CPU 1215C . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на CPU 1215C

| | | | | | | |

Article number	6ES7215-1BG40-0XB0	6ES7215-1AG40-0XB0	6ES7215-1HG40-0XB0
	CPU 1215C, AC/DC/RLY, 14DI/10DO/2AI/2AO	CPU 1215C, DC/DC/DC, 14DI/10DO/2AI/2AO	CPU 1215C, DC/DC/RLY, 14DI/10DO/2AI/2AO
General information
Product type designation	CPU 1215C AC/DC/relay	CPU 1215C DC/DC/DC	CPU 1215C DC/DC/relay
Firmware version	V4.2	V4.2	V4.2
Engineering with
в—Џ Programming package	STEP 7 V14 or higher	STEP 7 V14 or higher	STEP 7 V14 or higher
Supply voltage
Rated value (DC)
в—Џ 24 V DC		Yes	Yes
permissible range, lower limit (DC)		20.4 V	20.4 V
permissible range, upper limit (DC)		28.8 V	28.8 V
Rated value (AC)
в—Џ 120 V AC	Yes
в—Џ 230 V AC	Yes
permissible range, lower limit (AC)	85 V
permissible range, upper limit (AC)	265 V
Reverse polarity protection		Yes	Yes
Line frequency
в—Џ permissible range, lower limit	47 Hz
в—Џ permissible range, upper limit	63 Hz
Load voltage L+
в—Џ Rated value (DC)		24 V	24 V
в—Џ permissible range, lower limit (DC)		20.4 V	20.4 V
в—Џ permissible range, upper limit (DC)		28.8 V	28.8 V
Input current
Current consumption (rated value)	100 mA at 120 V AC; 50 mA at 240 V AC	500 mA; CPU only	500 mA; CPU only
Current consumption, max.	300 mA at 120 V AC; 150 mA at 240 V AC	1 500 mA; CPU with all expansion modules	1 500 mA; CPU with all expansion modules
Inrush current, max.	20 A; at 264 V	12 A; at 28.8 V DC	12 A; at 28.8 V DC
IІt	0.8 AІ·s	0.5 AІ·s	0.8 AІ·s
Output current
for backplane bus (5 V DC), max.	1 600 mA; Max. 5 V DC for SM and CM	1 600 mA; Max. 5 V DC for SM and CM	1 600 mA; Max. 5 V DC for SM and CM
Encoder supply
24 V encoder supply
в—Џ 24 V	20.4 to 28.8V	L+ minus 4 V DC min.	L+ minus 4 V DC min.
Power loss
Power loss, typ.	14 W	12 W	12 W
Memory
Work memory
в—Џ integrated	125 kbyte	125 kbyte	125 kbyte
в—Џ expandable	No	No	No
Load memory
в—Џ integrated	4 Mbyte	4 Mbyte	4 Mbyte
в—Џ Plug-in (SIMATIC Memory Card), max.	with SIMATIC memory card	with SIMATIC memory card	with SIMATIC memory card
Backup
в—Џ present	Yes	Yes	Yes
в—Џ maintenance-free	Yes	Yes	Yes
в—Џ without battery	Yes	Yes	Yes
CPU processing times
for bit operations, typ.	0.08 µs; / instruction	0.08 µs; / instruction	0.08 µs; / instruction
for word operations, typ.	1.7 µs; / instruction	1.7 µs; / instruction	1.7 µs; / instruction
for floating point arithmetic, typ.	2.3 µs; / instruction	2.3 µs; / instruction	2.3 µs; / instruction
CPU-blocks
Number of blocks (total)	DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used	DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used	DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used
OB
в—Џ Number, max.	Limited only by RAM for code	Limited only by RAM for code	Limited only by RAM for code
Data areas and their retentivity
Retentive data area (incl. timers, counters, flags), max.	10 kbyte	10 kbyte	10 kbyte
Flag
в—Џ Number, max.	8 kbyte; Size of bit memory address area	8 kbyte; Size of bit memory address area	8 kbyte; Size of bit memory address area
Local data
в—Џ per priority class, max.	16 kbyte; Priority class 1 (program cycle): 16 KB, priority class 2 to 26: 6 KB	16 kbyte; Priority class 1 (program cycle): 16 KB, priority class 2 to 26: 6 KB	16 kbyte; Priority class 1 (program cycle): 16 KB, priority class 2 to 26: 6 KB
Process image
в—Џ Inputs, adjustable	1 kbyte	1 kbyte	1 kbyte
в—Џ Outputs, adjustable	1 kbyte	1 kbyte	1 kbyte
Hardware configuration
Number of modules per system, max.	3 comm. modules, 1 signal board, 8 signal modules	3 comm. modules, 1 signal board, 8 signal modules	3 comm. modules, 1 signal board, 8 signal modules
Time of day
Clock
в—Џ Hardware clock (real-time)	Yes	Yes	Yes
в—Џ Backup time	480 h; Typical	480 h; Typical	480 h; Typical
в—Џ Deviation per day, max.	±60 s/month at 25 °C	±60 s/month at 25 °C	±60 s/month at 25 °C
Digital inputs
Number of digital inputs	14; Integrated	14; Integrated	14; Integrated
в—Џ of which inputs usable for technological functions	6; HSC (High Speed Counting)	6; HSC (High Speed Counting)	6; HSC (High Speed Counting)
Source/sink input	Yes	Yes	Yes
Number of simultaneously controllable inputs
all mounting positions
вЂ” up to 40 °C, max.	14	14	14
Input voltage
в—Џ Rated value (DC)	24 V	24 V	24 V
в—Џ for signal "0"	5 V DC at 1 mA	5 V DC at 1 mA	5 V DC at 1 mA
в—Џ for signal "1"	15 V DC at 2.5 mA	15 V DC at 2.5 mA	15 V DC at 2.5 mA
Input delay (for rated value of input voltage)
for standard inputs
вЂ” parameterizable	Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four	0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four	Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four
вЂ” at "0" to "1", min.	0.2 ms	0.2 ms	0.2 ms
вЂ” at "0" to "1", max.	12.8 ms	12.8 ms	12.8 ms
for interrupt inputs
вЂ” parameterizable	Yes	Yes	Yes
for counter/technological functions
вЂ” parameterizable	Single phase: 3 @ 100 kHz & 3 @ 30 kHz, differential: 3 @ 80 kHz & 3 @ 30 kHz	Single phase: 3 @ 100 kHz & 3 @ 30 kHz, differential: 3 @ 80 kHz & 3 @ 30 kHz	Single phase: 3 @ 100 kHz & 3 @ 30 kHz, differential: 3 @ 80 kHz & 3 @ 30 kHz
Cable length
в—Џ shielded, max.	500 m; 50 m for technological functions	500 m; 50 m for technological functions	500 m; 50 m for technological functions
в—Џ unshielded, max.	300 m; For technological functions: No	300 m; For technological functions: No	300 m; For technological functions: No
Digital outputs
Number of digital outputs	10; Relays	10	10; Relays
в—Џ of which high-speed outputs		4; 100 kHz Pulse Train Output
Limitation of inductive shutdown voltage to		L+ (-48 V)
Switching capacity of the outputs
в—Џ with resistive load, max.	2 A	0.5 A	2 A
в—Џ on lamp load, max.	30 W with DC, 200 W with AC	5 W	30 W with DC, 200 W with AC
Output voltage
в—Џ for signal "0", max.		0.1 V; with 10 kOhm load
в—Џ for signal "1", min.		20 V
Output current
в—Џ for signal "1" rated value		0.5 A
в—Џ for signal "0" residual current, max.		0.1 mA
Output delay with resistive load
в—Џ "0" to "1", max.	10 ms; max.	1 µs	10 ms; max.
в—Џ "1" to "0", max.	10 ms; max.	5 µs	10 ms; max.
Switching frequency
в—Џ of the pulse outputs, with resistive load, max.		100 kHz
Relay outputs
в—Џ Number of operating cycles, max.	mechanically 10 million, at rated load voltage 100 000		mechanically 10 million, at rated load voltage 100 000
Cable length
в—Џ shielded, max.	500 m	500 m	500 m
в—Џ unshielded, max.	150 m	150 m	150 m
Analog inputs
Number of analog inputs	2	2	2
Input ranges
в—Џ Voltage	Yes	Yes	Yes
Input ranges (rated values), voltages
в—Џ 0 to +10 V	Yes	Yes	Yes
в—Џ Input resistance (0 to 10 V)	в‰Ґ100k ohms	в‰Ґ100k ohms	в‰Ґ100k ohms
Cable length
в—Џ shielded, max.	100 m; twisted and shielded	100 m; twisted and shielded	100 m; twisted and shielded
Analog outputs
Number of analog outputs	2	2	2
Output ranges, current
в—Џ 0 to 20 mA	Yes	Yes	Yes
Analog value generation for the inputs
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.	10 bit	10 bit	10 bit
в—Џ Integration time, parameterizable	Yes	Yes	Yes
в—Џ Conversion time (per channel)	625 µs	625 µs	625 µs
Analog value generation for the outputs
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.		10 bit	10 bit
Encoder
Connectable encoders
в—Џ 2-wire sensor	Yes	Yes	Yes
1. Interface
Interface type	PROFINET	PROFINET	PROFINET
Physics	Ethernet	Ethernet	Ethernet
Isolated	Yes	Yes	Yes
automatic detection of transmission rate	Yes	Yes	Yes
Autonegotiation	Yes	Yes	Yes
Autocrossing	Yes	Yes	Yes
Interface types
в—Џ Number of ports	2	2	2
в—Џ integrated switch	Yes	Yes	Yes
Functionality
в—Џ PROFINET IO Controller	Yes	Yes	Yes
в—Џ PROFINET IO Device	Yes	Yes	Yes
в—Џ SIMATIC communication	Yes	Yes	Yes
в—Џ Open IE communication	Yes	Yes	Yes
в—Џ Web server	Yes	Yes	Yes
в—Џ Media redundancy	Yes; as MRP client	Yes; as MRP client	Yes; as MRP client
PROFINET IO Controller
в—Џ Transmission rate, max.	100 Mbit/s	100 Mbit/s	100 Mbit/s
Services
вЂ” PG/OP communication	Yes	Yes	Yes
вЂ” S7 routing	Yes	Yes	Yes
вЂ” Isochronous mode	No	No	No
вЂ” Open IE communication	Yes	Yes	Yes
вЂ” IRT	No	No	No
вЂ” MRP	Yes; as MRP client	Yes; as MRP client	Yes; as MRP client
вЂ” MRPD	No	No	No
вЂ” PROFIenergy	No	No	No
вЂ” Prioritized startup	Yes	Yes	Yes
вЂ” Number of IO devices with prioritized startup, max.	16	16	16
вЂ” Number of connectable IO Devices, max.	16	16	16
вЂ” Number of connectable IO Devices for RT, max.	16	16	16
вЂ” of which in line, max.	16	16	16
вЂ” Activation/deactivation of IO Devices	Yes	Yes	Yes
вЂ” Number of IO Devices that can be simultaneously activated/deactivated, max.	8	8	8
вЂ” Updating time	The minimum value of the update time also depends on the communication component set for PROFINET IO, on the number of IO devices and the quantity of configured user data.	The minimum value of the update time also depends on the communication component set for PROFINET IO, on the number of IO devices and the quantity of configured user data.	The minimum value of the update time also depends on the communication component set for PROFINET IO, on the number of IO devices and the quantity of configured user data.
PROFINET IO Device
Services
вЂ” PG/OP communication	Yes	Yes	Yes
вЂ” S7 routing	Yes	Yes	Yes
вЂ” Isochronous mode	No	No	No
вЂ” Open IE communication	Yes	Yes	Yes
вЂ” IRT	No	No	No
вЂ” MRP	Yes; as MRP client	Yes; as MRP client	Yes; as MRP client
вЂ” MRPD	No	No	No
вЂ” PROFIenergy	Yes	Yes	Yes
вЂ” Shared device	Yes	Yes	Yes
вЂ” Number of IO Controllers with shared device, max.	2	2	2
Protocols
Supports protocol for PROFINET IO	Yes	Yes	Yes
PROFIBUS	Yes; CM 1243-5 required	Yes; CM 1243-5 required	Yes; CM 1243-5 required
AS-Interface	Yes; CM 1243-2 required	Yes; CM 1243-2 required	Yes; CM 1243-2 required
Protocols (Ethernet)
в—Џ TCP/IP	Yes	Yes	Yes
в—Џ DHCP	No	No	No
в—Џ SNMP	Yes	Yes	Yes
в—Џ DCP	Yes	Yes	Yes
в—Џ LLDP	Yes	Yes	Yes
Open IE communication
в—Џ TCP/IP	Yes	Yes	Yes
вЂ” Data length, max.	8 kbyte	8 kbyte	8 kbyte
в—Џ ISO-on-TCP (RFC1006)	Yes	Yes	Yes
вЂ” Data length, max.	8 kbyte	8 kbyte	8 kbyte
в—Џ UDP	Yes	Yes	Yes
вЂ” Data length, max.	1 472 byte	1 472 byte	1 472 byte
Web server
в—Џ User-defined websites	Yes	Yes	Yes
Further protocols
в—Џ MODBUS	Yes	Yes	Yes
Communication functions
S7 communication
в—Џ supported	Yes	Yes	Yes
в—Џ as server	Yes	Yes	Yes
в—Џ as client	Yes	Yes	Yes
в—Џ User data per job, max.	See online help (S7 communication, user data size)	See online help (S7 communication, user data size)	See online help (S7 communication, user data size)
Web server
в—Џ supported	Yes	Yes	Yes
Number of connections
в—Џ overall	16; dynamically	16; dynamically	16; dynamically
Test commissioning functions
Status/control
в—Џ Status/control variable	Yes	Yes	Yes
в—Џ Variables	Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters	Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters	Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters
Forcing
в—Џ Forcing	Yes	Yes	Yes
Diagnostic buffer
в—Џ present	Yes	Yes	Yes
Traces
в—Џ Number of configurable Traces	2	2	2
в—Џ Memory size per trace, max.	512 kbyte	512 kbyte	512 kbyte
Interrupts/diagnostics/status information
Diagnostics indication LED
в—Џ RUN/STOP LED	Yes	Yes	Yes
в—Џ ERROR LED	Yes	Yes	Yes
в—Џ MAINT LED	Yes	Yes	Yes
Integrated Functions
Number of counters	6	6	6
Counting frequency (counter) max.	100 kHz	100 kHz	100 kHz
Frequency measurement	Yes	Yes	Yes
controlled positioning	Yes	Yes	Yes
Number of position-controlled positioning axes, max.	8	8	8
Number of positioning axes via pulse-direction interface	Up to 4 with SB 1222	4; With integrated outputs	Up to 4 with SB 1222
PID controller	Yes	Yes	Yes
Number of alarm inputs	4	4	4
Number of pulse outputs		4
Limit frequency (pulse)		100 kHz
Potential separation
Potential separation digital inputs
в—Џ Potential separation digital inputs	500V AC for 1 minute	No	500V AC for 1 minute
в—Џ between the channels, in groups of	1	1	1
Potential separation digital outputs
в—Џ Potential separation digital outputs	Relays	Yes	Relays
в—Џ between the channels	No	No	No
в—Џ between the channels, in groups of	2	1	2
EMC
Interference immunity against discharge of static electricity
в—Џ Interference immunity against discharge of static electricity acc. to IEC 61000-4-2	Yes	Yes	Yes
вЂ” Test voltage at air discharge	8 kV	8 kV	8 kV
вЂ” Test voltage at contact discharge	6 kV	6 kV	6 kV
Interference immunity to cable-borne interference
в—Џ Interference immunity on supply lines acc. to IEC 61000-4-4	Yes	Yes	Yes
в—Џ Interference immunity on signal cables acc. to IEC 61000-4-4	Yes	Yes	Yes
Interference immunity against voltage surge
в—Џ on the supply lines acc. to IEC 61000-4-5	Yes	Yes	Yes
Interference immunity against conducted variable disturbance induced by high-frequency fields
в—Џ Interference immunity against high-frequency radiation acc. to IEC 61000-4-6	Yes	Yes	Yes
Emission of radio interference acc. to EN 55 011
в—Џ Limit class A, for use in industrial areas	Yes; Group 1	Yes; Group 1	Yes; Group 1
в—Џ Limit class B, for use in residential areas	Yes; When appropriate measures are used to ensure compliance with the limits for Class B according to EN 55011	Yes; When appropriate measures are used to ensure compliance with the limits for Class B according to EN 55011	Yes; When appropriate measures are used to ensure compliance with the limits for Class B according to EN 55011
Degree and class of protection
Degree of protection acc. to EN 60529
в—Џ IP20	Yes	Yes	Yes
Standards, approvals, certificates
CE mark	Yes	Yes	Yes
UL approval	Yes	Yes	Yes
cULus	Yes	Yes	Yes
FM approval	Yes	Yes	Yes
RCM (formerly C-TICK)	Yes	Yes	Yes
KC approval	Yes	Yes	Yes
Marine approval	Yes	Yes	Yes
Ambient conditions
Free fall
в—Џ Fall height, max.	0.3 m; five times, in product package	0.3 m; five times, in product package	0.3 m; five times, in product package
Ambient temperature during operation
в—Џ min.	-20 °C	-20 °C	-20 °C
в—Џ max.	60 °C; Number of simultaneously activated inputs or outputs 7 or 5 (no adjacent points) at 60 °C horizontal or 50 °C vertical, 14 or 10 at 55 °C horizontal or 45 °C vertical	60 °C; Number of simultaneously activated inputs or outputs 7 or 5 (no adjacent points) at 60 °C horizontal or 50 °C vertical, 14 or 10 at 55 °C horizontal or 45 °C vertical	60 °C; Number of simultaneously activated inputs or outputs 7 or 5 (no adjacent points) at 60 °C horizontal or 50 °C vertical, 14 or 10 at 55 °C horizontal or 45 °C vertical
в—Џ horizontal installation, min.	-20 °C	-20 °C	-20 °C
в—Џ horizontal installation, max.	60 °C	60 °C	60 °C
в—Џ vertical installation, min.	-20 °C	-20 °C	-20 °C
в—Џ vertical installation, max.	50 °C	50 °C	50 °C
Ambient temperature during storage/transportation
в—Џ min.	-40 °C	-40 °C	-40 °C
в—Џ max.	70 °C	70 °C	70 °C
Air pressure acc. to IEC 60068-2-13
в—Џ Operation, min.	795 hPa	795 hPa	795 hPa
в—Џ Operation, max.	1 080 hPa	1 080 hPa	1 080 hPa
в—Џ Storage/transport, min.	660 hPa	660 hPa	660 hPa
в—Џ Storage/transport, max.	1 080 hPa	1 080 hPa	1 080 hPa
в—Џ Installation altitude, min.	-1 000 m	-1 000 m	-1 000 m
в—Џ Installation altitude, max.	2 000 m	2 000 m	2 000 m
Relative humidity
в—Џ Operation, max.	95 %; no condensation	95 %; no condensation	95 %; no condensation
Vibrations
в—Џ Vibration resistance during operation acc. to IEC 60068-2-6	2 g (m/sІ) wall mounting, 1 g (m/sІ) DIN rail	2 g (m/sІ) wall mounting, 1 g (m/sІ) DIN rail	2 g (m/sІ) wall mounting, 1 g (m/sІ) DIN rail
в—Џ Operation, tested according to IEC 60068-2-6	Yes	Yes	Yes
Shock testing
в—Џ tested according to IEC 60068-2-27	Yes; IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms	Yes; IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms	Yes; IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms
Pollutant concentrations
в—Џ SO2 at RH < 60% without condensation	S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60% condensation-free	S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60% condensation-free	S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60% condensation-free
Programming
Programming language
вЂ” LAD	Yes	Yes	Yes
вЂ” FBD	Yes	Yes	Yes
вЂ” SCL	Yes	Yes	Yes
Know-how protection
в—Џ User program protection/password protection	Yes	Yes	Yes
в—Џ Copy protection	Yes	Yes	Yes
в—Џ Block protection	Yes	Yes	Yes
Access protection
в—Џ Protection level: Write protection	Yes	Yes	Yes
в—Џ Protection level: Read/write protection	Yes	Yes	Yes
в—Џ Protection level: Complete protection	Yes	Yes	Yes
Cycle time monitoring
в—Џ adjustable	Yes	Yes	Yes
Dimensions
Width	130 mm	130 mm	130 mm
Height	100 mm	100 mm	100 mm
Depth	75 mm	75 mm	75 mm
Weights
Weight, approx.	550 g	500 g	585 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания