The control unit can supply a single sensor or a system consisting of two sensors with power. Several sensors that are connected via a network can also be connected to the D-ISC 100. In this case, each of the sensors must be supplied with power by means of a separate terminal box, supply unit or evaluation unit. The interconnection and the connection to the operating unit is made via Modbus. A version of the control unit with an integrated purge air blower is available for D‑R 220, D‑R 320 and D‑R 808.

The display provides an immediate overview of the status of the connected devices. The current measured values can be displayed without the necessity of direct access to the sensors. It is also possible to visualize the measured values with bar chart display.

The connected sensors can be queried, controlled and parameterized with the control unit. Operation takes place directly via the membrane keyboard of the control unit. Alternatively, you can connect a PC via the integrated USB port. In conjunction with the Web server technology software D-ESI 100, remote support is possible via the Internet.

The control unit can be extended with expansion modules. They are available either as software modules (e.g. Modbus RTU, Modbus TCP) or DIN rail modules (e.g. analog input/output, digital input/output).

Certifications

Type-tested according to European directive EN 15267 for continuous emission measurements in connection with the test reports no. 936/21217455, 936/21218492, 936/21218490 and 936/21232768/B of the Technical Inspectorate of the Rhineland region (TГњV Rheinland)