SIPLUS S7-300 SM 326 - Safety Integrated . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS S7-300 SM 326

| | | | | | |

Article number	6AG1326-2BF10-2AB0	6AG1326-2BF10-2AY0	6AG1326-2BF41-2AB0	6AG1326-2BF41-2AY0
	SIPLUS S7-300 SM326F 10 DO	SIPLUS S7-300 SM326 10F-DO	SIPLUS S7-300 SM326F DO8	SIPLUS S7-300 SM326 F DO8 EN50155
Supply voltage
Rated value (DC)	24 V; 1L+	24 V; 1L+	24 V; 1L+	24 V; 1L+
Reverse polarity protection	Yes	Yes	Yes	Yes
Load voltage L+
в—Џ Rated value (DC)	24 V; 2L+, 3L+	24 V; 2L+, 3L+	24 V; 2L+, 3L+	24 V; 2L+, 3L+
в—Џ Reverse polarity protection	No	No	No	No
Input current
from supply voltage 1L+, max.	100 mA	100 mA	75 mA	75 mA
from load voltage 2L+ (without load), max.	100 mA	100 mA	100 mA	100 mA
from load voltage 3L+ (without load), max.	100 mA	100 mA	100 mA	100 mA
from backplane bus 5 V DC, max.	100 mA	100 mA	100 mA	100 mA
Power loss
Power loss, typ.	6 W	6 W	12 W	12 W
Digital outputs
Number of digital outputs	10	10	8	8
Short-circuit protection	Yes	Yes	Yes
Limitation of inductive shutdown voltage to			L+ (-33 V)	L+ (-33 V)
Switching capacity of the outputs
в—Џ on lamp load, max.	5 W	5 W	5 W	5 W
Output voltage
в—Џ for signal "1", min.			L+ (-1.0 V)	L+ (-1.0 V)
Output current
в—Џ for signal "1" rated value	2 A	2 A	2 A	2 A
в—Џ for signal "1" permissible range for 0 to 40 °C, min.	7 mA	7 mA	7 mA	7 mA
в—Џ for signal "1" permissible range for 0 to 40 °C, max.	2.4 A	2.4 A	2 A; 2 A for horizontal installation, 1 A for vertical installation	2 A; with horizontal installation, 1 A with vertical installation
в—Џ for signal "1" permissible range for 40 to 60 °C, min.	7 mA	7 mA	7 mA	7 mA
в—Џ for signal "1" permissible range for 40 to 60 °C, max.	2.4 A	2.4 A	1 A; for horizontal installation	1 A; for horizontal installation
в—Џ for signal "0" residual current, max.	0.5 mA	0.5 mA	0.5 mA	0.5 mA
Switching frequency
в—Џ with resistive load, max.	25 Hz	25 Hz	30 Hz	30 Hz
в—Џ with inductive load, max.	25 Hz	25 Hz	2 Hz	2 Hz
в—Џ on lamp load, max.	10 Hz	10 Hz	10 Hz	10 Hz
Total current of the outputs (per group)
horizontal installation
вЂ” up to 40 °C, max.	10 A	10 A	7.5 A	7.5 A
вЂ” up to 60 °C, max.	6 A	6 A	5 A	4 A
vertical installation
вЂ” up to 40 °C, max.	5 A	5 A	5 A	5 A
Cable length
в—Џ shielded, max.	1 000 m	1 000 m	200 m; 200 m for SIL3, AK 6, Cat 4	200 m; 200 m for SIL3, AK 6, Cat 4
в—Џ unshielded, max.	600 m	600 m	200 m	200 m
Interrupts/diagnostics/status information
Alarms
в—Џ Diagnostic alarm	Yes	Yes	Yes; Parameterizable	Yes; Parameterizable
Diagnostic messages
в—Џ Diagnostic information readable	Yes	Yes	Yes	Yes
Diagnostics indication LED
в—Џ Fail-safe operation	Yes	Yes	Yes	Yes
в—Џ Group error SF (red)	Yes	Yes	Yes	Yes
Potential separation
Potential separation digital outputs
в—Џ between the channels	Yes	Yes	Yes	Yes
в—Џ between the channels, in groups of	5	5	4	4
в—Џ between the channels and backplane bus	Yes	Yes	Yes	Yes
в—Џ between the channels and the power supply of the electronics	Yes	Yes	Yes	Yes
Isolation
Isolation tested with	370V for 1 min	500V AC for 1 min (internal voltage limiting to ±120V)	500 V DC/350 V AC	500V AC for 1 min (internal voltage limiting to ±120V)
Standards, approvals, certificates
CE mark	Yes	Yes	Yes	Yes
UL approval	Yes; File E239877	Yes; File E239877	Yes; File E239877
FM approval	Yes; CofC 3028431	Yes; CofC 3028431	Yes; CofC 3028431
RCM (formerly C-TICK)	Yes	Yes	Yes	Yes
KC approval	Yes	Yes	Yes	Yes
EAC (formerly Gost-R)	Yes	Yes	Yes	Yes
Railway application
в—Џ EN 50155		Yes; Sections 4, 5 and 12; no further agreements apply; T1, Category 1, Class A/B	No	Yes; Sections 4, 5 and 12; no further agreements apply; T1, Category 1, Class A/B
Highest safety class achievable in safety mode
в—Џ acc. to EN 954	Cat. 4	Cat. 4	Cat. 4	Cat. 4
в—Џ SIL acc. to IEC 61508	SIL 3	SIL 3	SIL 3	SIL 3
Ambient conditions
Ambient temperature during operation
в—Џ min.	-25 °C	-25 °C; = Tmin	-25 °C	-25 °C; = Tmin
в—Џ max.	60 °C; = T max; *+70 °C when forced convection at a minimum air speed of 0.3 m/s through the modules is ensured. If in the course of maintenance or automatic diagnosis it is determined that the admissible specified parameters have been exceeded, the modules should be subjected to a proof test (function check) by the manufacturer.	60 °C; = Tmax; the rated temperature range of -25 ... +55 °C (T1) applies for the use on railway vehicles according to EN50155	60 °C	60 °C; = Tmax; the rated temperature range of -25 ... +55 °C (T1) applies for the use on railway vehicles according to EN50155
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)		100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!		Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Connection method
required front connector	40-pin	40-pin	40-pin	40-pin
Dimensions
Width	40 mm	40 mm	80 mm	80 mm
Height	125 mm	125 mm	125 mm	125 mm
Depth	120 mm	120 mm	120 mm	120 mm
Weights
Weight, approx.	330 g	330 g	465 g	465 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания