An extensive range of accessories is available for the door control drives.

This is necessary to ensure low-noise operation of the door by the motor. The geared motors can be optimally integrated into the respective door drive system.

Accessories for all controllers for industrial applications

Rubber-metal anti-vibration mounts for geared motors

To ensure low-noise door operation, SIDOOR geared motors are integrated in the door system using rubber-metal anti-vibration mounts.

• Rubber-metal anti-vibration mount 6FB1104‑0AT02‑0AD0 for SIDOOR MDG180, M3 geared motors
• Rubber-metal anti-vibration mount 6FB1104‑0AT01‑0AD0 for SIDOOR MDG400, MDG400 NMS, MDG700 NMS, M4 and M5 geared motors

Rubber-metal anti-vibration mount 6FB1104‑0AT02‑0AD0 for geared motors with door weights up to 180 kg

Rubber-metal anti-vibration mount 6FB1104‑0AT01‑0AD0 for geared motors with door weights greater than 180 kg

Mounting bracket

Two different mounting brackets are available with elongated holes:

• Mounting bracket 6FB1104‑0AT01‑0AS0 for mounting SIDOOR geared motors, for flexible accommodation of the rubber-bonded metal
• Mounting bracket 6FB1104‑0AT02‑0AS0 for the deflector unit, this enables the toothed belt to be set to the required belt tension.

Mounting bracket 6FB1104‑0AT01‑0AS0 for mounting the geared motor

Mounting bracket 6FB1104‑0AT02‑0AS0 for the deflector unit

DIN rail holder

The standard DIN rail holder 6FB1144‑0AT00‑3SA0 is available for mounting controllers on the TH 35 standard DIN rail according to IEC 60715.

Door clutch holder

The door clutch holder serves to connect the respective door leaf by means of a toothed belt while also functioning as a toothed-belt lock. One door clutch holder per door leaf is required. The toothed-belt lock can accommodate both open ends of the toothed belt.

A door clutch holder is available for each toothed belt width:

• Width 12 mm: 6FB1104‑0AT01‑0CP0
• Width 14 mm: 6FB1104‑0AT02‑0CP0

Door clutch holder 6FB1104‑0AT01‑0CP0 (packaging size = 1 unit)

Deflector unit

The deflector unit 6FB1104‑0AT03‑0AS0 contains an embedded belt pulley which can be mounted on the door system. The STS toothed belt is redirected via this deflector unit.

Deflector unit 6FB1104‑0AT03‑0AS0

STS toothed belt

The door system is moved between the end positions of the door using the STS toothed belts. Two different toothed belt lengths can be ordered for each toothed belt width.

• Toothed belt width 12 mm:
  • Length 4 m: 6FB1104‑0AT01‑0AB0
  • Length 45 m: 6FB1104‑0AT02‑0AB0
• Toothed belt width 14 mm:
  • Length 4 m: 6FB1104‑0AT03‑0AB0
  • Length 55 m: 6FB1104‑0AT04‑0AB0

Toothed belt 6FB1104‑0AT01‑0AB0 (width 12 mm, length 4 m)

Toothed belt 6FB1104‑0AT02‑0AB0 (width 12 mm, length 45 m)

For machine tool door drives only

CABLE-MDG hybrid connecting cables

These connecting cables connect the machine tool door drives to the SIDOOR MDG180, MDG400 and MDG400 NMS geared motors. Various lengths are available.

• Length 0.5 m: 6FB1104-0AT00-0CB5
• Length 1.5 m: 6FB1104-0AT01-0CB5
• Length 5 m: 6FB1104-0AT05-0CB0
• Length 7 m: 6FB1104-0AT07-0CB0
• Length 10 m: 6FB1104-0AT10-0CB0
• Length 15 m: 6FB1104-0AT15-0CB0
• Length 20 m: 6FB1104-0AT20-0CB0

SIDOOR CABLE-MDG

SIDOOR CABLE-MDG2 cable set

This cable set connects the ATD4xxW door controller to the SIDOOR MDG700 NMS geared motor. Various lengths are available.

• Length 5 m: 6FB1104-0AT05-0CB2
• Length 10 m: 6FB1104-0AT10-0CB2
• Length 15 m: 6FB1104-0AT15-0CB2
• Length 20 m: 6FB1104-0AT20-0CB2

Machine tool door drives are connected to a higher-level SIMATIC controller via the PB FC RS 485 PLUG 180 connector (6GK1500-0FC10) and the PB FC Standard Cable GP (6XV1830-0EH10), a standard bus cable with a special design for quick mounting. A SIMATIC RS 485/USS communication module is required on the controller side, such as the ET 200S electronic module (6ES7138-4DF11-0AB0) for the SIMATIC ET 200.