Siemens
01 2018
(4872) 700-366
skenergo@mail.ru
 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 |  |  |  |  
 01 2017  01 2016  01 2015  01 2014  
Overview | Design | Function | Programming | Technical specifications  | Ordering data | Accessories/ordering data |

Article number

6AG1215-1AG40-4XB0

6AG1215-1AG40-5XB0

6AG1215-1AG40-2XB0

SIPLUS S7-1200 CPU 1215C DC/DC/DC

SIPLUS S7-1200 CPU 1215C DC/DC/DC

SIPLUS S7-1200 CPU 1215C DC/DC/DC

General information

Product type designation

CPU 1215C DC/DC/DC

CPU 1215C DC/DC/DC

CPU 1215C DC/DC/DC

Firmware version

V4.1

V4.1

V4.1

Engineering with

  • ● Programming package

STEP 7 V13 SP1 or higher

STEP 7 V13 SP1 or higher

STEP 7 V13 SP1 or higher

Supply voltage

Rated value (DC)

  • ● 24 V DC

Yes

Yes

Yes

permissible range, lower limit (DC)

20.4V

20.4V

20.4V

permissible range, upper limit (DC)

28.8V

28.8V

28.8V

Load voltage L+

  • ● Rated value (DC)

24V

24V

24V

  • ● permissible range, lower limit (DC)

5V

5V

5V

  • ● permissible range, upper limit (DC)

250V

250V

250V

Input current

Current consumption (rated value)

500mA; CPU only

500mA; CPU only

500mA; CPU only

Current consumption, max.

1500mA; CPU with all expansion modules

1500mA; CPU with all expansion modules

1500mA; CPU with all expansion modules

Inrush current, max.

12A; at 28.8 V DC

12A; at 28.8 V DC

12A; at 28.8 V DC

Output current

for backplane bus (5 V DC), max.

1600mA; Max. 5 V DC for SM and CM

1600mA; Max. 5 V DC for SM and CM

1600mA; Max. 5 V DC for SM and CM

Encoder supply

24 V encoder supply

  • ● 24 V

L+ minus 4 V DC min.

L+ minus 4 V DC min.

L+ minus 4 V DC min.

Power loss

Power loss, typ.

12W

12W

12W

Memory

Work memory

  • ● integrated

125kbyte

100kbyte

100kbyte

  • ● expandable

No

No

No

Load memory

  • ● integrated

4Mbyte

4Mbyte

4Mbyte

  • ● Plug-in (SIMATIC Memory Card), max.

with SIMATIC memory card

with SIMATIC memory card

with SIMATIC memory card

Backup

  • ● present

Yes; maintenance-free

Yes; maintenance-free

Yes; maintenance-free

  • ● without battery

Yes

Yes

Yes

CPU processing times

for bit operations, typ.

0.085s; / instruction

0.085s; / instruction

0.085s; / instruction

for word operations, typ.

1.5s; / instruction

1.5s; / instruction

1.5s; / instruction

for floating point arithmetic, typ.

2.5s; / instruction

2.5s; / instruction

2.5s; / instruction

CPU-blocks

Number of blocks (total)

DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used

DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used

DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used

OB

  • ● Number, max.

Limited only by RAM for code

Limited only by RAM for code

Limited only by RAM for code

Data areas and their retentivity

Retentive data area (incl. timers, counters, flags), max.

10kbyte

10kbyte

10kbyte

Flag

  • ● Number, max.

8kbyte; Size of bit memory address area

8kbyte; Size of bit memory address area

8kbyte; Size of bit memory address area

Address area

I/O address area

  • ● Inputs

1024byte

1024byte

1024byte

  • ● Outputs

1024byte

1024byte

1024byte

Process image

  • ● Inputs, adjustable

1kbyte

1kbyte

1kbyte

  • ● Outputs, adjustable

1kbyte

1kbyte

1kbyte

Hardware configuration

Number of modules per system, max.

3 comm. modules, 1 signal board, 8 signal modules

3 comm. modules, 1 signal board, 8 signal modules

3 communication modules, no signal board can be used, 8 signal modules

Time of day

Clock

  • ● Hardware clock (real-time)

Yes

Yes

Yes

  • ● Backup time

480h; Typical

480h; Typical

480h; Typical

  • ● Deviation per day, max.

60 s/month at 25 C

60 s/month at 25 C

60 s/month at 25 C

Digital inputs

Number of digital inputs

14; Integrated

14; Integrated

14; Integrated

  • ● of which inputs usable for technological functions

6; HSC (High Speed Counting)

6; HSC (High Speed Counting)

6; HSC (High Speed Counting)

Source/sink input

Yes

Yes

Yes

Number of simultaneously controllable inputs

all mounting positions

  • — up to 40 C, max.

14

14

14

Input voltage

  • ● Rated value (DC)

24V

24V

24V

  • ● for signal "0"

5 V DC at 1 mA

5 V DC at 1 mA

5 V DC at 1 mA

  • ● for signal "1"

15 V DC at 2.5 mA

15 V DC at 2.5 mA

15 V DC at 2.5 mA

Input delay (for rated value of input voltage)

for standard inputs

  • — parameterizable

0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four

0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four

0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four

  • — at "0" to "1", min.

0.2ms

0.2ms

0.2ms

  • — at "0" to "1", max.

12.8ms

12.8ms

12.8ms

for interrupt inputs

  • — parameterizable

Yes

Yes

Yes

for counter/technological functions

  • — parameterizable

Single phase : 3 at 100 kHz & 3 at 30 kHz, differential: 3 at 80 kHz & 3 at 30 kHz

Single phase : 3 at 100 kHz & 3 at 30 kHz, differential: 3 at 80 kHz & 3 at 30 kHz

Single phase : 3 at 100 kHz & 3 at 30 kHz, differential: 3 at 80 kHz & 3 at 30 kHz

Cable length

  • ● shielded, max.

500m; 50 m for technological functions

500m; 50 m for technological functions

500m; 50 m for technological functions

  • ● unshielded, max.

300m; For technological functions: No

300m; For technological functions: No

300m; For technological functions: No

Digital outputs

Number of digital outputs

10

10

10

  • ● of which high-speed outputs

4; 100 kHz Pulse Train Output

4; 100 kHz Pulse Train Output

4; 100 kHz Pulse Train Output

Switching capacity of the outputs

  • ● with resistive load, max.

0.5A

0.5A

0.5A

Output delay with resistive load

  • ● "0" to "1", max.

1s

1s

1s

  • ● "1" to "0", max.

5s

5s

5s

Cable length

  • ● shielded, max.

500m

500m

500m

  • ● unshielded, max.

150m

150m

150m

Analog inputs

Number of analog inputs

2

2

2

Input ranges

  • ● Voltage

Yes

Yes

Yes

Input ranges (rated values), voltages

  • ● 0 to +10 V

Yes

Yes

Yes

  • ● Input resistance (0 to 10 V)

≥100k ohms

≥100k ohms

≥100k ohms

Cable length

  • ● shielded, max.

100m; twisted and shielded

100m; twisted and shielded

100m; twisted and shielded

Analog outputs

Number of analog outputs

2

2

2

Output ranges, current

  • ● 0 to 20 mA

Yes

Yes

Yes

Analog value generation for the inputs

Integration and conversion time/resolution per channel

  • ● Resolution with overrange (bit including sign), max.

10bit

10bit

10bit

  • ● Integration time, parameterizable

Yes

Yes

Yes

  • ● Conversion time (per channel)

625s

625s

625s

Analog value generation for the outputs

Integration and conversion time/resolution per channel

  • ● Resolution with overrange (bit including sign), max.

10bit

10bit

10bit

Encoder

Connectable encoders

  • ● 2-wire sensor

Yes

Yes

Yes

1. Interface

Interface type

PROFINET

PROFINET

PROFINET

Physics

Ethernet

Ethernet

Ethernet

Isolated

Yes

Yes

Yes

automatic detection of transmission rate

Yes

Yes

Yes

Autonegotiation

Yes

Yes

Yes

Autocrossing

Yes

Yes

Yes

Functionality

  • ● PROFINET IO Controller

Yes

Yes

Yes

  • ● PROFINET IO Device

Yes; Also simultaneously with IO-Device functionality

Yes; Also simultaneously with IO-Device functionality

Yes; Also simultaneously with IO-Device functionality

PROFINET IO Controller

  • ● Transmission rate, max.

100Mbit/s

100Mbit/s

100Mbit/s

Services

  • — Number of connectable IO Devices, max.

16

16

16

PROFINET IO Device

Services

  • — Shared device

Yes

Yes

Yes

  • — Number of IO Controllers with shared device, max.

2

2

2

Protocols

Supports protocol for PROFINET IO

Yes

Yes

Yes

PROFIBUS

Yes; CM 1243-5 required

Yes; CM 1243-5 required

Yes; CM 1243-5 required

AS-Interface

Yes

Yes

Yes

Protocols (Ethernet)

  • ● TCP/IP

Yes

Yes

Yes

Open IE communication

  • ● TCP/IP

Yes

Yes

Yes

  • ● ISO-on-TCP (RFC1006)

Yes

Yes

Yes

  • ● UDP

Yes

Yes

Yes

Web server

  • ● User-defined websites

Yes

Yes

Yes

Further protocols

  • ● MODBUS

Yes

Yes

Yes

Communication functions

S7 communication

  • ● supported

Yes

Yes

Yes

  • ● as server

Yes

Yes

Yes

  • ● as client

Yes

Yes

Yes

Web server

  • ● supported

Yes

Yes

Yes

Number of connections

  • ● overall

16; dynamically

16; dynamically

16; dynamically

Test commissioning functions

Status/control

  • ● Status/control variable

Yes

Yes

Yes

  • ● Variables

Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters

Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters

Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters

Forcing

  • ● Forcing

Yes

Yes

Yes

Diagnostic buffer

  • ● present

Yes

Yes

Yes

Integrated Functions

Number of counters

6

6

6

Counting frequency (counter) max.

100kHz

100kHz

100kHz

Frequency measurement

Yes

Yes

Yes

controlled positioning

Yes

Yes

Yes

Number of position-controlled positioning axes, max.

8

8

Number of positioning axes via pulse-direction interface

4; With integrated outputs

4; With integrated outputs

PID controller

Yes

Yes

Yes

Number of alarm inputs

4

4

4

Number of pulse outputs

4

4

4

Limit frequency (pulse)

100kHz

100kHz

100kHz

Potential separation

Potential separation digital inputs

  • ● Potential separation digital inputs

No

No

No

  • ● between the channels, in groups of

1

1

1

Potential separation digital outputs

  • ● between the channels

No

No

No

  • ● between the channels, in groups of

1

1

1

EMC

Interference immunity against discharge of static electricity

  • ● Interference immunity against discharge of static electricity acc. to IEC 61000-4-2

Yes

Yes

Yes

  • — Test voltage at air discharge

8kV

8kV

8kV

  • — Test voltage at contact discharge

6kV

6kV

6kV

Interference immunity to cable-borne interference

  • ● Interference immunity on supply lines acc. to IEC 61000-4-4

Yes

Yes

Yes

  • ● Interference immunity on signal cables acc. to IEC 61000-4-4

Yes

Yes

Yes

Interference immunity against voltage surge

  • ● on the supply lines acc. to IEC 61000-4-5

Yes

Yes

Yes

Interference immunity against conducted variable disturbance induced by high-frequency fields

  • ● Interference immunity against high-frequency radiation acc. to IEC 61000-4-6

Yes

Yes

Yes

Emission of radio interference acc. to EN 55 011

  • ● Limit class A, for use in industrial areas

Yes; Group 1

Yes; Group 1

Yes; Group 1

  • ● Limit class B, for use in residential areas

Yes; When appropriate measures are used to ensure compliance with the limits for Class B according to EN 55011

Yes; When appropriate measures are used to ensure compliance with the limits for Class B according to EN 55011

Yes; When appropriate measures are used to ensure compliance with the limits for Class B according to EN 55011

Degree and class of protection

Degree of protection acc. to EN 60529

  • ● IP20

Yes

Yes

Yes

Standards, approvals, certificates

CE mark

Yes

Yes

Yes

Ambient conditions

Free fall

  • ● Fall height, max.

0.3m; five times, in product package

0.3m; five times, in product package

0.3m; five times, in product package

Ambient temperature during operation

  • ● min.

-20C; = Tmin; Startup @ 0 C

-40C; = Tmin; Startup @ -25 C

-40C; = Tmin; Startup @ -25 C

  • ● max.

60C; Number of simultaneously activated inputs or outputs 7 or 5 (no adjacent points) at 60 C horizontal or 50 C vertical, 14 or 10 at 55 C horizontal or 45 C vertical

60C; = Tmax; Tmax > +55 C number of simultaneously switched-on digital inputs 7, digital outputs 5, analog inputs 2, analog outputs 2 (no adjacent points) with horizontal mounting position

70C; = Tmax; Tmax > +55 C number of simultaneously switched-on digital inputs 7, digital outputs 5, analog inputs 2, analog outputs 2 (no adjacent points) with horizontal mounting position; Tmax > +60 C number of simultaneously switched-on digital inputs 7, digital outputs 5, analog inputs 1, analog outputs 1 (no adjacent points) with horizontal mounting position

Ambient temperature during storage/transportation

  • ● min.

-40C

-40C

-40C

  • ● max.

70C

70C

70C

Altitude during operation relating to sea level

  • ● Ambient air temperature-barometric pressure-altitude

Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)

Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)

Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)

Relative humidity

  • ● With condensation, tested in accordance with IEC 60068-2-38, max.

100%; RH incl. condensation/frost (no commissioning under condensation conditions)

100%; RH incl. condensation/frost (no commissioning under condensation conditions)

100%; RH incl. condensation/frost (no commissioning under condensation conditions)

Vibrations

  • ● Vibration resistance during operation acc. to IEC 60068-2-6

2 g (m/s) wall mounting, 1 g (m/s) DIN rail

2 g (m/s) wall mounting, 1 g (m/s) DIN rail

2 g (m/s) wall mounting, 1 g (m/s) DIN rail

  • ● Operation, tested according to IEC 60068-2-6

Yes

Yes

Yes

Shock testing

  • ● tested according to IEC 60068-2-27

Yes; IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms

Yes; IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms

Yes; IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms

Use in stationary industrial systems

  • — to biologically active substances according to EN 60721-3-3

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request

  • — to chemically active substances according to EN 60721-3-3

Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

  • — to mechanically active substances according to EN 60721-3-3

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!

Configuration

Configuration software

  • ● STEP 7

Yes

Yes

Yes

Programming

Programming language

  • — LAD

Yes

Yes

Yes

  • — FBD

Yes

Yes

Yes

  • — SCL

Yes

Yes

Yes

Cycle time monitoring

  • ● adjustable

Yes

Yes

Yes

Dimensions

Width

130mm

130mm

130mm

Height

100mm

100mm

100mm

Depth

75mm

75mm

75mm

Weights

Weight, approx.

500g

500g

500g


Article number

6AG1215-1BG40-4XB0

6AG1215-1BG40-5XB0

6AG1215-1BG40-2XB0

SIPLUS S7-1200 CPU 1215C AC/DC/RLY

SIPLUS S7-1200 CPU 1215C AC/DC/RLY

SIPLUS S7-1200 CPU 1215C AC/DC/RLY

General information

Product type designation

CPU 1215C AC/DC/relay

CPU 1215C AC/DC/relay

CPU 1215C AC/DC/relay

Firmware version

V4.1

V4.1

V4.1

Engineering with

  • ● Programming package

STEP 7 V13 SP1 or higher

STEP 7 V13 SP1 or higher

STEP 7 V13 SP1 or higher

Supply voltage

Rated value (AC)

  • ● 120 V AC

Yes

Yes

Yes

  • ● 230 V AC

Yes

Yes

Yes

permissible range, lower limit (AC)

85V

85V

85V

permissible range, upper limit (AC)

265V

265V

265V

Line frequency

  • ● permissible range, lower limit

47Hz

47Hz

47Hz

  • ● permissible range, upper limit

63Hz

63Hz

63Hz

Input current

Current consumption (rated value)

100 mA at 120 V AC; 50 mA at 240 V AC

100 mA at 120 V AC; 50 mA at 240 V AC

100 mA at 120 V AC; 50 mA at 240 V AC

Current consumption, max.

300 mA at 120 V AC; 150 mA at 240 V AC

300 mA at 120 V AC; 150 mA at 240 V AC

300 mA at 120 V AC; 150 mA at 240 V AC

Inrush current, max.

20A; at 264 V

20A; at 264 V

20A; at 264 V

Encoder supply

24 V encoder supply

  • ● 24 V

20.4 to 28.8V

20.4 to 28.8V

20.4 to 28.8V

Power loss

Power loss, typ.

12W

12W

12W

Memory

Work memory

  • ● integrated

125kbyte

100kbyte

100kbyte

  • ● expandable

No

No

No

Load memory

  • ● integrated

4Mbyte

4Mbyte

4Mbyte

  • ● Plug-in (SIMATIC Memory Card), max.

with SIMATIC memory card

with SIMATIC memory card

with SIMATIC memory card

Backup

  • ● present

Yes; maintenance-free

Yes; maintenance-free

Yes; maintenance-free

  • ● without battery

Yes

Yes

Yes

CPU processing times

for bit operations, typ.

0.085s; / instruction

0.085s; / instruction

0.085s; / instruction

for word operations, typ.

1.7s; / instruction

1.7s; / instruction

1.7s; / instruction

for floating point arithmetic, typ.

2.5s; / instruction

2.5s; / instruction

2.5s; / instruction

CPU-blocks

Number of blocks (total)

DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used

DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used

DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used

OB

  • ● Number, max.

Limited only by RAM for code

Limited only by RAM for code

Limited only by RAM for code

Data areas and their retentivity

Retentive data area (incl. timers, counters, flags), max.

10kbyte

10kbyte

10kbyte

Flag

  • ● Number, max.

8kbyte; Size of bit memory address area

8kbyte; Size of bit memory address area

8kbyte; Size of bit memory address area

Process image

  • ● Inputs, adjustable

1kbyte

1kbyte

1kbyte

  • ● Outputs, adjustable

1kbyte

1kbyte

1kbyte

Hardware configuration

Number of modules per system, max.

3 comm. modules, 1 signal board, 8 signal modules

3 comm. modules, 1 signal board, 8 signal modules

3 communication modules, no signal board can be used, 8 signal modules

Time of day

Clock

  • ● Hardware clock (real-time)

Yes

Yes

Yes

  • ● Backup time

480h; Typical

480h; Typical

480h; Typical

  • ● Deviation per day, max.

60 s/month at 25 C

60 s/month at 25 C

60 s/month at 25 C

Digital inputs

Number of digital inputs

14; Integrated

14; Integrated

14; Integrated

  • ● of which inputs usable for technological functions

6; HSC (High Speed Counting)

6; HSC (High Speed Counting)

6; HSC (High Speed Counting)

Source/sink input

Yes

Yes

Yes

Number of simultaneously controllable inputs

all mounting positions

  • — up to 40 C, max.

14

14

14

Input voltage

  • ● Rated value (DC)

24V

24V

24V

  • ● for signal "0"

5 V DC at 1 mA

5 V DC at 1 mA

5 V DC at 1 mA

  • ● for signal "1"

15 V DC at 2.5 mA

15 V DC at 2.5 mA

15 V DC at 2.5 mA

Input delay (for rated value of input voltage)

for standard inputs

  • — parameterizable

Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four

Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four

Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four

  • — at "0" to "1", min.

0.2ms

0.2ms

0.2ms

  • — at "0" to "1", max.

12.8ms

12.8ms

12.8ms

for interrupt inputs

  • — parameterizable

Yes

Yes

Yes

for counter/technological functions

  • — parameterizable

Yes; Single phase : 3 at 100 kHz & 3 at 30 kHz, differential: 3 at 80 kHz & 3 at 30 kHz

Yes; Single phase : 3 at 100 kHz & 3 at 30 kHz, differential: 3 at 80 kHz & 3 at 30 kHz

Yes; Single phase : 3 at 100 kHz & 3 at 30 kHz, differential: 3 at 80 kHz & 3 at 30 kHz

Cable length

  • ● shielded, max.

500m; 50 m for technological functions

500m; 50 m for technological functions

500m; 50 m for technological functions

  • ● unshielded, max.

300m; For technological functions: No

300m; For technological functions: No

300m; For technological functions: No

Digital outputs

Number of digital outputs

10; Relays

10; Relays

10; Relays

Switching capacity of the outputs

  • ● with resistive load, max.

2A

2A

2A

  • ● on lamp load, max.

30 W with DC, 200 W with AC

30 W with DC, 200 W with AC

30 W with DC, 200 W with AC

Output delay with resistive load

  • ● "0" to "1", max.

10ms; max.

10ms; max.

10ms; max.

  • ● "1" to "0", max.

10ms; max.

10ms; max.

10ms; max.

Switching frequency

  • ● of the pulse outputs, with resistive load, max.

1Hz

1Hz

1Hz

Relay outputs

  • ● Number of relay outputs

10

10

10

  • ● Number of operating cycles, max.

mechanically 10 million, at rated load voltage 100 000

mechanically 10 million, at rated load voltage 100 000

mechanically 10 million, at rated load voltage 100 000

Cable length

  • ● shielded, max.

500m

500m

500m

  • ● unshielded, max.

150m

150m

150m

Analog inputs

Number of analog inputs

2

2

2

Input ranges

  • ● Voltage

Yes

Yes

Yes

Input ranges (rated values), voltages

  • ● 0 to +10 V

Yes

Yes

Yes

  • ● Input resistance (0 to 10 V)

≥100k ohms

≥100k ohms

≥100k ohms

Cable length

  • ● shielded, max.

100m; twisted and shielded

100m; twisted and shielded

100m; twisted and shielded

Analog outputs

Number of analog outputs

2

2

2

Output ranges, current

  • ● 0 to 20 mA

Yes

Yes

Yes

Analog value generation for the inputs

Integration and conversion time/resolution per channel

  • ● Resolution with overrange (bit including sign), max.

10bit

10bit

10bit

  • ● Integration time, parameterizable

Yes

Yes

Yes

  • ● Conversion time (per channel)

625s

625s

625s

Analog value generation for the outputs

Integration and conversion time/resolution per channel

  • ● Resolution with overrange (bit including sign), max.

10bit

10bit

10bit

Encoder

Connectable encoders

  • ● 2-wire sensor

Yes

Yes

Yes

1. Interface

Interface type

PROFINET

PROFINET

PROFINET

Physics

Ethernet

Ethernet

Ethernet

Isolated

Yes

Yes

Yes

automatic detection of transmission rate

Yes

Yes

Yes

Autonegotiation

Yes

Yes

Yes

Autocrossing

Yes

Yes

Yes

Functionality

  • ● PROFINET IO Controller

Yes

Yes

Yes

  • ● PROFINET IO Device

Yes; Also simultaneously with IO-Device functionality

Yes; Also simultaneously with IO-Device functionality

Yes; Also simultaneously with IO-Device functionality

PROFINET IO Controller

  • ● Transmission rate, max.

100Mbit/s

100Mbit/s

100Mbit/s

Services

  • — Number of connectable IO Devices, max.

16

16

16

PROFINET IO Device

Services

  • — Shared device

Yes

Yes

Yes

  • — Number of IO Controllers with shared device, max.

2

2

2

Protocols

Supports protocol for PROFINET IO

Yes

Yes

Yes

PROFIBUS

Yes; CM 1243-5 required

Yes; CM 1243-5 required

Yes; CM 1243-5 required

AS-Interface

Yes

Yes

Yes

Protocols (Ethernet)

  • ● TCP/IP

Yes

Yes

Yes

Open IE communication

  • ● TCP/IP

Yes

Yes

Yes

  • ● ISO-on-TCP (RFC1006)

Yes

Yes

Yes

  • ● UDP

Yes

Yes

Yes

Web server

  • ● User-defined websites

Yes

Yes

Yes

Further protocols

  • ● MODBUS

Yes

Yes

Yes

Communication functions

S7 communication

  • ● supported

Yes

Yes

Yes

  • ● as server

Yes

Yes

Yes

  • ● as client

Yes

Yes

Yes

Web server

  • ● supported

Yes

Yes

Yes

Number of connections

  • ● overall

16; dynamically

16; dynamically

16; dynamically

Test commissioning functions

Status/control

  • ● Status/control variable

Yes

Yes

Yes

  • ● Variables

Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters

Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters

Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters

Forcing

  • ● Forcing

Yes

Yes

Yes

Diagnostic buffer

  • ● present

Yes

Yes

Yes

Traces

  • ● Number of configurable Traces

2; Up to 512 KB of data per trace are possible

2; Up to 512 KB of data per trace are possible

2; Up to 512 KB of data per trace are possible

Integrated Functions

Number of counters

6

6

6

Counting frequency (counter) max.

100kHz

100kHz

100kHz

Frequency measurement

Yes

Yes

Yes

controlled positioning

Yes

Yes

Yes

Number of position-controlled positioning axes, max.

8

8

8

Number of positioning axes via pulse-direction interface

Up to 4 with SB 1222

Up to 4 with SB 1222

PID controller

Yes

Yes

Yes

Number of alarm inputs

4

4

4

Potential separation

Potential separation digital inputs

  • ● Potential separation digital inputs

500V AC for 1 minute

500V AC for 1 minute

500V AC for 1 minute

  • ● between the channels, in groups of

1

1

1

Potential separation digital outputs

  • ● Potential separation digital outputs

Relays

Relays

Relays

  • ● between the channels

No

No

No

  • ● between the channels, in groups of

2

2

2

EMC

Interference immunity against discharge of static electricity

  • ● Interference immunity against discharge of static electricity acc. to IEC 61000-4-2

Yes

Yes

Yes

  • — Test voltage at air discharge

8kV

8kV

8kV

  • — Test voltage at contact discharge

6kV

6kV

6kV

Interference immunity to cable-borne interference

  • ● Interference immunity on supply lines acc. to IEC 61000-4-4

Yes

Yes

Yes

  • ● Interference immunity on signal cables acc. to IEC 61000-4-4

Yes

Yes

Yes

Interference immunity against voltage surge

  • ● on the supply lines acc. to IEC 61000-4-5

Yes

Yes

Yes

Interference immunity against conducted variable disturbance induced by high-frequency fields

  • ● Interference immunity against high-frequency radiation acc. to IEC 61000-4-6

Yes

Yes

Yes

Emission of radio interference acc. to EN 55 011

  • ● Limit class A, for use in industrial areas

Yes; Group 1

Yes; Group 1

Yes; Group 1

  • ● Limit class B, for use in residential areas

Yes; When appropriate measures are used to ensure compliance with the limits for Class B according to EN 55011

Yes; When appropriate measures are used to ensure compliance with the limits for Class B according to EN 55011

Yes; When appropriate measures are used to ensure compliance with the limits for Class B according to EN 55011

Degree and class of protection

Degree of protection acc. to EN 60529

  • ● IP20

Yes

Yes

Yes

Standards, approvals, certificates

CE mark

Yes

Yes

Yes

Ambient conditions

Free fall

  • ● Fall height, max.

0.3m; five times, in product package

0.3m; five times, in product package

0.3m; five times, in product package

Ambient temperature during operation

  • ● min.

-20C; = Tmin; Startup @ 0 C

-40C; = Tmin; Startup @ -25 C

-40C; = Tmin; Startup @ -25 C

  • ● max.

60C; Number of simultaneously activated inputs or outputs 7 or 5 (no adjacent points) at 60 C horizontal or 50 C vertical, 14 or 10 at 55 C horizontal or 45 C vertical

60C; = Tmax; Tmax > +55 C number of simultaneously switched-on digital inputs 7, digital outputs 5, analog inputs 2, analog outputs 2 (no adjacent points) with horizontal mounting position

70C; = Tmax; Tmax > +55 C number of simultaneously switched-on digital inputs 7, digital outputs 5, analog inputs 2, analog outputs 2 (no adjacent points) with horizontal mounting position; Tmax > +60 C number of simultaneously switched-on digital inputs 7, digital outputs 5, analog inputs 1, analog outputs 1 (no adjacent points) with horizontal mounting position

Ambient temperature during storage/transportation

  • ● min.

-40C

-40C

-40C

  • ● max.

70C

70C

70C

Altitude during operation relating to sea level

  • ● Ambient air temperature-barometric pressure-altitude

Tmin ... Tmax at 1 080 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax - 20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m); from 2 000 m max. 132 V AC

Tmin ... Tmax at 1 080 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax - 20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m); from 2 000 m max. 132 V AC

Tmin ... Tmax at 1 080 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax - 20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m); from 2 000 m max. 132 V AC

Relative humidity

  • ● With condensation, tested in accordance with IEC 60068-2-38, max.

100%; RH incl. condensation/frost (no commissioning under condensation conditions)

100%; RH incl. condensation/frost (no commissioning under condensation conditions)

100%; RH incl. condensation/frost (no commissioning under condensation conditions)

Vibrations

  • ● Vibration resistance during operation acc. to IEC 60068-2-6

2 g (m/s) wall mounting, 1 g (m/s) DIN rail

2 g (m/s) wall mounting, 1 g (m/s) DIN rail

2 g (m/s) wall mounting, 1 g (m/s) DIN rail

  • ● Operation, tested according to IEC 60068-2-6

Yes

Yes

Yes

Shock testing

  • ● tested according to IEC 60068-2-27

Yes; IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms

Yes; IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms

Yes; IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms

Use in stationary industrial systems

  • — to biologically active substances according to EN 60721-3-3

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request

  • — to chemically active substances according to EN 60721-3-3

Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

  • — to mechanically active substances according to EN 60721-3-3

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!

Programming

Programming language

  • — LAD

Yes

Yes

Yes

  • — FBD

Yes

Yes

Yes

  • — SCL

Yes

Yes

Yes

Cycle time monitoring

  • ● adjustable

Yes

Yes

Yes

Dimensions

Width

130mm

130mm

130mm

Height

100mm

100mm

100mm

Depth

75mm

75mm

75mm

Weights

Weight, approx.

550g

550g

550g


Article number

6AG1215-1HG40-4XB0

6AG1215-1HG40-5XB0

6AG1215-1HG40-2XB0

SIPLUS S7-1200 CPU 1215C DC/DC/RLY

SIPLUS S7-1200 CPU 1215C DC/DC/RLY

SIPLUS S7-1200 CPU 1215C DC/DC/RLY

General information

Product type designation

CPU 1215C DC/DC/relay

CPU 1215C DC/DC/relay

CPU 1215C DC/DC/relay

Firmware version

V4.1

V4.1

V4.1

Engineering with

  • ● Programming package

STEP 7 V13 SP1 or higher

STEP 7 V13 SP1 or higher

STEP 7 V13 SP1 or higher

Supply voltage

Rated value (DC)

  • ● 24 V DC

Yes

Yes

Yes

permissible range, lower limit (DC)

20.4V

20.4V

20.4V

permissible range, upper limit (DC)

28.8V

28.8V

28.8V

Load voltage L+

  • ● Rated value (DC)

24V

24V

24V

  • ● permissible range, lower limit (DC)

5V

5V

5V

  • ● permissible range, upper limit (DC)

250V

250V

250V

Input current

Current consumption (rated value)

500mA; CPU only

500mA; CPU only

500mA; CPU only

Current consumption, max.

1500mA; CPU with all expansion modules

1500mA; CPU with all expansion modules

1500mA; CPU with all expansion modules

Inrush current, max.

12A; at 28.8 V DC

12A; at 28.8 V DC

12A; at 28.8 V DC

Encoder supply

24 V encoder supply

  • ● 24 V

L+ minus 4 V DC min.

L+ minus 4 V DC min.

L+ minus 4 V DC min.

Power loss

Power loss, typ.

12W

12W

12W

Memory

Work memory

  • ● integrated

125kbyte

100kbyte

100kbyte

  • ● expandable

No

No

No

Load memory

  • ● integrated

4Mbyte

4Mbyte

4Mbyte

  • ● Plug-in (SIMATIC Memory Card), max.

with SIMATIC memory card

with SIMATIC memory card

with SIMATIC memory card

Backup

  • ● present

Yes; maintenance-free

Yes; maintenance-free

Yes; maintenance-free

  • ● without battery

Yes

Yes

Yes

CPU processing times

for bit operations, typ.

0.085s; / instruction

0.085s; / instruction

0.085s; / instruction

for word operations, typ.

1.7s; / instruction

1.7s; / instruction

1.7s; / instruction

for floating point arithmetic, typ.

2.5s; / instruction

2.5s; / instruction

2.5s; / instruction

CPU-blocks

Number of blocks (total)

DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used

DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used

DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used

OB

  • ● Number, max.

Limited only by RAM for code

Limited only by RAM for code

Limited only by RAM for code

Data areas and their retentivity

Retentive data area (incl. timers, counters, flags), max.

10kbyte

10kbyte

10kbyte

Flag

  • ● Number, max.

8kbyte; Size of bit memory address area

8kbyte; Size of bit memory address area

8kbyte; Size of bit memory address area

Process image

  • ● Inputs, adjustable

1kbyte

1kbyte

1kbyte

  • ● Outputs, adjustable

1kbyte

1kbyte

1kbyte

Hardware configuration

Number of modules per system, max.

3 comm. modules, 1 signal board, 8 signal modules

3 comm. modules, 1 signal board, 8 signal modules

3 communication modules, no signal board can be used, 8 signal modules

Time of day

Clock

  • ● Hardware clock (real-time)

Yes

Yes

Yes

  • ● Backup time

480h; Typical

480h; Typical

480h; Typical

  • ● Deviation per day, max.

60 s/month at 25 C

60 s/month at 25 C

60 s/month at 25 C

Digital inputs

Number of digital inputs

14; Integrated

14; Integrated

14; Integrated

  • ● of which inputs usable for technological functions

6; HSC (High Speed Counting)

6; HSC (High Speed Counting)

6; HSC (High Speed Counting)

Source/sink input

Yes

Yes

Yes

Number of simultaneously controllable inputs

all mounting positions

  • — up to 40 C, max.

14

14

14

Input voltage

  • ● Rated value (DC)

24V

24V

24V

  • ● for signal "0"

5 V DC at 1 mA

5 V DC at 1 mA

5 V DC at 1 mA

  • ● for signal "1"

15 V DC at 2.5 mA

15 V DC at 2.5 mA

15 V DC at 2.5 mA

Input current

  • ● for signal "1", typ.

1mA

1mA

1mA

Input delay (for rated value of input voltage)

for standard inputs

  • — parameterizable

0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four

0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four

0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four

  • — at "0" to "1", min.

0.2ms

0.2ms

0.2ms

  • — at "0" to "1", max.

12.8ms

12.8ms

12.8ms

for interrupt inputs

  • — parameterizable

Yes

Yes

Yes

for counter/technological functions

  • — parameterizable

Yes; Single phase : 3 at 100 kHz & 3 at 30 kHz, differential: 3 at 80 kHz & 3 at 30 kHz

Yes; Single phase : 3 at 100 kHz & 3 at 30 kHz, differential: 3 at 80 kHz & 3 at 30 kHz

Yes; Single phase : 3 at 100 kHz & 3 at 30 kHz, differential: 3 at 80 kHz & 3 at 30 kHz

Cable length

  • ● shielded, max.

500m; 50 m for technological functions

500m; 50 m for technological functions

500m; 50 m for technological functions

  • ● unshielded, max.

300m; For technological functions: No

300m; For technological functions: No

300m; For technological functions: No

Digital outputs

Number of digital outputs

10; Relays

10; Relays

10; Relays

Switching capacity of the outputs

  • ● with resistive load, max.

2A

2A

2A

  • ● on lamp load, max.

30 W with DC, 200 W with AC

30 W with DC, 200 W with AC

30 W with DC, 200 W with AC

Output delay with resistive load

  • ● "0" to "1", max.

10ms; max.

10ms; max.

10ms; max.

  • ● "1" to "0", max.

10ms; max.

10ms; max.

10ms; max.

Switching frequency

  • ● of the pulse outputs, with resistive load, max.

1Hz

1Hz

1Hz

Relay outputs

  • ● Number of relay outputs

10

10

10

  • ● Number of operating cycles, max.

mechanically 10 million, at rated load voltage 100 000

mechanically 10 million, at rated load voltage 100 000

mechanically 10 million, at rated load voltage 100 000

Cable length

  • ● shielded, max.

500m

500m

500m

  • ● unshielded, max.

150m

150m

150m

Analog inputs

Number of analog inputs

2

2

2

Input ranges

  • ● Voltage

Yes

Yes

Yes

Input ranges (rated values), voltages

  • ● 0 to +10 V

Yes

Yes

Yes

  • ● Input resistance (0 to 10 V)

≥100k ohms

≥100k ohms

≥100k ohms

Cable length

  • ● shielded, max.

100m; twisted and shielded

100m; twisted and shielded

100m; twisted and shielded

Analog outputs

Number of analog outputs

2

2

2

Output ranges, current

  • ● 0 to 20 mA

Yes

Yes

Yes

Analog value generation for the inputs

Integration and conversion time/resolution per channel

  • ● Resolution with overrange (bit including sign), max.

10bit

10bit

10bit

  • ● Integration time, parameterizable

Yes

Yes

Yes

  • ● Conversion time (per channel)

625s

625s

625s

Analog value generation for the outputs

Integration and conversion time/resolution per channel

  • ● Resolution with overrange (bit including sign), max.

10bit

10bit

10bit

Encoder

Connectable encoders

  • ● 2-wire sensor

Yes

Yes

Yes

1. Interface

Interface type

PROFINET

PROFINET

PROFINET

Physics

Ethernet

Ethernet

Ethernet

Isolated

Yes

Yes

Yes

automatic detection of transmission rate

Yes

Yes

Yes

Autonegotiation

Yes

Yes

Yes

Autocrossing

Yes

Yes

Yes

Functionality

  • ● PROFINET IO Controller

Yes

Yes

Yes

  • ● PROFINET IO Device

Yes; Also simultaneously with IO-Device functionality

Yes; Also simultaneously with IO-Device functionality

Yes; Also simultaneously with IO-Device functionality

PROFINET IO Controller

  • ● Transmission rate, max.

100Mbit/s

100Mbit/s

100Mbit/s

Services

  • — Number of connectable IO Devices, max.

16

16

16

PROFINET IO Device

Services

  • — Shared device

Yes

Yes

Yes

  • — Number of IO Controllers with shared device, max.

2

2

2

Protocols

Supports protocol for PROFINET IO

Yes

Yes

Yes

PROFIBUS

Yes; CM 1243-5 required

Yes; CM 1243-5 required

Yes; CM 1243-5 required

AS-Interface

Yes

Yes

Yes

Protocols (Ethernet)

  • ● TCP/IP

Yes

Yes

Yes

Open IE communication

  • ● TCP/IP

Yes

Yes

Yes

  • ● ISO-on-TCP (RFC1006)

Yes

Yes

Yes

  • ● UDP

Yes

Yes

Yes

Web server

  • ● User-defined websites

Yes

Yes

Yes

Further protocols

  • ● MODBUS

Yes

Yes

Yes

Communication functions

S7 communication

  • ● supported

Yes

Yes

Yes

  • ● as server

Yes

Yes

Yes

  • ● as client

Yes

Yes

Yes

Web server

  • ● supported

Yes

Yes

Yes

Number of connections

  • ● overall

16; dynamically

16; dynamically

16; dynamically

Test commissioning functions

Status/control

  • ● Status/control variable

Yes

Yes

Yes

  • ● Variables

Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters

Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters

Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters

Forcing

  • ● Forcing

Yes

Yes

Yes

Diagnostic buffer

  • ● present

Yes

Yes

Yes

Traces

  • ● Number of configurable Traces

2; Up to 512 KB of data per trace are possible

2; Up to 512 KB of data per trace are possible

2; Up to 512 KB of data per trace are possible

Integrated Functions

Number of counters

6

6

6

Counting frequency (counter) max.

100kHz

100kHz

100kHz

Frequency measurement

Yes

Yes

Yes

controlled positioning

Yes

Yes

Yes

Number of position-controlled positioning axes, max.

8

8

8

Number of positioning axes via pulse-direction interface

Up to 4 with SB 1222

Up to 4 with SB 1222

PID controller

Yes

Yes

Yes

Number of alarm inputs

4

4

4

Potential separation

Potential separation digital inputs

  • ● Potential separation digital inputs

500V AC for 1 minute

500V AC for 1 minute

500V AC for 1 minute

  • ● between the channels, in groups of

1

1

1

Potential separation digital outputs

  • ● Potential separation digital outputs

Relays

Relays

Relays

  • ● between the channels

No

No

No

  • ● between the channels, in groups of

2

2

2

EMC

Interference immunity against discharge of static electricity

  • ● Interference immunity against discharge of static electricity acc. to IEC 61000-4-2

Yes

Yes

Yes

  • — Test voltage at air discharge

8kV

8kV

8kV

  • — Test voltage at contact discharge

6kV

6kV

6kV

Interference immunity to cable-borne interference

  • ● Interference immunity on supply lines acc. to IEC 61000-4-4

Yes

Yes

Yes

  • ● Interference immunity on signal cables acc. to IEC 61000-4-4

Yes

Yes

Yes

Interference immunity against voltage surge

  • ● on the supply lines acc. to IEC 61000-4-5

Yes

Yes

Yes

Interference immunity against conducted variable disturbance induced by high-frequency fields

  • ● Interference immunity against high-frequency radiation acc. to IEC 61000-4-6

Yes

Yes

Yes

Emission of radio interference acc. to EN 55 011

  • ● Limit class A, for use in industrial areas

Yes; Group 1

Yes; Group 1

Yes; Group 1

  • ● Limit class B, for use in residential areas

Yes; When appropriate measures are used to ensure compliance with the limits for Class B according to EN 55011

Yes; When appropriate measures are used to ensure compliance with the limits for Class B according to EN 55011

Yes; When appropriate measures are used to ensure compliance with the limits for Class B according to EN 55011

Degree and class of protection

Degree of protection acc. to EN 60529

  • ● IP20

Yes

Yes

Yes

Standards, approvals, certificates

CE mark

Yes

Yes

Yes

Ambient conditions

Free fall

  • ● Fall height, max.

0.3m; five times, in product package

0.3m; five times, in product package

0.3m; five times, in product package

Ambient temperature during operation

  • ● min.

-20C; = Tmin; Startup @ 0 C

-40C; = Tmin; Startup @ -25 C

-40C; = Tmin; Startup @ -25 C

  • ● max.

60C; Number of simultaneously activated inputs or outputs 7 or 5 (no adjacent points) at 60 C horizontal or 50 C vertical, 14 or 10 at 55 C horizontal or 45 C vertical

60C; = Tmax; Tmax > +55 C number of simultaneously switched-on digital inputs 7, digital outputs 5, analog inputs 2, analog outputs 2 (no adjacent points) with horizontal mounting position

70C; = Tmax; Tmax > +55 C number of simultaneously switched-on digital inputs 7, digital outputs 5, analog inputs 2, analog outputs 2 (no adjacent points) with horizontal mounting position; Tmax > +60 C number of simultaneously switched-on digital inputs 7, digital outputs 5, analog inputs 1, analog outputs 1 (no adjacent points) with horizontal mounting position

Ambient temperature during storage/transportation

  • ● min.

-40C

-40C

-40C

  • ● max.

70C

70C

70C

Altitude during operation relating to sea level

  • ● Ambient air temperature-barometric pressure-altitude

Tmin ... Tmax at 1 080 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax - 20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m); from 2 000 m max. 132 V AC

Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)

Tmin ... Tmax at 1 080 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax - 20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m); from 2 000 m max. 132 V AC

Relative humidity

  • ● With condensation, tested in accordance with IEC 60068-2-38, max.

100%; RH incl. condensation/frost (no commissioning under condensation conditions)

100%; RH incl. condensation/frost (no commissioning under condensation conditions)

100%; RH incl. condensation/frost (no commissioning under condensation conditions)

Vibrations

  • ● Vibration resistance during operation acc. to IEC 60068-2-6

2 g (m/s) wall mounting, 1 g (m/s) DIN rail

2 g (m/s) wall mounting, 1 g (m/s) DIN rail

2 g (m/s) wall mounting, 1 g (m/s) DIN rail

  • ● Operation, tested according to IEC 60068-2-6

Yes

Yes

Yes

Shock testing

  • ● tested according to IEC 60068-2-27

Yes; IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms

Yes; IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms

Yes; IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms

Use in stationary industrial systems

  • — to biologically active substances according to EN 60721-3-3

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request

  • — to chemically active substances according to EN 60721-3-3

Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

  • — to mechanically active substances according to EN 60721-3-3

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!

Programming

Programming language

  • — LAD

Yes

Yes

Yes

  • — FBD

Yes

Yes

Yes

  • — SCL

Yes

Yes

Yes

Cycle time monitoring

  • ● adjustable

Yes

Yes

Yes

Dimensions

Width

130mm

130mm

130mm

Height

100mm

100mm

100mm

Depth

75mm

75mm

75mm

Weights

Weight, approx.

585g

585g

585g
skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
DENDOR

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS -

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK -

  © " " 2007-2022
  (4872) 700-366  skenergo@mail.ru 		.