Accessory set for 2, 3 and 5-spindle valve manifolds (connection: valve manifold-pressure transmitter)

2-spindle valve manifold DN 5 with flange connection

• F32: 2 screws ⁷/₁₆-20 UNF x 2 inch to ASME B18.2.1, 1 O-ring (FPM 90)
• F35: 2 screws ⁷/₁₆-20 UNF x 2 inch to ASME B18.2.1, 1 flat gasket
• F12: 2 screws M10x50 to EN 24 014, 2 washers, 1 O-ring (FPM90)
• F15: 2 screws M10x50 to EN 24 014, 2 washers, 1 flat gasket

for 3-spindle and 5-spindle valve manifold DN 5

• F34: 4 screws ⁷/₁₆-20 UNF x 2 inch to ASME B18.2.1, 2 O-rings (FPM 90)
• F36: 4 screws ⁷/₁₆-20 UNF x 2 inch to ASME B18.2.1, 2 flat gaskets
• F14: 4 screws M10x50 to EN 24 014, 4 washers, 2 O-rings (FPM90)
• F16: 4 screws M10x50 to EN 24 014, 4 washers, 2 flat-gaskets

Washers Ø 10.5 to DIN 125

Flat gaskets made of PTFE, max. permissible 420 bar (6092 psi), 80 °C (176 °F)

O-ring to DIN 3771, 20 x 2.65 – S – FPM90, max. permissible 420 bar (6092 psi), 120 °C (248 °F)

Note: Flange connection with M10 screws only permissible up to PN 160 (2321 psi)!

Mounting bracket for wall mounting or for securing to mounting rack

With bolts for mounting on valve manifold

• M14: For 2-spindle valve manifold DN 5
• M17: For 3-spindle valve manifold DN 5
• M18: For 5-spindle valve manifold DN 5

Mounting clips (2 off)

• M16: For securing the mounting brackets M14, M17 and M18 to pipe

Valve manifold 100 bar, suitable for oxygen

• S12: For 2-spindle valve manifold DN 5
• S13: For 3-spindle valve manifold DN 5
• S14: For 5-spindle valve manifold DN 5