CANopen is a widely used industrial bus system and can be used for a variety of different applications. The module allows simple and cost-effective connection of CANopen applications to SIMATIC.

• Control of hydraulic valves/axes in vehicles
• Control of motors in packaging machines or conveyors
• Capturing of angular encoder positions in wind turbines
• Capturing of control devices on machines, e.g. joysticks
• Capturing the measured data of path encoders, inclinometers or angular encoders, e.g. for tower cranes and gantry cranes

The CM CANopen module has the following properties:

• Interface module for CANopen (master/slave) for SIMATIC S7-1200
• Connection of up to 16 CANopen slave stations in the master mode
• 256 bytes of input data and 256 bytes of output data per module
• Connection of up to 3 modules per CPU
• 3 LEDs for module, network and I/O status diagnostics
• Possible integration of the module into the hardware catalog of the TIA Portal configuration suite
• Supports Transparent CAN 2.0A for processing customer-specific protocols
• CANopen implementation according to communication profiles CiA 301 Rev. 4.2 and CiA 302 Rev. 4.1 (master)