SIPLUS SM 531 analog input modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS SM 531 analog input modules

| | | | | |

Article number	6AG1531-7NF10-7AB0	6AG1531-7KF00-7AB0
	SIPLUS S7-1500 AI 8XU/I HS	SIPLUS S7-1500 AI 8XU/I/RTD/TC ST
General information
Product type designation	AI 8xU/I HS	AI 8xU/I/RTD/TC ST
HW functional status	E01	E01
Firmware version	V1.0.0	V1.0.0
Product function
в—Џ I&M data	Yes	Yes; I&M0 to I&M3
Engineering with
в—Џ STEP 7 TIA Portal configurable/integrated as of version	V12 / V12	V12 / V12
в—Џ STEP 7 configurable/integrated as of version	V5.5 / -	V5.5 SP3 / -
CiR – Configuration in RUN
Reparameterization possible in RUN		Yes
Calibration possible in RUN		Yes
Supply voltage
Rated value (DC)	24 V	24 V
permissible range, lower limit (DC)	20.4 V	20.4 V
permissible range, upper limit (DC)	28.8 V	28.8 V
Reverse polarity protection	Yes	Yes
Input current
Current consumption, max.	240 mA; with 24 V DC supply	240 mA; with 24 V DC supply
Encoder supply
24 V encoder supply
в—Џ Short-circuit protection	Yes	Yes
в—Џ Output current, max.	53 mA	53 mA
Power
Power available from the backplane bus	1.2 W	0.7 W
Power loss
Power loss, typ.	3.4 W	2.7 W
Analog inputs
Number of analog inputs	8; > +60 °C max. 4x ±20 mA or 4x ±10 V permissible	8
в—Џ For current measurement	8	8
в—Џ For voltage measurement	8	8
в—Џ For resistance/resistance thermometer measurement		4
в—Џ For thermocouple measurement		8
permissible input voltage for voltage input (destruction limit), max.	28.8 V	28.8 V
permissible input current for current input (destruction limit), max.	40 mA	40 mA
Technical unit for temperature measurement adjustable		Yes; °C/°F/K
Input ranges (rated values), voltages
в—Џ 1 V to 5 V	Yes	Yes
в—Џ Input resistance (1 V to 5 V)	50 kв„¦	100 kв„¦
в—Џ -1 V to +1 V		Yes
в—Џ Input resistance (-1 V to +1 V)		10 Mв„¦
в—Џ -10 V to +10 V	Yes	Yes
в—Џ Input resistance (-10 V to +10 V)	100 kв„¦	100 kв„¦
в—Џ -2.5 V to +2.5 V		Yes
в—Џ Input resistance (-2.5 V to +2.5 V)		10 Mв„¦
в—Џ -250 mV to +250 mV		Yes
в—Џ Input resistance (-250 mV to +250 mV)		10 Mв„¦
в—Џ -5 V to +5 V	Yes	Yes
в—Џ Input resistance (-5 V to +5 V)	50 kв„¦	100 kв„¦
в—Џ -50 mV to +50 mV		Yes
в—Џ Input resistance (-50 mV to +50 mV)		10 Mв„¦
в—Џ -500 mV to +500 mV		Yes
в—Џ Input resistance (-500 mV to +500 mV)		10 Mв„¦
в—Џ -80 mV to +80 mV		Yes
в—Џ Input resistance (-80 mV to +80 mV)		10 Mв„¦
Input ranges (rated values), currents
в—Џ 0 to 20 mA	Yes	Yes
в—Џ Input resistance (0 to 20 mA)	41 в„¦; Plus approx. 42 ohms for overvoltage protection by PTC	25 в„¦; Plus approx. 42 ohms for overvoltage protection by PTC
в—Џ -20 mA to +20 mA	Yes	Yes
в—Џ Input resistance (-20 mA to +20 mA)	41 в„¦; Plus approx. 42 ohms for overvoltage protection by PTC	25 в„¦; Plus approx. 42 ohms for overvoltage protection by PTC
в—Џ 4 mA to 20 mA	Yes	Yes
в—Џ Input resistance (4 mA to 20 mA)	41 в„¦; Plus approx. 42 ohms for overvoltage protection by PTC	25 в„¦; Plus approx. 42 ohms for overvoltage protection by PTC
Input ranges (rated values), thermocouples
в—Џ Type B		Yes
в—Џ Input resistance (Type B)		10 Mв„¦
в—Џ Type E		Yes
в—Џ Input resistance (Type E)		10 Mв„¦
в—Џ Type J		Yes
в—Џ Input resistance (type J)		10 Mв„¦
в—Џ Type K		Yes
в—Џ Input resistance (Type K)		10 Mв„¦
в—Џ Type N		Yes
в—Џ Input resistance (Type N)		10 Mв„¦
в—Џ Type R		Yes
в—Џ Input resistance (Type R)		10 Mв„¦
в—Џ Type S		Yes
в—Џ Input resistance (Type S)		10 Mв„¦
в—Џ Type T		Yes
в—Џ Input resistance (Type T)		10 Mв„¦
Input ranges (rated values), resistance thermometer
в—Џ Ni 100		Yes; Standard/climate
в—Џ Input resistance (Ni 100)		10 Mв„¦
в—Џ Ni 1000		Yes; Standard/climate
в—Џ Input resistance (Ni 1000)		10 Mв„¦
в—Џ LG-Ni 1000		Yes; Standard/climate
в—Џ Input resistance (LG-Ni 1000)		10 Mв„¦
в—Џ Pt 100		Yes; Standard/climate
в—Џ Input resistance (Pt 100)		10 Mв„¦
в—Џ Pt 1000		Yes; Standard/climate
в—Џ Input resistance (Pt 1000)		10 Mв„¦
в—Џ Pt 200		Yes; Standard/climate
в—Џ Input resistance (Pt 200)		10 Mв„¦
в—Џ Pt 500		Yes; Standard/climate
в—Џ Input resistance (Pt 500)		10 Mв„¦
Input ranges (rated values), resistors
в—Џ 0 to 150 ohms		Yes
в—Џ Input resistance (0 to 150 ohms)		10 Mв„¦
в—Џ 0 to 300 ohms		Yes
в—Џ Input resistance (0 to 300 ohms)		10 Mв„¦
в—Џ 0 to 600 ohms		Yes
в—Џ Input resistance (0 to 600 ohms)		10 Mв„¦
в—Џ 0 to 6000 ohms		Yes
в—Џ Input resistance (0 to 6000 ohms)		10 Mв„¦
в—Џ PTC		Yes
в—Џ Input resistance (PTC)		10 Mв„¦
Thermocouple (TC)
Temperature compensation
вЂ” external temperature compensation via RTD		Yes
вЂ” Compensation for 0 °C reference point temperature		Yes; fixed value can be set
Cable length
в—Џ shielded, max.	800 m	800 m; for U/I, 200 m for R/RTD, 50 m for TC
Analog value generation for the inputs
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.	16 bit	16 bit
в—Џ Integration time, parameterizable		Yes
в—Џ Integration time (ms)		2,5 / 16,67 / 20 / 100 ms
в—Џ Basic conversion time, including integration time (ms)		9 / 23 / 27 / 107 ms
вЂ” additional conversion time for wire-break monitoring		9 ms
вЂ” additional conversion time for resistance measurement		150 ohm, 300 ohm, 600 ohm, Pt100, Pt200, Ni100: 2 ms, 6000 ohm, Pt500, Pt1000, Ni1000, LG-Ni1000, PTC: 4 ms
в—Џ Interference voltage suppression for interference frequency f1 in Hz		400 / 60 / 50 / 10 Hz
в—Џ Basic execution time of the module (all channels released)	62.5 µs
Smoothing of measured values
в—Џ parameterizable	Yes	Yes
в—Џ Step: None	Yes	Yes
в—Џ Step: low	Yes	Yes
в—Џ Step: Medium	Yes	Yes
в—Џ Step: High	Yes	Yes
Encoder
Connection of signal encoders
в—Џ for voltage measurement	Yes	Yes
в—Џ for current measurement as 2-wire transducer	Yes	Yes
вЂ” Burden of 2-wire transmitter, max.	820 в„¦	820 в„¦
в—Џ for current measurement as 4-wire transducer	Yes	Yes
в—Џ for resistance measurement with two-wire connection		Yes; Only for PTC
в—Џ for resistance measurement with three-wire connection		Yes; All measuring ranges except PTC; internal compensation of the cable resistances
в—Џ for resistance measurement with four-wire connection		Yes; All measuring ranges except PTC
Errors/accuracies
Linearity error (relative to input range), (+/-)	0.02 %	0.02 %
Temperature error (relative to input range), (+/-)	0.005 %/K	0.005 %/K; With TC type T 0.02 ± % / K
Crosstalk between the inputs, min.	-60 dB
Crosstalk between the inputs, max.		-80 dB
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-)	0.02 %	0.02 %
Temperature error of internal compensation		±6 °C
Operational error limit in overall temperature range
в—Џ Voltage, relative to input range, (+/-)	0.3 %	0.3 %
в—Џ Current, relative to input range, (+/-)	0.3 %	0.3 %
в—Џ Resistance, relative to input range, (+/-)		0.3 %
в—Џ Resistance thermometer, relative to input range, (+/-)		Ptxxx standard: ±1.5 K, Ptxxx climate: ±0.5 K, Nixxx standard: ±0.5 K, Nixxx climate: ±0.3 K
в—Џ Thermocouple, relative to input range, (+/-)		Type B: > 600 °C ±4.6 K, type E: > -200 °C ±1.5 K, type J: > -210 °C ±1.9 K, type K: > -200 °C ±2.4 K, type N: > -200 °C ±2.9 K, type R: > 0 °C ±4.7 K, type S: > 0 °C ±4.6 K, type T: > -200 °C ±2.4 K
Basic error limit (operational limit at 25 °C)
в—Џ Voltage, relative to input range, (+/-)	0.2 %	0.1 %
в—Џ Current, relative to input range, (+/-)	0.2 %	0.1 %
в—Џ Resistance, relative to input range, (+/-)		0.1 %
в—Џ Resistance thermometer, relative to input range, (+/-)		Ptxxx standard: ±0.7 K, Ptxxx climate: ±0.2 K, Nixxx standard: ±0.3 K, Nixxx climate: ±0.15 K
в—Џ Thermocouple, relative to input range, (+/-)		Type B: > 600 °C ±1.7 K, type E: > -200 °C ±0.7 K, type J: > -210 °C ±0.8 K, type K: > -200 °C ±1.2 K, type N: > -200 °C ±1.2 K, type R: > 0 °C ±1.9 K, type S: > 0 °C ±1.9 K, type T: > -200 °C ±0.8 K
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
в—Џ Series mode interference (peak value of interference < rated value of input range), min.		40 dB
в—Џ Common mode voltage, max.	10 V	10 V
в—Џ Common mode interference, min.	60 dB; at 400 Hz: 50 dB	60 dB
Isochronous mode
Isochronous operation (application synchronized up to terminal)	Yes
Filtering and processing time (TCI), min.	80 µs
Bus cycle time (TDP), min.	250 µs
Jitter, max.	1 µs
Interrupts/diagnostics/status information
Diagnostics function	Yes	Yes
Alarms
в—Џ Diagnostic alarm	Yes	Yes
в—Џ Limit value alarm	Yes; two upper and two lower limit values in each case	Yes; two upper and two lower limit values in each case
Diagnostic messages
в—Џ Monitoring the supply voltage	Yes	Yes
в—Џ Wire-break	Yes; only for 1 ... 5 V and 4 ... 20 mA	Yes; Only for 1 to 5 V, 4 to 20 mA, TC, R, and RTD
в—Џ Overflow/underflow	Yes	Yes
Diagnostics indication LED
в—Џ RUN LED		Yes; Green LED
в—Џ ERROR LED		Yes; Red LED
в—Џ Monitoring of the supply voltage (PWR-LED)	Yes; Green LED	Yes; Green LED
в—Џ Channel status display	Yes; Green LED	Yes; Green LED
в—Џ for channel diagnostics	Yes; Red LED	Yes; Red LED
в—Џ for module diagnostics	Yes; Red LED	Yes; Red LED
Potential separation
Potential separation channels
в—Џ between the channels	No	No
в—Џ between the channels, in groups of		8
в—Џ between the channels and backplane bus	Yes	Yes
в—Џ between the channels and the power supply of the electronics	Yes	Yes
Permissible potential difference
between the inputs (UCM)	20 V DC	20 V DC
Between the inputs and MANA (UCM)	10 V DC	10 V DC
between M internally and the inputs	75 V DC/60 V AC	75 V DC/60 V AC (base isolation)
Isolation
Isolation tested with	707 V DC	707 V DC (type test)
Ambient conditions
Ambient temperature during operation
в—Џ horizontal installation, min.	-40 °C; = Tmin; Startup @ -25 °C	-40 °C; = Tmin; Startup @ -25 °C
в—Џ horizontal installation, max.	70 °C; = Tmax; > +60 °C max. 4x ±20 mA or 4x ±10 V permissible	70 °C; = Tmax; > +60 °C max. 2x ±20 mA or 4x ±10 V or 4x RTD permissible
в—Џ vertical installation, min.	-40 °C; = Tmin; Startup @ -25 °C	-40 °C; = Tmin; Startup @ -25 °C
в—Џ vertical installation, max.	40 °C; = Tmax	50 °C; = Tmax
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Decentralized operation
Fast Startup supported		No
Dimensions
Width	35 mm	35 mm
Height	147 mm	147 mm
Depth	129 mm	129 mm
Weights
Weight, approx.		310 g
Other
Note:		Additional basic error and noise for integration time = 2.5 ms: Voltage: ±250 mV (±0.02%), ±80 mV (±0.05%), ±50 mV (±0.05%); resistance: 150 ohms ±0.02%; resistance thermometer: Pt100 climate: ±0.08 K, Ni100 climate: ±0.08 K; thermocouple: Type B, R, S: ±3 K, type E, J, K, N, T: ±1 K

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания