB0 | 6ES7194-2MH20-1AB0 |
|---|
| POWER CABLE M8, ANGLED, 0,3M | POWER CABLE M8, ANGLED, 1,0M | POWER CABLE M8, ANGLED, 2,0M |
|---|
General information | | | | Product description | Flexible cable (4-core), preassembled at each end with a 4-pin M8 male / female connector, angled | Flexible cable (4-core), preassembled at each end with a 4-pin M8 male / female connector, angled | Flexible cable (4-core), preassembled at each end with a 4-pin M8 male / female connector, angled | Suitability for use | For connection to ET 200AL for 24 V DC power supply | For connection to ET 200AL for 24 V DC power supply | For connection to ET 200AL for 24 V DC power supply | Degree and class of protection | | | | Degree of protection acc. to EN 60529 | | | | | Yes | Yes | Yes | | Yes | Yes | Yes | Ambient conditions | | | | Ambient temperature during assembly, min. | -25C | -25C | -25C | Ambient temperature during assembly, max. | 80C | 80C | 80C | Ambient temperature during storage/transportation | | | | | -25C | -25C | -25C | | 80C | 80C | 80C | Cables | | | | Cable designation | LIF9Y11YFHF 4x0.50 mm | LIF9Y11YFHF 4x0.50 mm | LIF9Y11YFHF 4x0.50 mm | Cable length | 0.3m | 1m | 2m | Number of electrical cores | 4 | 4 | 4 | Outer diameter of inner conductor | 1mm | 1mm | 1mm | Outer diameter of core insulation | 1.46mm | 1.46mm | 1.46mm | Outer diameter of cable sheath | 5.1mm | 5.1mm | 5.1mm | Number of bending cycles | 2000000; Cable carrier compliant for 2 million bending cycles with a bending radius of 51 mm, a speed of 5 m/s and an acceleration of 5 m/s | 2000000; Cable carrier compliant for 2 million bending cycles with a bending radius of 51 mm, a speed of 5 m/s and an acceleration of 5 m/s | 2000000; Cable carrier compliant for 2 million bending cycles with a bending radius of 51 mm, a speed of 5 m/s and an acceleration of 5 m/s | Permissible bending radius, single bend, min. | 26mm | 26mm | 26mm | Permissible bending radius, multiple bends, min. | 51mm | 51mm | 51mm | Bending radius for continuous bending | 51mm | 51mm | 51mm | Color of cable sheath | gray | gray | gray | Color of core insulation of energy core | white / brown / blue / black | white / brown / blue / black | white / brown / blue / black | Weight per length | 44kg/km | 44kg/km | 44kg/km | Mechanics/material | | | | Type of cable outlet | 90 degree cable outlet | 90 degree cable outlet | 90 degree cable outlet | Material of housing | plastic | plastic | plastic | Material of cable sheath | PE-PUR | PE-PUR | PE-PUR | Material of core insulation | PP | PP | PP |
Article number | 6ES7194-2LH20-1AC0 | 6ES7194-2LH50-1AC0 | 6ES7194-2LN10-1AC0 | 6ES7194-2LN15-1AC0 |
|---|
| POWER CABLE M8, 2,0M | POWER CABLE M8, 5,0M | POWER CABLE M8, 10M | POWER CABLE M8, 15M |
|---|
General information | | | | | Product description | Flexible cable (4-core), preassembled at one end with 1x M8 female connector | Flexible cable (4-core), preassembled at one end with 1x M8 female connector | Flexible cable (4-core), preassembled at one end with 1x M8 plug, 4-pin, shielded | Flexible cable (4-core), preassembled at one end with 1x M8 plug, 4-pin, shielded | Suitability for use | For connection to ET 200AL for 24 V DC power supply | For connection to ET 200AL for 24 V DC power supply | For connection to ET 200AL for 24 V DC power supply | For connection to ET 200AL for 24 V DC power supply | Degree and class of protection | | | | | Degree of protection acc. to EN 60529 | | | | | | Yes | Yes | Yes | Yes | | Yes | Yes | Yes | Yes | Ambient conditions | | | | | Ambient temperature during assembly, min. | -30C | -30C | -30C | -30C | Ambient temperature during assembly, max. | 80C | 80C | 80C | 80C | Ambient temperature during storage/transportation | | | | | | -40C | -40C | -40C | -40C | | 80C | 80C | 80C | 80C | Cables | | | | | Cable designation | 4 Li9Y 0.50 mm Y | 4 Li9Y 0.50 mm Y | 4 Li9Y 0.50 mm Y | 4 Li9Y 0.50 mm Y | Cable length | 2m | 5m | 10m | 15m | Number of electrical cores | 4 | 4 | 4 | 4 | Outer diameter of inner conductor | 0.8mm | 0.8mm | 0.8mm | 0.8mm | Outer diameter of core insulation | 1.46mm | 1.46mm | 1.46mm | 1.46mm | Outer diameter of cable sheath | 5.2mm | 5.2mm | 5.2mm | 5.2mm | Number of bending cycles | 2500000; Cable carrier compliant for 2.5 million bending cycles with a bending radius of 52 mm, a speed of 3 m/s and an acceleration of 10 m/s | 2500000; Cable carrier compliant for 2.5 million bending cycles with a bending radius of 52 mm, a speed of 3 m/s and an acceleration of 10 m/s | 2500000; Cable carrier compliant for 2.5 million bending cycles with a bending radius of 52 mm, a speed of 3 m/s and an acceleration of 10 m/s | 2500000; Cable carrier compliant for 2.5 million bending cycles with a bending radius of 52 mm, a speed of 3 m/s and an acceleration of 10 m/s | Permissible bending radius, single bend, min. | 26mm | 26mm | 26mm | 26mm | Permissible bending radius, multiple bends, min. | 52mm | 52mm | 52mm | 52mm | Bending radius for continuous bending | 52mm | 52mm | 52mm | 52mm | Color of cable sheath | gray | gray | gray | gray | Color of core insulation of energy core | white / brown / blue / black | white / brown / blue / black | white / brown / blue / black | white / brown / blue / black | Weight per length | 44kg/km | 44kg/km | 44kg/km | 44kg/km | Mechanics/material | | | | | Type of cable outlet | 180 degree cable outlet | 180 degree cable outlet | 180 degree cable outlet | 180 degree cable outlet | Material of housing | plastic | plastic | plastic | plastic | Material of cable sheath | PVC | PVC | PVC | PVC | Material of core insulation | PP | PP | PP | PP |
Article number | 6ES7194-2MH20-1AC0 | 6ES7194-2MH50-1AC0 | 6ES7194-2MN10-1AC0 | 6ES7194-2MN15-1AC0 |
|---|
| POWER CABLE M8, 2,0M | POWER CABLE M8, 5,0M | POWER CABLE M8, 10M | POWER CABLE M8, 15M |
|---|
General information | | | | | Product description | Flexible cable (4-core), preassembled at one end with 1x M8 female connector | Flexible cable (4-core), preassembled at one end with 1x M8 female connector | Flexible cable (4-core), preassembled at one end with 1x M8 female connector | Flexible cable (4-core), preassembled at one end with 1x M8 female connector | Suitability for use | For connection to ET 200AL for 24 V DC power supply | For connection to ET 200AL for 24 V DC power supply | For connection to ET 200AL for 24 V DC power supply | For connection to ET 200AL for 24 V DC power supply | Degree and class of protection | | | | | Degree of protection acc. to EN 60529 | | | | | | Yes | Yes | Yes | Yes | | Yes | Yes | Yes | Yes | Ambient conditions | | | | | Ambient temperature during assembly, min. | -25C | -25C | -25C | -25C | Ambient temperature during assembly, max. | 80C | 80C | 80C | 80C | Ambient temperature during storage/transportation | | | | | | -25C | -25C | -25C | -25C | | 80C | 80C | 80C | 80C | Cables | | | | | Cable designation | LIF9Y11YFHF 4x0.50 mm | LIF9Y11YFHF 4x0.50 mm | LIF9Y11YFHF 4x0.50 mm | LIF9Y11YFHF 4x0.50 mm | Cable length | 2m | 5m | 10m | 15m | Number of electrical cores | 4 | 4 | 4 | 4 | Outer diameter of inner conductor | 1mm | 1mm | 1mm | 1mm | Outer diameter of core insulation | 1.46mm | 1.46mm | 1.46mm | 1.46mm | Outer diameter of cable sheath | 5.1mm | 5.1mm | 5.1mm | 5.1mm | Number of bending cycles | 2000000; Cable carrier compliant for 2 million bending cycles with a bending radius of 51 mm, a speed of 5 m/s and an acceleration of 5 m/s | 2000000; Cable carrier compliant for 2 million bending cycles with a bending radius of 51 mm, a speed of 5 m/s and an acceleration of 5 m/s | 2000000; Cable carrier compliant for 2 million bending cycles with a bending radius of 51 mm, a speed of 5 m/s and an acceleration of 5 m/s | 2000000; Cable carrier compliant for 2 million bending cycles with a bending radius of 51 mm, a speed of 5 m/s and an acceleration of 5 m/s | Permissible bending radius, single bend, min. | 26mm | 26mm | 26mm | 26mm | Permissible bending radius, multiple bends, min. | 51mm | 51mm | 51mm | 51mm | Bending radius for continuous bending | 51mm | 51mm | 51mm | 51mm | Color of cable sheath | gray | gray | gray | gray | Color of core insulation of energy core | white / brown / blue / black | white / brown / blue / black | white / brown / blue / black | white / brown / blue / black | Weight per length | 44kg/km | 44kg/km | 44kg/km | 44kg/km | Mechanics/material | | | | | Type of cable outlet | 180 degree cable outlet | 180 degree cable outlet | 180 degree cable outlet | 180 degree cable outlet | Material of housing | plastic | plastic | plastic | plastic | Material of cable sheath | PE-PUR | PE-PUR | PE-PUR | PE-PUR | Material of core insulation | PP | PP | PP | PP |
Article number | 6ES7194-2AA00-0AA0 | 6ES7194-2AC00-0AA0 |
|---|
| M8 POWER CONNECTOR | M8 POWER CONNECTOR, SOCKET |
|---|
General information | | | Product type designation | Power connector | Power connector | Product description | M8 plug connector with high degree of protection, 4-pin, plastic version | M8 plug connector with high degree of protection, socket insert, 4-pin, plastic version | Suitability for use | For connection to ET 200AL for 24 V DC power supply | For connection to ET 200AL for 24 V DC power supply | Degree and class of protection | | | Degree of protection acc. to EN 60529 | | | | Yes | Yes | | Yes | Yes | Ambient conditions | | | Ambient temperature during assembly, min. | -30C | -30C | Ambient temperature during assembly, max. | 85C | 85C | Ambient temperature during storage/transportation | | | | -40C | -40C | | 85C | 85C | Mechanics/material | | | Type of cable outlet | 180 degree cable outlet | 180 degree cable outlet | Material of housing | plastic | plastic | Dimensions | | | Width | 14mm | 14mm | Depth | 47mm | 47mm |
Article number | 6ES7194-2AB00-0AA0 |
|---|
| M8 CONNECTOR ET-CONNECTION |
|---|
General information | | Product type designation | Connector | Product description | M8 plug connector with high degree of protection, 4-pin, metal version | Suitability for use | for connecting ET-CONNECTION nodes (e.g. SIMATIC ET 200AL) in degree of protection IP65 / 67 | Degree and class of protection | | Degree of protection acc. to EN 60529 | | | Yes | | Yes | Ambient conditions | | Ambient temperature during assembly, min. | -30C | Ambient temperature during assembly, max. | 80C | Ambient temperature during storage/transportation | | | -40C | | 80C | Mechanics/material | | Type of cable outlet | 180 degree cable outlet | Material of housing | metal | Dimensions | | Width | 14mm | Depth | 47mm |
|
|