SIPLUS S7-300 CPU 312C . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS S7-300 CPU 312C

| | | | | | |

Article number	6AG1312-5BF04-2AY0	6AG1312-5BF04-7AB0
	SIPLUS S7-300 CPU312C EN50155	SIPLUS S7-300 CPU312C
General information
HW functional status	01	01
Firmware version	V3.3	V3.3
Engineering with
в—Џ Programming package	STEP 7 V5.5 + SP1 or higher or STEP 7 V5.3 + SP2 or higher with HSP 203	STEP 7 V5.5 + SP1 or higher or STEP 7 V5.3 + SP2 or higher with HSP 203
Supply voltage
Rated value (DC)
в—Џ 24 V DC	Yes; A power supply according to EN 50155 shall be used	Yes
permissible range, lower limit (DC)	19.2 V	19.2 V
permissible range, upper limit (DC)	28.8 V	28.8 V
external protection for power supply lines (recommendation)	Miniature circuit breaker, type C; min. 2 A; miniature circuit breaker type B, min. 4 A	Miniature circuit breaker, type C; min. 2 A; miniature circuit breaker type B, min. 4 A
Mains buffering
в—Џ Mains/voltage failure stored energy time	5 ms	5 ms
в—Џ Repeat rate, min.	1 s	1 s
Digital outputs
вЂ” Rated value (DC)	24 V	24 V
вЂ” Reverse polarity protection	No	No
Input current
Current consumption (rated value)	570 mA	570 mA
Current consumption (in no-load operation), typ.	90 mA	90 mA
Inrush current, typ.	5 A	5 A
IІt	0.7 AІ·s	0.7 AІ·s
Digital outputs
в—Џ from load voltage L+, max.	25 mA	25 mA
Power loss
Power loss, typ.	8 W	8 W
Memory
Work memory
в—Џ integrated	64 kbyte	64 kbyte
в—Џ expandable	No	No
в—Џ Size of retentive memory for retentive data blocks	64 kbyte	64 kbyte
Load memory
в—Џ Plug-in (MMC)	Yes	Yes
в—Џ Plug-in (MMC), max.	8 Mbyte	8 Mbyte
в—Џ Data management on MMC (after last programming), min.	10 y	10 y
Backup
в—Џ present	Yes; Guaranteed by MMC (maintenance-free)	Yes; Guaranteed by MMC (maintenance-free)
в—Џ without battery	Yes; Program and data	Yes; Program and data
CPU processing times
for bit operations, typ.	0.1 µs	0.1 µs
for word operations, typ.	0.24 µs	0.24 µs
for fixed point arithmetic, typ.	0.32 µs	0.32 µs
for floating point arithmetic, typ.	1.1 µs	1.1 µs
CPU-blocks
Number of blocks (total)	1 024; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used.	1 024; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used.
DB
в—Џ Number, max.	1 024; Number range: 1 to 16000	1 024; Number range: 1 to 16000
в—Џ Size, max.	64 kbyte	64 kbyte
FB
в—Џ Number, max.	1 024; Number range: 0 to 7999	1 024; Number range: 0 to 7999
в—Џ Size, max.	64 kbyte	64 kbyte
FC
в—Џ Number, max.	1 024; Number range: 0 to 7999	1 024; Number range: 0 to 7999
в—Џ Size, max.	64 kbyte	64 kbyte
OB
в—Џ Description	see instruction list	see instruction list
в—Џ Size, max.	64 kbyte	64 kbyte
в—Џ Number of free cycle OBs	1; OB 1	1; OB 1
в—Џ Number of time alarm OBs	1; OB 10	1; OB 10
в—Џ Number of delay alarm OBs	2; OB 20, 21	2; OB 20, 21
в—Џ Number of cyclic interrupt OBs	4; OB 32, 33, 34, 35	4; OB 32, 33, 34, 35
в—Џ Number of process alarm OBs	1; OB 40	1; OB 40
в—Џ Number of startup OBs	1; OB 100	1; OB 100
в—Џ Number of asynchronous error OBs	4; OB 80, 82, 85, 87	4; OB 80, 82, 85, 87
в—Џ Number of synchronous error OBs	2; OB 121, 122	2; OB 121, 122
Nesting depth
в—Џ per priority class	16	16
в—Џ additional within an error OB	4	4
Counters, timers and their retentivity
S7 counter
в—Џ Number	256	256
Retentivity
вЂ” adjustable	Yes	Yes
вЂ” lower limit	0	0
вЂ” upper limit	255	255
вЂ” preset	Z 0 to Z 7	Z 0 to Z 7
Counting range
вЂ” lower limit	0	0
вЂ” upper limit	999	999
IEC counter
в—Џ Number	Unlimited (limited only by RAM capacity)	Unlimited (limited only by RAM capacity)
S7 times
в—Џ Number	256	256
Retentivity
вЂ” adjustable	Yes	Yes
вЂ” lower limit	0	0
вЂ” upper limit	255	255
вЂ” preset	No retentivity	No retentivity
Time range
вЂ” lower limit	10 ms	10 ms
вЂ” upper limit	9 990 s	9 990 s
IEC timer
в—Џ present	Yes	Yes
в—Џ Type	SFB	SFB
в—Џ Number	Unlimited (limited only by RAM capacity)	Unlimited (limited only by RAM capacity)
Data areas and their retentivity
retentive data area in total	All, max. 64 KB	All, max. 64 KB
Flag
в—Џ Number, max.	256 byte	256 byte
в—Џ Retentivity available	Yes; MB 0 to MB 255	Yes; MB 0 to MB 255
в—Џ Retentivity preset	MB 0 to MB 15	MB 0 to MB 15
в—Џ Number of clock memories	8; 1 memory byte	8; 1 memory byte
Data blocks
в—Џ Retentivity adjustable	Yes; via non-retain property on DB	Yes; via non-retain property on DB
в—Џ Retentivity preset	Yes	Yes
Local data
в—Џ per priority class, max.	32 kbyte; Max. 2048 bytes per block	32 kbyte; Max. 2048 bytes per block
Address area
I/O address area
в—Џ Inputs	1 024 byte	1 024 byte
в—Џ Outputs	1 024 byte	1 024 byte
of which distributed
вЂ” Inputs	none	none
вЂ” Outputs	none	none
Process image
в—Џ Inputs	1 024 byte	1 024 byte
в—Џ Outputs	1 024 byte	1 024 byte
в—Џ Inputs, adjustable	1 024 byte	1 024 byte
в—Џ Outputs, adjustable	1 024 byte	1 024 byte
в—Џ Inputs, default	128 byte	128 byte
в—Џ Outputs, default	128 byte	128 byte
Default addresses of the integrated channels
вЂ” Digital inputs	124.0 to 125.1	124.0 to 125.1
вЂ” Digital outputs	124.0 to 124.5	124.0 to 124.5
Digital channels
в—Џ Inputs	266	266
вЂ” of which central	266	266
в—Џ Outputs	262	262
вЂ” of which central	262	262
Analog channels
в—Џ Inputs	64	64
вЂ” of which central	64	64
в—Џ Outputs	64	64
вЂ” of which central	64	64
Hardware configuration
Number of expansion units, max.	0	0
Number of DP masters
в—Џ integrated	none	none
в—Џ via CP	4	4
Number of operable FMs and CPs (recommended)
в—Џ FM	8	8
в—Џ CP, PtP	8	8
в—Џ CP, LAN	4	4
Rack
в—Џ Racks, max.	1	1
в—Џ Modules per rack, max.	8	8
Time of day
Clock
в—Џ Software clock	Yes	Yes
в—Џ retentive and synchronizable	No; Buffered: No, Can be synchronized: Yes	No; Buffered: No, Can be synchronized: Yes
в—Џ Deviation per day, max.	10 s; Typ.: 2 s	10 s; Typ.: 2 s
в—Џ Behavior of the clock following POWER-ON	The clock continues at the time of day it had when power was switched off	The clock continues at the time of day it had when power was switched off
Operating hours counter
в—Џ Number	1	1
в—Џ Number/Number range	0	0
в—Џ Range of values	0 to 2^31 hours (when using SFC 101)	0 to 2^31 hours (when using SFC 101)
в—Џ Granularity	1 hour	1 hour
в—Џ retentive	Yes; Must be restarted at each restart	Yes; Must be restarted at each restart
Clock synchronization
в—Џ supported	Yes	Yes
в—Џ to MPI, master	Yes	Yes
в—Џ to MPI, slave	Yes	Yes
в—Џ in AS, master	Yes	Yes
в—Џ in AS, slave	No	No
Digital inputs
Number of digital inputs	10	10
в—Џ of which inputs usable for technological functions	8	8
integrated channels (DI)	10	10
Input characteristic curve in accordance with IEC 61131, type 1	Yes	Yes
horizontal installation
вЂ” up to 40 °C, max.	10	10
вЂ” up to 60 °C, max.	5	5; up to 70 °C
vertical installation
вЂ” up to 40 °C, max.	5	5
Input voltage
в—Џ Rated value (DC)	24 V	24 V
в—Џ for signal "0"	-3 to +5V	-3 to +5V
в—Џ for signal "1"	+15 to +30V	+15 to +30V
Input current
в—Џ for signal "1", typ.	8 mA	8 mA
Input delay (for rated value of input voltage)
for standard inputs
вЂ” parameterizable	Yes; 0.1 / 0.3 / 3 / 15 ms (You can reconfigure the input delay of the standard inputs during program runtime. Please note that under certain circumstances your newly set filter time may not be effective until the next filter cycle.)	Yes; 0.1 / 0.3 / 3 / 15 ms (You can reconfigure the input delay of the standard inputs during program runtime. Please note that under certain circumstances your newly set filter time may not be effective until the next filter cycle.)
вЂ” Rated value	3 ms	3 ms
for counter/technological functions
вЂ” at "0" to "1", max.	48 µs; Minimum pulse width/minimum pause between pulses at maximum counting frequency	48 µs; Minimum pulse width/minimum pause between pulses at maximum counting frequency
Cable length
в—Џ shielded, max.	1 000 m; 100 m for technological functions	1 000 m; 100 m for technological functions
в—Џ unshielded, max.	600 m; For technological functions: No	600 m; For technological functions: No
for technological functions
вЂ” shielded, max.	100 m; at maximum count frequency	100 m; at maximum count frequency
вЂ” unshielded, max.	not allowed	not allowed
Digital outputs
Number of digital outputs	6	6
в—Џ of which high-speed outputs	2; Notice: You cannot connect the fast outputs of your CPU in parallel	2; Notice: You cannot connect the fast outputs of your CPU in parallel
integrated channels (DO)	6	6
Short-circuit protection	Yes; Clocked electronically	Yes; Clocked electronically
в—Џ Response threshold, typ.	1 A	1 A
Limitation of inductive shutdown voltage to	L+ (-48 V)	L+ (-48 V)
Controlling a digital input	Yes	Yes
Switching capacity of the outputs
в—Џ on lamp load, max.	5 W	5 W
Load resistance range
в—Џ lower limit	48 в„¦	48 в„¦
в—Џ upper limit	4 kв„¦	4 kв„¦
Output voltage
в—Џ for signal "1", min.	L+ (-0.8 V)	L+ (-0.8 V)
Output current
в—Џ for signal "1" rated value	500 mA	500 mA
в—Џ for signal "1" permissible range, min.	5 mA	5 mA
в—Џ for signal "1" permissible range, max.	0.6 A	0.6 A
в—Џ for signal "1" minimum load current	5 mA	5 mA
в—Џ for signal "0" residual current, max.	0.5 mA	0.5 mA
Parallel switching of two outputs
в—Џ for uprating	No	No
в—Џ for redundant control of a load	Yes	Yes
Switching frequency
в—Џ with resistive load, max.	100 Hz	100 Hz
в—Џ with inductive load, max.	0.5 Hz	0.5 Hz
в—Џ on lamp load, max.	100 Hz	100 Hz
в—Џ of the pulse outputs, with resistive load, max.	2.5 kHz	2.5 kHz
horizontal installation
вЂ” up to 40 °C, max.	2 A	2 A
вЂ” up to 60 °C, max.	1.5 A	1.5 A; up to 70 °C
vertical installation
вЂ” up to 40 °C, max.	1.5 A	1.5 A
Cable length
в—Џ shielded, max.	1 000 m	1 000 m
в—Џ unshielded, max.	600 m	600 m
Analog inputs
Number of analog inputs	0	0
integrated channels (AI)	0	0
Analog outputs
Number of analog outputs	0	0
integrated channels (AO)	0	0
Connectable encoders
в—Џ 2-wire sensor	Yes	Yes
вЂ” permissible quiescent current (2-wire sensor), max.	1.5 mA	1.5 mA
Interfaces
Number of industrial Ethernet interfaces	0	0
Number of PROFINET interfaces	0	0
Number of RS 485 interfaces	1; MPI	1; MPI
Number of RS 422 interfaces	0	0
1. Interface
Interface type	Integrated RS 485 interface	Integrated RS 485 interface
Physics	RS 485	RS 485
Isolated	No	No
Power supply to interface (15 to 30 V DC), max.	200 mA	200 mA
Functionality
в—Џ MPI	Yes	Yes
в—Џ PROFIBUS DP master	No	No
в—Џ PROFIBUS DP slave	No	No
в—Џ Point-to-point connection	No	No
MPI
в—Џ Transmission rate, max.	187.5 kbit/s	187.5 kbit/s
Services
вЂ” PG/OP communication	Yes	Yes
вЂ” Routing	No	No
вЂ” Global data communication	Yes	Yes
вЂ” S7 basic communication	Yes	Yes
вЂ” S7 communication	Yes; Only server, configured on one side	Yes; Only server, configured on one side
вЂ” S7 communication, as client	No; but via CP and loadable FB	No; but via CP and loadable FB
вЂ” S7 communication, as server	Yes	Yes
Communication functions
PG/OP communication	Yes	Yes
Data record routing	No	No
Global data communication
в—Џ supported	Yes	Yes
в—Џ Number of GD loops, max.	8	8
в—Џ Number of GD packets, max.	8	8
в—Џ Number of GD packets, transmitter, max.	8	8
в—Џ Number of GD packets, receiver, max.	8	8
в—Џ Size of GD packets, max.	22 byte	22 byte
в—Џ Size of GD packet (of which consistent), max.	22 byte	22 byte
S7 basic communication
в—Џ supported	Yes	Yes
в—Џ User data per job, max.	76 byte	76 byte
в—Џ User data per job (of which consistent), max.	76 byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server)	76 byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server)
S7 communication
в—Џ supported	Yes	Yes
в—Џ as server	Yes	Yes
в—Џ as client	Yes; Via CP and loadable FB	Yes; Via CP and loadable FB
в—Џ User data per job, max.	180 byte; (with PUT/GET)	180 byte; (with PUT/GET)
в—Џ User data per job (of which consistent), max.	240 byte; as server	240 byte; as server
S5 compatible communication
в—Џ supported	Yes; via CP and loadable FC	Yes; via CP and loadable FC
Number of connections
в—Џ overall	6	6
в—Џ usable for PG communication	5	5
вЂ” reserved for PG communication	1	1
вЂ” adjustable for PG communication, min.	1	1
вЂ” adjustable for PG communication, max.	5	5
в—Џ usable for OP communication	5	5
вЂ” reserved for OP communication	1	1
вЂ” adjustable for OP communication, min.	1	1
вЂ” adjustable for OP communication, max.	5	5
в—Џ usable for S7 basic communication	2	2
вЂ” reserved for S7 basic communication	0	0
вЂ” adjustable for S7 basic communication, min.	0	0
вЂ” adjustable for S7 basic communication, max.	2	2
S7 message functions
Number of login stations for message functions, max.	6; Depending on the configured connections for PG/OP and S7 basic communication	6; Depending on the configured connections for PG/OP and S7 basic communication
Process diagnostic messages	Yes	Yes
simultaneously active Alarm-S blocks, max.	300	300
Test commissioning functions
Status block	Yes; Up to 2 simultaneously	Yes; Up to 2 simultaneously
Single step	Yes	Yes
Number of breakpoints	4	4
Status/control
в—Џ Status/control variable	Yes	Yes
в—Џ Variables	Inputs, outputs, memory bits, DB, times, counters	Inputs, outputs, memory bits, DB, times, counters
в—Џ Number of variables, max.	30	30
вЂ” of which status variables, max.	30	30
вЂ” of which control variables, max.	14	14
Forcing
в—Џ Forcing	Yes	Yes
в—Џ Forcing, variables	Inputs, outputs	Inputs, outputs
в—Џ Number of variables, max.	10	10
Diagnostic buffer
в—Џ present	Yes	Yes
в—Џ Number of entries, max.	500	500
вЂ” adjustable	No	No
вЂ” of which powerfail-proof	100; Only the last 100 entries are retained	100; Only the last 100 entries are retained
в—Џ Number of entries readable in RUN, max.	499	499
вЂ” can be set	Yes; From 10 to 499	Yes; From 10 to 499
вЂ” preset	10	10
Service data
в—Џ can be read out	Yes	Yes
Interrupts/diagnostics/status information
Diagnostics indication LED
в—Џ Status indicator digital input (green)	Yes	Yes
в—Џ Status indicator digital output (green)	Yes	Yes
Integrated Functions
Number of counters	2; See "Technological Functions" manual	2; See "Technological Functions" manual
Counting frequency (counter) max.	10 kHz	10 kHz
Frequency measurement	Yes	Yes
Number of frequency meters	2; up to 10 kHz (see "Technological Functions" manual)	2; up to 10 kHz (see "Technological Functions" manual)
controlled positioning	No	No
integrated function blocks (closed-loop control)	No	No
PID controller	No	No
Number of pulse outputs	2; Pulse width modulation up to 2.5 kHz (see "Technological Functions" Manual)	2; Pulse width modulation up to 2.5 kHz (see "Technological Functions" Manual)
Limit frequency (pulse)	2.5 kHz	2.5 kHz
Potential separation
Potential separation digital inputs
в—Џ Potential separation digital inputs	Yes	Yes
в—Џ between the channels	No	No
в—Џ between the channels and backplane bus	Yes	Yes
Potential separation digital outputs
в—Џ Potential separation digital outputs	Yes	Yes
в—Џ between the channels	No	No
в—Џ between the channels and backplane bus	Yes	Yes
Permissible potential difference
between different circuits	75 V DC/60 V AC	75 V DC/60 V AC
Isolation
Isolation tested with	500V AC for 1 minute	600 V DC
Standards, approvals, certificates
CE mark	Yes	Yes
UL approval	Yes	Yes
FM approval	No	No
RCM (formerly C-TICK)	Yes	Yes
KC approval	Yes	Yes
EAC (formerly Gost-R)	Yes	Yes
Railway application
в—Џ EN 50155	Yes; Sections 4, 5 and 12; no further agreements apply; T1, Category 1, Class A/B
Use in hazardous areas
в—Џ ATEX	No	Yes
Ambient conditions
Ambient temperature during operation
в—Џ min.	-25 °C; = Tmin	-25 °C; = Tmin
в—Џ max.	60 °C; = Tmax; the rated temperature range of -25 ... +55 °C (T1) applies for the use on railway vehicles according to EN50155	70 °C; = Tmax; 60 °C @ UL/cUL, ATEX and FM use
Ambient temperature during storage/transportation
в—Џ min.	-40 °C	-40 °C
в—Џ max.	70 °C	70 °C
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation in corrosive atmospheres!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Configuration
Configuration software
в—Џ STEP 7	Yes; STEP 7 V5.5 + SP1 or higher or STEP 7 V5.3 + SP2 or higher with HSP 203	Yes; STEP 7 V5.5 + SP1 or higher or STEP 7 V5.3 + SP2 or higher with HSP 203
в—Џ STEP 7 Lite	No	No
Programming
в—Џ Command set	see instruction list	see instruction list
в—Џ Nesting levels	8	8
в—Џ System functions (SFC)	see instruction list	see instruction list
в—Џ System function blocks (SFB)	see instruction list	see instruction list
Programming language
вЂ” LAD	Yes	Yes
вЂ” FBD	Yes	Yes
вЂ” STL	Yes	Yes
вЂ” SCL	Yes	Yes
вЂ” GRAPH	Yes	Yes
вЂ” HiGraph®	Yes	Yes
Know-how protection
в—Џ User program protection/password protection	Yes	Yes
в—Џ Block encryption	Yes; With S7 block Privacy	Yes; With S7 block Privacy
Dimensions
Width	80 mm	80 mm
Height	125 mm	125 mm
Depth	130 mm	130 mm
Weights
Weight, approx.	410 g	410 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания