Accessory set for 3-way and 5-way valve manifold DN 5 for flanging

• B31: 4 screws ⁷/₁₆-20 UNF x 2¹/₈ inch to ASME B18.2.1, 2 flat gaskets
• B34: 4 screws ⁷/₁₆-20 UNF x 2¹/₈ inch to ASME B18.2.1, 2 O-rings (FPM 90)
• B11: 4 screws M10x55 to DIN EN 24014, 4 washers, 2 flat gaskets
• B15 (suitable for oxygen): 4 screws M10x55 to DIN EN 24014, 4 washers, 2 flat gaskets
• B16: 4 screws M10x55 to DIN EN 24014, 4 washers, 2 O-rings (FPM 90)

Washers Ø 10.5 to DIN 125

Flat gaskets made of PTFE, max. permissible 420 bar (6092 psi), 80 °C (176 °F)

O-ring to DIN 3771, 20 x 2.65 – S – FPM90, max. permissible 420 bar (6092 psi), 120 °C (176 °F)

Note: M10 screws only permissible up to PN 160 (2320 psi)!

mounting plate

Made of electrogalvanized sheet-steel

• M11: For wall mounting or for securing on rack (72 mm grid)
  Scope of delivery:
  • 1 mounting plate 7MF9006-6EA with bolts for mounting on valve manifold
• M12: For pipe mounting
  Scope of delivery:
  • 1 mounting plate M11
  • 2 pipe brackets with nuts and washers for pipes with max. Ø 60.3 mm

Valve manifold 100 bar, suitable for oxygen

S12: Only in combination with versions for aggressive liquids and gases