CM 1542-5 . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на CM 1542-5

| | | | | | | | |

Article number		6GK7542-5DX00-0XE0
Product type designation		CM 1542-5
Transmission rate
Transfer rate
в—Џ at the 1st interface acc. to PROFIBUS		9.6 kbit/s ... 12 Mbit/s
Interfaces
Number of interfaces acc. to Industrial Ethernet		0
Number of electrical connections
в—Џ at the 1st interface acc. to PROFIBUS		1
Type of electrical connection
в—Џ at the 1st interface acc. to PROFIBUS		9-pin Sub-D socket (RS485)
Supply voltage, current consumption, power loss
Type of voltage of the supply voltage		DC
Supply voltage 1 from backplane bus		15 V
Relative symmetrical tolerance at DC
в—Џ at 15 V		3 %
Consumed current
в—Џ from backplane bus at DC at 15 V typical		0.2 A
Power loss [W]		3 W
Permitted ambient conditions
Ambient temperature
в—Џ for vertical installation during operation		0 ... 40 °C
в—Џ for horizontally arranged busbars during operation		0 ... 60 °C
в—Џ during storage		-40 ... +70 °C
в—Џ during transport		-40 ... +70 °C
Relative humidity at 25 °C without condensation during operation maximum		95 %
Protection class IP		IP20
Design, dimensions and weight
Module format		Compact module S7-1500 single width
Width		35 mm
Height		142 mm
Depth		129 mm
Net weight		0.4 kg
Mounting type
в—Џ S7-1500 rail mounting		Yes
Product properties, functions, components general
Number of units
в—Џ per CPU maximum		8
в—Џ Note		depending on CPU type
Performance data open communication
Number of possible connections for open communication by means of SEND/RECEIVE blocks maximum		30
Amount of data
в—Џ as user data per connection for open communication by means of SEND/RECEIVE blocks maximum		240 byte
Performance data PROFIBUS DP
Service as DP master
в—Џ DPV1		Yes
Number of DP slaves on DP master usable		125
Amount of data
в—Џ of the address area of the inputs as DP master total		8 192 byte
в—Џ of the address area of the outputs as DP master total		8 192 byte
в—Џ of the address area of the inputs per DP slave		244 byte
в—Џ of the address area of the outputs per DP slave		244 byte
Service as DP slave
в—Џ DPV0		Yes
в—Џ DPV1		Yes
Amount of data
в—Џ of the address area of the inputs as DP slave total		240 byte
в—Џ of the address area of the outputs as DP slave total		240 byte
Performance data S7 communication
Number of possible connections for S7 communication
в—Џ maximum		48
в—Џ Note		depending on the system upper limit
Performance data multi-protocol mode
Number of active connections with multi-protocol mode		48
Performance data telecontrol
Protocol is supported
в—Џ TCP/IP		No
Configuration software
в—Џ required		STEP 7 Professional V12 (TIA Portal) or higher
Identification & maintenance function
в—Џ I&M0 - device-specific information		Yes
в—Џ I&M1 – higher-level designation/location designation		Yes
Product functions Diagnosis
Product function Web-based diagnostics		Yes; yes, via S7-1500 CPU
Product functions Time
Product function pass on time synchronization		Yes