SIPLUS PS DC UPS module 40 A . Обзор. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS PS DC UPS module 40 A

| | | |

Compact design, only 102 mm wide
Completely uninterruptible mains buffering through immediate electronic connection of the battery as soon as the DC UPS input voltage falls below the value set by means of DIP switches.
High level of safety and availability through monitoring of operational readiness, battery supply line, battery aging (message "Battery replacement necessary") and battery charge (message "Battery charged >85%")
Support for automatic warm restart of industrial PCs through selectable shutdown characteristics.
Optionally with USB interface.
Software tool as download at
http://www.siemens.com/sitop
Executes under Windows NT4.0, Windows 2000 and Windows XP.

Note:

SIPLUS extreme products are based on Siemens standard products. The contents listed here were adopted from the respective standard products. SIPLUS extreme specific information was added.

SIPLUS PS DC USP 24 V/40 A
Article No.	6AG1 931-2FC21-7AA0
Article No. based on	6EP1 931-2FC21
Ambient temperature range	-25 ... +70 °C
Conformal coating	Coating of the printed circuit boards and the electronic components
Technical specifications	The technical data of the standard product applies except for the ambient conditions.
Ambient conditions
Relative humidity	100%, condensation/frost permissible. No commissioning if condensation present.
Biologically active substances, compliance with EN 60721-3-3	Class 3B2 mold and fungal spores (excluding fauna). The supplied plug covers must remain in place over the unused interfaces during operation!
Chemically active substances, compliance with EN 60721-3-3	Class 3C4 incl. salt spray in accordance with EN60068-2-52 (degree of severity 3). The supplied plug covers must remain in place over the unused interfaces during operation!
Mechanically active substances, compliance with EN 60721-3-3	Class 3S4 incl. sand, dust. The supplied plug covers must remain in place over the unused interfaces during operation!
Air pressure (depending on the highest positive temperature range specified)	1 080 ... 795 hPa (-1 000 ... +2 000 m) see ambient temperature range 795 ... 658 hPa (+2000 ... +3500 m) derating 10 K 658 ... 540 hPa (+3500 ... +5000 m) derating 20 K

Technical documentation on SIPLUS can be found here:
http://www.siemens.com/siplus-extreme