Information on SIMATIC ET 200S

The SIMATIC ET 200SP, the successor system of the proven SIMATIC ET 200S, which has been established since 2012, offers a number of advantages. This is why we advise you to use the successor system SIMATIC ET 200SP for new automation concepts.

IO-Link 4SI electronic module

SIRIUS 4SI electronic module for ET 200S

The 4SI IO‑Link electronic module is an IO‑Link master and enables easy integration of sensors and actuators from different manufacturers in the multifunctional, distributed I/O system SIMATIC ET 200S at a total of four ports.

Features

• Up to 4 SIRIUS devices can be connected at the 4 ports of the SIRIUS 4SI electronic module.
  Load feeders with 3RA27 function modules can even be bundled in groups of four devices on one IO-Link port. This means that up to 16 load feeders can be connected to the controller at an IO-Link master module.
• The electronic module 4SI SIRIUS is 15 mm in width and can be used with the following universal terminal modules:
  • TM-E15S26-A1 (screw terminal)
  • TM-E15C26-A1 (spring-loaded terminal)
  • TM-E15N26-A1 (Fast Connect)
• Supports firmware updates (STEP 7 V5.4 SP5 and higher)
• Corresponds to IO-Link specification V1.0