CP 5614 A3 . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на CP 5614 A3

| | | | | | | | |

Article number		6GK1561-4AA02
Product type designation		CP 5614 A3
Transmission rate
Transfer rate
в—Џ at the 1st interface acc. to PROFIBUS		9.6 kbit/s ... 12 Mbit/s
в—Џ at the 2nd interface acc. to PROFIBUS		9.6 kbit/s ... 12 Mbit/s
Interfaces
Number of electrical connections
в—Џ at the 1st interface acc. to PROFIBUS		1
в—Џ at the 2nd interface acc. to PROFIBUS		1
Type of electrical connection
в—Џ at the 1st interface acc. to PROFIBUS		9-pin Sub-D socket (RS 485)
в—Џ at the 2nd interface acc. to PROFIBUS		9-pin Sub-D socket (RS 485)
Supply voltage, current consumption, power loss
Type of voltage of the supply voltage		DC
Supply voltage
в—Џ 1 from backplane bus		3.3 V
в—Џ 2 from backplane bus		12 V
Relative symmetrical tolerance at DC
в—Џ at 3.3 V		9 %
в—Џ at 12 V		8 %
Consumed current
в—Џ 1 from backplane bus at DC maximum		0.15 A
в—Џ 2 from backplane bus at DC maximum		0.3 A
Power loss [W]		4 W
Permitted ambient conditions
Ambient temperature
в—Џ during operation		5 ... 55 °C
в—Џ during storage		-20 ... +60 °C
в—Џ during transport		-20 ... +60 °C
Relative humidity at 25 °C without condensation during operation maximum		85 %
Protection class IP		IP00
Design, dimensions and weight
Module format		PCI
Width		18 mm
Height		107 mm
Depth		125 mm
Net weight		118 g
Number of plug-in cards of same design plug-in per PC station		4
Number of units Note		-
Performance data
Performance data open communication
Software for open communication by means of SEND/RECEIVE required		FDL driver included in scope of delivery of the CP
Number of possible connections for open communication by means of SEND/RECEIVE maximum		80
Performance data PROFIBUS DP
Software for DP master function required		No
Service as DP master
в—Џ DPV0		Yes
в—Џ DPV1		Yes
в—Џ DPV2		Yes
Number of DP slaves on DP master usable		124
Amount of data
в—Џ of the address area of the inputs as DP master total		30 256 byte
в—Џ of the address area of the outputs as DP master total		30 256 byte
в—Џ of the address area of the inputs per DP slave		244 byte
в—Џ of the address area of the outputs per DP slave		244 byte
в—Џ of the address area of the diagnostic data per DP slave		244 byte
Software for DP slave function required		No
Service as DP slave
в—Џ DPV0		Yes
в—Џ DPV1		Yes
Amount of data
в—Џ of the address area of the inputs as DP slave total		244 byte
в—Џ of the address area of the outputs as DP slave total		244 byte
Performance data S7 communication
Software for S7 communication required		Yes, HARDNET-PB S7 (S7-5613)
Number of possible connections for S7/PG communication maximum		50
Performance data multi-protocol mode
Number of active connections with multi-protocol mode		50
Number of configurable connections per PC station		207
Product functions management, configuration
Configuration software required		Included in scope of supply
Product functions Diagnosis
Product function
в—Џ Port diagnostics		Yes
Standards, specifications, approvals
Standard
в—Џ for EMC		89/336/EEC
в—Џ for safety from CSA and UL		CAN/CSA C22.2 & UL 60950-1, UL 1950
в—Џ for emitted interference		EN 61000-6-3
в—Џ for interference immunity		EN 61000-6-2
Certificate of suitability
в—Џ CE marking		Yes
в—Џ C-Tick		Yes