SIPLUS CPU 1513-1 PN . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS CPU 1513-1 PN

| | | | | | | |

Article number	6AG1513-1AL01-2AB0	6AG1513-1AL01-7AB0
	SIPLUS S7-1500 CPU 1513-1 PN	SIPLUS S7-1500 CPU 1513-1 PN
General information
Product type designation	CPU 1513-1 PN	CPU 1513-1 PN
HW functional status		FS01
Firmware version		V1.8
Engineering with
в—Џ STEP 7 TIA Portal configurable/integrated as of version		V13 SP1 Update 4
Configuration control
via dataset		Yes
Display
Screen diagonal [cm]	3.45 cm	3.45 cm
Control elements
Number of keys	6	6
Mode selector switch	1	1
Supply voltage
Type of supply voltage	24 V DC	24 V DC
permissible range, lower limit (DC)	19.2 V	19.2 V
permissible range, upper limit (DC)	28.8 V	28.8 V
Reverse polarity protection		Yes
Mains buffering
в—Џ Mains/voltage failure stored energy time		5 ms
Input current
Current consumption (rated value)	0.7 A	0.7 A
Inrush current, max.	1.9 A; Rated value	1.9 A; Rated value
IІt	0.34 AІ·s	0.02 AІ·s
Power
Infeed power to the backplane bus	10 W	10 W
Power consumption from the backplane bus (balanced)	5.5 W	5.5 W
Power loss
Power loss, typ.	5.7 W	5.7 W
Memory
SIMATIC memory card required	Yes	Yes
Work memory
в—Џ integrated (for program)	300 kbyte	300 kbyte
в—Џ integrated (for data)	1.5 Mbyte	1.5 Mbyte
Load memory
в—Џ Plug-in (SIMATIC Memory Card), max.	2 Gbyte	32 Gbyte
Backup
в—Џ maintenance-free	Yes	Yes
CPU processing times
for bit operations, typ.	40 ns	40 ns
for word operations, typ.	48 ns	48 ns
for fixed point arithmetic, typ.	64 ns	64 ns
for floating point arithmetic, typ.	256 ns	256 ns
CPU-blocks
Number of blocks (total)	2 000
Number of elements (total)		2 000; In addition to blocks such as DBs, FBs and FCs, UDTs, global constants, etc. are also regarded as elements
DB
в—Џ Number range		1 ... 60 999; subdivided into: number range that can be used by the user: 1 ... 59 999, and number range of DBs created via SFC 86: 60 000 ... 60 999
в—Џ Number, max.	2 000; Number range: 1 to 65535
в—Џ Size, max.	1.5 Mbyte	1.5 Mbyte; For non-optimized block accesses, the max. size of the DB is 64 KB
FB
в—Џ Number range		0 ... 65 535
в—Џ Number, max.	1 998; Number range: 1 to 65535
в—Џ Size, max.	300 kbyte	300 kbyte
FC
в—Џ Number range		0 ... 65 535
в—Џ Number, max.	1 999; Number range: 1 to 65535
в—Џ Size, max.	300 kbyte	300 kbyte
OB
в—Џ Size, max.	300 kbyte	300 kbyte
в—Џ Number of free cycle OBs	100	100
в—Џ Number of time alarm OBs	20	20
в—Џ Number of delay alarm OBs	20	20
в—Џ Number of cyclic interrupt OBs	20	20
в—Џ Number of process alarm OBs	50	50
в—Џ Number of DPV1 alarm OBs	3	3
в—Џ Number of isochronous mode OBs	1	1
в—Џ Number of technology synchronous alarm OBs	2	2
в—Џ Number of startup OBs	100	100
в—Џ Number of asynchronous error OBs	4	4
в—Џ Number of synchronous error OBs	2	2
в—Џ Number of diagnostic alarm OBs	1	1
Nesting depth
в—Џ per priority class	24	24
Counters, timers and their retentivity
S7 counter
в—Џ Number	2 048	2 048
Retentivity
вЂ” adjustable	Yes	Yes
IEC counter
в—Џ Number	Any (only limited by the main memory)	Any (only limited by the main memory)
Retentivity
вЂ” adjustable	Yes	Yes
S7 times
в—Џ Number	2 048	2 048
Retentivity
вЂ” adjustable	Yes	Yes
IEC timer
в—Џ Number	Any (only limited by the main memory)	Any (only limited by the main memory)
Retentivity
вЂ” adjustable	Yes	Yes
Data areas and their retentivity
Retentive data area (incl. timers, counters, flags), max.	128 kbyte; Available retentive memory for bit memories, timers, counters, DBs, and technology data (axes): 88 KB	128 kbyte; In total; available retentive memory for bit memories, timers, counters, DBs, and technology data (axes): 88 KB
Flag
в—Џ Number, max.	16 kbyte	16 kbyte
в—Џ Number of clock memories	8; 8 clock memory bits, grouped into one clock memory byte	8; 8 clock memory bits, grouped into one clock memory byte
Data blocks
в—Џ Retentivity adjustable	Yes	Yes
в—Џ Retentivity preset	No	No
Local data
в—Џ per priority class, max.	64 kbyte; max. 16 KB per block	64 kbyte; max. 16 KB per block
Address area
Number of IO modules	2 048	2 048; max. number of modules / submodules
I/O address area
в—Џ Inputs	32 kbyte; All inputs are in the process image	32 kbyte; All inputs are in the process image
в—Џ Outputs	32 kbyte; All outputs are in the process image	32 kbyte; All outputs are in the process image
per integrated IO subsystem
вЂ” Inputs (volume)	8 kbyte	8 kbyte
вЂ” Outputs (volume)	8 kbyte	8 kbyte
per CM/CP
вЂ” Inputs (volume)	8 kbyte	8 kbyte
вЂ” Outputs (volume)	8 kbyte	8 kbyte
Subprocess images
в—Џ Number of subprocess images, max.	32	32
Hardware configuration
Number of distributed IO systems	7	20
Number of DP masters
в—Џ Via CM	6; A maximum of 6 CMs (PROFINET + PROFIBUS) can be inserted in total	6; A maximum of 6 CMs (PROFINET + PROFIBUS) can be inserted in total
Number of IO Controllers
в—Џ integrated	1	1
в—Џ Via CM		6; A maximum of 6 CMs (PROFINET + PROFIBUS) can be inserted in total
Rack
в—Џ Modules per rack, max.	32; CPU + 31 modules	32; CPU + 31 modules
в—Џ Number of lines, max.	1	1
PtP CM
в—Џ Number of PtP CMs	the number of connectable PtP CMs is only limited by the number of available slots	the number of connectable PtP CMs is only limited by the number of available slots
Time of day
Clock
в—Џ Type	Hardware clock	Hardware clock
в—Џ Backup time	6 wk; At 40 °C ambient temperature, typically	6 wk; At 40 °C ambient temperature, typically
в—Џ Deviation per day, max.	10 s; Typ.: 2 s	10 s; Typ.: 2 s
Operating hours counter
в—Џ Number		16
Clock synchronization
в—Џ supported	Yes	Yes
в—Џ in AS, master	Yes	Yes
в—Џ in AS, slave	Yes	Yes
в—Џ on Ethernet via NTP	Yes	Yes
Interfaces
Number of PROFINET interfaces	1	1
1. Interface
Interface types
в—Џ Number of ports	2	2
в—Џ integrated switch	Yes	Yes
в—Џ RJ 45 (Ethernet)	Yes	Yes; X1
Functionality
в—Џ PROFINET IO Controller	Yes	Yes
в—Џ PROFINET IO Device	Yes	Yes
в—Џ SIMATIC communication	Yes	Yes
в—Џ Open IE communication	Yes	Yes
в—Џ Web server	Yes	Yes
в—Џ Media redundancy	Yes	Yes
Interface types
RJ 45 (Ethernet)
в—Џ 100 Mbps	Yes	Yes
в—Џ Autonegotiation	Yes	Yes
в—Џ Autocrossing	Yes	Yes
в—Џ Industrial Ethernet status LED	Yes	Yes
Protocols
Number of connections
в—Џ Number of connections, max.	128	128; via integrated interfaces of the CPU and connected CPs / CMs
в—Џ Number of connections reserved for ES/HMI/web	10	10
в—Џ Number of connections via integrated interfaces	88	88
в—Џ Number of S7 routing paths		16
PROFINET IO Controller
Services
вЂ” PG/OP communication	Yes	Yes
вЂ” S7 routing	Yes	Yes
вЂ” Isochronous mode	Yes	Yes
вЂ” Open IE communication	Yes	Yes
вЂ” IRT	Yes	Yes
вЂ” MRP	Yes; As MRP redundancy manager and/or MRP client; max. number of devices in the ring: 50	Yes; As MRP redundancy manager and/or MRP client; max. number of devices in the ring: 50
вЂ” PROFIenergy		Yes
вЂ” Prioritized startup	Yes; Max. 32 PROFINET devices	Yes; Max. 32 PROFINET devices
вЂ” Number of connectable IO Devices, max.	256; a maximum of 256 (PROFIBUS slaves + PROFINET devices) can be connected in total	128; In total, up to 256 distributed I/O devices can be connected via PROFIBUS or PROFINET
вЂ” Of which IO devices with IRT, max.	64	64
вЂ” Number of connectable IO Devices for RT, max.	256	128
вЂ” of which in line, max.	128	128
вЂ” Number of IO Devices that can be simultaneously activated/deactivated, max.	8	8
вЂ” Number of IO Devices per tool, max.	8	8
вЂ” Updating times	The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data	The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data
Update time for IRT
вЂ” for send cycle of 250 µs	250 µs to 4 ms	250 Ојs to 4 ms; Note: In the case of IRT with isochronous mode, the minimum update time of 500 µs of the isochronous OB is decisive
вЂ” for send cycle of 500 µs	500 µs to 8 ms	500 µs to 8 ms
вЂ” for send cycle of 1 ms	1 ms to 16 ms	1 ms to 16 ms
вЂ” for send cycle of 2 ms	2 ms to 32 ms	2 ms to 32 ms
вЂ” for send cycle of 4 ms	4 ms to 64 ms	4 ms to 64 ms
вЂ” With IRT and parameterization of "odd" send cycles	Update time = set "odd" send clock (any multiple of 125 µs: 375 µs, 625 µs ... 3 875 µs)	Update time = set "odd" send clock (any multiple of 125 µs: 375 µs, 625 µs ... 3 875 µs)
Update time for RT
вЂ” for send cycle of 250 µs	250 µs to 128 ms	250 µs to 128 ms
вЂ” for send cycle of 500 µs	500 µs to 256 ms	500 µs to 256 ms
вЂ” for send cycle of 1 ms	1 ms to 512 ms	1 ms to 512 ms
вЂ” for send cycle of 2 ms	2 ms to 512 ms	2 ms to 512 ms
вЂ” for send cycle of 4 ms	4 ms to 512 ms	4 ms to 512 ms
PROFINET IO Device
Services
вЂ” PG/OP communication	Yes	Yes
вЂ” S7 routing	Yes	Yes
вЂ” Isochronous mode	Yes	No
вЂ” Open IE communication	Yes	Yes
вЂ” IRT	Yes	Yes
вЂ” MRP	Yes	Yes
вЂ” PROFIenergy	Yes	Yes
вЂ” Shared device		Yes
вЂ” Number of IO Controllers with shared device, max.		4
SIMATIC communication
в—Џ S7 communication, as server	Yes	Yes
в—Џ S7 communication, as client	Yes	Yes
в—Џ User data per job, max.	BSEND/BRCV: 64 KB; PUT/GET: 960 bytes	See online help (S7 communication, user data size)
Open IE communication
в—Џ TCP/IP	Yes	Yes
вЂ” Data length, max.	8 kbyte	64 kbyte
вЂ” several passive connections per port, supported		Yes
в—Џ ISO-on-TCP (RFC1006)	Yes	Yes
вЂ” Data length, max.	8 kbyte	64 kbyte
в—Џ UDP	Yes	Yes
вЂ” Data length, max.	1 472 byte	1 472 byte
в—Џ DHCP	No	No
в—Џ SNMP	Yes	Yes
в—Џ DCP	Yes	Yes
в—Џ LLDP	Yes	Yes
Web server
в—Џ HTTP	Yes; Standard and user-defined pages	Yes; Standard and user-defined pages
в—Џ HTTPS	Yes; Standard and user-defined pages	Yes; Standard and user-defined pages
Further protocols
в—Џ MODBUS	Yes; MODBUS TCP	Yes; MODBUS TCP
Media redundancy
в—Џ Switchover time on line break, typ.	200 ms	200 ms
в—Џ Number of stations in the ring, max.	50	50
Isochronous mode
Isochronous operation (application synchronized up to terminal)	Yes	Yes; With minimum OB 6x cycle of 625 µs
Equidistance	Yes	Yes
S7 message functions
Number of login stations for message functions, max.	32	32
Program alarms	Yes	Yes
Number of configurable program alarms	5 000	5 000
Number of simultaneously active program alarms	500
в—Џ Number of program alarms		300
в—Џ Number of alarms for system diagnostics		100
в—Џ Number of alarms for motion technology objects		80
Test commissioning functions
Joint commission (Team Engineering)		Yes; Parallel online access possible for up to 5 engineering systems
Status block	Yes; Up to 16 simultaneously	Yes; Up to 8 simultaneously (in total across all ES clients)
Single step	No	No
Status/control
в—Џ Status/control variable	Yes	Yes
в—Џ Variables	Inputs, outputs, memory bits, DB, times, counters	Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters
в—Џ Number of variables, max.
вЂ” of which status variables, max.	200	200; per job
вЂ” of which control variables, max.	200	200; per job
Forcing
в—Џ Forcing, variables	Inputs, outputs	Peripheral inputs/outputs
в—Џ Number of variables, max.	1 000	200
Diagnostic buffer
в—Џ present	Yes	Yes
в—Џ Number of entries, max.		1 000
вЂ” of which powerfail-proof	250	500
Traces
в—Џ Number of configurable Traces		4; Up to 512 KB of data per trace are possible
Interrupts/diagnostics/status information
Diagnostics indication LED
в—Џ RUN/STOP LED	Yes	Yes
в—Џ ERROR LED	Yes	Yes
в—Џ MAINT LED	Yes	Yes
в—Џ Connection display LINK TX/RX	Yes	Yes
Supported technology objects
Motion Control	Yes	Yes
в—Џ Speed-controlled axis
вЂ” Number of speed-controlled axes, max.	6; Up to 6 axes in total (speed-controlled, positioning axis, external encoders) are supported	6; Requirement: There must be no other motion technology objects created; note: The number of axes affects the cycle time of the PLC program; selection guide via the TIA Selection Tool
в—Џ Positioning axis
вЂ” Number of positioning axes, max.	6; Up to 6 axes in total (speed-controlled, positioning axis, external encoders) are supported	6; Requirement: There must be no other motion technology objects created; note: The number of axes affects the cycle time of the PLC program; selection guide via the TIA Selection Tool
в—Џ Synchronized axes (relative gear synchronization)
вЂ” Number of axes, max.		3; Requirement: There must be no other motion technology objects created; note: The number of axes affects the cycle time of the PLC program; selection guide via the TIA Selection Tool
в—Џ External encoders
вЂ” Number of external encoders, max.	6; Up to 6 axes in total (speed-controlled, positioning axis, external encoders) are supported	6; Requirement: There must be no other motion technology objects created; note: The number of axes affects the cycle time of the PLC program; selection guide via the TIA Selection Tool
Controller
в—Џ PID_Compact	Yes; Universal PID controller with integrated optimization	Yes; Universal PID controller with integrated optimization
в—Џ PID_3Step	Yes; PID controller with integrated optimization for valves	Yes; PID controller with integrated optimization for valves
в—Џ PID-Temp		Yes; PID controller with integrated optimization for temperature
Counting and measuring
в—Џ High-speed counter	Yes	Yes
Ambient conditions
Ambient temperature during operation
в—Џ horizontal installation, min.	-40 °C; = Tmin; Startup @ -20 °C	-40 °C; = Tmin; Startup @ -20 °C
в—Џ horizontal installation, max.	60 °C; Display: 50 °C, at an operating temperature of typically 50 °C, the display is switched off	70 °C; Display: 50 °C, at an operating temperature of typically 50 °C, the display is switched off
в—Џ vertical installation, min.	-40 °C; = Tmin; Startup @ -20 °C	-40 °C; = Tmin; Startup @ -20 °C
в—Џ vertical installation, max.	40 °C; Display: 40 °C, at an operating temperature of typically 40 °C, the display is switched off	40 °C; Display: 40 °C, at an operating temperature of typically 40 °C, the display is switched off
Ambient temperature during storage/transportation
в—Џ min.	-40 °C	-40 °C
в—Џ max.	70 °C	70 °C
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation	100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Configuration
Programming
Programming language
вЂ” LAD	Yes	Yes
вЂ” FBD	Yes	Yes
вЂ” STL	Yes	Yes
вЂ” SCL	Yes	Yes
вЂ” GRAPH	Yes; As of STEP 7 V12 SP1	Yes
Know-how protection
в—Џ User program protection/password protection	Yes	Yes
в—Џ Copy protection	Yes	Yes
в—Џ Block protection	Yes	Yes
Access protection
в—Џ Password for display	Yes	Yes
в—Џ Protection level: Write protection	Yes	Yes
в—Џ Protection level: Read/write protection	Yes	Yes
в—Џ Protection level: Complete protection	Yes	Yes
Cycle time monitoring
в—Џ lower limit	adjustable minimum cycle time	adjustable minimum cycle time
в—Џ upper limit	adjustable maximum cycle time	adjustable maximum cycle time
Dimensions
Width	35 mm	70 mm
Height	147 mm	147 mm
Depth	129 mm	129 mm
Weights
Weight, approx.	430 g	615 g
Other
Note:	At temperatures below 0 °C legibility may be restricted and representation of dynamic contents may be slower	At temperatures below 0 °C legibility may be restricted and representation of dynamic contents may be slower

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания