Inscription of actuators and indicators

Actuators and indicators of plastic as well as metal version can be optionally inscribed with a laser.

Example of laser inscription

The actuators of the pushbuttons, illuminated pushbuttons, twin pushbuttons, mushroom pushbuttons, illuminated mushroom pushbuttons, EMERGENCY STOP mushroom pushbuttons (without lock), the lenses of the indicator lights, and the acoustic signaling devices can all be inscribed.

Version

Text inscriptions have centered alignment and a font height of 4 mm as standard.

The typeface used is Arial. Other letter heights and typefaces are possible, but must be specified when ordering.

The maximum possible number of characters per line is:

• 10 characters for one line of text
• 8 characters for 2 lines of text
• 6 characters for 3 lines of text, but 10 characters in the middle line

Note

Selected pushbuttons and twin pushbuttons can be supplied as standard with inscribed letters or symbols.

Selector switches, key-operated switches and toggle switches can be inscribed only if they are made of plastic (only one text line on the front ring and the supplement Y19).

Assignment of the positions on the actuator

Circle

Ordering notes

To order, the inscribed actuators and indicators can be selected via the SIRIUS ACT Configurator. An electronic order form is then generated.

For configurator, see

• http://www.siemens.com/sirius-act/configurator
• Electronic Catalog CA 01 on DVD or
• Industry Mall: http://www.siemens.com/industrymall

When ordering, add "–Z" and an order code to the article number of the actuator element or the indicator light:

• Y10: Text line in upper/lower case, all lines begin with upper case letters (e.g. line 1: Text:/ line 2: Text)
• Y11: Text in upper case (e.g. LIFT)
• Y12: Text in lower case (e.g. lift / off / lower):
• Y15: Text in upper/lower case, all words begin with upper case letters (e.g. On / Off)
• Y13: Symbol with number according to ISO 7000 or IEC 60417
• Y19: Inscription of choice, text or symbol, can only be ordered via SIRIUS ACT Configurator with a Configuration Identification Number (CIN)

When ordering, specify the required inscription in plain text without spaces, in addition to the article number and order code. In the case of special inscriptions with words in languages other than German, give the exact spelling and specify the language. In the case of symbols with number, quote the corresponding standard (see ordering example 1).

In the case of multi-line inscriptions, the text must be assigned to the respective line, e.g. Z1=Lift, Z2=Lower.

Symbols can also be ordered with numbers according to ISO 7000 or IEC 60417 (see ordering example 2 and 3).

The SIRIUS ACT Configurator must be used to select special inscriptions and symbols (order code Y19).
In this case a CIN (Configuration Identification Number) is generated for placement of future orders.
It is then possible to place an order directly using the CIN and the SIRIUS ACT Configurator (Mall shopping cart) or via the standard ordering channels.

Ordering example 1

A round pushbutton with the inscription "Reset" is required:

3SU1030–0AB20–0AA0-Z
Y10
Z=Reset

Ordering example 2

A pushbutton inscribed with symbol No. 5389 according to IEC 60417 is required:

3SU1030–0ABD20–0AA0-Z
Y13
Z=5389 IEC

Ordering example 3

A selector switch with 2 switch positions and multi-line inscription on the front ring is required:

3SU1002-2BF10-0AA0-Z
Z8=0
Z2=I