Siemens
01 2018
(4872) 700-366
skenergo@mail.ru
 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 |  |  |  |  
 01 2017  01 2016  01 2015  01 2014  
Overview | Application | Design | Function | Technical specifications  | Ordering data | Accessories/ordering data |

Article number

6ES7317-7UL10-0AB0

CPU317TF-3 PN/DP, 1,5 MB

General information

HW functional status

01

Firmware version

CPU: V3.2; integrated technology V4.1.5

Engineering with

  • ● Programming package

STEP 7 V5.5 SP2 or higher; S7-Technology option package V4.2 SP3 or higher, Distributed Safety V5.4 SP5 or higher, S7-F Configuration Pack V5.5 SP10 or higher

Supply voltage

Rated value (DC)

  • ● 24 V DC

Yes

permissible range, lower limit (DC)

19.2V

permissible range, upper limit (DC)

28.8V

external protection for power supply lines (recommendation)

2 A min.

Load voltage L+

  • ● Rated value (DC)

24V

  • ● Reverse polarity protection

Yes

Digital outputs

  • — Rated value (DC)

24V; 2L+

  • — Reverse polarity protection

No; 2L+

Input current

Current consumption (rated value)

1100mA

Current consumption (in no-load operation), typ.

270mA

Inrush current, typ.

6.5A

It

1As

Power loss

Power loss, typ.

8.5W

Memory

Work memory

  • ● integrated

1536kbyte

  • ● expandable

No

  • ● Size of retentive memory for retentive data blocks

256kbyte

Load memory

  • ● Plug-in (MMC)

Yes

  • ● Plug-in (MMC), max.

8Mbyte

  • ● Data management on MMC (after last programming), min.

10y

Backup

  • ● present

Yes; Guaranteed by MMC (maintenance-free)

  • ● without battery

Yes; Program and data

CPU processing times

for bit operations, typ.

0.025s

for word operations, typ.

0.03s

for fixed point arithmetic, typ.

0.04s

for floating point arithmetic, typ.

0.16s

CPU-blocks

Number of blocks (total)

2048; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used.

DB

  • ● Number, max.

2048; Number range: 1 to 16000

  • ● Size, max.

64kbyte

FB

  • ● Number, max.

2048; Number range: 0 to 7999

  • ● Size, max.

64kbyte

FC

  • ● Number, max.

2048; Number range: 0 to 7999

  • ● Size, max.

64kbyte

OB

  • ● Description

see instruction list

  • ● Size, max.

64kbyte

  • ● Number of free cycle OBs

1; OB 1

  • ● Number of time alarm OBs

1; OB 10

  • ● Number of delay alarm OBs

2; OB 20, 21

  • ● Number of cyclic interrupt OBs

4; OB 32, 33, 34, 35

  • ● Number of process alarm OBs

1; OB 40

  • ● Number of DPV1 alarm OBs

3; OB 55, 56, 57

  • ● Number of isochronous mode OBs

1; OB 61 - isochronous mode is possible either on DP or PROFINET IO (not simultaneously)

  • ● Number of technology synchronous alarm OBs

1; OB 65

  • ● Number of startup OBs

1; OB 100

  • ● Number of asynchronous error OBs

6; OB 80, 82, 83, 85, 86, 87 (OB83 only for PROFINET IO)

  • ● Number of synchronous error OBs

2; OB 121, 122

Nesting depth

  • ● per priority class

16

  • ● additional within an error OB

4

Counters, timers and their retentivity

S7 counter

  • ● Number

512

Retentivity

  • — adjustable

Yes

  • — lower limit

0

  • — upper limit

511

  • — preset

Z 0 to Z 7

Counting range

  • — can be set

Yes

  • — lower limit

0

  • — upper limit

999

IEC counter

  • ● Number

Unlimited (limited only by RAM capacity)

S7 times

  • ● Number

512

Retentivity

  • — adjustable

Yes

  • — lower limit

0

  • — upper limit

511

  • — preset

No retentivity

Time range

  • — lower limit

10ms

  • — upper limit

9990s

IEC timer

  • ● present

Yes

  • ● Type

SFB

  • ● Number

Unlimited (limited only by RAM capacity)

Data areas and their retentivity

retentive data area in total

All, max. 256 KB

Flag

  • ● Number, max.

4096byte

  • ● Retentivity available

Yes; From MB 0 to MB 4095

  • ● Retentivity preset

MB 0 to MB 15

  • ● Number of clock memories

8; 1 memory byte

Data blocks

  • ● Retentivity adjustable

Yes; via non-retain property on DB

  • ● Retentivity preset

Yes

Local data

  • ● per priority class, max.

32768byte; Max. 2048 bytes per block

Address area

I/O address area

  • ● Inputs

8192byte

  • ● Outputs

8192byte

of which distributed

  • — Inputs

8192byte

  • — Outputs

8192byte

Process image

  • ● Inputs

8192byte

  • ● Outputs

8192byte

  • ● Inputs, adjustable

8192byte

  • ● Outputs, adjustable

8192byte

  • ● Inputs, default

1024byte

  • ● Outputs, default

1024byte

Default addresses of the integrated channels

  • — Digital inputs

66

  • — Digital outputs

66

Subprocess images

  • ● Number of subprocess images, max.

1; With PROFINET IO, the length of the user data is limited to 1600 bytes

Digital channels

  • ● Inputs

65536

  • — of which central

256

  • ● Outputs

65536

  • — of which central

256

Analog channels

  • ● Inputs

4096

  • — of which central

64

  • ● Outputs

4096

  • — of which central

64

Hardware configuration

Number of expansion units, max.

0

Number of DP masters

  • ● integrated

2; 1 DP and 1 DP (drive)

  • ● via CP

2; for DP

Number of operable FMs and CPs (recommended)

  • ● FM

8

  • ● CP, PtP

8

  • ● CP, LAN

8

Rack

  • ● Racks, max.

1

  • ● Modules per rack, max.

8

Time of day

Clock

  • ● Hardware clock (real-time)

Yes

  • ● retentive and synchronizable

Yes

  • ● Backup time

6wk; At 40 C ambient temperature

  • ● Deviation per day, max.

10s; Typ.: 2 s

  • ● Behavior of the clock following POWER-ON

Clock continues running after POWER OFF

  • ● Behavior of the clock following expiry of backup period

Clock continues to run with the time at which the power failure occurred

Operating hours counter

  • ● Number

4

  • ● Number/Number range

0 to 3

  • ● Range of values

0 to 2^31 hours (when using SFC 101)

  • ● Granularity

1 hour

  • ● retentive

Yes; Must be restarted at each restart

Clock synchronization

  • ● supported

Yes

  • ● to MPI, master

Yes

  • ● to MPI, slave

Yes

  • ● to DP, master

Yes

  • ● to DP, slave

Yes; Only time-of-day slave

  • ● in AS, master

Yes

  • ● in AS, slave

Yes

  • ● on Ethernet via NTP

Yes; As client

Digital inputs

Number of digital inputs

4

  • ● of which inputs usable for technological functions

4

Input characteristic curve in accordance with IEC 61131, type 1

Yes

horizontal installation

  • — up to 40 C, max.

4

  • — up to 60 C, max.

4

vertical installation

  • — up to 40 C, max.

4

Input voltage

  • ● Rated value (DC)

24V

  • ● for signal "0"

-3 to +5V

  • ● for signal "1"

+15 to +30V

Input current

  • ● for signal "1", typ.

7mA

for counter/technological functions

  • — at "0" to "1", max.

10s; Typical

  • — at "1" to "0", max.

10s; Typical

Cable length

  • ● shielded, max.

1000m

Digital outputs

Number of digital outputs

8

  • ● of which high-speed outputs

8

Functions

For technology functions, e.g. high-speed cam switch signals

Short-circuit protection

Yes

  • ● Response threshold, typ.

1A

Limitation of inductive shutdown voltage to

48 V

Controlling a digital input

No

Switching capacity of the outputs

  • ● on lamp load, max.

5W

Load resistance range

  • ● lower limit

48Ω

  • ● upper limit

4kΩ

Output voltage

  • ● for signal "0", max.

3V; (2L+)

  • ● for signal "1", min.

Rated voltage -2.5 V

Output current

  • ● for signal "1" rated value

0.5A

  • ● for signal "1" permissible range for 0 to 60 C, min.

5mA

  • ● for signal "1" permissible range for 0 to 60 C, max.

0.6A

  • ● for signal "0" residual current, max.

0.3mA

Parallel switching of two outputs

  • ● for uprating

No

  • ● for redundant control of a load

No

Switching frequency

  • ● with resistive load, max.

100Hz

  • ● with inductive load, max.

0.2Hz; According to IEC 60947-5-1, DC-13

  • ● on lamp load, max.

100Hz

horizontal installation

  • — up to 40 C, max.

4A

  • — up to 60 C, max.

3A

all other mounting positions

  • — up to 40 C, max.

4A

Integrated high-speed cams

  • ● Switching accuracy (+/-)

70 s

Cable length

  • ● shielded, max.

1000m

Analog inputs

Number of analog inputs

0

Analog outputs

Number of analog outputs

0

Connectable encoders

  • ● 2-wire sensor

No

Interfaces

Number of industrial Ethernet interfaces

1

Number of PROFINET interfaces

1

Number of RS 485 interfaces

2

Number of RS 422 interfaces

0

1. Interface

Interface type

Integrated RS 485 interface

Physics

RS 485

Isolated

Yes

Power supply to interface (15 to 30 V DC), max.

200mA

Functionality

  • ● MPI

Yes

  • ● PROFIBUS DP master

Yes

  • ● PROFIBUS DP slave

Yes

  • ● Point-to-point connection

No

MPI

  • ● Transmission rate, max.

12Mbit/s

Services

  • — PG/OP communication

Yes

  • — Routing

Yes

  • — Global data communication

Yes

  • — S7 basic communication

Yes

  • — S7 communication

Yes

  • — S7 communication, as client

No; but via CP and loadable FB

  • — S7 communication, as server

Yes

DP master

  • ● Transmission rate, max.

12Mbit/s

  • ● Number of DP slaves, max.

124

Services

  • — PG/OP communication

Yes

  • — Routing

Yes

  • — Global data communication

No

  • — S7 basic communication

Yes; I blocks only

  • — S7 communication

Yes

  • — S7 communication, as client

No

  • — S7 communication, as server

Yes

  • — Equidistance

Yes

  • — Isochronous mode

Yes; OB 61; isochronous mode can only be used alternatively on PROFIBUS DP or PROFINET IO

  • — SYNC/FREEZE

Yes

  • — Activation/deactivation of DP slaves

Yes

  • — Number of DP slaves that can be simultaneously activated/deactivated, max.

8

  • — Direct data exchange (slave-to-slave communication)

Yes; As subscriber

  • — DPV1

Yes

Address area

  • — Inputs, max.

8kbyte

  • — Outputs, max.

8kbyte

User data per DP slave

  • — Inputs, max.

244byte

  • — Outputs, max.

244byte

DP slave

  • ● Transmission rate, max.

12Mbit/s

  • ● automatic baud rate search

Yes; only with passive interface

  • ● Address area, max.

32

  • ● User data per address area, max.

32byte

Services

  • — PG/OP communication

Yes

  • — Routing

Yes; Only with active interface

  • — Global data communication

No

  • — S7 basic communication

No

  • — S7 communication

Yes

  • — S7 communication, as client

No

  • — S7 communication, as server

Yes; Connection configured on one side only

  • — Direct data exchange (slave-to-slave communication)

Yes

  • — DPV1

No

Transfer memory

  • — Inputs

244byte

  • — Outputs

244byte

2. Interface

Interface type

Integrated RS 485 interface

Physics

RS 485

Isolated

Yes

Power supply to interface (15 to 30 V DC), max.

200mA

Functionality

  • ● MPI

No

  • ● PROFIBUS DP master

Yes; DP(DRIVE)-Master

  • ● PROFIBUS DP slave

No

  • ● Point-to-point connection

No

DP master

  • ● Transmission rate, max.

12Mbit/s

  • ● Number of DP slaves, max.

64

Services

  • — PG/OP communication

No

  • — Routing

No

  • — Global data communication

No

  • — S7 basic communication

No

  • — S7 communication

No

  • — Equidistance

Yes

  • — Isochronous mode

Yes

  • — SYNC/FREEZE

No

  • — Activation/deactivation of DP slaves

Yes

  • — DPV1

No

Address area

  • — Inputs, max.

1024byte

  • — Outputs, max.

1024byte

User data per DP slave

  • — Inputs, max.

244byte

  • — Outputs, max.

244byte

DP slave

  • ● GSD file

http://support.automation.siemens.com in Product Support area

  • ● Transmission rate, max.

12Mbit/s

3. Interface

Interface type

PROFINET

Physics

Ethernet RJ45

Isolated

Yes

automatic detection of transmission rate

Yes; 10/100 Mbit/s

Autonegotiation

Yes

Autocrossing

Yes

Change of IP address at runtime, supported

Yes

Interface types

  • ● Number of ports

2

  • ● integrated switch

Yes

Media redundancy

  • ● supported

Yes

  • ● Switchover time on line break, typ.

200ms; PROFINET MRP

  • ● Number of stations in the ring, max.

50

Functionality

  • ● MPI

No

  • ● PROFINET IO Controller

Yes; Also simultaneously with IO-Device functionality

  • ● PROFINET IO Device

Yes; Also simultaneously with IO Controller functionality

  • ● PROFIBUS DP master

No

  • ● PROFIBUS DP slave

No

  • ● Open IE communication

Yes; Via TCP/IP, ISO on TCP, and UDP

  • ● Web server

Yes

PROFINET IO Controller

  • ● Transmission rate, max.

100Mbit/s

Services

  • — PG/OP communication

Yes

  • — Routing

Yes

  • — S7 communication

Yes; with loadable FBs, max. configurable connections: 16, max. number of instances: 32

  • — Isochronous mode

Yes; OB 61; isochronous mode can only be used alternatively on PROFIBUS DP or PROFINET IO

  • — Open IE communication

Yes; Via TCP/IP, ISO on TCP, and UDP

  • — Shared device

Yes

  • — Prioritized startup

Yes

  • — Number of IO devices with prioritized startup, max.

32

  • — Number of connectable IO Devices, max.

128

  • — Of which IO devices with IRT, max.

64

  • — of which in line, max.

64

  • — Number of connectable IO Devices for RT, max.

128

  • — of which in line, max.

128

  • — Activation/deactivation of IO Devices

Yes

  • — Number of IO Devices that can be simultaneously activated/deactivated, max.

8

  • — IO Devices changing during operation (partner ports), supported

Yes

  • — Number of IO Devices per tool, max.

8

  • — Device replacement without swap medium

Yes

  • — Send cycles

250 s, 500 s, 1 ms, 2 ms, 4 ms

  • — Updating time

250 s to 512 ms (depending on the operating mode, see Manual "S7-300 CPU 31xC and CPU 31x, Technical Data" for more details)

Address area

  • — Inputs, max.

8kbyte

  • — Outputs, max.

8kbyte

  • — User data consistency, max.

1024byte

PROFINET IO Device

Services

  • — PG/OP communication

Yes

  • — Routing

Yes

  • — S7 communication

Yes; with loadable FBs, max. configurable connections: 16, max. number of instances: 32

  • — Isochronous mode

No

  • — Open IE communication

Yes; Via TCP/IP, ISO on TCP, and UDP

  • — IRT

Yes

  • — PROFIenergy

Yes; With SFB 73 / 74 prepared for loadable PROFIenergy standard FB for I-Device

  • — Shared device

Yes

  • — Number of IO Controllers with shared device, max.

2

Transfer memory

  • — Inputs, max.

1440byte; Per IO Controller with shared device

  • — Outputs, max.

1440byte; Per IO Controller with shared device

Submodules

  • — Number, max.

64

  • — User data per submodule, max.

1024byte

Open IE communication

  • ● Number of connections, max.

16

  • ● Local port numbers used at the system end

0, 20, 21, 23, 25, 80, 102, 135, 161, 443, 8080, 34962, 34963, 34964, 65532, 65533, 65534, 65535

  • ● Keep-alive function, supported

Yes

Protocols

Open IE communication

  • ● TCP/IP

Yes; via integrated PROFINET interface and loadable FBs

  • — Data length for connection type 01H, max.

1460byte

  • — Data length for connection type 11H, max.

32768byte

  • — several passive connections per port, supported

Yes

  • ● ISO-on-TCP (RFC1006)

Yes; via integrated PROFINET interface and loadable FBs

  • — Data length, max.

32768byte

  • ● UDP

Yes; via integrated PROFINET interface and loadable FBs

  • — Data length, max.

1472byte

Web server

  • ● User-defined websites

Yes

  • ● Number of HTTP clients

5

Isochronous mode

Isochronous operation (application synchronized up to terminal)

Yes; Via PROFIBUS DP or PROFINET interface

Communication functions

PG/OP communication

Yes

Data record routing

Yes

Global data communication

  • ● supported

Yes

  • ● Number of GD loops, max.

8

  • ● Number of GD packets, max.

8

  • ● Number of GD packets, transmitter, max.

8

  • ● Number of GD packets, receiver, max.

8

  • ● Size of GD packets, max.

22byte

  • ● Size of GD packet (of which consistent), max.

22byte

S7 basic communication

  • ● supported

Yes

  • ● User data per job, max.

76byte

  • ● User data per job (of which consistent), max.

76byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server)

S7 communication

  • ● supported

Yes

  • ● as server

Yes

  • ● as client

Yes; via integrated PROFINET interface and loadable FB or via CP and loadable FB

  • ● User data per job, max.

See online help of STEP 7 (shared parameters of the SFBs/FBs and of the SFCs/FCs of S7 Communication)

S5 compatible communication

  • ● supported

Yes; via CP and loadable FC

Web server

  • ● supported

Yes

Number of connections

  • ● overall

32

  • ● usable for PG communication

31

  • — reserved for PG communication

1

  • — adjustable for PG communication, min.

1

  • — adjustable for PG communication, max.

31

  • ● usable for OP communication

31

  • — reserved for OP communication

1

  • — adjustable for OP communication, min.

1

  • — adjustable for OP communication, max.

31

  • ● usable for S7 basic communication

30

  • — reserved for S7 basic communication

0

  • — adjustable for S7 basic communication, min.

0

  • — adjustable for S7 basic communication, max.

30

  • ● usable for S7 communication

16

  • — reserved for S7 communication

0

  • — adjustable for S7 communication, min.

0

  • — adjustable for S7 communication, max.

16

  • ● total number of instances, max.

32

  • ● usable for routing

X1 as MPI: max. 10; X1 as DP master: max. 24; X1 as DP slave (active): max. 14; X2 as PROFINET: 24 max.

S7 message functions

Number of login stations for message functions, max.

32; Depending on the configured connections for PG/OP and S7 basic communication

Process diagnostic messages

Yes

simultaneously active Alarm-S blocks, max.

300

Test commissioning functions

Status block

Yes; Up to 2 simultaneously

Single step

Yes

Number of breakpoints

4; without continuation

Status/control

  • ● Status/control variable

Yes

  • ● Variables

Inputs, outputs, memory bits, DB, times, counters

  • ● Number of variables, max.

30

  • — of which status variables, max.

30

  • — of which control variables, max.

14

Forcing

  • ● Forcing

Yes

  • ● Forcing, variables

Inputs, outputs

  • ● Number of variables, max.

10

Diagnostic buffer

  • ● present

Yes

  • ● Number of entries, max.

500

  • — adjustable

No

  • — of which powerfail-proof

100; Only the last 100 entries are retained

  • ● Number of entries readable in RUN, max.

499

  • — can be set

Yes; From 10 to 499

  • — preset

10

Service data

  • ● can be read out

Yes

Interrupts/diagnostics/status information

Alarms

No

Diagnostic functions

No

Diagnostics indication LED

  • ● Status indicator digital input (green)

Yes

  • ● Status indicator digital output (green)

Yes

Potential separation

Potential separation digital inputs

  • ● between the channels and backplane bus

Yes

Potential separation digital outputs

  • ● between the channels and backplane bus

Yes

Isolation

Isolation tested with

500 V DC

Ambient conditions

Ambient temperature during operation

  • ● min.

0C

  • ● max.

60C

Configuration

Configuration software

  • ● STEP 7

Yes; STEP 7 V5.5 SP2 or higher and S7-Technology Option Package V4.2 SP3, S7 F Configuration Pack V5.5 SP10, S7 Distributed Safety Option Package V5.4 SP5

Programming

  • ● Command set

see instruction list

  • ● Nesting levels

8

  • ● System functions (SFC)

see instruction list

  • ● System function blocks (SFB)

see instruction list

Programming language

  • — LAD

Yes

  • — FBD

Yes

  • — STL

Yes

  • — SCL

Yes

  • — CFC

Yes

  • — GRAPH

Yes

  • — HiGraph

Yes

Know-how protection

  • ● User program protection/password protection

Yes

  • ● Block encryption

Yes; With S7 block Privacy

Dimensions

Width

120mm

Height

125mm

Depth

130mm

Weights

Weight, approx.

640g
skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
DENDOR

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS -

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK -

  © " " 2007-2022
  (4872) 700-366  skenergo@mail.ru 		.