CPU 416H . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на CPU 416H

| | | | | | |

Article number		6GK5792-4DN00-0AA6
		CPU416-5H PN/DP, 16MB F. S7-400H/F/FH
General information
Product type designation		CPU 416-5H PN/DP
HW functional status		1
Firmware version		V6.0
Engineering with
в—Џ Programming package		As of STEP 7 V5.5 SP2 with HF1
CiR – Configuration in RUN
CiR synchronization time, basic load		100 ms
CiR synchronization time, time per I/O byte		0 µs
Supply voltage
Rated value (DC)
в—Џ 24 V DC		No; Power supply via system power supply
Input current
from backplane bus 5 V DC, typ.		1.6 A
from backplane bus 5 V DC, max.		1.9 A
from backplane bus 24 V DC, max.		150 mA; 150 mA per DP interface
from interface 5 V DC, max.		90 mA; At each DP interface
Power loss
Power loss, typ.		7.5 W
Memory
Type of memory		other
Work memory
в—Џ integrated		16 Mbyte
в—Џ integrated (for program)		6 Mbyte
в—Џ integrated (for data)		10 Mbyte
в—Џ expandable		No
Load memory
в—Џ expandable FEPROM		Yes; with Memory Card (FLASH)
в—Џ expandable FEPROM, max.		64 Mbyte
в—Џ integrated RAM, max.		1 Mbyte
в—Џ expandable RAM		Yes
в—Џ expandable RAM, max.		64 Mbyte
Backup
в—Џ present		Yes
в—Џ with battery		Yes; all data
в—Џ without battery		No
Battery
Backup battery
в—Џ Backup current, typ.		180 µA; Valid up to 40°C
в—Џ Backup current, max.		1 000 µA
в—Џ Backup time, max.		Dealt with in the module data manual with the secondary conditions and the factors of influence
в—Џ Feeding of external backup voltage to CPU		5 V DC to 15 V DC
CPU processing times
for bit operations, typ.		12.5 ns
for word operations, typ.		12.5 ns
for fixed point arithmetic, typ.		12.5 ns
for floating point arithmetic, typ.		25 ns
CPU-blocks
DB
в—Џ Number, max.		16 000; Number range: 1 to 16000
в—Џ Size, max.		64 kbyte
FB
в—Џ Number, max.		8 000; Number range: 0 to 7999
в—Џ Size, max.		64 kbyte
FC
в—Џ Number, max.		8 000; Number range: 0 to 7999
в—Џ Size, max.		64 kbyte
OB
в—Џ Number, max.		see instruction list
в—Џ Size, max.		64 kbyte
в—Џ Number of free cycle OBs		1; OB 1
в—Џ Number of time alarm OBs		8; OB 10-17
в—Џ Number of delay alarm OBs		4; OB 20-23
в—Џ Number of cyclic interrupt OBs		9; OB 30-38
в—Џ Number of process alarm OBs		8; OB 40-47
в—Џ Number of DPV1 alarm OBs		3; OB 55-57
в—Џ Number of startup OBs		2; OB 100, 102
в—Џ Number of asynchronous error OBs		9; OB 80-88
в—Џ Number of synchronous error OBs		2; OB 121, 122
Nesting depth
в—Џ per priority class		24
в—Џ additional within an error OB		2
Counters, timers and their retentivity
S7 counter
в—Џ Number		2 048
Retentivity
вЂ” adjustable		Yes
вЂ” lower limit		0
вЂ” upper limit		2 047
вЂ” preset		Z 0 to Z 7
Counting range
вЂ” lower limit		0
вЂ” upper limit		999
IEC counter
в—Џ Number		Unlimited (limited only by RAM capacity)
S7 times
в—Џ Number		2 048
Retentivity
вЂ” adjustable		Yes
вЂ” lower limit		0
вЂ” upper limit		2 047
вЂ” preset		No times retentive
Time range
вЂ” lower limit		10 ms
вЂ” upper limit		9 990 s
IEC timer
в—Џ present		Yes
в—Џ Type		SFB
в—Џ Number		Unlimited (limited only by RAM capacity)
Data areas and their retentivity
retentive data area in total		Total working and load memory (with backup battery)
Flag
в—Џ Number, max.		16 384 byte
в—Џ Retentivity available		Yes
в—Џ Retentivity preset		MB 0 to MB 15
в—Џ Number of clock memories		8; in 1 memory byte
Data blocks
в—Џ Number, max.		16 000; Number range: 1 to 16000
в—Џ Size, max.		64 kbyte
Local data
в—Џ adjustable, max.		64 kbyte
в—Џ preset		32 kbyte
Address area
I/O address area
в—Џ Inputs		16 kbyte
в—Џ Outputs		16 kbyte
of which distributed
вЂ” MPI/DP interface, inputs		2 kbyte
вЂ” MPI/DP interface, outputs		2 kbyte
вЂ” DP interface, inputs		8 kbyte
вЂ” DP interface, outputs		8 kbyte
вЂ” PROFINET interface, inputs		8 kbyte
вЂ” PROFINET interface, outputs		8 kbyte
Process image
в—Џ Inputs, adjustable		16 kbyte
в—Џ Outputs, adjustable		16 kbyte
в—Џ Inputs, default		1 024 byte
в—Џ Outputs, default		1 024 byte
в—Џ consistent data, max.		244 byte
в—Џ Access to consistent data in process image		Yes
Subprocess images
в—Џ Number of subprocess images, max.		15
Digital channels
в—Џ Inputs		131 072
вЂ” of which central		131 072
в—Џ Outputs		131 072
вЂ” of which central		131 072
в—Џ Number of addressable digital I/Os, max.		131 072
Analog channels
в—Џ Inputs		8 192
вЂ” of which central		8 192
в—Џ Outputs		8 192
вЂ” of which central		8 192
в—Џ Number of addressable analog I/Os, max.		8 192
Hardware configuration
Number of expansion units, max.		21
connectable OPs		95
Multicomputing		No
Interface modules
в—Џ Number of connectable IMs (total), max.		6
в—Џ Number of connectable IM 460s, max.		6
в—Џ Number of connectable IM 463s, max.		4; Single mode only
Number of DP masters
в—Џ integrated		2
в—Џ via CP		10; CP 443-5 Extended
в—Џ Mixed mode IM + CP permitted		No
в—Џ via interface module		0
Number of IO Controllers
в—Џ integrated		1
в—Џ via CP		0
Number of operable FMs and CPs (recommended)
в—Џ FM		See manual Automation System S7-400H fault-tolerant systems. Limited by number of slots and number of connections
в—Џ CP, PtP		See manual Automation System S7-400H fault-tolerant systems. Limited by number of slots and number of connections
в—Џ PROFIBUS and Ethernet CPs		14; Of which max. 10 CP as DP master
Slots
в—Џ required slots		2
Time of day
Clock
в—Џ Hardware clock (real-time)		Yes
в—Џ retentive and synchronizable		Yes
в—Џ Resolution		1 ms
в—Џ Deviation per day (buffered), max.		1.7 s; Power off
в—Џ Deviation per day (unbuffered), max.		8.6 s; Power on
Operating hours counter
в—Џ Number		16
в—Џ Number/Number range		0 to 15
в—Џ Range of values		SFCs 2, 3 and 4: 0 to 32767 hours SFC 101: 0 to 2^31 - 1 hours
в—Џ Granularity		1 hour
в—Џ retentive		Yes
Clock synchronization
в—Џ supported		Yes
в—Џ to MPI, master		Yes
в—Џ to MPI, slave		Yes
в—Џ to DP, master		Yes
в—Џ to DP, slave		Yes
в—Џ in AS, master		Yes
в—Џ in AS, slave		Yes
в—Џ on Ethernet via NTP		Yes; As client
Time difference in system when synchronizing via
в—Џ Ethernet, max.		10 ms; Via NTP
в—Џ MPI, max.		200 ms
Interfaces
Number of RS 485 interfaces		2
Number of other interfaces		2; Fiber-optic interface
1. Interface
Interface type		Integrated
Physics		RS 485 / PROFIBUS + MPI
Isolated		Yes
Power supply to interface (15 to 30 V DC), max.		150 mA
Number of connection resources		MPI: 44, DP: 32
Functionality
в—Џ MPI		Yes
в—Џ PROFIBUS DP master		Yes
в—Џ PROFIBUS DP slave		No
MPI
в—Џ Number of connections		44; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1
в—Џ Transmission rate, max.		12 Mbit/s
Services
вЂ” PG/OP communication		Yes
вЂ” Routing		Yes
вЂ” Global data communication		No
вЂ” S7 basic communication		No
вЂ” S7 communication		Yes
вЂ” S7 communication, as client		Yes
вЂ” S7 communication, as server		Yes
DP master
в—Џ Number of connections, max.		32; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1
в—Џ Transmission rate, max.		12 Mbit/s
в—Џ Number of DP slaves, max.		32
Services
вЂ” PG/OP communication		Yes
вЂ” Routing		Yes
вЂ” Global data communication		No
вЂ” S7 basic communication		No
вЂ” S7 communication		Yes
вЂ” S7 communication, as client		Yes
вЂ” S7 communication, as server		Yes
вЂ” Equidistance		No
вЂ” Isochronous mode		No
вЂ” SYNC/FREEZE		No
вЂ” Activation/deactivation of DP slaves		No
вЂ” Direct data exchange (slave-to-slave communication)		No
вЂ” DPV1		Yes
Address area
вЂ” Inputs, max.		2 kbyte
вЂ” Outputs, max.		2 kbyte
User data per DP slave
вЂ” User data per DP slave, max.		244 byte
вЂ” Inputs, max.		244 byte
вЂ” Outputs, max.		244 byte
вЂ” Slots, max.		244
вЂ” per slot, max.		128 byte
DP slave
в—Џ Number of connections		No configuration of CPU as DP slave
2. Interface
Interface type		PROFINET
Physics		Ethernet RJ45
Isolated		Yes
automatic detection of transmission rate		Yes; Autosensing
Autonegotiation		Yes
Autocrossing		Yes
Change of IP address at runtime, supported		No
Number of connection resources		96
Interface types
в—Џ Number of ports		2
в—Џ integrated switch		Yes
Media redundancy
в—Џ supported		Yes
в—Џ Switchover time on line break, typ.		200 ms
в—Џ Number of stations in the ring, max.		50
Functionality
в—Џ PROFINET IO Controller		Yes
в—Џ PROFINET IO Device		No
в—Џ PROFINET CBA		No
в—Џ PROFIBUS DP master		No
в—Џ PROFIBUS DP slave		No
в—Џ Open IE communication		Yes
в—Џ Web server		No
в—Џ Point-to-point connection		No
PROFINET IO Controller
в—Џ Transmission rate, max.		100 Mbit/s
Services
вЂ” PG/OP communication		Yes
вЂ” S7 routing		Yes
вЂ” S7 communication		Yes
вЂ” Isochronous mode		No
вЂ” Open IE communication		Yes
вЂ” Shared device		Yes; Single mode only
вЂ” Prioritized startup		No
вЂ” Number of connectable IO Devices, max.		256; In redundant mode via both interfaces
вЂ” Number of connectable IO Devices for RT, max.		256
вЂ” of which in line, max.		256
вЂ” Activation/deactivation of IO Devices		No
вЂ” IO Devices changing during operation (partner ports), supported		No
вЂ” Device replacement without swap medium		Yes
вЂ” Send cycles		250 µs, 500 µs, 1 ms, 2 ms, 4 ms
вЂ” Updating time		250 µs to 512 ms, minimum value depends on the number of configured user data and the configured single or redundant mode
Address area
вЂ” Inputs, max.		8 kbyte
вЂ” Outputs, max.		8 kbyte
вЂ” User data consistency, max.		1 024 byte
Open IE communication
в—Џ Number of connections, max.		94
в—Џ Local port numbers used at the system end		0, 20, 21, 25, 102, 135, 161, 34962, 34963, 34964, 65532, 65533, 65534, 65535
в—Џ Keep-alive function, supported		Yes
3. Interface
Interface type		Integrated
Physics		RS 485 / PROFIBUS
Power supply to interface (15 to 30 V DC), max.		150 mA
Number of connection resources		32
Functionality
в—Џ PROFIBUS DP master		Yes
в—Џ PROFIBUS DP slave		No
DP master
в—Џ Number of connections, max.		32
в—Џ Number of DP slaves, max.		125
Services
вЂ” PG/OP communication		Yes
вЂ” Routing		Yes
вЂ” Global data communication		No
вЂ” S7 basic communication		No
вЂ” S7 communication		Yes
вЂ” S7 communication, as client		Yes
вЂ” S7 communication, as server		Yes
вЂ” Equidistance		No
вЂ” Isochronous mode		No
вЂ” SYNC/FREEZE		No
вЂ” Activation/deactivation of DP slaves		No
вЂ” Direct data exchange (slave-to-slave communication)		No
вЂ” DPV0		Yes
вЂ” DPV1		Yes
Address area
вЂ” Inputs, max.		8 kbyte
вЂ” Outputs, max.		8 kbyte
User data per DP slave
вЂ” User data per DP slave, max.		244 byte
вЂ” Inputs, max.		244 byte
вЂ” Outputs, max.		244 byte
вЂ” Slots, max.		244
вЂ” per slot, max.		128 byte
4. Interface
Interface type		Pluggable synchronization submodule (FO)
Plug-in interface modules		Synchronization modules 6ES7960-1AA06-0XA0 or 6ES7960-1AB06-0XA0
5. Interface
Interface type		Pluggable synchronization submodule (FO)
Plug-in interface modules		Synchronization modules 6ES7960-1AA06-0XA0 or 6ES7960-1AB06-0XA0
Protocols
SIMATIC communication
в—Џ S7 routing		Yes
Open IE communication
в—Џ TCP/IP		Yes; via integrated PROFINET interface and loadable FBs
вЂ” Data length, max.		32 kbyte
вЂ” several passive connections per port, supported		Yes
в—Џ ISO-on-TCP (RFC1006)		Yes; Via integrated PROFINET interface or CP 443-1 and loadable FBs
вЂ” Data length, max.		32 kbyte; 1452 bytes via CP 443-1 Adv.
в—Џ UDP		Yes; via integrated PROFINET interface and loadable FBs
вЂ” Data length, max.		1 472 byte
Isochronous mode
Isochronous operation (application synchronized up to terminal)		No
Equidistance		No
Communication functions
PG/OP communication		Yes
в—Џ Number of connectable OPs without message processing		95
в—Џ Number of connectable OPs with message processing		95; When using Alarm_S/SQ and Alarm_D/DQ
Data record routing		Yes
Global data communication
в—Џ supported		No
S7 basic communication
в—Џ supported		No
S7 communication
в—Џ supported		Yes
в—Џ as server		Yes
в—Џ as client		Yes
в—Џ User data per job, max.		64 kbyte
в—Џ User data per job (of which consistent), max.		462 byte; 1 variable
S5 compatible communication
в—Џ supported		Yes; (via CP max. 10 and FC AG_SEND and FC AG_RECV)
в—Џ User data per job, max.		8 kbyte
в—Џ User data per job (of which consistent), max.		240 byte
в—Џ Number of simultaneous AG-SEND/AG-RECV orders per CPU, max.		64/64
Standard communication (FMS)
в—Џ supported		Yes; Via CP and loadable FB
Web server
в—Џ supported		No
Number of connections
в—Џ overall		96
в—Џ usable for PG communication
вЂ” reserved for PG communication		1
вЂ” adjustable for PG communication, max.		0
в—Џ usable for OP communication
вЂ” reserved for OP communication		1
вЂ” adjustable for OP communication, max.		0
в—Џ usable for S7 basic communication
вЂ” reserved for S7 basic communication		0
вЂ” adjustable for S7 basic communication, max.		0
в—Џ usable for S7 communication
вЂ” reserved for S7 communication		0
вЂ” adjustable for S7 communication, max.		0
в—Џ usable for routing
вЂ” reserved for routing		0
вЂ” adjustable for routing, max.		0
S7 message functions
Number of login stations for message functions, max.		95; Max. 95 with Alarm_S/SQ and Alarm_D/DQ (OPs); max. 8 with Alarm, Alarm_8, Alarm_8P, Notify and Notify_8 (e.g. WinCC)
Symbol-related messages		No
SCAN procedure		No
Program alarms		Yes
Process diagnostic messages		Yes
simultaneously active Alarm-S blocks, max.		1 000; Simultaneously active alarm_S/SQ blocks or alarm_D/DQ blocks
Alarm 8-blocks		Yes
в—Џ Number of instances for alarm 8 and S7 communication blocks, max.		10 000
в—Џ preset, max.		1 200
Process control messages		Yes
Number of archives that can log on simultaneously (SFB 37 AR_SEND)		64
Test commissioning functions
Status block		Yes
Single step		Yes
Number of breakpoints		16
Status/control
в—Џ Status/control variable		Yes; Up to 16 variable tables
в—Џ Variables		Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters
в—Џ Number of variables, max.		70
Forcing
в—Џ Forcing		Yes
в—Џ Forcing, variables		Inputs/outputs, bit memories, distributed I/Os
в—Џ Number of variables, max.		512
Diagnostic buffer
в—Џ present		Yes
в—Џ Number of entries, max.		3 200
вЂ” adjustable		Yes
вЂ” preset		120
Service data
в—Џ can be read out		Yes
EMC
Emission of radio interference acc. to EN 55 011
в—Џ Limit class A, for use in industrial areas		Yes
в—Џ Limit class B, for use in residential areas		No
Configuration
Configuration software
в—Џ STEP 7		Yes
Programming
в—Џ Command set		see instruction list
в—Џ Nesting levels		7
в—Џ Access to consistent data in process image		Yes
в—Џ System functions (SFC)		see instruction list
в—Џ System function blocks (SFB)		see instruction list
Programming language
вЂ” LAD		Yes
вЂ” FBD		Yes
вЂ” STL		Yes
вЂ” SCL		Yes
вЂ” CFC		Yes
вЂ” GRAPH		Yes
вЂ” HiGraph®		Yes
Number of simultaneously active SFCs
вЂ” RD_REC		8
вЂ” WR_REC		8
вЂ” WR_PARM		8
вЂ” PARM_MOD		1
вЂ” WR_DPARM		2
вЂ” DPNRM_DG		8
вЂ” RDSYSST		8
вЂ” DP_TOPOL		1
Number of simultaneously active SFBs
вЂ” RDREC		8
вЂ” WRREC		8
Know-how protection
в—Џ User program protection/password protection		Yes
в—Џ Block encryption		Yes; With S7 block Privacy
Dimensions
Width		50 mm
Height		290 mm
Depth		219 mm
Weights
Weight, approx.		995 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания