CPU 1217C . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на CPU 1217C

| | | | | | | |

Article number		6ES7217-1AG40-0XB0
		CPU 1217C, DC/DC/DC, 14DI/10DQ/2AI/2AQ
General information
Product type designation		CPU 1217C DC/DC/DC
Firmware version		V4.2
Engineering with
в—Џ Programming package		STEP 7 V14 or higher
Supply voltage
Rated value (DC)
в—Џ 24 V DC		Yes
permissible range, lower limit (DC)		20.4 V
permissible range, upper limit (DC)		28.8 V
Reverse polarity protection		Yes
Load voltage L+
в—Џ Rated value (DC)		24 V
в—Џ permissible range, lower limit (DC)		20.4 V
в—Џ permissible range, upper limit (DC)		28.8 V
Input current
Current consumption (rated value)		600 mA; CPU only
Current consumption, max.		1 600 mA; CPU with all expansion modules
Inrush current, max.		12 A; at 28.8 V DC
IІt		0.5 AІ·s
Output current
for backplane bus (5 V DC), max.		1 600 mA; Max. 5 V DC for SM and CM
Encoder supply
24 V encoder supply
в—Џ 24 V		L+ minus 4 V DC min.
Power loss
Power loss, typ.		12 W
Memory
Work memory
в—Џ integrated		150 kbyte
в—Џ expandable		No
Load memory
в—Џ integrated		4 Mbyte
в—Џ Plug-in (SIMATIC Memory Card), max.		with SIMATIC memory card
Backup
в—Џ present		Yes
в—Џ maintenance-free		Yes
в—Џ without battery		Yes
CPU processing times
for bit operations, typ.		0.08 µs; / instruction
for word operations, typ.		1.7 µs; / instruction
for floating point arithmetic, typ.		2.3 µs; / Operation
CPU-blocks
Number of blocks (total)		DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used
OB
в—Џ Number, max.		Limited only by RAM for code
Data areas and their retentivity
Retentive data area (incl. timers, counters, flags), max.		10 kbyte
Flag
в—Џ Number, max.		8 kbyte; Size of bit memory address area
Local data
в—Џ per priority class, max.		16 kbyte; Priority class 1 (program cycle): 16 KB, priority class 2 to 26: 6 KB
Process image
в—Џ Inputs, adjustable		1 kbyte
в—Џ Outputs, adjustable		1 kbyte
Hardware configuration
Number of modules per system, max.		3 comm. modules, 1 signal board, 8 signal modules
Time of day
Clock
в—Џ Hardware clock (real-time)		Yes
в—Џ Backup time		480 h; Typical
в—Џ Deviation per day, max.		±60 s/month at 25 °C
Digital inputs
Number of digital inputs		14; Integrated
в—Џ of which inputs usable for technological functions		6; HSC (High Speed Counting)
Source/sink input		Yes
Number of simultaneously controllable inputs
all mounting positions
вЂ” up to 40 °C, max.		14
Input voltage
в—Џ Rated value (DC)		24 V
в—Џ for signal "0"		5 V DC at 1 mA
в—Џ for signal "1"		15 V DC at 2.5 mA
Input delay (for rated value of input voltage)
for standard inputs
вЂ” parameterizable		0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four
вЂ” at "0" to "1", min.		0.2 ms
вЂ” at "0" to "1", max.		12.8 ms
for interrupt inputs
вЂ” parameterizable		Yes
for counter/technological functions
вЂ” parameterizable		Single phase: 3 @ 100 kHz & 3 @ 30 kHz, differential: 3 @ 80 kHz & 3 @ 30 kHz
Cable length
в—Џ shielded, max.		500 m; 50 m for technological functions
в—Џ unshielded, max.		300 m; For technological functions: No
Digital outputs
Number of digital outputs		10
в—Џ of which high-speed outputs		4; 100 kHz Pulse Train Output
Limitation of inductive shutdown voltage to		L+ (-48 V)
Switching capacity of the outputs
в—Џ with resistive load, max.		0.5 A
в—Џ on lamp load, max.		5 W
Output voltage
в—Џ for signal "0", max.		0.1 V; with 10 kOhm load
в—Џ for signal "1", min.		20 V
Output current
в—Џ for signal "1" rated value		0.5 A
в—Џ for signal "0" residual current, max.		0.1 mA
Output delay with resistive load
в—Џ "0" to "1", max.		1 µs
в—Џ "1" to "0", max.		5 µs
Switching frequency
в—Џ of the pulse outputs, with resistive load, max.		100 kHz
Cable length
в—Џ shielded, max.		500 m
в—Џ unshielded, max.		150 m
Analog inputs
Number of analog inputs		2
Input ranges
в—Џ Voltage		Yes
Input ranges (rated values), voltages
в—Џ 0 to +10 V		Yes
в—Џ Input resistance (0 to 10 V)		в‰Ґ100k ohms
Cable length
в—Џ shielded, max.		100 m; twisted and shielded
Analog outputs
Number of analog outputs		2
Output ranges, current
в—Џ 0 to 20 mA		Yes
Analog value generation for the inputs
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.		10 bit
в—Џ Integration time, parameterizable		Yes
в—Џ Conversion time (per channel)		625 µs
Analog value generation for the outputs
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.		10 bit
Encoder
Connectable encoders
в—Џ 2-wire sensor		Yes
1. Interface
Interface type		PROFINET
Physics		Ethernet
Isolated		Yes
automatic detection of transmission rate		Yes
Autonegotiation		Yes
Autocrossing		Yes
Interface types
в—Џ Number of ports		2
в—Џ integrated switch		Yes
Functionality
в—Џ PROFINET IO Controller		Yes
в—Џ PROFINET IO Device		Yes
в—Џ SIMATIC communication		Yes
в—Џ Open IE communication		Yes
в—Џ Web server		Yes
в—Џ Media redundancy		Yes; as MRP client
PROFINET IO Controller
в—Џ Transmission rate, max.		100 Mbit/s
Services
вЂ” PG/OP communication		Yes
вЂ” S7 routing		Yes
вЂ” Isochronous mode		No
вЂ” Open IE communication		Yes
вЂ” IRT		No
вЂ” MRP		Yes; as MRP client
вЂ” MRPD		No
вЂ” PROFIenergy		No
вЂ” Prioritized startup		Yes
вЂ” Number of IO devices with prioritized startup, max.		16
вЂ” Number of connectable IO Devices, max.		16
вЂ” Number of connectable IO Devices for RT, max.		16
вЂ” of which in line, max.		16
вЂ” Activation/deactivation of IO Devices		Yes
вЂ” Number of IO Devices that can be simultaneously activated/deactivated, max.		8
вЂ” Updating time		The minimum value of the update time also depends on the communication component set for PROFINET IO, on the number of IO devices and the quantity of configured user data.
PROFINET IO Device
Services
вЂ” PG/OP communication		Yes
вЂ” S7 routing		Yes
вЂ” Isochronous mode		No
вЂ” Open IE communication		Yes
вЂ” IRT		No
вЂ” MRP		Yes; as MRP client
вЂ” MRPD		No
вЂ” PROFIenergy		Yes
вЂ” Shared device		Yes
вЂ” Number of IO Controllers with shared device, max.		2
Protocols
Supports protocol for PROFINET IO		Yes
PROFIBUS		Yes; CM 1243-5 required
AS-Interface		Yes; CM 1243-2 required
Protocols (Ethernet)
в—Џ TCP/IP		Yes
в—Џ DHCP		No
в—Џ SNMP		Yes
в—Џ DCP		Yes
в—Џ LLDP		Yes
Open IE communication
в—Џ TCP/IP		Yes
вЂ” Data length, max.		8 kbyte
в—Џ ISO-on-TCP (RFC1006)		Yes
вЂ” Data length, max.		8 kbyte
в—Џ UDP		Yes
вЂ” Data length, max.		1 472 byte
Web server
в—Џ User-defined websites		Yes
Further protocols
в—Џ MODBUS		Yes
Communication functions
S7 communication
в—Џ supported		Yes
в—Џ as server		Yes
в—Џ as client		Yes
в—Џ User data per job, max.		See online help (S7 communication, user data size)
Web server
в—Џ supported		Yes
Number of connections
в—Џ overall		16; dynamically
Test commissioning functions
Status/control
в—Џ Status/control variable		Yes
в—Џ Variables		Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters
Forcing
в—Џ Forcing		Yes
Diagnostic buffer
в—Џ present		Yes
Traces
в—Џ Number of configurable Traces		2
в—Џ Memory size per trace, max.		512 kbyte
Interrupts/diagnostics/status information
Diagnostics indication LED
в—Џ RUN/STOP LED		Yes
в—Џ ERROR LED		Yes
в—Џ MAINT LED		Yes
Integrated Functions
Number of counters		6
Counting frequency (counter) max.		1 MHz
Frequency measurement		Yes
controlled positioning		Yes
Number of position-controlled positioning axes, max.		8
Number of positioning axes via pulse-direction interface		4; With integrated outputs
PID controller		Yes
Number of alarm inputs		4
Number of pulse outputs		4
Limit frequency (pulse)		1 MHz
Potential separation
Potential separation digital inputs
в—Џ Potential separation digital inputs		No
в—Џ between the channels, in groups of		1
Potential separation digital outputs
в—Џ Potential separation digital outputs		Yes
в—Џ between the channels		No
в—Џ between the channels, in groups of		1
EMC
Interference immunity against discharge of static electricity
в—Џ Interference immunity against discharge of static electricity acc. to IEC 61000-4-2		Yes
вЂ” Test voltage at air discharge		8 kV
вЂ” Test voltage at contact discharge		6 kV
Interference immunity to cable-borne interference
в—Џ Interference immunity on supply lines acc. to IEC 61000-4-4		Yes
в—Џ Interference immunity on signal cables acc. to IEC 61000-4-4		Yes
Interference immunity against voltage surge
в—Џ on the supply lines acc. to IEC 61000-4-5		Yes
Interference immunity against conducted variable disturbance induced by high-frequency fields
в—Џ Interference immunity against high-frequency radiation acc. to IEC 61000-4-6		Yes
Emission of radio interference acc. to EN 55 011
в—Џ Limit class A, for use in industrial areas		Yes; Group 1
в—Џ Limit class B, for use in residential areas		Yes; When appropriate measures are used to ensure compliance with the limits for Class B according to EN 55011
Degree and class of protection
Degree of protection acc. to EN 60529
в—Џ IP20		Yes
Standards, approvals, certificates
CE mark		Yes
UL approval		Yes
cULus		Yes
FM approval		Yes
RCM (formerly C-TICK)		Yes
KC approval		Yes
Marine approval		Yes
Ambient conditions
Free fall
в—Џ Fall height, max.		0.3 m; five times, in product package
Ambient temperature during operation
в—Џ min.		-20 °C
в—Џ max.		60 °C; Number of simultaneously activated inputs or outputs 7 or 5 (no adjacent points) at 60 °C horizontal or 50 °C vertical, 14 or 10 at 55 °C horizontal or 45 °C vertical
в—Џ horizontal installation, min.		-20 °C
в—Џ horizontal installation, max.		60 °C
в—Џ vertical installation, min.		-20 °C
в—Џ vertical installation, max.		50 °C
Ambient temperature during storage/transportation
в—Џ min.		-40 °C
в—Џ max.		70 °C
Air pressure acc. to IEC 60068-2-13
в—Џ Operation, min.		795 hPa
в—Џ Operation, max.		1 080 hPa
в—Џ Storage/transport, min.		660 hPa
в—Џ Storage/transport, max.		1 080 hPa
в—Џ Installation altitude, min.		-1 000 m
в—Џ Installation altitude, max.		2 000 m
Relative humidity
в—Џ Operation, max.		95 %; no condensation
Vibrations
в—Џ Vibration resistance during operation acc. to IEC 60068-2-6		2 g (m/sІ) wall mounting, 1 g (m/sІ) DIN rail
в—Џ Operation, tested according to IEC 60068-2-6		Yes
Shock testing
в—Џ tested according to IEC 60068-2-27		Yes; IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms
Pollutant concentrations
в—Џ SO2 at RH < 60% without condensation		S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60% condensation-free
Programming
Programming language
вЂ” LAD		Yes
вЂ” FBD		Yes
вЂ” SCL		Yes
Know-how protection
в—Џ User program protection/password protection		Yes
в—Џ Copy protection		Yes
в—Џ Block protection		Yes
Access protection
в—Џ Protection level: Write protection		Yes
в—Џ Protection level: Read/write protection		Yes
в—Џ Protection level: Complete protection		Yes
Cycle time monitoring
в—Џ adjustable		Yes
Dimensions
Width		150 mm
Height		100 mm
Depth		75 mm
Weights
Weight, approx.		530 g