Digital input modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Digital input modules

| | | | | | |

Article number	6ES7131-6BF00-0AA0	6ES7131-6BF60-0AA0	6ES7131-6BF00-0BA0	6ES7131-6BH00-0BA0
	ET 200SP, DI 8X24VDC BASIC	ET 200SP, DI 8X24VDC SOURCE BA	ET 200SP, DI 8X24VDC ST	ET 200SP, DI 16X24VDC ST
General information
Product type designation	DI 8x24 VDC BA	DI 8x24 VDC SRC BA	DI 8x24 VDC ST	DI 16x24 VDC ST
Firmware version	V1.0	V1.0	V1.1	V1.1
в—Џ FW update possible	Yes	Yes	Yes	Yes
usable BaseUnits	BU type A0	BU type A0	BU type A0	BU type A0
Color code for module-specific color identification plate	CC01	CC02	CC01	CC00
Product function
в—Џ I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
Engineering with
в—Џ STEP 7 TIA Portal configurable/integrated as of version	V13 SP1	V13 / V13	V11 SP2 / V13	V13 SP1
в—Џ STEP 7 configurable/integrated as of version	V5.5 SP3 / -	V5.5 SP3 / -	V5.5 SP3 / -	V5.5 / -
в—Џ PCS 7 configurable/integrated as of version			V8.1 SP1	V8.1 SP1
в—Џ PROFIBUS as of GSD version/GSD revision	GSD Revision 5	GSD Revision 5	GSD Revision 5	GSD Revision 5
в—Џ PROFINET as of GSD version/GSD revision	GSDML V2.3	GSDML V2.3	GSDML V2.3	GSDML V2.3
Operating mode
в—Џ DI	Yes	Yes	Yes	Yes
в—Џ Counter	No	No	No	No
в—Џ Oversampling	No	No	No	No
в—Џ MSI	No	No	No	No
Supply voltage
Rated value (DC)	24 V	24 V	24 V	24 V
permissible range, lower limit (DC)	19.2 V	19.2 V	19.2 V	19.2 V
permissible range, upper limit (DC)	28.8 V	28.8 V	28.8 V	28.8 V
Reverse polarity protection	Yes	Yes	Yes	Yes
Input current
Current consumption (rated value)	8 mA; without sensor supply
Current consumption, max.	70 mA; All channels are supplied from the encoder supply		50 mA	90 mA
Encoder supply
Number of outputs	8		8
Output voltage encoder supply, min.	19.2 V		19.2 V
Short-circuit protection	No	No	Yes; per module	No
24 V encoder supply
в—Џ 24 V	Yes		Yes	No
в—Џ Short-circuit protection	Yes		Yes	No
в—Џ Output current, max.	700 mA		700 mA; Total current of all encoders
Power loss
Power loss, typ.	1.6 W; 24 V, 8 inputs supplied via encoder supply	1.5 W	1 W	1.7 W
Address area
Address space per module
в—Џ Address space per module, max.	1 byte	1 byte	1 byte; + 1 byte for QI information	2 byte; + 2 bytes for QI information
в—Џ Inputs	1 byte	1 byte
Hardware configuration
Automatic encoding
в—Џ Mechanical coding element				Yes
Selection of BaseUnit for connection variants
в—Џ 1-wire connection	BU type A0	BU type A0	BU type A0	BU type A0
в—Џ 2-wire connection	BU type A0	BU type A0	BU type A0	BU type A0 + external terminals
в—Џ 3-wire connection	BU type A0 with AUX terminals	BU type A0 with AUX terminals	BU type A0 with AUX terminals	BU type A0 + external terminals
в—Џ 4-wire connection	BU type A0 + external terminals	BU type A0 + external terminals	BU type A0 + external terminals	BU type A0 + external terminals
Digital inputs
Number of digital inputs	8	8	8	16
Source/sink input	P-reading	Yes; m-reading	P-reading	P-reading
Input characteristic curve in accordance with IEC 61131, type 1	Yes	Yes	Yes	Yes
Input characteristic curve in accordance with IEC 61131, type 2	Yes	No	No	No
Input characteristic curve in accordance with IEC 61131, type 3	Yes	Yes	Yes	Yes
Pulse extension	No	No	No	No
Input voltage
в—Џ Type of input voltage	DC	DC	DC	DC
в—Џ Rated value (DC)	24 V	24 V	24 V	24 V
в—Џ for signal "0"	-30 to +5V	30 V to -5 V (reference potential is L+)	-30 to +5V	-30 to +5V
в—Џ for signal "1"	+11 to +30V	-11 V to -30 V (reference potential is L+)	+11 to +30V	+11 to +30V
Input current
в—Џ for signal "1", typ.	6.8 mA	6 mA	2.5 mA	2.5 mA
Input delay (for rated value of input voltage)
for standard inputs
вЂ” parameterizable	Yes; None / 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each case + delay of 30 µs to 500 µs, depending on line length)	Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each case + delay of 30 to 500 µs, depending on line length)	Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each case + delay of 30 to 500 µs, depending on line length)	Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each case + delay of 30 to 500 µs, depending on line length)
вЂ” at "0" to "1", min.				0.05 ms
вЂ” at "0" to "1", max.				20 ms
вЂ” at "1" to "0", min.				0.05 ms
вЂ” at "1" to "0", max.				20 ms
for interrupt inputs
вЂ” parameterizable	No	No	No	No
for counter/technological functions
вЂ” parameterizable	No	No	No	No
Cable length
в—Џ shielded, max.	1 000 m	1 000 m	1 000 m	1 000 m
в—Џ unshielded, max.	600 m	200 m	600 m	600 m
Encoder
Connectable encoders
в—Џ 2-wire sensor	Yes	Yes	Yes	Yes
вЂ” permissible quiescent current (2-wire sensor), max.	2 mA	1.5 mA	1.5 mA	1.5 mA
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No	No	No	No
Interrupts/diagnostics/status information
Diagnostics function	Yes	Yes	Yes	Yes
Alarms
в—Џ Diagnostic alarm	Yes	Yes	Yes	Yes
в—Џ Hardware interrupt		No
Diagnostic messages
в—Џ Diagnostic information readable	Yes	Yes	Yes	Yes
в—Џ Monitoring the supply voltage	Yes	Yes	Yes	Yes
вЂ” parameterizable	Yes	Yes	Yes	Yes
в—Џ Monitoring of encoder power supply	No	No	Yes; Module-wise	No
в—Џ Wire-break	No	No	Yes; Module-by-module, optional protective circuit for preventing wire-break diagnostics in the case of simple encoder contacts: 25 kOhm to 45 kOhm	Yes; Module-by-module, optional protective circuit for preventing wire-break diagnostics in the case of simple encoder contacts: 25 kOhm to 45 kOhm
в—Џ Short-circuit	No	No	Yes; Module-wise	No
в—Џ Group error		Yes		Yes
Diagnostics indication LED
в—Џ Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED	Yes; green PWR LED	Yes; green PWR LED	Yes; green PWR LED
в—Џ Channel status display	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED
в—Џ for channel diagnostics	No	No	No	No
в—Џ for module diagnostics	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; green/red DIAG LED
Potential separation
Potential separation channels
в—Џ between the channels	No	No	No	No
в—Џ between the channels and backplane bus	Yes	Yes	Yes	Yes
в—Џ between the channels and the power supply of the electronics	No	No	No	No
Isolation
Isolation tested with	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)
Dimensions
Width	15 mm	15 mm	15 mm	15 mm
Height	73 mm	73 mm	73 mm	73 mm
Depth	58 mm	58 mm	58 mm	58 mm
Weights
Weight, approx.	28 g	28 g	28 g	28 g

Article number	6ES7131-6BF00-0CA0	6ES7131-6BF00-0DA0	6ES7131-6TF00-0CA0	6ES7131-6FD00-0BB1
	ET 200SP, DI 8X24VDC HF	ET 200SP, DI 8X24VDC HIGH SPEED	ET 200SP, DI 8XNAMUR HF	ET 200SP, DI 4X120..230VAC ST
General information
Product type designation	DI 8x24 V DC HF	DI 8x24 V DC HS	DI 8xNAMUR HF	DI 4x120 вЂ¦ 230 V AC ST
Firmware version	V2.0	V1.0.2	V1.0	V1.0
в—Џ FW update possible	Yes	Yes	Yes	Yes
usable BaseUnits	BU type A0	BU type A0	BU type A0	BU type B1
Color code for module-specific color identification plate	CC01	CC01	CC01	CC41
Product function
в—Џ I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
Engineering with
в—Џ STEP 7 TIA Portal configurable/integrated as of version	V13 SP1 / -	V13 SP1	V13 / V13	V13 / V13
в—Џ STEP 7 configurable/integrated as of version	V5.5 / -	V5.5 SP3 / -	V5.5 SP3 / -	V5.5 SP3 / -
в—Џ PCS 7 configurable/integrated as of version	V8.1 SP1
в—Џ PROFIBUS as of GSD version/GSD revision	One GSD file each, Revision 3 and 5 and higher	GSD Revision 5	GSD Revision 5	GSD Revision 5
в—Џ PROFINET as of GSD version/GSD revision	GSDML V2.3	GSDML V2.3	GSDML V2.3	GSDML V2.3
Operating mode
в—Џ DI	Yes	Yes	Yes	Yes
в—Џ Counter	No	Yes	No	No
в—Џ Oversampling	No	Yes	No	No
в—Џ MSI	Yes	No	No	No
Supply voltage
Rated value (DC)	24 V	24 V	24 V
permissible range, lower limit (DC)	19.2 V	19.2 V	19.2 V
permissible range, upper limit (DC)	28.8 V	28.8 V	28.8 V
Rated value (AC)				230 V
Reverse polarity protection	Yes	Yes	Yes	No
Input current
Current consumption (rated value)				10 mA
Current consumption, max.		70 mA; without sensor supply
Encoder supply
Number of outputs	8		8	4
Output voltage encoder supply, min.	19.2 V
Short-circuit protection	Yes		Yes	No; when using BU type B1, a fuse with 10 A tripping current must be provided
Output current
в—Џ up to 60 °C, max.				10 A
24 V encoder supply
в—Џ 24 V	Yes	Yes	No	No
в—Џ Short-circuit protection	Yes; per channel, electronic	Yes; per module, electronic	No	No
в—Џ Output current, max.		700 mA
Power loss
Power loss, typ.	1.5 W; 24 V, 8 inputs supplied via encoder supply	1.5 W	1.5 W	1 W; Active power, load voltage 230 V, all inputs connected with 230 V, 50 Hz
Address area
Address space per module
в—Џ Address space per module, max.		45 byte	1 byte; + 1 byte for QI information	1 byte; + 1 byte for QI information
в—Џ Inputs	1 byte; + 1 byte for QI information	32 byte; 1 byte + 1 byte for QI information in DI mode; 32 bytes in Oversampling mode; 25 bytes in Counter mode		1 byte
в—Џ Outputs		20 byte; In count mode
Hardware configuration
Automatic encoding	Yes
в—Џ Mechanical coding element	Yes
Submodules
в—Џ Number of configurable submodules, max.	4
Selection of BaseUnit for connection variants
в—Џ 1-wire connection	BU type A0	BU type A0	BU type A0	BU type B1
в—Џ 2-wire connection	BU type A0	BU type A0	BU type A0	BU type B1
в—Џ 3-wire connection	BU type A0 with AUX terminals	BU type A0 with AUX terminals	BU type A0 + external terminals	BU type B1
в—Џ 4-wire connection	BU type A0 + Potential isolation module	BU type A0 + external terminals	BU type A0 + external terminals	BU type B1 + external terminals
Digital inputs
Number of digital inputs	8	8	8; NAMUR	4
Digital inputs, parameterizable	Yes		Yes
Source/sink input	P-reading	P-reading		No
Input characteristic curve in accordance with IEC 61131, type 3	Yes			Yes
Pulse extension	Yes; Pulse duration from 4 µs	Yes	Yes; 0.5 s, 1 s, 2 s	No
в—Џ Length	2 s; 50 ms, 100 ms, 200 ms, 500 ms, 1 s, 2 s	2 s; 50 ms, 100 ms, 200 ms, 500 ms, 1 s, 2 s
Edge evaluation	Yes; rising edge, falling edge, edge change		Yes; rising edge, falling edge, edge change
Signal change flutter			Yes; 2 to 32 signal changes
Flutter observation window			Yes; 0.5 s, 1 s to 100 s in 1-s steps
Digital input functions, parameterizable
в—Џ Gate start/stop		Yes
в—Џ Freely usable digital input		Yes
в—Џ Counter		Yes
вЂ” Number, max.		4
вЂ” Counting frequency, max.		10 kHz
вЂ” Counting width		32 bit
вЂ” Counting direction up/down		Yes
в—Џ Digital input with oversampling		Yes
вЂ” Number, max.		8
вЂ” Values per cycle, max.		32
вЂ” Resolution, min.		7.8125 µs
Input voltage
в—Џ Type of input voltage	DC	DC	DC	120/230 V AC (47 Hz to 63 Hz)
в—Џ Rated value (DC)	24 V	24 V	8.2 V
в—Џ Rated value (AC)				230 V
в—Џ for signal "0"	-30 to +5V	-30 to +5V		0V AC to 40V AC
в—Џ for signal "1"	+11 to +30V	+11 to +30V		74 V AC to 264 V AC
Input current
в—Џ for signal "1", typ.	2.5 mA	6 mA		10.8 mA
for 10 k switched contact
вЂ” for signal "0"			0.35 to 1.2 mA
вЂ” for signal "1"			2.1 to 7 mA
for unswitched contact
вЂ” for signal "0", max. (permissible quiescent current)			0.5 mA
вЂ” for signal "1"			typ. 8 mA
for NAMUR encoders
вЂ” for signal "0"			0.35 to 1.2 mA
вЂ” for signal "1"			2.1 to 7 mA
Input delay (for rated value of input voltage)
в—Џ tolerated changeover time for changeover contacts			300 ms
for standard inputs
вЂ” parameterizable	Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each case + delay of 30 to 500 µs, depending on line length)	Yes; none / 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms	No	No
вЂ” at "0" to "1", min.	0.05 ms			1.5 ms
вЂ” at "0" to "1", max.	20 ms			4 ms
вЂ” at "1" to "0", min.	0.05 ms			10 ms
вЂ” at "1" to "0", max.	20 ms			10 ms
for interrupt inputs
вЂ” parameterizable		Yes
for counter/technological functions
вЂ” parameterizable		Yes
for NAMUR inputs
вЂ” at "0" to "1", max.			12 ms
вЂ” at "1" to "0", max.			12 ms
Cable length
в—Џ shielded, max.	1 000 m	50 m	200 m	1 000 m
в—Џ unshielded, max.	600 m	50 m		600 m
Encoder
Connectable encoders
в—Џ NAMUR encoder/changeover contact according to EN 60947			Yes
в—Џ Single contact / changeover contact unconnected			Yes
в—Џ Single contact / changeover contact connected with 10 kО©			Yes
в—Џ 2-wire sensor	Yes	Yes		Yes
вЂ” permissible quiescent current (2-wire sensor), max.	1.5 mA	1.5 mA
Isochronous mode
Isochronous operation (application synchronized up to terminal)	Yes	Yes	No	No
Filtering and processing time (TCI), min.	420 µs
Bus cycle time (TDP), min.	500 µs	125 µs
Jitter, max.	8 µs	5 µs
Interrupts/diagnostics/status information
Diagnostics function	Yes	Yes	Yes
Alarms
в—Џ Diagnostic alarm	Yes; channel by channel	Yes	Yes; channel by channel	No
в—Џ Hardware interrupt	Yes; Parameterizable, channels 0 to 7	Yes	Yes; Parameterizable, channels 0 to 7	No
Diagnostic messages
в—Џ Diagnostic information readable	Yes	Yes	Yes
в—Џ Monitoring the supply voltage	Yes	Yes	Yes
вЂ” parameterizable	Yes	Yes	Yes
в—Џ Monitoring of encoder power supply	Yes; channel by channel	Yes; Module-wise	Yes; channel by channel
в—Џ Wire-break	Yes; Channel by channel, optional protective circuit for preventing wire-break diagnostics in the case of simple encoder contacts: 25 kOhm to 45 kOhm	No	Yes; channel by channel	No
в—Џ Short-circuit	Yes; channel by channel	Yes; Module-wise	Yes; channel by channel	No
в—Џ Group error			Yes	Yes
Diagnostics indication LED
в—Џ Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED	Yes; green PWR LED	Yes; green PWR LED	Yes; green PWR LED
в—Џ Channel status display	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED
в—Џ for channel diagnostics	Yes; Red LED	No	Yes; Red LED	No
в—Џ for module diagnostics	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; green/red DIAG LED
Potential separation
Potential separation channels
в—Џ between the channels	No	No	No	No
в—Џ between the channels and backplane bus	Yes	Yes	Yes	Yes
в—Џ between the channels and the power supply of the electronics	No	No	Yes	No
Isolation
Isolation tested with	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)	2 545 V DC/2 s (routine test)
Ambient conditions
Ambient temperature during operation
в—Џ horizontal installation, min.	0 °C
в—Џ horizontal installation, max.	60 °C
в—Џ vertical installation, min.	0 °C
в—Џ vertical installation, max.	50 °C
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude	On request: Negative ambient temperature down to -30 °C (without condensation), installation altitudes between 2 000 m and 5 000 m
Dimensions
Width	15 mm	15 mm	15 mm	20 mm
Height	73 mm	73 mm	73 mm	73 mm
Depth	58 mm	58 mm	58 mm	58 mm
Weights
Weight, approx.	28 g	28 g	32 g	36 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания