Analog input modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Analog input modules

| | | | | | |

Article number	6ES7134-6GF00-0AA1	6ES7134-6FB00-0BA1	6ES7134-6FF00-0AA1	6ES7134-6HD00-0BA1	6ES7134-6GB00-0BA1
	ET 200SP, AI 8XI 2-/4-WIRE BASIC	ET 200SP, AI 2XU STANDARD, PU 1	ET 200SP, AI 8XU BASIC	ET 200SP, AI 4XU/I 2-WIRE ST	ET 200SP, AI 2XI 2-/4-WIRE ST, PU 1
General information
Product type designation	AI 8xI 2-/4-wire BA	AI 2xU ST	AI 8xU BA	AI 4xU/I 2-wire ST	AI 2xI 2-/4-wire ST
Firmware version	V1.0	V1.0	V1.0	V1.1	V1.0
в—Џ FW update possible	Yes	Yes	Yes	Yes	Yes
usable BaseUnits	BU type A0, A1	BU type A0, A1	BU type A0, A1	BU type A0, A1	BU type A0, A1
Color code for module-specific color identification plate	CC01	CC00	CC02	CC03	CC05
Product function
в—Џ I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
в—Џ Measuring range scalable	No	No	No	No	No
Engineering with
в—Џ STEP 7 TIA Portal configurable/integrated as of version	V13 SP1	V13 SP1	V13 SP1	V11 SP2 / V13	V13 SP1
в—Џ STEP 7 configurable/integrated as of version	V5.5 SP3 / -	V5.5 SP3 / -	V5.5 SP3 / -	V5.5 SP3 / -	V5.5 SP3
в—Џ PCS 7 configurable/integrated as of version				V8.1 SP1
в—Џ PROFIBUS as of GSD version/GSD revision	GSD Revision 5	GSD Revision 5	GSD Revision 5	GSD Revision 5	GSD Revision 5
в—Џ PROFINET as of GSD version/GSD revision	GSDML V2.3	GSDML V2.3	GSDML V2.3	GSDML V2.3	V2.3 / -
Operating mode
в—Џ Oversampling	No	No	No	No	No
в—Џ MSI	No	No	No	No	No
CiR – Configuration in RUN
Reparameterization possible in RUN	Yes	Yes	Yes	Yes	Yes
Calibration possible in RUN	No	No	No	No	No
Supply voltage
Rated value (DC)	24 V	24 V	24 V	24 V	24 V
permissible range, lower limit (DC)	19.2 V	19.2 V	19.2 V	19.2 V	19.2 V
permissible range, upper limit (DC)	28.8 V	28.8 V	28.8 V	28.8 V	28.8 V
Reverse polarity protection	Yes	Yes	Yes	Yes	Yes
Input current
Current consumption, max.	25 mA; without sensor supply	37 mA	25 mA	37 mA; without sensor supply	45 mA; without sensor supply
24 V encoder supply
в—Џ 24 V	Yes	No		Yes	Yes
в—Џ Short-circuit protection	Yes			Yes	Yes
в—Џ Output current, max.	0.7 A; total current of all encoders/channels			20 mA; max. 50 mA per channel for a duration < 10 s	50 mA; Total current for both channels (two-wire)
Additional 24 V encoder supply
в—Џ 24 V		No			Yes
в—Џ Short-circuit protection					Yes; Module-wise
в—Џ Output current, max.					200 mA; Total current for both channels (four-wire)
Power loss
Power loss, typ.	0.7 W; Without encoder supply voltage	0.9 W	0.7 W	0.85 W; Without encoder supply voltage	1.1 W
Address area
Address space per module
в—Џ Address space per module, max.	16 byte	4 byte; + 1 byte for QI information	16 byte	8 byte; + 1 byte for QI information	4 byte; + 1 byte for QI information
Analog inputs
Number of analog inputs	8; Single-ended	2	8; Single-ended	4; Differential inputs	2
в—Џ For current measurement	8			4	2
в—Џ For voltage measurement		2	8	4
permissible input voltage for voltage input (destruction limit), max.		30 V	30 V	30 V
permissible input current for current input (destruction limit), max.	50 mA			50 mA	50 mA
Cycle time (all channels), min.	1 ms; per channel	500 µs	1 ms; per channel	Sum of the basic conversion times and additional processing times (depending on the parameterization of the active channels)	500 µs
Input ranges (rated values), voltages
в—Џ 0 to +10 V		Yes; 15 bit	Yes; 15 bit	Yes; 15 bit
в—Џ Input resistance (0 to 10 V)		180 kв„¦	100 kв„¦	120 kв„¦
в—Џ 1 V to 5 V		Yes; 15 bit		Yes; 15 bit
в—Џ Input resistance (1 V to 5 V)		180 kв„¦		120 kв„¦
в—Џ -10 V to +10 V		Yes; 16 bit incl. sign	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (-10 V to +10 V)		180 kв„¦	100 kв„¦	120 kв„¦
в—Џ -5 V to +5 V		Yes; 16 bit incl. sign		Yes; 16 bit incl. sign
в—Џ Input resistance (-5 V to +5 V)		180 kв„¦		120 kв„¦
Input ranges (rated values), currents
в—Џ 0 to 20 mA	Yes			Yes; 15 bit	Yes; 15 bit
в—Џ Input resistance (0 to 20 mA)	100 в„¦; 15 bit			100 в„¦; + approx. 0.7 V diode forward voltage	130 в„¦; 90 ohms with two wires
в—Џ -20 mA to +20 mA	Yes				Yes; 16 bit incl. sign
в—Џ Input resistance (-20 mA to +20 mA)	100 в„¦; 16 bit incl. sign				130 в„¦
в—Џ 4 mA to 20 mA	Yes			Yes; 15 bit	Yes; 15 bit
в—Џ Input resistance (4 mA to 20 mA)	100 в„¦; 15 bit			100 в„¦; + approx. 0.7 V diode forward voltage	130 в„¦; 90 ohms with two wires
Cable length
в—Џ shielded, max.	200 m	200 m	200 m	1 000 m; 200 m for voltage measurement	1 000 m
Analog value generation for the inputs
Measurement principle		Sigma Delta		integrating (Sigma-Delta)	Sigma Delta
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.	16 bit	16 bit	16 bit	16 bit	16 bit
в—Џ Integration time, parameterizable	Yes	Yes	Yes	Yes	Yes
в—Џ Interference voltage suppression for interference frequency f1 in Hz	16.67 / 50 / 60 / 4 800 (16.67 / 50 / 60)	16.6 / 50 / 60 Hz / off	16.67 / 50 / 60 / 4 800 (16.67 / 50 / 60)	16.6 / 50 / 60 Hz	16.6 / 50 / 60 Hz / off
в—Џ Conversion time (per channel)	180 / 60 / 50 / 0.625 (67.5 / 22.5 / 18.75) ms	50 ms @ 60 Hz, 60 ms @ 50 Hz, 180 ms @ 16.6 Hz, 250 µs without filter	180 / 60 / 50 / 0.625 (67.5 / 22.5 / 18.75) ms	180 / 60 / 50 ms	50 ms @ 60 Hz, 60 ms @ 50 Hz, 180 ms @ 16.6 Hz, 250 µs without filter
Smoothing of measured values
в—Џ Number of smoothing levels	4; None; 4/8/16 times	4	4; None; 4/8/16 times	4; None; 4/8/16 times	4
в—Џ parameterizable	Yes	Yes	Yes	Yes	Yes
в—Џ Step: None		Yes; 1 x cycle time			Yes; 1 x cycle time
в—Џ Step: low		Yes; 4 x cycle time			Yes; 4 x cycle time
в—Џ Step: Medium		Yes; 8 x cycle time			Yes; 8 x cycle time
в—Џ Step: High		Yes; 16 x cycle time			Yes; 16 x cycle time
Encoder
Connection of signal encoders
в—Џ for voltage measurement	No	Yes	Yes	Yes
в—Џ for current measurement as 2-wire transducer	Yes			Yes	Yes
вЂ” Burden of 2-wire transmitter, max.	650 в„¦			650 в„¦	650 в„¦
в—Џ for current measurement as 4-wire transducer	Yes		No	No	Yes
Errors/accuracies
Linearity error (relative to input range), (+/-)	0.01 %	0.01 %	0.01 %	0.01 %	0.01 %
Temperature error (relative to input range), (+/-)	0.005 %/K	0.005 %/K	0.005 %/K	0.005 %/K	0.005 %/K
Crosstalk between the inputs, min.	50 dB	-50 dB	-50 dB	50 dB	-50 dB
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-)	0.05 %	0.05 %	0.05 %	0.05 %	0.05 %
Operational error limit in overall temperature range
в—Џ Voltage, relative to input range, (+/-)		0.5 %	0.5 %	0.5 %
в—Џ Current, relative to input range, (+/-)	0.5 %			0.5 %	0.5 %
Basic error limit (operational limit at 25 °C)
в—Џ Voltage, relative to input range, (+/-)		0.3 %	0.3 %	0.3 %
в—Џ Current, relative to input range, (+/-)	0.3 %			0.3 %	0.3 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
в—Џ Series mode interference (peak value of interference < rated value of input range), min.	70 dB; With conversion time 67.5 / 22.5 / 18.75 ms: 40 dB	70 dB	70 dB; With conversion time 67.5 / 22.5 / 18.75 ms: 40 dB	70 dB	70 dB
в—Џ Common mode voltage, max.		10 V		10 V	10 V
в—Џ Common mode interference, min.		90 dB		90 dB	90 dB
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No	No	No	No	No
Interrupts/diagnostics/status information
Diagnostics function	Yes	Yes	Yes		Yes
Alarms
в—Џ Diagnostic alarm	Yes	Yes	Yes	Yes	Yes
в—Џ Limit value alarm	No	No	No	No	No
Diagnostic messages
в—Џ Monitoring the supply voltage	Yes	Yes	Yes	Yes	Yes
в—Џ Wire-break	Yes; at 4 to 20 mA	No	No	Yes; at 4 to 20 mA	Yes; at 4 to 20 mA
в—Џ Short-circuit	Yes; Sensor supply to M; module by module	Yes; at 1 to 5 V	No	Yes; with 1 to 5 V or 2-wire mode: Short-circuit of the encoder supply to ground or of an input to the encoder supply	Yes; Short-circuit of the encoder supply
в—Џ Group error	Yes	Yes	Yes	Yes	Yes
в—Џ Overflow/underflow	Yes	Yes	Yes	Yes	Yes
Diagnostics indication LED
в—Џ Monitoring of the supply voltage (PWR-LED)	Yes; Green LED	Yes; green PWR LED	Yes; green PWR LED	Yes; Green LED	Yes; green PWR LED
в—Џ Channel status display	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED
в—Џ for channel diagnostics	No	No	No	No	No
в—Џ for module diagnostics	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; Green/red LED	Yes; green/red DIAG LED
Potential separation
Potential separation channels
в—Џ between the channels	No	No	No	Yes; channel group-specific between 2-wire current input group and voltage input group	No
в—Џ between the channels and backplane bus	Yes	Yes	Yes	Yes	Yes
в—Џ between the channels and the power supply of the electronics	No	Yes	No	Yes; only for voltage inputs	Yes
Permissible potential difference
between the inputs (UCM)		10 Vpp		10 V DC	10 Vpp
Isolation
Isolation tested with	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)
Dimensions
Width	15 mm	15 mm	15 mm	15 mm	15 mm
Height	73 mm	73 mm	73 mm	73 mm	73 mm
Depth	58 mm	58 mm	58 mm	58 mm	58 mm
Weights
Weight, approx.	31 g	31 g	31 g	31 g	32 g

Article number	6ES7134-6GD00-0BA1	6ES7134-6TD00-0CA1	6ES7134-6HB00-0CA1	6ES7134-6HB00-0DA1
	ET 200SP, AI 4XI 2-/4-WIRE ST	ET 200SP, AI 4XI 2-WIRE 4...20MA HART	ET 200SP AI 2 X U/I 2-, 4-WIRE HF	ET 200SP AI 2 X U/I 2-, 4-WIRE HS
General information
Product type designation	AI 4xI 2-/4-wire ST	AI 4xI 2-wire HART	AI 2xU/I 2-/4-wire HF	AI 2xU/I 2-/4-wire HS
Firmware version	V1.1	V1.0	V2.0	V2.0.1
в—Џ FW update possible	Yes	Yes	Yes	Yes
usable BaseUnits	BU type A0, A1	BU type A0, A1	BU type A0, A1	BU type A0, A1
Color code for module-specific color identification plate	CC03	CC03	CC03	CC00
Product function
в—Џ I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
в—Џ Measuring range scalable	No	No	No	No
в—Џ Scalable measured values				No
в—Џ Adjustment of measuring range				No
Engineering with
в—Џ STEP 7 TIA Portal configurable/integrated as of version	V11 SP2 / V13	V13 SP1	V13	V13 SP1
в—Џ STEP 7 configurable/integrated as of version	V5.5 SP3 / -	V5.5 SP4 and higher	V5.5 / -	V5.5 SP3 / -
в—Џ PCS 7 configurable/integrated as of version	V8.1 SP1	V8.1 SP1	V8.1 SP1
в—Џ PROFIBUS as of GSD version/GSD revision	GSD Revision 5	GSD Revision 5	GSD Revision 5	GSD Revision 5
в—Џ PROFINET as of GSD version/GSD revision	GSDML V2.3	GSDML V2.3	GSDML V2.3	GSDML V2.3
Operating mode
в—Џ Oversampling	No	No	No	Yes; 2 channels per module
в—Џ MSI	No	No	Yes	No
CiR – Configuration in RUN
Reparameterization possible in RUN	Yes	Yes	Yes	Yes
Calibration possible in RUN	No	No	Yes	No
Supply voltage
Rated value (DC)	24 V	24 V	24 V	24 V
permissible range, lower limit (DC)	19.2 V	19.2 V	19.2 V	19.2 V
permissible range, upper limit (DC)	28.8 V	28.8 V	28.8 V	28.8 V
Reverse polarity protection	Yes	Yes	Yes	Yes
Input current
Current consumption (rated value)			39 mA; without sensor supply	39 mA; without sensor supply
Current consumption, max.	37 mA; without sensor supply	25 mA; without sensor supply
24 V encoder supply
в—Џ 24 V	Yes	Yes	Yes	Yes; For current measurement
в—Џ Short-circuit protection	Yes	Yes	Yes	Yes
в—Џ Output current, max.	20 mA; max. 50 mA per channel for a duration < 10 s	20 mA; max. 50 mA per channel for a duration < 10 s	20 mA; max. 50 mA per channel for a duration < 10 s (two-wire)	20 mA; max. 50 mA per channel for a duration < 10 s
Additional 24 V encoder supply
в—Џ Short-circuit protection			Yes; channel by channel
в—Џ Output current, max.			100 mA; max. 150 mA for a duration of < 10 s (four-wire)
Power loss
Power loss, typ.	0.85 W; Without encoder supply voltage	0.65 W; without sensor supply	0.95 W; without sensor supply	0.95 W; without sensor supply
Address area
Address space per module
в—Џ Address space per module, max.	8 byte; + 1 byte for QI information	8 byte; + 1 byte for QI information	4 byte; + 4 byte for scaling of measured values, + 1 byte for QI information	4 byte; + 1 byte for QI information (32 bytes in the oversampling operating mode)
в—Џ Address space per module with HART, max.		28 byte; + 1 byte for QI information
Hardware configuration
Selection of BaseUnit for connection variants
в—Џ 2-wire connection			BU type A0, A1	BU type A0, A1
в—Џ 4-wire connection			BU type A0, A1	BU type A0, A1
Analog inputs
Number of analog inputs	4; Differential inputs	4; Differential inputs	2; Differential inputs	2; Differential inputs
в—Џ For current measurement	4	4	2	2
в—Џ For voltage measurement			2	2
permissible input voltage for voltage input (destruction limit), max.			30 V	30 V
permissible input current for current input (destruction limit), max.	50 mA	50 mA	50 mA	50 mA
Cycle time (all channels), min.	Sum of the basic conversion times and additional processing times (depending on the parameterization of the active channels)			125 µs
Analog input with oversampling			No	Yes
в—Џ Values per cycle, max.				16
в—Џ Resolution, min.				50 µs
Standardization of measured values			Yes
Input ranges (rated values), voltages
в—Џ 0 to +10 V			Yes; 15 bit	Yes; 15 bit
в—Џ Input resistance (0 to 10 V)			75 kв„¦	75 kв„¦
в—Џ 1 V to 5 V			Yes; 15 bit	Yes; 13 bit
в—Џ Input resistance (1 V to 5 V)			75 kв„¦	75 kв„¦
в—Џ -10 V to +10 V			Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (-10 V to +10 V)			75 kв„¦	75 kв„¦
в—Џ -5 V to +5 V			Yes; 16 bit incl. sign	Yes; 15 bit incl. sign
в—Џ Input resistance (-5 V to +5 V)			75 kв„¦	75 kв„¦
Input ranges (rated values), currents
в—Џ 0 to 20 mA	Yes	No	Yes; 15 bit	Yes; 15 bit
в—Џ Input resistance (0 to 20 mA)	100 в„¦; + approx. 0.7 V diode forward voltage in 2-wire operation		130 в„¦	130 в„¦
в—Џ -20 mA to +20 mA	Yes	No	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (-20 mA to +20 mA)	100 в„¦		130 в„¦	130 в„¦
в—Џ 4 mA to 20 mA	Yes	Yes; 15 bit + sign	Yes; 15 bit	Yes; 14 bit
в—Џ Input resistance (4 mA to 20 mA)	100 в„¦; + approx. 0.7 V diode forward voltage in 2-wire operation	280 в„¦; + approx. 0.35 V diode forward voltage	130 в„¦	130 в„¦
Cable length
в—Џ shielded, max.	1 000 m	800 m	1 000 m; 200 m for voltage measurement	1 000 m; 200 m for voltage measurement
Analog value generation for the inputs
Measurement principle	integrating (Sigma-Delta)	integrating (Sigma-Delta)	Sigma Delta	Actual value encryption (successive approximation)
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.	16 bit	16 bit	16 bit	16 bit
в—Џ Integration time, parameterizable	Yes	Yes; channel by channel	Yes
в—Џ Integration time (ms)			67.5 / 22.5 / 18.75 / 10 / 5 / 2.5 / 1.25 / 0.625 ms
в—Џ Basic conversion time, including integration time (ms)			68.03 / 22.83 / 19.03 / 10.28 / 5.23 / 2.68 / 1.43 / 0.730 ms
в—Џ Interference voltage suppression for interference frequency f1 in Hz	16.6 / 50 / 60 Hz	10 / 50 / 60 Hz	16.6 / 50 / 60 / 300 / 600 / 1 200 / 2 400 / 4 800	No
в—Џ Conversion time (per channel)	180 / 60 / 50 ms		68.2 / 23 / 19.2 / 10.45 / 5.40 / 2.85 / 1.6 / 0.9 ms	10 µs
в—Џ Basic execution time of the module (all channels released)			1 ms
Smoothing of measured values
в—Џ Number of smoothing levels	4; None; 4/8/16 times	4; None; 4/8/16 times	6; none; 2-/4-/8-/16-/32-fold	7; none; 2-/4-/8-/16-/32-/64-fold
в—Џ parameterizable	Yes	Yes	Yes	Yes
Encoder
Connection of signal encoders
в—Џ for voltage measurement	No	No	Yes	Yes
в—Џ for current measurement as 2-wire transducer	Yes	Yes	Yes	Yes
вЂ” Burden of 2-wire transmitter, max.	650 в„¦		650 в„¦	650 в„¦
в—Џ for current measurement as 4-wire transducer	Yes		Yes	Yes
Errors/accuracies
Linearity error (relative to input range), (+/-)	0.01 %	0.01 %	0.01 %	0.03 %
Temperature error (relative to input range), (+/-)	0.005 %/K	0.005 %/K	0.003 %/K	0.01 %/K
Crosstalk between the inputs, min.	50 dB; Applies to up to ±5 V overvoltage in other channels	60 dB	-50 dB	-50 dB
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-)	0.05 %	0.05 %	0.01 %	0.1 %
Operational error limit in overall temperature range
в—Џ Voltage, relative to input range, (+/-)			0.1 %	0.3 %
в—Џ Current, relative to input range, (+/-)	0.5 %	0.5 %	0.1 %	0.3 %
Basic error limit (operational limit at 25 °C)
в—Џ Voltage, relative to input range, (+/-)			0.05 %; 0.1 % at SFU 4.8 kHz	0.2 %
в—Џ Current, relative to input range, (+/-)	0.3 %	0.3 %	0.05 %; 0.1 % at SFU 4.8 kHz	0.2 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
в—Џ Series mode interference (peak value of interference < rated value of input range), min.	70 dB	60 dB
в—Џ Common mode voltage, max.	10 V		35 V	35 V
в—Џ Common mode interference, min.	90 dB		90 dB	90 dB
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No	No	Yes	Yes
Filtering and processing time (TCI), min.			800 µs	80 µs
Bus cycle time (TDP), min.			1 ms	125 µs; Starting from firmware Version V2.0.1
Jitter, max.			5 µs
Interrupts/diagnostics/status information
Diagnostics function	Yes	Yes	Yes
Alarms
в—Џ Diagnostic alarm	Yes	Yes	Yes	Yes
в—Џ Limit value alarm	No	Yes	Yes; two upper and two lower limit values in each case	Yes; two upper and two lower limit values in each case
Diagnostic messages
в—Џ Monitoring the supply voltage	Yes	Yes	Yes
в—Џ Wire-break	Yes; at 4 to 20 mA	Yes; channel by channel	Yes; Measuring range 4 to 20 mA only	Yes; channel-by-channel, at 4 to 20 mA only
в—Џ Short-circuit	Yes; 2-wire mode: Short-circuit of the encoder supply to ground or of an input to the encoder supply	Yes; Channel-by-channel, short-circuit of the encoder supply to ground or of an input to the encoder supply	Yes; channel-by-channel, at 1 to 5 V or for short-circuit in encoder supply	Yes; channel-by-channel, at 1 to 5 V or for current measuring ranges short-circuit in encoder supply
в—Џ Group error	Yes	Yes	Yes	Yes
в—Џ Overflow/underflow	Yes	Yes; channel by channel	Yes	Yes
Diagnostics indication LED
в—Џ Monitoring of the supply voltage (PWR-LED)	Yes; Green LED	Yes; green PWR LED	Yes; green PWR LED	Yes; green PWR LED
в—Џ Channel status display	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED
в—Џ for channel diagnostics	No	Yes; Red LED	Yes; Red LED	Yes; Red LED
в—Џ for module diagnostics	Yes; Green/red LED	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; green/red DIAG LED
Potential separation
Potential separation channels
в—Џ between the channels	Yes; channel group-specific between 2-wire current input group and 4-wire voltage input group	No	Yes	Yes
в—Џ between the channels and backplane bus	Yes	Yes	Yes	Yes
в—Џ between the channels and the power supply of the electronics	Yes; only for 4-wire transducer	No	Yes	Yes
Permissible potential difference
between the inputs (UCM)	10 V DC		75 V DC/60 V AC	75 V DC/60 V AC
Isolation
Isolation tested with	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)
Dimensions
Width	15 mm	15 mm	15 mm	15 mm
Height	73 mm	73 mm	73 mm	73 mm
Depth	58 mm	58 mm	58 mm	58 mm
Weights
Weight, approx.	31 g	31 g	32 g	32 g

Article number	6ES7134-6JF00-0CA1	6ES7134-6JD00-0CA1
	ET 200SP, AI 8XRTD/TC 2-WIRE HF	ET 200SP, AI 4XRTD/TC 2-/3-/4-WIRE HF
General information
Product type designation	AI 8xRTD/TC 2-wire HF	AI 4xRTD/TC 2-/3-/4-wire HF
Firmware version	V2.0	V2.0
в—Џ FW update possible	Yes	Yes
usable BaseUnits	BU type A0, A1	BU type A0, A1
Color code for module-specific color identification plate	CC00	CC00
Product function
в—Џ I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
Engineering with
в—Џ STEP 7 TIA Portal configurable/integrated as of version	V13	V12 SP1 / V13
в—Џ STEP 7 configurable/integrated as of version	V5.5 / -	V5.5 SP3 / V5.5 SP4
в—Џ PCS 7 configurable/integrated as of version		V8.1 SP1
в—Џ PROFIBUS as of GSD version/GSD revision	GSD Revision 5	GSD Revision 5
в—Џ PROFINET as of GSD version/GSD revision	GSDML V2.3	GSDML V2.3
Operating mode
в—Џ Oversampling	No	No
в—Џ MSI	No	No
CiR – Configuration in RUN
Reparameterization possible in RUN	Yes	Yes
Calibration possible in RUN	Yes	Yes
Supply voltage
Rated value (DC)	24 V	24 V
permissible range, lower limit (DC)	19.2 V	19.2 V
permissible range, upper limit (DC)	28.8 V	28.8 V
Reverse polarity protection	Yes	Yes
Input current
Current consumption, max.	35 mA	35 mA
Power loss
Power loss, typ.	0.75 W	0.75 W
Address area
Address space per module
в—Џ Address space per module, max.	16 byte; + 1 byte for QI information	8 byte; + 1 byte for QI information
Analog inputs
Number of analog inputs	8	4
в—Џ For voltage measurement	8	4
в—Џ For resistance/resistance thermometer measurement	8	4
в—Џ For thermocouple measurement	8	4
permissible input voltage for voltage input (destruction limit), max.	30 V	30 V
Constant measurement current for resistance-type transmitter, typ.	2 mA	0.7 mA; 1.7 mA for Cu10 sensors
Cycle time (all channels), min.	Sum of the basic conversion times and additional processing times (depending on the parameterization of the active channels)	Sum of the basic conversion times and additional processing times (depending on the parameterization of the active channels); for line compensation in case of a three-wire connection, an additional cycle is necessary
Technical unit for temperature measurement adjustable	Yes; °C/°F/K	Yes; °C/°F/K
Input ranges (rated values), voltages
в—Џ -1 V to +1 V	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (-1 V to +1 V)	1 Mв„¦	1 Mв„¦
в—Џ -250 mV to +250 mV	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (-250 mV to +250 mV)	1 Mв„¦	1 Mв„¦
в—Џ -50 mV to +50 mV	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (-50 mV to +50 mV)	1 Mв„¦	1 Mв„¦
в—Џ -80 mV to +80 mV	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (-80 mV to +80 mV)	1 Mв„¦	1 Mв„¦
Input ranges (rated values), thermocouples
в—Џ Type B	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (Type B)	1 Mв„¦	1 Mв„¦
в—Џ Type C	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (Type C)	1 Mв„¦	1 Mв„¦
в—Џ Type E	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (Type E)	1 Mв„¦	1 Mв„¦
в—Џ Type J	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (type J)	1 Mв„¦	1 Mв„¦
в—Џ Type K	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (Type K)	1 Mв„¦	1 Mв„¦
в—Џ Type L	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (Type L)	1 Mв„¦	1 Mв„¦
в—Џ Type N	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (Type N)	1 Mв„¦	1 Mв„¦
в—Џ Type R	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (Type R)	1 Mв„¦	1 Mв„¦
в—Џ Type S	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (Type S)	1 Mв„¦	1 Mв„¦
в—Џ Type T	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (Type T)	1 Mв„¦	1 Mв„¦
в—Џ Type U	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (Type U)	1 Mв„¦	1 Mв„¦
в—Џ Type TXK/TXK(L) to GOST	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (Type TXK/TXK(L) to GOST)	1 Mв„¦	1 Mв„¦
Input ranges (rated values), resistance thermometer
в—Џ Cu 10		Yes; 16 bit incl. sign
в—Џ Input resistance (Cu 10)		1 Mв„¦
в—Џ Ni 100	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (Ni 100)	1 Mв„¦	1 Mв„¦
в—Џ Ni 1000	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (Ni 1000)	1 Mв„¦	1 Mв„¦
в—Џ LG-Ni 1000	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (LG-Ni 1000)	1 Mв„¦	1 Mв„¦
в—Џ Ni 120	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (Ni 120)	1 Mв„¦	1 Mв„¦
в—Џ Ni 200	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (Ni 200)	1 Mв„¦	1 Mв„¦
в—Џ Ni 500	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (Ni 500)	1 Mв„¦	1 Mв„¦
в—Џ Pt 100	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (Pt 100)	1 Mв„¦	1 Mв„¦
в—Џ Pt 1000	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (Pt 1000)	1 Mв„¦	1 Mв„¦
в—Џ Pt 200	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (Pt 200)	1 Mв„¦	1 Mв„¦
в—Џ Pt 500	Yes; 16 bit incl. sign	Yes; 16 bit incl. sign
в—Џ Input resistance (Pt 500)	1 Mв„¦	1 Mв„¦
Input ranges (rated values), resistors
в—Џ 0 to 150 ohms	Yes; 15 bit	Yes; 15 bit
в—Џ Input resistance (0 to 150 ohms)	1 Mв„¦	1 Mв„¦
в—Џ 0 to 300 ohms	Yes; 15 bit	Yes; 15 bit
в—Џ Input resistance (0 to 300 ohms)	1 Mв„¦	1 Mв„¦
в—Џ 0 to 600 ohms	Yes; 15 bit	Yes; 15 bit
в—Џ Input resistance (0 to 600 ohms)	1 Mв„¦	1 Mв„¦
в—Џ 0 to 3000 ohms	Yes; 15 bit	Yes; 15 bit
в—Џ Input resistance (0 to 3000 ohms)	1 Mв„¦	1 Mв„¦
в—Џ 0 to 6000 ohms	Yes; 15 bit	Yes; 15 bit
в—Џ Input resistance (0 to 6000 ohms)	1 Mв„¦	1 Mв„¦
в—Џ PTC	Yes; 15 bit	Yes; 15 bit
в—Џ Input resistance (PTC)	1 Mв„¦	1 Mв„¦
Thermocouple (TC)
Temperature compensation
вЂ” parameterizable	Yes	Yes
вЂ” Reference channel of the module	Yes	Yes
вЂ” internal comparison point	Yes; with BaseUnit type A1	Yes; with BaseUnit type A1
вЂ” Reference channel of the group	Yes	Yes
вЂ” Number of reference channel groups	4; Group 0 to 3	4; Group 0 to 3
вЂ” fixed reference temperature	Yes	Yes
Cable length
в—Џ shielded, max.	200 m; 50 m with thermocouples	200 m; 50 m with thermocouples
Analog value generation for the inputs
Measurement principle	integrating (Sigma-Delta)	integrating (Sigma-Delta)
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.	16 bit	16 bit
в—Џ Integration time, parameterizable	Yes	Yes
в—Џ Basic conversion time, including integration time (ms)
вЂ” additional processing time for wire-break check	2 ms; In the ranges resistance thermometers, resistors and thermocouples	2 ms; In the ranges resistance thermometers, resistors and thermocouples
вЂ” additional power line wire-break check		2 ms; for 3/4 wire transducer (resistance thermometer and resistor)
в—Џ Interference voltage suppression for interference frequency f1 in Hz	16.6 / 50 / 60 Hz	16.6 / 50 / 60 Hz
в—Џ Conversion time (per channel)	180 / 60 / 50 ms	180 / 60 / 50 ms
Smoothing of measured values
в—Џ Number of smoothing levels	4; None; 4/8/16 times	4; None; 4/8/16 times
в—Џ parameterizable	Yes	Yes
Encoder
Connection of signal encoders
в—Џ for voltage measurement	Yes	Yes
в—Џ for resistance measurement with two-wire connection	Yes	Yes
в—Џ for resistance measurement with three-wire connection	No	Yes
в—Џ for resistance measurement with four-wire connection	No	Yes
Errors/accuracies
Linearity error (relative to input range), (+/-)	0.01 %; ±0.1 % for resistance thermometers and resistance	0.01 %; ±0.1 % for resistance thermometers and resistance
Temperature error (relative to input range), (+/-)	0.0009 %/K; ±0.005 % / K at thermocouple	0.0009 %/K; ±0.005 % / K at thermocouple
Crosstalk between the inputs, min.	-50 dB	-50 dB
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-)	0.05 %	0.05 %
Operational error limit in overall temperature range
в—Џ Voltage, relative to input range, (+/-)	0.1 %	0.1 %
в—Џ Resistance, relative to input range, (+/-)	0.1 %	0.1 %
Basic error limit (operational limit at 25 °C)
в—Џ Voltage, relative to input range, (+/-)	0.05 %	0.05 %
в—Џ Resistance, relative to input range, (+/-)	0.05 %	0.05 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
в—Џ Series mode interference (peak value of interference < rated value of input range), min.	70 dB	70 dB
в—Џ Common mode voltage, max.	10 V	10 V
в—Џ Common mode interference, min.	90 dB	90 dB
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No	No
Interrupts/diagnostics/status information
Diagnostics function	Yes	Yes
Alarms
в—Џ Diagnostic alarm	Yes	Yes
в—Џ Limit value alarm	Yes; two upper and two lower limit values in each case	Yes; two upper and two lower limit values in each case
Diagnostic messages
в—Џ Monitoring the supply voltage	Yes	Yes
в—Џ Wire-break	Yes; channel by channel	Yes; channel by channel
в—Џ Group error	Yes	Yes
в—Џ Overflow/underflow	Yes; channel by channel	Yes; channel by channel
Diagnostics indication LED
в—Џ Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED	Yes; green PWR LED
в—Џ Channel status display	Yes; Green LED	Yes; Green LED
в—Џ for channel diagnostics	Yes; Red LED	Yes; Red LED
в—Џ for module diagnostics	Yes; green/red DIAG LED	Yes; green/red DIAG LED
Potential separation
Potential separation channels
в—Џ between the channels	No	No
в—Џ between the channels and backplane bus	Yes	Yes
в—Џ between the channels and the power supply of the electronics	Yes	Yes
Permissible potential difference
between the inputs (UCM)	10 V DC	10 V DC
Isolation
Isolation tested with	707 V DC (type test)	707 V DC (type test)
Dimensions
Width	15 mm	15 mm
Height	73 mm	73 mm
Depth	58 mm	58 mm
Weights
Weight, approx.	32 g	30 g

Article number	6ES7134-6PA01-0BD0	6ES7134-6PA20-0BD0
	ET 200SP AI ENERGY METER 400VAC ST	ET 200SP AI ENERGY METER 480VAC ST
General information
Product type designation	AI energy meter 400VAC ST	AI Energy Meter 480VAC ST
Firmware version	V3.0	V4.0
usable BaseUnits	BU type D0, BU20-P12+A0+0B	BU type D0, BU20-P12+A0+0B
Product function
в—Џ Voltage measurement	Yes	Yes
в—Џ Voltage measurement with voltage transformers	No	Yes
в—Џ Current measurement	Yes	Yes
в—Џ Phase current measurement without current transformers	No	No
в—Џ Phase current measurement with current transformers	Yes	Yes
в—Џ Energy measurement	Yes	Yes
в—Џ Frequency measurement	Yes	Yes
в—Џ Power measurement	Yes	Yes
в—Џ Active power measurement	Yes	Yes
в—Џ Reactive power measurement	Yes	Yes
в—Џ I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
в—Џ Isochronous mode	No	No
Engineering with
в—Џ STEP 7 TIA Portal configurable/integrated as of version	V13 SP1	V13 SP1
в—Џ STEP 7 configurable/integrated as of version	V5.5 SP4 and higher	V5.5 SP4 and higher
в—Џ PROFIBUS as of GSD version/GSD revision	GSD Revision 5	GSD Revision 5
в—Џ PROFINET as of GSD version/GSD revision	V2.3	V2.3
Operating mode
в—Џ cyclic measurement	Yes	Yes
в—Џ acyclic measurement	Yes	Yes
в—Џ Acyclic measured value access	Yes	Yes
в—Џ Fixed measured value sets	Yes	Yes
в—Џ Freely definable measured value sets	No	Yes
Configuration control
via dataset	Yes	Yes
CiR – Configuration in RUN
Reparameterization possible in RUN	Yes	Yes
Calibration possible in RUN	No	Yes
Installation type/mounting
Mounting position	Any	Any
Supply voltage
Design of the power supply	Supply via voltage measurement channel L1	Supply via voltage measurement channel L1
Type of supply voltage	100 - 240 V AC	AC 100 - 277 V
permissible range, lower limit (AC)	90 V	90 V
permissible range, upper limit (AC)	264 V	293 V
Line frequency
в—Џ permissible range, lower limit	47 Hz	47 Hz
в—Џ permissible range, upper limit	63 Hz	63 Hz
Power loss
Power loss, typ.	0.6 W	0.6 W
Address area
Address space per module
в—Џ Address space per module, max.	44 byte; 32 byte input / 12 byte output	268 byte; 256 byte input / 12 byte output
Hardware configuration
Automatic encoding
в—Џ Mechanical coding element	Yes	Yes
Time of day
Operating hours counter
в—Џ present	No	Yes
Analog inputs
Cycle time (all channels), typ.	50 ms; Time for consistent update of all measured and calculated values (cyclic und acyclic data)	50 ms; Time for consistent update of all measured and calculated values (cyclic und acyclic data)
Interrupts/diagnostics/status information
Alarms
в—Џ Diagnostic alarm	Yes	Yes
в—Џ Limit value alarm	No	Yes
в—Џ Hardware interrupt	No	Yes; Monitoring of up to 16 freely selectable process values (exceeding or undershooting of value)
Diagnostics indication LED
в—Џ Monitoring of the supply voltage (PWR-LED)	Yes	Yes
в—Џ Channel status display	Yes; Green LED	Yes; Green LED
в—Џ for channel diagnostics	Yes; red Fn LED	Yes; red Fn LED
в—Џ for module diagnostics	Yes; green/red DIAG LED	Yes; green/red DIAG LED
Integrated Functions
Measuring functions
в—Џ Measuring procedure for voltage measurement	TRMS	TRMS
в—Џ Measuring procedure for current measurement	TRMS	TRMS
в—Џ Type of measured value acquisition	seamless	seamless
в—Џ Curve shape of voltage	Sinusoidal or distorted	Sinusoidal or distorted
в—Џ Buffering of measured variables	No	Yes
в—Џ Parameter length	38 byte	74 byte
в—Џ Bandwidth of measured value acquisition	2 kHz; Harmonics: 39 / 50 Hz, 32 / 60 Hz	2 kHz; Harmonics: 39 / 50 Hz, 32 / 60 Hz
Operating mode for measured value acquisition
вЂ” automatic detection of line frequency	No; Parameterizable	No; Parameterizable
Measuring range
вЂ” Frequency measurement, min.	45 Hz	45 Hz
вЂ” Frequency measurement, max.	65 Hz	65 Hz
Measuring inputs for voltage
вЂ” Measurable line voltage between phase and neutral conductor	230 V	277 V
вЂ” Measurable line voltage between the line conductors	400 V	480 V
вЂ” Measurable line voltage between phase and neutral conductor, min.	90 V	90 V
вЂ” Measurable line voltage between phase and neutral conductor, max.	264 V	293 V
вЂ” Measurable line voltage between the line conductors, min.	155 V	155 V
вЂ” Measurable line voltage between the line conductors, max.	460 V	508 V
вЂ” Measurement category for voltage measurement in accordance with IEC 61010-2-030	CAT II; CAT III in case of guaranteed protection level of 1.5 kV	CAT II; CAT III in case of guaranteed protection level of 1.5 kV
вЂ” Internal resistance line conductor and neutral conductor	3.4 Mв„¦	3.4 Mв„¦
вЂ” Power consumption per phase	20 mW	20 mW
вЂ” Impulse voltage resistance 1,2/50µs	1 kV	1 kV
Measuring inputs for current
вЂ” measurable relative current (AC), min.	5 %; Relative to the secondary rated current; 1 A, 5 A	1 %; Relative to the secondary rated current 5 A
вЂ” measurable relative current (AC), max.	100 %; Relative to the secondary rated current; 1 A, 5 A	100 %; Relative to the secondary rated current 5 A
вЂ” Continuous current with AC, maximum permissible	5 A	5 A
вЂ” Apparent power consumption per phase for measuring range 5 A	0.6 V·A	0.6 V·A
вЂ” Rated value short-time withstand current restricted to 1 s	100 A	100 A
вЂ” Input resistance measuring range 0 to 5 A	25 mв„¦; At the terminal	25 mв„¦; At the terminal
вЂ” Zero point suppression	Parameterizable: 20 ... 250 mA, default 50 mA	Parameterizable: 2 ... 250 mA, default 50 mA
вЂ” Surge strength	10 A; for 1 minute	10 A; for 1 minute
Accuracy class according to IEC 61557-12
вЂ” Measured variable voltage	0.5	0,2
вЂ” Measured variable current	0.5	0,2
вЂ” Measured variable apparent power	1	0.5
вЂ” Measured variable active power	1	0.5
вЂ” Measured variable reactive power	1	1
вЂ” Measured variable power factor	0.5	0.5
вЂ” Measured variable active energy	1	0.5
вЂ” Measured variable reactive energy	2	1
вЂ” Measured variable neutral current		0.5; calculated
вЂ” Measured variable phase angle	±1 °; not covered by IEC 61557-12	±1 °; not covered by IEC 61557-12
вЂ” Measured variable frequency	0.05	0.05
Potential separation
Potential separation channels
в—Џ between the channels and backplane bus	Yes; 3 700V AC (type test) CAT III	Yes; 3 700V AC (type test) CAT III
Isolation
Isolation tested with	2 300V AC for 1 min. (type test)	2 300V AC for 1 min. (type test)
Ambient conditions
Ambient temperature during operation
в—Џ horizontal installation, min.	0 °C	0 °C
в—Џ horizontal installation, max.	60 °C	60 °C
в—Џ vertical installation, min.	0 °C	0 °C
в—Џ vertical installation, max.	50 °C	50 °C
Dimensions
Width	20 mm	20 mm
Height	73 mm	73 mm
Depth	58 mm	58 mm
Weights
Weight (without packaging)	45 g	45 g
Data for selecting a current transformer
в—Џ Burden power current transformer x/1A, min.	As a function of cable length and cross section, see device manual	As a function of cable length and cross section, see device manual
в—Џ Burden power current transformer x/5A, min.	As a function of cable length and cross section, see device manual	As a function of cable length and cross section, see device manual

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания