SM 534 analog input/output modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SM 534 analog input/output modules

| | | | | | |

Article number		6ES7534-7QE00-0AB0
		S7-1500, AI 4X U/I/RTD/TC/AQ 2X U/I ST
General information
Product type designation		AI 4xU/I/RTD/TC /AQ 2xU/I ST
HW functional status		FS01
Firmware version		V1.0.0
в—Џ FW update possible		Yes
Product function
в—Џ I&M data		Yes; I&M0 to I&M3
в—Џ Measuring range scalable		No
в—Џ Scalable measured values		No
в—Џ Adjustment of measuring range		No
в—Џ Output range scalable		No
Engineering with
в—Џ STEP 7 TIA Portal configurable/integrated as of version		V13 / V13.0.2
в—Џ STEP 7 configurable/integrated as of version		V5.5 SP3 / -
в—Џ PROFIBUS as of GSD version/GSD revision		V1.0 / V5.1
в—Џ PROFINET as of GSD version/GSD revision		V2.3 / -
Operating mode
в—Џ Oversampling		No
в—Џ MSI		Yes
в—Џ MSO		Yes
CiR – Configuration in RUN
Reparameterization possible in RUN		Yes
Calibration possible in RUN		Yes
Supply voltage
Rated value (DC)		24 V
permissible range, lower limit (DC)		20.4 V
permissible range, upper limit (DC)		28.8 V
Reverse polarity protection		Yes
Input current
Current consumption, max.		200 mA; with 24 V DC supply
Encoder supply
24 V encoder supply
в—Џ Short-circuit protection		Yes
в—Џ Output current, max.		20 mA; Max. 47 mA per channel for a duration < 10 s
Power
Power available from the backplane bus		0.7 W
Power loss
Power loss, typ.		3.3 W
Analog inputs
Number of analog inputs		4
в—Џ For current measurement		4
в—Џ For voltage measurement		4
в—Џ For resistance/resistance thermometer measurement		2
в—Џ For thermocouple measurement		4
permissible input voltage for voltage input (destruction limit), max.		28.8 V
permissible input current for current input (destruction limit), max.		40 mA
Technical unit for temperature measurement adjustable		Yes; °C/°F/K
Analog input with oversampling		No
Standardization of measured values		No
Input ranges (rated values), voltages
в—Џ 0 to +5 V		No
в—Џ 0 to +10 V		No
в—Џ 1 V to 5 V		Yes
в—Џ Input resistance (1 V to 5 V)		100 kв„¦
в—Џ -1 V to +1 V		Yes
в—Џ Input resistance (-1 V to +1 V)		10 Mв„¦
в—Џ -10 V to +10 V		Yes
в—Џ Input resistance (-10 V to +10 V)		100 kв„¦
в—Џ -2.5 V to +2.5 V		Yes
в—Џ Input resistance (-2.5 V to +2.5 V)		10 Mв„¦
в—Џ -25 mV to +25 mV		No
в—Џ -250 mV to +250 mV		Yes
в—Џ Input resistance (-250 mV to +250 mV)		10 Mв„¦
в—Џ -5 V to +5 V		Yes
в—Џ Input resistance (-5 V to +5 V)		100 kв„¦
в—Џ -50 mV to +50 mV		Yes
в—Џ Input resistance (-50 mV to +50 mV)		10 Mв„¦
в—Џ -500 mV to +500 mV		Yes
в—Џ Input resistance (-500 mV to +500 mV)		10 Mв„¦
в—Џ -80 mV to +80 mV		Yes
в—Џ Input resistance (-80 mV to +80 mV)		10 Mв„¦
Input ranges (rated values), currents
в—Џ 0 to 20 mA		Yes
в—Џ Input resistance (0 to 20 mA)		25 в„¦; Plus approx. 42 ohms for overvoltage protection by PTC
в—Џ -20 mA to +20 mA		Yes
в—Џ Input resistance (-20 mA to +20 mA)		25 в„¦; Plus approx. 42 ohms for overvoltage protection by PTC
в—Џ 4 mA to 20 mA		Yes
в—Џ Input resistance (4 mA to 20 mA)		25 в„¦; Plus approx. 42 ohms for overvoltage protection by PTC
Input ranges (rated values), thermocouples
в—Џ Type B		Yes
в—Џ Input resistance (Type B)		10 Mв„¦
в—Џ Type C		No
в—Џ Type E		Yes
в—Џ Input resistance (Type E)		10 Mв„¦
в—Џ Type J		Yes
в—Џ Input resistance (type J)		10 Mв„¦
в—Џ Type K		Yes
в—Џ Input resistance (Type K)		10 Mв„¦
в—Џ Type L		No
в—Џ Type N		Yes
в—Џ Input resistance (Type N)		10 Mв„¦
в—Џ Type R		Yes
в—Џ Input resistance (Type R)		10 Mв„¦
в—Џ Type S		Yes
в—Џ Input resistance (Type S)		10 Mв„¦
в—Џ Type T		Yes
в—Џ Input resistance (Type T)		10 Mв„¦
в—Џ Type U		No
в—Џ Type TXK/TXK(L) to GOST		No
Input ranges (rated values), resistance thermometer
в—Џ Cu 10		No
в—Џ Cu 10 according to GOST		No
в—Џ Cu 50		No
в—Џ Cu 50 according to GOST		No
в—Џ Cu 100		No
в—Џ Cu 100 according to GOST		No
в—Џ Ni 10		No
в—Џ Ni 10 according to GOST		No
в—Џ Ni 100		Yes; Standard/climate
в—Џ Input resistance (Ni 100)		10 Mв„¦
в—Џ Ni 100 according to GOST		No
в—Џ Ni 1000		Yes; Standard/climate
в—Џ Input resistance (Ni 1000)		10 Mв„¦
в—Џ Ni 1000 according to GOST		No
в—Џ LG-Ni 1000		Yes; Standard/climate
в—Џ Input resistance (LG-Ni 1000)		10 Mв„¦
в—Џ Ni 120		No
в—Џ Ni 120 according to GOST		No
в—Џ Ni 200		No
в—Џ Ni 200 according to GOST		No
в—Џ Ni 500		No
в—Џ Ni 500 according to GOST		No
в—Џ Pt 10		No
в—Џ Pt 10 according to GOST		No
в—Џ Pt 50		No
в—Џ Pt 50 according to GOST		No
в—Џ Pt 100		Yes; Standard/climate
в—Џ Input resistance (Pt 100)		10 Mв„¦
в—Џ Pt 100 according to GOST		No
в—Џ Pt 1000		Yes; Standard/climate
в—Џ Input resistance (Pt 1000)		10 Mв„¦
в—Џ Pt 1000 according to GOST		No
в—Џ Pt 200		Yes; Standard/climate
в—Џ Input resistance (Pt 200)		10 Mв„¦
в—Џ Pt 200 according to GOST		No
в—Џ Pt 500		Yes; Standard/climate
в—Џ Input resistance (Pt 500)		10 Mв„¦
в—Џ Pt 500 according to GOST		No
Input ranges (rated values), resistors
в—Џ 0 to 150 ohms		Yes
в—Џ Input resistance (0 to 150 ohms)		10 Mв„¦
в—Џ 0 to 300 ohms		Yes
в—Џ Input resistance (0 to 300 ohms)		10 Mв„¦
в—Џ 0 to 600 ohms		Yes
в—Џ Input resistance (0 to 600 ohms)		10 Mв„¦
в—Џ 0 to 3000 ohms		No
в—Џ 0 to 6000 ohms		Yes
в—Џ Input resistance (0 to 6000 ohms)		10 Mв„¦
в—Џ PTC		Yes
в—Џ Input resistance (PTC)		10 Mв„¦
Thermocouple (TC)
Temperature compensation
вЂ” parameterizable		Yes
вЂ” internal temperature compensation		Yes
вЂ” external temperature compensation via RTD		Yes
вЂ” Compensation for 0 °C reference point temperature		Yes; fixed value can be set
вЂ” Reference channel of the module		No
Cable length
в—Џ shielded, max.		800 m; for U/I, 200 m for R/RTD, 50 m for TC
Analog outputs
Number of analog outputs		2
Voltage output, short-circuit protection		Yes
Voltage output, short-circuit current, max.		24 mA
Current output, no-load voltage, max.		22 V
Cycle time (all channels), min.		3.2 ms; ±0.5 ms, regardless of the number of activated channels
Output ranges, voltage
в—Џ 0 to 10 V		Yes
в—Џ 1 V to 5 V		Yes
в—Џ -5 V to +5 V		No
в—Џ -10 V to +10 V		Yes
Output ranges, current
в—Џ 0 to 20 mA		Yes
в—Џ -20 mA to +20 mA		Yes
в—Џ 4 mA to 20 mA		Yes
Connection of actuators
в—Џ for voltage output two-wire connection		Yes
в—Џ for voltage output four-wire connection		Yes
в—Џ for current output two-wire connection		Yes
Load impedance (in rated range of output)
в—Џ with voltage outputs, min.		1 kв„¦; 0.5 kOhm at 1 to 5 V
в—Џ with voltage outputs, capacitive load, max.		1 µF
в—Џ with current outputs, max.		750 в„¦
в—Џ with current outputs, inductive load, max.		10 mH
Cable length
в—Џ shielded, max.		800 m; for current, 200 m for voltage
Analog value generation for the inputs
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.		16 bit
в—Џ Integration time, parameterizable		Yes
в—Џ Integration time (ms)		2,5 / 16,67 / 20 / 100 ms
в—Џ Basic conversion time, including integration time (ms)		9 / 23 / 27 / 107 ms
вЂ” additional conversion time for wire-break monitoring		9 ms
вЂ” additional conversion time for resistance measurement		150 ohm, 300 ohm, 600 ohm, Pt100, Pt200, Ni100: 2 ms, 6000 ohm, Pt500, Pt1000, Ni1000, LG-Ni1000, PTC: 4 ms
в—Џ Interference voltage suppression for interference frequency f1 in Hz		400 / 60 / 50 / 10
в—Џ Time for offset calibration (per module)		Basic conversion time of the slowest channel
Smoothing of measured values
в—Џ parameterizable		Yes
в—Џ Step: None		Yes
в—Џ Step: low		Yes
в—Џ Step: Medium		Yes
в—Џ Step: High		Yes
Analog value generation for the outputs
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.		16 bit
в—Џ Conversion time (per channel)		0.5 ms
Settling time
в—Џ for resistive load		1.5 ms
в—Џ for capacitive load		2.5 ms
в—Џ for inductive load		2.5 ms
Encoder
Connection of signal encoders
в—Џ for voltage measurement		Yes
в—Џ for current measurement as 2-wire transducer		Yes
вЂ” Burden of 2-wire transmitter, max.		820 в„¦
в—Џ for current measurement as 4-wire transducer		Yes
в—Џ for resistance measurement with two-wire connection		Yes; Only for PTC
в—Џ for resistance measurement with three-wire connection		Yes; All measuring ranges except PTC; internal compensation of the cable resistances
в—Џ for resistance measurement with four-wire connection		Yes; All measuring ranges except PTC
Errors/accuracies
Linearity error (relative to input range), (+/-)		0.02 %
Temperature error (relative to input range), (+/-)		0.005 %/K; With TC type T 0.02 ± % / K
Crosstalk between the inputs, max.		-80 dB
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-)		0.02 %
Output ripple (relative to output range, bandwidth 0 to 50 kHz), (+/-)		0.02 %
Linearity error (relative to output range), (+/-)		0.15 %
Temperature error (relative to output range), (+/-)		0.002 %/K
Crosstalk between the outputs, max.		-100 dB
Repeat accuracy in steady state at 25 °C (relative to output range), (+/-)		0.05 %
Temperature error of internal compensation		±6 °C
Operational error limit in overall temperature range
в—Џ Voltage, relative to input range, (+/-)		0.3 %
в—Џ Current, relative to input range, (+/-)		0.3 %
в—Џ Resistance, relative to input range, (+/-)		0.3 %
в—Џ Resistance thermometer, relative to input range, (+/-)		0.3 %; Ptxxx standard: ±1.5 K, Ptxxx climate: ±0.5 K, Nixxx standard: ±0.5 K, Nixxx climate: ±0.3 K
в—Џ Thermocouple, relative to input range, (+/-)		0.3 %; Type B: > 600 °C ±4.6 K, type E: > -200 °C ±1.5 K, type J: > -210 °C ±1.9 K, type K: > -200 °C ±2.4 K, type N: > -200 °C ±2.9 K, type R: > 0 °C ±4.7 K, type S: > 0 °C ±4.6 K, type T: > -200 °C ±2.4 K
в—Џ Voltage, relative to output range, (+/-)		0.3 %
в—Џ Current, relative to output range, (+/-)		0.3 %
Basic error limit (operational limit at 25 °C)
в—Џ Voltage, relative to input range, (+/-)		0.1 %
в—Џ Current, relative to input range, (+/-)		0.1 %
в—Џ Resistance, relative to input range, (+/-)		0.1 %
в—Џ Resistance thermometer, relative to input range, (+/-)		0.1 %; Ptxxx standard: ±0.7 K, Ptxxx climate: ±0.2 K, Nixxx standard: ±0.3 K, Nixxx climate: ±0.15 K
в—Џ Thermocouple, relative to input range, (+/-)		0.1 %; Type B: > 600 °C ±1.7 K, type E: > -200 °C ±0.7 K, type J: > -210 °C ±0.8 K, type K: > -200 °C ±1.2 K, type N: > -200 °C ±1.2 K, type R: > 0 °C ±1.9 K, type S: > 0 °C ±1.9 K, type T: > -200 °C ±0.8 K
в—Џ Voltage, relative to output range, (+/-)		0.2 %
в—Џ Current, relative to output range, (+/-)		0.2 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
в—Џ Series mode interference (peak value of interference < rated value of input range), min.		40 dB
в—Џ Common mode voltage, max.		10 V
в—Џ Common mode interference, min.		60 dB
Isochronous mode
Isochronous operation (application synchronized up to terminal)		No
Interrupts/diagnostics/status information
Diagnostics function		Yes
Substitute values connectable		Yes
Alarms
в—Џ Diagnostic alarm		Yes
в—Џ Limit value alarm		Yes; two upper and two lower limit values in each case
Diagnostic messages
в—Џ Monitoring the supply voltage		Yes
в—Џ Wire-break		Yes; only for input type 1 ... 5 V, 4 ... 20 mA, TC, R, RTD and output type current
в—Џ Short-circuit		Yes; Only for output type "voltage"
в—Џ Overflow/underflow		Yes
Diagnostics indication LED
в—Џ RUN LED		Yes; Green LED
в—Џ ERROR LED		Yes; Red LED
в—Џ Monitoring of the supply voltage (PWR-LED)		Yes; Green LED
в—Џ Channel status display		Yes; Green LED
в—Џ for channel diagnostics		Yes; Red LED
в—Џ for module diagnostics		Yes; Red LED
Potential separation
Potential separation analog inputs
в—Џ between the channels		No
в—Џ between the channels, in groups of		4
в—Џ between the channels and backplane bus		Yes
в—Џ Between the channels and load voltage L+		Yes
Potential separation analog outputs
в—Џ between the channels		No
в—Џ between the channels, in groups of		2
в—Џ between the channels and backplane bus		Yes
в—Џ Between the channels and load voltage L+		Yes
Permissible potential difference
between the inputs (UCM)		20 V DC
Between the inputs and MANA (UCM)		10 V DC
between S- and MANA (UCM)		8 V DC
Isolation
Isolation tested with		707 V DC (type test)
Ambient conditions
Ambient temperature during operation
в—Џ horizontal installation, min.		0 °C
в—Џ horizontal installation, max.		60 °C
в—Џ vertical installation, min.		0 °C
в—Џ vertical installation, max.		40 °C
Decentralized operation
Prioritized startup		No
Dimensions
Width		25 mm
Height		147 mm
Depth		129 mm
Weights
Weight, approx.		250 g
Other
Note:		Supplied incl. 40-pole push-in front connectors. Additional basic error and noise for integration time = 2.5 ms: Voltage: ±250 mV (±0.02%), ±80 mV (±0.05%), ±50 mV (±0.05%); resistance: 150 Ohms (±0.02%); resistance thermometer: Pt100 climate: ±0.08 K, Ni100 climate: ±0.08 K; thermoelement: Type B, R, S: ±3 K, type E, J, K, N, T: ±1 K

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания