SIPLUS SM 532 analog output modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS SM 532 analog output modules

| | | | | |

Article number	6AG1532-5HD00-7AB0	6AG1532-5HF00-7AB0
	SIPLUS S7-1500 AQ 4XU/I ST	SIPLUS S7-1500 AQ 8XU/I HS
General information
Product type designation	AQ 4xU/I ST	AQ 8xU/I HS
HW functional status	E01
Firmware version	V1.0.0
Product function
в—Џ I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
Engineering with
в—Џ STEP 7 TIA Portal configurable/integrated as of version	V12 / V12
в—Џ STEP 7 configurable/integrated as of version	V5.5 SP3 / -
CiR – Configuration in RUN
Reparameterization possible in RUN		Yes
Calibration possible in RUN		Yes
Supply voltage
Rated value (DC)	24 V	24 V
permissible range, lower limit (DC)	20.4 V	20.4 V
permissible range, upper limit (DC)	28.8 V	28.8 V
Reverse polarity protection	Yes
Input current
Current consumption, max.	190 mA; with 24 V DC supply	260 mA; with 24 V DC supply
Power
Power available from the backplane bus	0.6 W	1.15 W
Power loss
Power loss, typ.	4 W	7 W
Analog outputs
Number of analog outputs	4; > +60 °C max. 4x ±10 V permissible	8; > +60 °C max. 4x ±10 V permissible
Voltage output, short-circuit protection	Yes	Yes
Voltage output, short-circuit current, max.	24 mA	45 mA
Current output, no-load voltage, max.	22 V	20 V
Cycle time (all channels), min.	3.2 ms; independent of number of activated channels	125 µs; independent of number of activated channels
Output ranges, voltage
в—Џ 0 to 10 V	Yes	Yes
в—Џ 1 V to 5 V	Yes	Yes
в—Џ -10 V to +10 V	Yes	Yes
Output ranges, current
в—Џ 0 to 20 mA	Yes	Yes
в—Џ -20 mA to +20 mA	Yes	Yes
в—Џ 4 mA to 20 mA	Yes	Yes
Connection of actuators
в—Џ for voltage output two-wire connection	Yes	Yes
в—Џ for voltage output four-wire connection	Yes	Yes
в—Џ for current output two-wire connection	Yes	Yes
Load impedance (in rated range of output)
в—Џ with voltage outputs, min.	1 kв„¦; 0.5 kOhm at 1 to 5 V	1 kв„¦
в—Џ with voltage outputs, capacitive load, max.	1 µF	100 nF
в—Џ with current outputs, max.	750 в„¦	500 в„¦
в—Џ with current outputs, inductive load, max.	10 mH	1 mH
Cable length
в—Џ shielded, max.	800 m; for current, 200 m for voltage
Analog value generation for the outputs
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.	16 bit	16 bit
в—Џ Conversion time (per channel)	0.5 ms	50 µs
в—Џ Basic execution time of the module (all channels released)		125 µs
Settling time
в—Џ for resistive load	1.5 ms	30 µs; see additional description in the manual
в—Џ for capacitive load	2.5 ms	100 µs; see additional description in the manual
в—Џ for inductive load	2.5 ms	100 µs; see additional description in the manual
Errors/accuracies
Output ripple (relative to output range, bandwidth 0 to 50 kHz), (+/-)	0.02 %	0.02 %
Linearity error (relative to output range), (+/-)	0.15 %	0.15 %
Temperature error (relative to output range), (+/-)	0.002 %/K	0.002 %/K
Crosstalk between the outputs, max.	-100 dB	-100 dB
Repeat accuracy in steady state at 25 °C (relative to output range), (+/-)	0.05 %	0.05 %
Operational error limit in overall temperature range
в—Џ Voltage, relative to output range, (+/-)	0.3 %	0.4 %
в—Џ Current, relative to output range, (+/-)	0.3 %	0.4 %
Basic error limit (operational limit at 25 °C)
в—Џ Voltage, relative to output range, (+/-)	0.2 %	0.2 %
в—Џ Current, relative to output range, (+/-)	0.2 %	0.2 %
Isochronous mode
Isochronous operation (application synchronized up to terminal)		Yes
Execution and activation time (TCO), min.		100 µs
Bus cycle time (TDP), min.		250 µs
Interrupts/diagnostics/status information
Diagnostics function	Yes	Yes
Substitute values connectable	Yes	Yes
Alarms
в—Џ Diagnostic alarm	Yes	Yes
Diagnostic messages
в—Џ Monitoring the supply voltage	Yes	Yes
в—Џ Wire-break	Yes; Only for output type "current"	Yes; Only for output type "current"
в—Џ Short-circuit	Yes; Only for output type "voltage"	Yes; Only for output type "voltage"
в—Џ Overflow/underflow	Yes	Yes
Diagnostics indication LED
в—Џ RUN LED	Yes; Green LED	Yes; Green LED
в—Џ ERROR LED	Yes; Red LED	Yes; Red LED
в—Џ Monitoring of the supply voltage (PWR-LED)	Yes; Green LED	Yes; Green LED
в—Џ Channel status display	Yes; Green LED	Yes; Green LED
в—Џ for channel diagnostics	Yes; Red LED	Yes; Red LED
в—Џ for module diagnostics	Yes; Red LED	Yes; Red LED
Potential separation
Potential separation channels
в—Џ between the channels	No	No
в—Џ between the channels, in groups of	4
в—Џ between the channels and backplane bus	Yes	Yes
в—Џ Between the channels and load voltage L+	Yes	Yes
Permissible potential difference
between MANA and M internally (UISO)	75 V DC/60 V AC (base isolation)	75 V DC/60 V AC
between S- and MANA (UCM)	±8 V	±8 V
Isolation
Isolation tested with	707 V DC (type test)	707 V DC (type test)
Ambient conditions
Ambient temperature during operation
в—Џ horizontal installation, min.	-25 °C; = Tmin	-40 °C; = Tmin; Startup @ -25 °C
в—Џ horizontal installation, max.	70 °C; = Tmax; > +60 °C max. 4x ±10 V permissible	70 °C; = Tmax; > +60 °C max. 4x ±10 V permissible
в—Џ vertical installation, min.	-25 °C; = Tmin	-40 °C; = Tmin; Startup @ -25 °C
в—Џ vertical installation, max.	40 °C; = Tmax	40 °C; = Tmax
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Decentralized operation
Fast Startup supported	Yes; 500 ms	Yes; 500 ms
Dimensions
Width	35 mm	35 mm
Height	147 mm	147 mm
Depth	129 mm	129 mm
Weights
Weight, approx.	310 g	325 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания