ET 200SP BusAdapter “BA-Send"

• Inserted immediately next to the head-end station on a “BU-Send” BaseUnit.
• Can be used on interface modules in "Standard" function class or above.
• Can be used on CPU 1510SP (F) and CPU 1512SP (F), as well as Open Controller 1515 SP2.

SIMATIC BusAdapters

• Are plugged onto the device with SIMATIC BusAdapter interface and can be equipped with an equipment labeling plate for identification of the equipment.
• BusAdapters with a copper interface can be used on all devices with a SIMATIC BusAdapter interface.
• BusAdapter with FOC interface can be used on selected devices with SIMATIC BusAdapter interface (e.g. ET 200SP interface module with High Feature function class or above, CPU 1512SP (F), etc.)
• Versions with two PN copper interfaces (RJ45 or FastConnect (FC)):
  • BA 2xRJ45 with 2 RJ45 sockets
  • BA 2xFC with 2 FastConnect connections

Versions with one or two PN fiber-optic cable (FOC) connections:

• BA 2xSCRJ with 2 SCRJ sockets
  • BA SCRJ / RJ45 each with one SCRJ and one RJ45 socket (media converter)
  • BA SCRJ / FC with one SCRJ socket and one FastConnect connection (media converter)
  • BA 2xLC with two LC (Lucent Connector) sockets
  • BA LC / RJ45 each with one LC and one RJ45 socket (media converter)
  • BA LC / FC with one LC socket and one FastConnect connection (media converter)

Assembly

FastConnect (FC)
Using the FastConnect stripping tool, the outer sheath and braided shielding can be quickly and conveniently removed from Industrial Ethernet FastConnect cables in one simple operation. The detached PN bus cable is connected directly to the FC connector by means of the FastConnect terminals – in a similar way to the PROFIBUS connector, tried and tested in millions of applications. It is then only necessary to close the cover and lock it with the slider (no tools required).

FastConnect stripping tool

RJ45
In principle, all industry standard RJ45 Ethernet connectors can be used here. If the PN cable is to be assembled on site, the FastConnect stripping tool can be also be used here in connection with the "Industrial Ethernet FastConnect RJ45 Plug 180" connector.

IE FC RJ45 Plug 180

SCRJ
POF and PCF fiber-optic cables can be assembled easily on site using the PROFINET-compatible SC RJ-connectors. The SC RJ connector used for both cable versions is a connector that secures the fibers and the strain relief elements by means of a clamping mechanism in the connector (screwed).

SC RJ connector (PCF)

POF cables
With the aid of the IE Termination Kit SC RJ POF Plug, cable lengths specific to the plant requirements can be assembled quickly and easily using the "SC RJ POF Plug". In the case of the POF cables, the fibers protruding at the connector are trimmed to length with side cutters and then polished.

IE Termination Kit SC RJ POF Plug

PCF cables
With the aid of the IE Termination Kit SC RJ PCF Plug, cable lengths specific to the plant requirements can be assembled quickly and easily using the "SC RJ POF Plug". In the case of the PCF cables, the fibers protruding from the connector are broken with a special tool after fixing in the connector.

IE Termination Kit SC RJ PCF Plug

LC
LC connectors are extremely compact next-generation "small form factor" (SFF) connectors. The connector is available in a duplex version and is interlocked by means of the push/pull system. With the aid of the FC FO Termination Kit (LC), cable lengths specific to the plant requirements can be assembled quickly and easily using the "FC FO LC Plug" LC connector. No specially trained personnel or expensive tools are necessary. Alternatively, pre-assembled glass fiber cables are offered.

FC FO LC Plug

FC FO Termination Kit (LC)