SIPLUS SM 522 digital output modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS SM 522 digital output modules

| | | | | |

Article number	6AG1522-1BF00-7AB0	6AG1522-1BH01-7AB0	6AG1522-1BL01-7AB0	6AG1522-5HF00-2AB0	6AG1522-5FF00-7AB0
	SIPLUS S7-1500 DQ 8X24VDC/2A HF	SIPLUS S7-1500 DQ 16X24VDC/0.5A HF	SIPLUS S7-1500 DQ 32X24VDC/0.5A HF	SIPLUS S7-1500 DQ 8X230VAC/5A ST (RELAY)	SIPLUS S7-1500 DQ 8X230VAC/2A ST (TRIAC)
General information
Product type designation	DQ 8x24VDC/2A HF	DQ 16x24VDC/0.5A HF	DQ 32x24VDC/0.5A HF	DQ 8x230 V AC/5 A ST (relay)	DQ 8x230 V AC/2A ST (triac)
Firmware version
в—Џ FW update possible		Yes
Product function
в—Џ I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
Operating mode
в—Џ DQ		Yes	Yes
в—Џ DQ with energy-saving function		No
в—Џ PWM		No
в—Џ Oversampling		No
в—Џ MSO		Yes	Yes	Yes
Supply voltage
Rated value (DC)	24 V	24 V	24 V	24 V
permissible range, lower limit (DC)	20.4 V	20.4 V	20.4 V	20.4 V
permissible range, upper limit (DC)	28.8 V	28.8 V	28.8 V	28.8 V
Reverse polarity protection		Yes; through internal protection with 7 A per group	Yes; through internal protection with 7 A per group
Input current
Current consumption, max.	40 mA; 20 mA per group, no output is activated.	30 mA	60 mA	80 mA
Output voltage
Rated value (DC)		24 V	24 V
Rated value (AC)					120/230 V AC, 50/60 Hz
Power
Power available from the backplane bus	0.9 W	1.1 W	1.1 W	0.8 W	0.9 W
Power loss
Power loss, typ.	5.6 W	2 W	3.5 W	3 W	10.8 W
Digital outputs
Type of digital output	Transistor	Transistor	Transistor	Relays	Triac
Number of digital outputs	8; > +60 °C Number of simultaneously controllable outputs max. 8x 0.5 A, max. total current per group 2 A	16	32	8	8; > +60 °C number of simultaneously controllable outputs max. 8x 0.25 A, max. total current 2 A
Current-sourcing		Yes	Yes
Short-circuit protection	Yes	Yes; Clocked electronically	Yes; Clocked electronically
в—Џ Response threshold, typ.	3 A	1 A	1 A
Limitation of inductive shutdown voltage to	-17 V	L+ (-53 V)	L+ (-53 V)
Controlling a digital input		Yes	Yes	possible
Switching capacity of the outputs
в—Џ with resistive load, max.	2 A	0.5 A	0.5 A		2 A
в—Џ on lamp load, max.	10 W	5 W	5 W	1 500 W; 10 000 operating cycles	50 W
в—Џ Low energy/fluorescent lamps with electronic control gear				10x 58 W (25 000 operating cycles)
в—Џ Fluorescent tubes, conventionally compensated				1x 58 W (25 000 operating cycles)
в—Џ Fluorescent tubes, uncompensated				10x 58 W (25 000 operating cycles)
Load resistance range
в—Џ lower limit	12 в„¦	48 в„¦	48 в„¦
в—Џ upper limit	4 kв„¦	12 kв„¦	12 kв„¦
Output voltage
в—Џ for signal "1", min.	L+ (-0.8 V)	L+ (-0.8 V)	L+ (-0.8 V)		L1 (-1.5 V) at maximum output current; L1 (-8.5 V) at minimum output current
Output current
в—Џ for signal "1" rated value	2 A	0.5 A	0.5 A	5 A	2 A
в—Џ for signal "1" permissible range, min.				5 mA; 10 V	10 mA
в—Џ for signal "1" permissible range, max.	2.4 A	0.5 A	0.5 A	8 A; thermal continuous current	15 A; max. 1 AC cycle
в—Џ for signal "0" residual current, max.	0.5 mA	0.5 mA	0.5 mA	0 A	2 mA
Output delay with resistive load
в—Џ "0" to "1", max.	100 µs	100 µs	100 µs		1 AC cycle
в—Џ "1" to "0", max.	500 µs	500 µs	500 µs		1 AC cycle
Parallel switching of two outputs
в—Џ for logic links	Yes	Yes	Yes	Yes	No
в—Џ for uprating	No	No	No	No	No
в—Џ for redundant control of a load	Yes	Yes	Yes	Yes	Yes
Switching frequency
в—Џ with resistive load, max.	100 Hz	100 Hz	100 Hz	2 Hz	10 Hz
в—Џ with inductive load, max.	0.5 Hz; According to IEC 60947-5-1, DC-13	0.5 Hz; According to IEC 60947-5-1, DC-13	0.5 Hz; According to IEC 60947-5-1, DC-13	0.5 Hz	0.5 Hz
в—Џ on lamp load, max.	10 Hz	10 Hz	10 Hz	2 Hz	1 Hz
Total current of the outputs
в—Џ Current per channel, max.	2 A; Note derating data in the manual	0.5 A; see additional description in the manual	0.5 A; see additional description in the manual	8 A; Note derating data in the manual	2 A; = Tmax; > +60 °C number of simultaneously controllable outputs max. 8x 0.25 A, max. total current per group 2 A
в—Џ Current per group, max.	8 A; Note derating data in the manual	4 A; see additional description in the manual	4 A; see additional description in the manual	8 A; Note derating data in the manual	2 A; = Tmax; > +60 °C number of simultaneously controllable outputs max. 8x 0.25 A, max. total current per group 2 A
в—Џ Current per module, max.	16 A; Note derating data in the manual	8 A; see additional description in the manual	16 A; see additional description in the manual	64 A; Note derating data in the manual	10 A; = Tmax; > +60 °C number of simultaneously controllable outputs max. 8x 0.25 A, max. total current per group 2 A
Relay outputs
в—Џ Number of relay outputs				8
в—Џ Rated supply voltage of relay coil L+ (DC)				24 V
в—Џ Current consumption of relays (coil current of all relays), max.				80 mA
в—Џ external protection for relay outputs				With miniature circuit breaker with characteristic B for: cos П† 1.0: 600 A cos П† 0.5 ... 0.7: 900 A with 8 A Diazed fuse: 1000 A
в—Џ Contact connection (internal)				No
в—Џ Size of motor starters according to NEMA, max.				5	5
в—Џ Number of operating cycles, max.				4 000 000; see additional description in the manual
в—Џ Relay approved acc. to UL 508				Yes; 250 V AC/5 A g.p.; 120 V AC TV-4 tungsten; A300, R300
Switching capacity of contacts
вЂ” with inductive load, max.				see additional description in the manual
вЂ” with resistive load, max.				see additional description in the manual
Triac outputs
в—Џ Size of motor starters according to NEMA, max.					5
Cable length
в—Џ shielded, max.	1 000 m	1 000 m	1 000 m	1 000 m	1 000 m
в—Џ unshielded, max.	600 m	600 m	600 m	600 m	600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No	Yes	Yes	No	No
Execution and activation time (TCO), min.		70 µs	70 µs
Bus cycle time (TDP), min.		250 µs	250 µs
Interrupts/diagnostics/status information
Diagnostics function	Yes	Yes	Yes	Yes	No
Substitute values connectable	Yes	Yes	Yes	Yes	Yes
Alarms
в—Џ Diagnostic alarm	Yes	Yes	Yes	Yes	No
Diagnostic messages
в—Џ Monitoring the supply voltage	Yes	Yes	Yes	Yes	No
в—Џ Wire-break	No	Yes	Yes	No	No
в—Џ Short-circuit	Yes	Yes	Yes	No	No
в—Џ Group error		Yes	Yes
в—Џ Fuse blown	No				No
Diagnostics indication LED
в—Џ RUN LED	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED
в—Џ ERROR LED	Yes; Red LED	Yes; Red LED	Yes; Red LED	Yes; Red LED	Yes; Red LED
в—Џ Monitoring of the supply voltage (PWR-LED)	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED	No
в—Џ Channel status display	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED
в—Џ for channel diagnostics	Yes; Red LED	Yes; Red LED	Yes; Red LED	No	No
в—Џ for module diagnostics	Yes; Red LED	Yes; Red LED	Yes; Red LED	Yes; Red LED	Yes; Red LED
Potential separation
Potential separation channels
в—Џ between the channels	Yes	No	No	Yes; Switching of different phases permitted	Yes
в—Џ between the channels, in groups of	4	8	8	1	1
в—Џ between the channels and backplane bus	Yes	Yes	Yes	Yes	Yes
в—Џ Between the channels and load voltage L+				Yes
в—Џ Between the channels and load voltage L1					Yes
Permissible potential difference
between different circuits	75 V DC/60 V AC			75 V DC/60 V AC (base isolation) between backplane bus and the supply voltage L+; 250 V AC between the channels and the supply voltage L+; 250 V AC between the channels and the backplane bus; 500 V AC between the channels	250 V AC between the channels and the backplane bus; 500 V AC between the channels
Isolation
Isolation tested with	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)	Between the channels: 2 500 V DC; between the channels and backplane bus: 2 500 V DC; between L+ backplane bus 707 V DC (type test)	2500 V DC
Ambient conditions
Ambient temperature during operation
в—Џ horizontal installation, min.	-40 °C; = Tmin	-40 °C; = Tmin	-40 °C; = Tmin	-25 °C; = Tmin	-40 °C; = Tmin
в—Џ horizontal installation, max.	70 °C; = Tmax; > +60 °C Number of simultaneously controllable outputs max. 8x 0.5 A, max. total current per group 2 A	70 °C; = Tmax; see Derating BasedOn (e.g. manual), additionally Tmax > 60 °C max. aggregate current 2 A per group	70 °C; = Tmax; see Derating BasedOn (e.g. manual), additionally Tmax > 60 °C max. aggregate current 2 A per group	60 °C; = Tmax	70 °C; = Tmax; > +60 °C number of simultaneously controllable outputs max. 8x 0.25 A, max. total current 2 A
в—Џ vertical installation, min.	-40 °C; = Tmin			-25 °C; = Tmin	-40 °C; = Tmin
в—Џ vertical installation, max.	40 °C; = Tmax			40 °C; = Tmax	40 °C; = Tmax
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation	100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Decentralized operation
Fast Startup supported	Yes; 500 ms			Yes; 500 ms	Yes; 500 ms
Prioritized startup		Yes	Yes
Dimensions
Width	35 mm	35 mm	35 mm	35 mm	35 mm
Height	147 mm	147 mm	147 mm	147 mm	147 mm
Depth	129 mm	129 mm	129 mm	129 mm	129 mm
Weights
Weight, approx.	240 g	230 g	280 g	200 g	290 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания