A comprehensive range of accessories is available for the SIDOOR systems. This is necessary to ensure low-noise operation of the door by the controller.

Accessories for SIDOOR DC and EC geared motors

Rubber-metal anti-vibration mount

To ensure low-noise door operation, the SIDOOR geared motors are integrated in the door system using rubber-metal anti-vibration mounts.

• Rubber-metal anti-vibration mount 6FB1104‑0AT02‑0AD0 for SIDOOR M3 and SIDOOR MDG180 DC geared motors (also for EN 45545-2) and SIDOOR MEG251 EC geared motors (door weights up to 250 kg)
• Rubber-metal anti-vibration mount 6FB1104‑0AT01‑0AD0 for SIDOOR M4 DC geared motors (door weights up to 400 kg)

Rubber-metal anti-vibration mount 6FB1104‑0AT02‑0AD0

Rubber-metal anti-vibration mount 6FB1104‑0AT01‑0AD0

Mounting bracket

Two different mounting brackets are available with elongated holes:

• Mounting bracket 6FB1104‑0AT01‑0AS0 for SIDOOR M3 and SIDOOR MDG180 DC geared motors (also for EN 45545-2) and SIDOOR MEG251 EC geared motors for flexible accommodation of the rubber-bonded metal.
• Mounting bracket 6FB1104‑0AT02‑0AS0 for the deflector unit, this enables the toothed belt to be set to the required belt tension.

Mounting bracket 6FB1104‑0AT01‑0AS0 for mounting the geared motor

Mounting bracket 6FB1104‑0AT02‑0AS0 for the deflector unit

Door clutch holder

The door clutch holder 6FB1104‑0AT01‑0CP0 serves to connect the respective door leaf by means of a toothed belt while also functioning as a toothed-belt lock. One door clutch holder per door leaf is required. The toothed-belt lock can accommodate both open ends of the toothed belt.

Door clutch holder 6FB1104‑0AT01‑0CP0 (packaging size = 1 unit)

Deflector unit

The deflector unit 6FB1104‑0AT03‑0AS0 contains an embedded belt pulley which can be mounted on the door system.

The STS toothed belt is redirected via this deflector unit.

Deflector unit 6FB1104‑0AT03‑0AS0

STS toothed belt

The door system is moved between the end positions of the door using the STS toothed belt 6FB1104‑0AT0.‑0AB0. Two different toothed belt lengths are available.

Toothed belt 6FB1104‑0AT01‑0AB0, length 4 m

Toothed belt 6FB1104‑0AT02‑0AB0, length 45 m

Accessories for the SIDOOR MED280 EC direct drive, for the controller for the SIDOOR ATE530S/ATE531S platform screen door drive

Motor holder

• Motor holder 6FB1104-0AT03-0AD0 for accommodation of the SIDOOR MED280 direct drive.

SIDOOR motor holder

Mounting bracket

• For mounting the SIDOOR motor holder 6FB1104-0AT01-0AS0
  Identical to the mounting bracket 6FB1104‑0AT01‑0AS0 for DC geared motors.

Mounting bracket for geared motor

• With tensioning device for mounting the deflector unit and setting the toothed belt to the required tension (large) 6FB1104-0AT05-0AS4

SIDOOR mounting bracket, large

• With tensioning device for mounting the deflector unit and setting the toothed belt to the required tension (small) 6FB1104-0AT05-0AS5

SIDOOR mounting bracket, small

Door clutch holder

• For attaching both ends of the toothed belt and connecting the respective door panel to the toothed belt,
  width 20 mm, 6FB1104-0AT05-0AS1

SIDOOR door clutch holder

Deflector unit

• For attaching the SIDOOR toothed belt and fixing to the door 6FB1104-0AT07-0AS0

SIDOOR deflector unit

STD toothed belt

• As a connection between the door system and the end positions of the door,
  toothed belt width 20 mm. Length 4 m, 6FB1104-0AT05-0AB0

SIDOOR toothed belt, small

• Toothed belt width 20 mm. Length 45 m 6FB1104-0AT06-0AB1

SIDOOR toothed belt, large