SM 522 digital output modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SM 522 digital output modules

| | | | | | |

Article number	6ES7522-1BH01-0AB0	6ES7522-1BL01-0AB0	6ES7522-1BF00-0AB0	6ES7522-5EH00-0AB0
	S7-1500, DQ 16X24V DC/0.5A HF	S7-1500, DQ 32X24VDC/0.5A HF	S7-1500, DQ 8X24VDC/2A HF	S7-1500, DQ 16X24...48VUC/125VDC/0.5A ST
General information
Product type designation	DQ 16x24VDC/0.5A HF	DQ 32x24VDC/0.5A HF	DQ 8x24VDC/2A HF	DQ 16x24 ... 48 V UC/125 V DC/0.5 A ST
HW functional status	FS01	FS01	FS01	FS01
Firmware version	V1.0.0	V1.0.0	V2.1.0	V1.0.0
в—Џ FW update possible	Yes		Yes	Yes
Product function
в—Џ I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
Engineering with
в—Џ STEP 7 TIA Portal configurable/integrated as of version	V13 SP1 / -	V13 SP1 / -	V13 SP1 / -	V13 SP1 / -
в—Џ STEP 7 configurable/integrated as of version			V5.5 SP3 / -	V5.5 SP3 / -
в—Џ PROFIBUS as of GSD version/GSD revision	V1.0 / V5.1	V1.0 / V5.1	V1.0 / V5.1	V1.0 / V5.1
в—Џ PROFINET as of GSD version/GSD revision	V2.3 / -	V2.3 / -	V2.3 / -	V2.3 / -
Operating mode
в—Џ DQ	Yes	Yes	Yes	Yes
в—Џ DQ with energy-saving function	No	No	Yes; with an application	No
в—Џ PWM	No	No	Yes	No
в—Џ Oversampling	No	No	No	No
в—Џ MSO	Yes	Yes	Yes	Yes
Supply voltage
Rated value (DC)	24 V	24 V	24 V
permissible range, lower limit (DC)	20.4 V	20.4 V	20.4 V
permissible range, upper limit (DC)	28.8 V	28.8 V	28.8 V
Reverse polarity protection	Yes; through internal protection with 7 A per group	Yes; through internal protection with 7 A per group	Yes; through internal protection with 10 A per group
Input current
Current consumption, max.	30 mA	60 mA	40 mA; 20 mA per group, no output is activated.
Output voltage
Rated value (DC)	24 V	24 V	24 V	24 V; 48 V, 125 V
Rated value (AC)				24 V; 48 V (50 - 60 Hz)
Power
Power available from the backplane bus	1.1 W	1.1 W	0.9 W	2 W
Power loss
Power loss, typ.	2 W	3.5 W	5.6 W; 6.8 W for PWM operation	3.8 W
Digital outputs
Type of digital output	Transistor	Transistor	Transistor	Transistor
Number of digital outputs	16	32	8	16
Current-sinking				Yes
Current-sourcing	Yes	Yes	Yes	Yes
Short-circuit protection	Yes; Clocked electronically	Yes; Clocked electronically	Yes
в—Џ Response threshold, typ.	1 A	1 A	3 A
Limitation of inductive shutdown voltage to	L+ (-53 V)	L+ (-53 V)	-17 V	200 V (suppressor diode)
Controlling a digital input	Yes	Yes	Yes	Yes
Digital output functions, parameterizable
в—Џ Freely usable digital output			Yes
в—Џ PWM output			Yes
вЂ” Number, max.			2
вЂ” Cycle duration, parameterizable			Yes; 2 ... 100 ms continuous
вЂ” ON period, min.			0 %
вЂ” ON period, max.			100 %
вЂ” Resolution of the duty cycle			0.1 %
вЂ” Minimum pulse duration			300 µs
Switching capacity of the outputs
в—Џ with resistive load, max.	0.5 A	0.5 A		0.5 A
в—Џ on lamp load, max.	5 W	5 W	10 W	40 W; At 125 V DC, 10 W at 48 V UC, 5 W at 24 V UC
Load resistance range
в—Џ lower limit	48 в„¦	48 в„¦	12 в„¦
в—Џ upper limit	12 kв„¦	12 kв„¦	4 kв„¦
Output voltage
в—Џ for signal "1", min.	L+ (-0.8 V)	L+ (-0.8 V)	L+ (-0.8 V)	L+ (-1.0 V)
Output current
в—Џ for signal "1" rated value	0.5 A	0.5 A	2 A	0.5 A
в—Џ for signal "1" permissible range, max.	0.5 A	0.5 A	2.4 A; Note derating specification for PWM operation	0.6 A
в—Џ for signal "0" residual current, max.	0.5 mA	0.5 mA	0.5 mA
Output delay with resistive load
в—Џ "0" to "1", typ.			80 µs
в—Џ "0" to "1", max.	100 µs	100 µs	100 µs	5 ms
в—Џ "1" to "0", typ.			300 µs
в—Џ "1" to "0", max.	500 µs	500 µs	500 µs	5 ms
Parallel switching of two outputs
в—Џ for logic links	Yes	Yes	Yes	Yes
в—Џ for uprating	No	No	No	No
в—Џ for redundant control of a load	Yes	Yes	Yes	Yes
Switching frequency
в—Џ with resistive load, max.	100 Hz	100 Hz	100 Hz; With PWM operation: 500 Hz	25 Hz
в—Џ with inductive load, max.	0.5 Hz; According to IEC 60947-5-1, DC-13	0.5 Hz; According to IEC 60947-5-1, DC-13	0.5 Hz; According to IEC 60947-5-1, DC-13; max. 500 Hz with PWM operation only with external circuit; see additional description in the manual	0.5 Hz
в—Џ on lamp load, max.	10 Hz	10 Hz	10 Hz	10 Hz
Total current of the outputs
в—Џ Current per channel, max.	0.5 A; see additional description in the manual	0.5 A; see additional description in the manual	2 A; see additional description in the manual	0.5 A
в—Џ Current per group, max.	4 A; see additional description in the manual	4 A; see additional description in the manual	8 A; see additional description in the manual	0.5 A
в—Џ Current per module, max.	8 A; see additional description in the manual	16 A; see additional description in the manual	16 A; see additional description in the manual	8 A
Cable length
в—Џ shielded, max.	1 000 m	1 000 m	1 000 m	1 000 m
в—Џ unshielded, max.	600 m	600 m	600 m	600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)	Yes	Yes	No	No
Execution and activation time (TCO), min.	70 µs	70 µs
Bus cycle time (TDP), min.	250 µs	250 µs
Interrupts/diagnostics/status information
Diagnostics function	Yes	Yes	Yes	No
Substitute values connectable	Yes	Yes	Yes	Yes
Alarms
в—Џ Diagnostic alarm	Yes	Yes	Yes	No
Diagnostic messages
в—Џ Monitoring the supply voltage	Yes	Yes	Yes	No
в—Џ Wire-break	Yes	Yes	No	No
в—Џ Short-circuit	Yes	Yes	Yes	No
в—Џ Group error	Yes	Yes	Yes
Diagnostics indication LED
в—Џ RUN LED	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED
в—Џ ERROR LED	Yes; Red LED	Yes; Red LED	Yes; Red LED	Yes; Red LED
в—Џ Monitoring of the supply voltage (PWR-LED)	Yes; Green LED	Yes; Green LED	Yes; Green LED	No
в—Џ Channel status display	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED
в—Џ for channel diagnostics	Yes; Red LED	Yes; Red LED	Yes; Red LED	No
в—Џ for module diagnostics	Yes; Red LED	Yes; Red LED	Yes; Red LED	Yes; Red LED
Potential separation
Potential separation channels
в—Џ between the channels	No	No	No	Yes
в—Џ between the channels, in groups of	8	8	4	1
в—Џ between the channels and backplane bus	Yes	Yes	Yes	Yes
Permissible potential difference
between different circuits				125 V DC/48 V AC
Isolation
Isolation tested with	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)	2 000 V DC
Ambient conditions
Ambient temperature during operation
в—Џ horizontal installation, min.	0 °C			0 °C
в—Џ horizontal installation, max.	60 °C			60 °C
в—Џ vertical installation, min.	0 °C			0 °C
в—Џ vertical installation, max.	60 °C			40 °C
Decentralized operation
Prioritized startup	Yes	Yes	Yes	Yes
Dimensions
Width	35 mm	35 mm	35 mm	35 mm
Height	147 mm	147 mm	147 mm	147 mm
Depth	129 mm	129 mm	129 mm	129 mm
Weights
Weight, approx.	230 g	280 g	240 g	230 g

Article number	6ES7522-5HF00-0AB0	6ES7522-5HH00-0AB0	6ES7522-5FF00-0AB0	6ES7522-5FH00-0AB0
	S7-1500, DQ 8X230VAC/5A ST (RELAY)	S7-1500, DQ 16X230VAC/2A ST (RELAY)	S7-1500, DQ 8X230VAC/2A ST (TRIAC)	S7-1500, DQ 16X230VAC/1A ST (TRIAC)
General information
Product type designation	DQ 8x230 V AC/5 A ST (relay)	DQ 16x 230 V AC/2 A ST (relay)	DQ 8x230 V AC/2A ST (triac)	DQ 16x230VAC/1A ST (Triac)
HW functional status	FS01	FS01	FS01	FS01
Firmware version	V2.0.0	V1.0.0	V2.0.0	V1.0.0
в—Џ FW update possible	Yes	Yes	Yes	Yes
Product function
в—Џ I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
Engineering with
в—Џ STEP 7 TIA Portal configurable/integrated as of version	V12 / V12	V13 SP1 / -	V12 / V12	V13 SP1 / -
в—Џ STEP 7 configurable/integrated as of version	V5.5 SP3 / -	V5.5 SP3 / -	V5.5 SP3 / -	V5.5 SP3 / -
в—Џ PROFIBUS as of GSD version/GSD revision	V1.0 / V5.1	V1.0 / V5.1	V1.0 / V5.1	V1.0 / V5.1
в—Џ PROFINET as of GSD version/GSD revision	V2.3 / -	V2.3 / -	V2.3 / -	V2.3 / -
Operating mode
в—Џ DQ	Yes	Yes	Yes	Yes
в—Џ DQ with energy-saving function	No	No	No	No
в—Џ PWM	No	No	No	No
в—Џ Oversampling	No	No	No	No
в—Џ MSO	Yes	Yes	Yes	Yes
Supply voltage
Rated value (DC)	24 V	24 V
permissible range, lower limit (DC)	20.4 V	20.4 V
permissible range, upper limit (DC)	28.8 V	28.8 V
Reverse polarity protection	Yes	Yes
Input current
Current consumption, max.	80 mA	150 mA
Output voltage
Rated value (AC)	230 V; 24 V DC to 120 V DC / 24 V AC to 230 V AC	230 V; 24 V DC to 120 V DC / 24 V AC to 230 V AC	230 V; 120/230 V AC, 50/60 Hz	230 V; 120/230 V AC, 50/60 Hz
Power
Power available from the backplane bus	0.8 W	0.8 W	0.9 W	1.2 W
Power loss
Power loss, typ.	5 W	5 W	10.8 W	11.1 W
Digital outputs
Type of digital output	Relays	Relays	Triac	Triac
Number of digital outputs	8	16	8	16
Current-sinking	Yes	Yes		Yes
Current-sourcing	Yes	Yes	Yes	Yes
Short-circuit protection	No	No	No	No
Controlling a digital input	possible	Yes
Switching capacity of the outputs
в—Џ with resistive load, max.			2 A	1 A
в—Џ on lamp load, max.	1 500 W; 10 000 operating cycles	50 W (230 V AC), 5 W (24 V DC)	50 W	50 W
в—Џ Low energy/fluorescent lamps with electronic control gear	10x 58 W (25 000 operating cycles)
в—Џ Fluorescent tubes, conventionally compensated	1x 58 W (25 000 operating cycles)
в—Џ Fluorescent tubes, uncompensated	10x 58 W (25 000 operating cycles)
Output voltage
в—Џ for signal "1", min.			L1 (-1.5 V) at maximum output current; L1 (-8.5 V) at minimum output current	L1 (-1.5 V) at maximum output current; L1 (-8.5 V) at minimum output current
Output current
в—Џ for signal "1" rated value	5 A	2 A	2 A	1 A
в—Џ for signal "1" permissible range, min.	5 mA; 10 V	10 mA; 10 V	10 mA	10 mA
в—Џ for signal "1" permissible range, max.	8 A; thermal continuous current	2 A; thermal continuous current	15 A; max. 1 AC cycle	15 A; max. 1 AC cycle
в—Џ for signal "0" residual current, max.	0 A	0 A	2 mA	2 mA
Output delay with resistive load
в—Џ "0" to "1", max.			1 AC cycle	1 AC cycle
в—Џ "1" to "0", max.			1 AC cycle	1 AC cycle
Parallel switching of two outputs
в—Џ for logic links	Yes	Yes	No	No
в—Џ for uprating	No	No	No	No
в—Џ for redundant control of a load	Yes	Yes	Yes	Yes
Switching frequency
в—Џ with resistive load, max.	2 Hz	1 Hz	10 Hz	10 Hz
в—Џ with inductive load, max.	0.5 Hz	0.5 Hz	0.5 Hz	0.5 Hz
в—Џ on lamp load, max.	2 Hz	1 Hz	1 Hz	1 Hz
Total current of the outputs
в—Џ Current per channel, max.	8 A; see additional description in the manual	2 A; see additional description in the manual	2 A; see additional description in the manual	1 A; see additional description in the manual
в—Џ Current per group, max.	8 A; see additional description in the manual	4 A; see additional description in the manual	2 A; see additional description in the manual	2 A; see additional description in the manual
в—Џ Current per module, max.	64 A; see additional description in the manual	32 A; see additional description in the manual	10 A; see additional description in the manual	10 A; see additional description in the manual
Relay outputs
в—Џ Number of relay outputs	8	16
в—Џ Rated supply voltage of relay coil L+ (DC)	24 V	24 V
в—Џ Current consumption of relays (coil current of all relays), typ.	80 mA	150 mA
в—Џ external protection for relay outputs	With miniature circuit breaker with characteristic B for: cos П† 1.0: 600 A cos П† 0.5 ... 0.7: 900 A with 8 A Diazed fuse: 1000 A	Miniature circuit breaker B10 / B16
в—Џ Contact connection (internal)	No	No
в—Џ Size of motor starters according to NEMA, max.	5	5
в—Џ Number of operating cycles, max.	4 000 000; see additional description in the manual	see additional description in the manual
в—Џ Relay approved acc. to UL 508	Yes; 250 V AC/5 A g.p.; 120 V AC TV-4 tungsten; A300, R300	No
Switching capacity of contacts
вЂ” with inductive load, max.	see additional description in the manual	2 A; see additional description in the manual
вЂ” with resistive load, max.	see additional description in the manual	2 A; see additional description in the manual
Triac outputs
в—Џ Size of motor starters according to NEMA, max.			5	4
Cable length
в—Џ shielded, max.	1 000 m	1 000 m	1 000 m	1 000 m
в—Џ unshielded, max.	600 m	600 m	600 m	600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No	No	No	No
Interrupts/diagnostics/status information
Diagnostics function	Yes	Yes	No	No
Substitute values connectable	Yes	Yes	Yes	Yes
Alarms
в—Џ Diagnostic alarm	Yes	Yes	No	No
Diagnostic messages
в—Џ Monitoring the supply voltage	Yes	Yes	No	No
в—Џ Wire-break	No	No	No	No
в—Џ Short-circuit	No	No	No	No
Diagnostics indication LED
в—Џ RUN LED	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED
в—Џ ERROR LED	Yes; Red LED	Yes; Red LED	Yes; Red LED	Yes; Red LED
в—Џ Monitoring of the supply voltage (PWR-LED)	Yes; Green LED	Yes; Green LED	No	No
в—Џ Channel status display	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED
в—Џ for channel diagnostics	No	No	No	No
в—Џ for module diagnostics	Yes; Red LED	Yes; Red LED	Yes; Red LED	Yes; Red LED
Potential separation
Potential separation channels
в—Џ between the channels	Yes; Switching of different phases permitted	No	Yes	No
в—Џ between the channels, in groups of	1	2	1	2
в—Џ between the channels and backplane bus	Yes	Yes	Yes	Yes
в—Џ Between the channels and load voltage L+	Yes	Yes
в—Џ Between the channels and load voltage L1			Yes
Permissible potential difference
between different circuits	250 V AC between the channels and the supply voltage L+; 250 V AC between the channels and the backplane bus; 500 V AC between the channels	250 V AC between the channels and the supply voltage L+; 250 V AC between the channels and the backplane bus; 500 V AC between the channels	250 V AC between the channels and the backplane bus; 500 V AC between the channels	250 V AC between the channels and the backplane bus; 500 V AC between the channels
Isolation
Isolation tested with	Between channels: 3 100 V DC; between channels backplane bus: 3 100 V DC; between L+ and backplane bus: 707 V DC (type test)	Between channels: 3 100 V DC; between channels backplane bus: 3 100 V DC; between L+ and backplane bus: 707 V DC (type test)	3 100 V DC	3 100 V DC
Ambient conditions
Ambient temperature during operation
в—Џ horizontal installation, min.	0 °C	0 °C	0 °C	0 °C
в—Џ horizontal installation, max.	60 °C	60 °C	60 °C	60 °C
в—Џ vertical installation, min.	0 °C	0 °C	0 °C	0 °C
в—Џ vertical installation, max.	40 °C	40 °C	40 °C	60 °C
Decentralized operation
Prioritized startup	Yes	Yes	Yes	Yes
Dimensions
Width	35 mm	35 mm	35 mm	35 mm
Height	147 mm	147 mm	147 mm	147 mm
Depth	129 mm	129 mm	129 mm	129 mm
Weights
Weight, approx.	350 g	350 g	290 g	310 g

Article number	6ES7522-1BH10-0AA0	6ES7522-1BL10-0AA0
	S7-1500, DQ 16X24VDC/0.5A BA	S7-1500, DQ 32X24VDC/0.5A BA
General information
Product type designation	DQ 16x24VDC/0.5A BA	DQ 32x24VDC/0.5A BA
HW functional status	FS01	FS01
Firmware version	V1.0.0	V1.0.0
в—Џ FW update possible	Yes	Yes
Product function
в—Џ I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
Engineering with
в—Џ STEP 7 TIA Portal configurable/integrated as of version	V13 / V13	V13 / V13
в—Џ STEP 7 configurable/integrated as of version	V5.5 SP3 / -	V5.5 SP3 / -
в—Џ PROFIBUS as of GSD version/GSD revision	V1.0 / V5.1	V1.0 / V5.1
в—Џ PROFINET as of GSD version/GSD revision	V2.3 / -	V2.3 / -
Operating mode
в—Џ DQ	Yes	Yes
в—Џ DQ with energy-saving function	No	No
в—Џ PWM	No	No
в—Џ Oversampling	No	No
в—Џ MSO	Yes	Yes
Supply voltage
Rated value (DC)	24 V	24 V
permissible range, lower limit (DC)	20.4 V	20.4 V
permissible range, upper limit (DC)	28.8 V	28.8 V
Reverse polarity protection	Yes; through internal protection with 7 A per group	Yes; through internal protection with 7 A per group
Input current
Current consumption, max.	30 mA	60 mA
Output voltage
Rated value (DC)	24 V	24 V
Power
Power available from the backplane bus	1.15 W	1.15 W
Power loss
Power loss, typ.	2.2 W	3.8 W
Digital outputs
Type of digital output	Transistor	Transistor
Number of digital outputs	16	32
Current-sourcing	Yes	Yes
Short-circuit protection	Yes	Yes
в—Џ Response threshold, typ.	1 A	1 A
Limitation of inductive shutdown voltage to	L+ (-53 V)	L+ (-53 V)
Controlling a digital input	Yes	Yes
Switching capacity of the outputs
в—Џ with resistive load, max.	0.5 A	0.5 A
в—Џ on lamp load, max.	5 W	5 W
Load resistance range
в—Џ lower limit	48 в„¦	48 в„¦
в—Џ upper limit	12 kв„¦	12 kв„¦
Output voltage
в—Џ for signal "1", min.	L+ (-0.8 V)	L+ (-0.8 V)
Output current
в—Џ for signal "1" rated value	0.5 A	0.5 A
в—Џ for signal "1" permissible range, max.	0.5 A	0.5 A
в—Џ for signal "0" residual current, max.	0.5 mA	0.5 mA
Output delay with resistive load
в—Џ "0" to "1", max.	100 µs	100 µs
в—Џ "1" to "0", max.	500 µs	500 µs
Parallel switching of two outputs
в—Џ for logic links	Yes	Yes
в—Џ for uprating	No	No
в—Џ for redundant control of a load	Yes	Yes
Switching frequency
в—Џ with resistive load, max.	100 Hz	100 Hz
в—Џ with inductive load, max.	0.5 Hz; According to IEC 60947-5-1, DC-13	0.5 Hz; According to IEC 60947-5-1, DC-13
в—Џ on lamp load, max.	10 Hz	10 Hz
Total current of the outputs
в—Џ Current per channel, max.	0.5 A; see additional description in the manual	0.5 A; see additional description in the manual
в—Џ Current per group, max.	4 A; see additional description in the manual	4 A; see additional description in the manual
в—Џ Current per module, max.	8 A; see additional description in the manual	16 A; see additional description in the manual
Cable length
в—Џ shielded, max.	1 000 m	1 000 m
в—Џ unshielded, max.	600 m	600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No	No
Interrupts/diagnostics/status information
Diagnostics function	No	No
Substitute values connectable	No	No
Alarms
в—Џ Diagnostic alarm	No	No
Diagnostic messages
в—Џ Monitoring the supply voltage	No	No
в—Џ Wire-break	No	No
в—Џ Short-circuit	No	No
в—Џ Group error	No	No
Diagnostics indication LED
в—Џ RUN LED	Yes; Green LED	Yes; Green LED
в—Џ ERROR LED	Yes; Red LED	Yes; Red LED
в—Џ Monitoring of the supply voltage (PWR-LED)	Yes; Green LED	Yes; Green LED
в—Џ Channel status display	Yes; Green LED	Yes; Green LED
в—Џ for channel diagnostics	No	No
в—Џ for module diagnostics	No	No
Potential separation
Potential separation channels
в—Џ between the channels	No	No
в—Џ between the channels, in groups of	8	8
в—Џ between the channels and backplane bus	Yes	Yes
Isolation
Isolation tested with	707 V DC (type test)	707 V DC (type test)
Decentralized operation
Prioritized startup	Yes	Yes
Dimensions
Width	25 mm	25 mm
Height	147 mm	147 mm
Depth	129 mm	129 mm
Weights
Weight, approx.	230 g	280 g
Other
Note:	Supplied incl. 40-pole push-in front connectors	Supplied incl. 40-pole push-in front connectors

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания