Digital F-output modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Digital F-output modules

| | | | | |

Article number	6ES7136-6DB00-0CA0	6ES7136-6DC00-0CA0
	ET 200SP, EL-MOD., F-DQ 4XDC 24V/2A	ET 200SP, F-DQ 8X 24VDC/0.5A PP
General information
Product type designation	F-DQ 4x24 V DC/2 A PM HF	F-DQ 8x24 V DC/0.5 A PP HF
Firmware version
в—Џ FW update possible		Yes
usable BaseUnits		BU type A0
Color code for module-specific color identification plate		CC02
Product function
в—Џ I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
Engineering with
в—Џ STEP 7 TIA Portal configurable/integrated as of version	V12	V14 SP1 with HSP 202
в—Џ STEP 7 configurable/integrated as of version	V5.5 SP3 / -	Still being prepared
в—Џ PROFINET as of GSD version/GSD revision	V2.31
Supply voltage
Rated value (DC)	24 V	24 V
permissible range, lower limit (DC)	20.4 V	20.4 V
permissible range, upper limit (DC)	28.8 V	28.8 V
Reverse polarity protection	Yes	Yes
Input current
Current consumption (rated value)	75 mA; without load	75 mA; without load
Current consumption, max.	21 mA; From the backplane bus	21 mA; From the backplane bus
Output voltage
Rated value (DC)	24 V	24 V
Power
Power available from the backplane bus	70 mW	70 mW
Power loss
Power loss, typ.	4 W	3 W
Address area
Address space per module
в—Џ Inputs	5 byte	6 byte; 5 bytes non-RIOforFA; 6 bytes RIOforFA
в—Џ Outputs	5 byte	6 byte; 5 bytes non-RIOforFA; 6 bytes RIOforFA
Hardware configuration
Automatic encoding
в—Џ Electronic coding element type F		Yes
Digital outputs
Number of digital outputs	4	8
Short-circuit protection	Yes	Yes
в—Џ Response threshold, typ.	> 3.3 A	Min. 0.7 A
Open-circuit detection	Yes	No
в—Џ Response threshold, typ.	8 mA
Overload protection	Yes
в—Џ Response threshold, typ.	2.9 A
Limitation of inductive shutdown voltage to	Typ. -2x 47 V	Typ. -39 V
Controlling a digital input		Yes
Switching capacity of the outputs
в—Џ with resistive load, max.	2 A	0.5 A
в—Џ on lamp load, max.	10 W	2 W
Load resistance range
в—Џ lower limit	12 в„¦	48 в„¦
в—Џ upper limit	2 000 в„¦	12 000 в„¦
Output voltage
в—Џ for signal "1", min.	24 V; L+ (-0.5 V)	24 V; L+ (-0.5 V)
Output current
в—Џ for signal "1" rated value	2 A	0.5 A
в—Џ for signal "0" residual current, max.	0.5 mA	0.5 mA
Switching frequency
в—Џ with resistive load, max.	30 Hz; Symmetrical	30 Hz; Symmetrical
в—Џ with inductive load, max.	0.1 Hz; according to IEC 60947-5-1, DC-13, symmetrical	0.1 Hz; according to IEC 60947-5-1, DC-13, symmetrical
в—Џ with capacitive load, max.		2 Hz; Symmetrical
в—Џ on lamp load, max.	10 Hz; Symmetrical	10 Hz; Symmetrical
Total current of the outputs
в—Џ Current per channel, max.	2 A; Note derating data in the manual	0.5 A; Note derating data in the manual
в—Џ Current per module, max.	6 A; Note derating data in the manual	3 A; Note derating data in the manual
Total current of the outputs (per module)
horizontal installation
вЂ” up to 40 °C, max.		3 A
вЂ” up to 50 °C, max.		2.5 A
вЂ” up to 60 °C, max.		2 A
vertical installation
вЂ” up to 50 °C, max.		2 A
Cable length
в—Џ shielded, max.	1 000 m	100 m
в—Џ unshielded, max.	500 m	100 m
Interrupts/diagnostics/status information
Diagnostics function	Yes, "Alarms/diagnostic messages" section in the manual	Yes, "Alarms/diagnostic messages" section in the manual
Substitute values connectable	No	No
Alarms
в—Џ Diagnostic alarm	Yes	Yes
Diagnostics indication LED
в—Џ RUN LED	Yes; Green LED	Yes; Green LED
в—Џ ERROR LED	Yes; Red LED	Yes; Red LED
в—Џ Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED	Yes; green PWR LED
в—Џ Channel status display	Yes; Green LED	Yes; Green LED
в—Џ for channel diagnostics	Yes; Red LED	Yes; Red LED
в—Џ for module diagnostics	Yes; green/red DIAG LED	Yes; green/red DIAG LED
Potential separation
Potential separation channels
в—Џ between the channels	No	No
в—Џ between the channels and backplane bus	Yes	Yes
в—Џ between the channels and the power supply of the electronics	No	No
Permissible potential difference
between different circuits	75 V DC/60 V AC
Isolation
Isolation tested with	707 V DC (type test)	707 V DC (type test)
Ambient conditions
Ambient temperature during operation
в—Џ horizontal installation, min.	0 °C	0 °C
в—Џ horizontal installation, max.	60 °C	60 °C
в—Џ vertical installation, min.	0 °C	0 °C
в—Џ vertical installation, max.	50 °C	50 °C
Dimensions
Width	15 mm	15 mm
Height	73 mm
Depth	58 mm
Weights
Weight, approx.	57 g	48 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания