SIPLUS ET 200S IM 151-7 CPU . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS ET 200S IM 151-7 CPU

| | | |

Article number		6AG1151-7AA21-2AB0
		SIPLUS ET200S IM151-7 CPU
General information
HW functional status		01
Firmware version		V3.3
Engineering with
в—Џ Programming package		V5.5 + SP1 or higher or V5.2 + SP1 or higher + HSP 219
Supply voltage
Rated value (DC)		24 V
permissible range, lower limit (DC)		19.2 V
permissible range, upper limit (DC)		28.8 V
Reverse polarity protection		Yes; against destruction
external protection for power supply lines (recommendation)		24 V DC/16 A miniature circuit breaker with type B and C tripping characteristics. Note: A 24 V DC/16 A miniature circuit breaker with type B tripping characteristics trips before and with type C tripping characteristic after the device protection fuse.
Mains buffering
в—Џ Mains/voltage failure stored energy time		5 ms
Input current
Inrush current, max.		1.8 A; Typical
IІt		0.09 AІ·s
from supply voltage 1L+, max.		320 mA; 410 mA with DP master module
Output current
for backplane bus (5 V DC), max.		700 mA
Power loss
Power loss, typ.		4.2 W
Memory
Work memory
в—Џ integrated		128 kbyte
в—Џ expandable		No
в—Џ Size of retentive memory for retentive data blocks		64 kbyte
Load memory
в—Џ Plug-in (MMC)		Yes
в—Џ Plug-in (MMC), max.		8 Mbyte
в—Џ Data management on MMC (after last programming), min.		10 y
Backup
в—Џ present		Yes; Ensured by SIMATIC Micro Memory Card (maintenance-free)
CPU processing times
for bit operations, typ.		0.06 µs
for word operations, typ.		0.12 µs
for fixed point arithmetic, typ.		0.16 µs
for floating point arithmetic, typ.		0.59 µs
CPU-blocks
Number of blocks (total)		1 024; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used.
DB
в—Џ Number, max.		1 024; Number range: 1 to 16000
в—Џ Size, max.		64 kbyte
FB
в—Џ Number, max.		1 024; Number range: 0 to 7999
в—Џ Size, max.		64 kbyte
FC
в—Џ Number, max.		1 024; Number range: 0 to 7999
в—Џ Size, max.		64 kbyte
OB
в—Џ Description		See S7-300 operation list
в—Џ Size, max.		64 kbyte
в—Џ Number of free cycle OBs		1; OB 1
в—Џ Number of time alarm OBs		1; OB 10
в—Џ Number of delay alarm OBs		2; OB 20, 21
в—Џ Number of cyclic interrupt OBs		4; OB 32, 33, 34, 35
в—Џ Number of process alarm OBs		1; OB 40
в—Џ Number of DPV1 alarm OBs		3; OB 55, 56, 57
в—Џ Number of startup OBs		1; OB 100
в—Џ Number of asynchronous error OBs		6; OB 80, 82, 83 (for centralized I/O only, not for distributed I/O), 85, 86, 87
в—Џ Number of synchronous error OBs		2; OB 121, 122
Nesting depth
в—Џ per priority class		16
в—Џ additional within an error OB		4
Counters, timers and their retentivity
S7 counter
в—Џ Number		256
Retentivity
вЂ” adjustable		Yes
вЂ” lower limit		0
вЂ” upper limit		255
вЂ” preset		Z 0 to Z 7
Counting range
вЂ” lower limit		0
вЂ” upper limit		999
IEC counter
в—Џ Number		Unlimited (limited only by RAM capacity)
S7 times
в—Џ Number		256
Retentivity
вЂ” adjustable		Yes
вЂ” lower limit		0
вЂ” upper limit		255
вЂ” preset		No retentivity
Time range
вЂ” lower limit		10 ms
вЂ” upper limit		9 990 s
IEC timer
в—Џ present		Yes
в—Џ Type		SFB
в—Џ Number		Unlimited (limited only by RAM capacity)
Data areas and their retentivity
Flag
в—Џ Number, max.		256 byte
в—Џ Retentivity available		Yes; MB 0 to MB 255
в—Џ Retentivity preset		MB 0 to MB 15
в—Џ Number of clock memories		8; 1 memory byte
Data blocks
в—Џ Retentivity adjustable		Yes; via non-retain property on DB
в—Џ Retentivity preset		Yes
Local data
в—Џ per priority class, max.		32 kbyte; Max. 2048 bytes per block
Address area
I/O address area
в—Џ Inputs		2 048 byte
в—Џ Outputs		2 048 byte
of which distributed
вЂ” Inputs		2 048 byte
вЂ” Outputs		2 048 byte
Process image
в—Џ Inputs		2 048 byte
в—Џ Outputs		2 048 byte
в—Џ Inputs, adjustable		2 048 byte
в—Џ Outputs, adjustable		2 048 byte
в—Џ Inputs, default		128 byte
в—Џ Outputs, default		128 byte
Digital channels
в—Џ Inputs		16 336
вЂ” of which central		496
в—Џ Outputs		16 336
вЂ” of which central		496
Analog channels
в—Џ Inputs		1 021
вЂ” of which central		124
в—Џ Outputs		1 021
вЂ” of which central		124
Hardware configuration
Number of modules per system, max.		63; Centralized
Mounting rail
в—Џ Number of mounting rails that can be used		1
в—Џ Length of mounting rail, max.		Station width: <= 1 m or < 2 m
Time of day
Clock
в—Џ Hardware clock (real-time)		Yes
в—Џ retentive and synchronizable		Yes
в—Џ Backup time		6 wk; At 40 °C ambient temperature, typically
в—Џ Deviation per day, max.		10 s; Typ.: 2 s
в—Џ Behavior of the clock following POWER-ON		Clock continues running after POWER OFF
в—Џ Behavior of the clock following expiry of backup period		Clock continues to run with the time at which the power failure occurred
Operating hours counter
в—Џ Number		1
в—Џ Number/Number range		0
в—Џ Range of values		0 to 2^31 hours (when using SFC 101)
в—Џ Granularity		1 hour
в—Џ retentive		Yes; Must be restarted at each restart
Clock synchronization
в—Џ supported		Yes
в—Џ to MPI, master		Yes
в—Џ to MPI, slave		Yes
в—Џ to DP, master		Yes; With DP slave only slave clock
в—Џ to DP, slave		Yes
в—Џ in AS, master		No
в—Џ in AS, slave		No
Interfaces
Interfaces/bus type		1 x MPI/PROFIBUS DP
Number of industrial Ethernet interfaces		0
Number of PROFINET interfaces		0
Number of wireless interfaces		0
1. Interface
Interface type		Integrated RS 485 interface
Physics		RS 485
Isolated		Yes
Power supply to interface (15 to 30 V DC), max.		80 mA
Functionality
в—Џ MPI		Yes
в—Џ PROFIBUS DP master		No
в—Џ PROFIBUS DP slave		Yes; active / passive
в—Џ Point-to-point connection		No
MPI
в—Џ Transmission rate, max.		12 Mbit/s
Services
вЂ” PG/OP communication		Yes
вЂ” Routing		Yes; With master module
вЂ” Global data communication		Yes
вЂ” S7 basic communication		Yes
вЂ” S7 communication		Yes; Only server, configured on one side
вЂ” S7 communication, as client		No
вЂ” S7 communication, as server		Yes
DP slave
в—Џ GSD file		The latest GSD file is available on the Internet (http://www.siemens.com/profibus-gsd)
в—Џ Transmission rate, max.		12 Mbit/s
в—Џ automatic baud rate search		Yes; only with passive interface
в—Џ Address area, max.		32
в—Џ User data per address area, max.		32 byte; Up to max. size of the transfer memory
Services
вЂ” PG/OP communication		Yes
вЂ” Routing		Yes; Only with active, integrated DP slave interface and inserted DP master module in DP master mode
вЂ” Global data communication		No
вЂ” S7 basic communication		No
вЂ” S7 communication		Yes; Only server, configured on one side
вЂ” S7 communication, as client		No
вЂ” S7 communication, as server		Yes
вЂ” Direct data exchange (slave-to-slave communication)		Yes
вЂ” DPV1		No
Transfer memory
вЂ” Inputs		244 byte
вЂ” Outputs		244 byte
2. Interface
Interface type		External interface via master module 6ES7138-4HA00-0AB0
Physics		RS 485
Isolated		Yes
Power supply to interface (15 to 30 V DC), max.		No
Functionality
в—Џ MPI		No
в—Џ PROFIBUS DP master		Yes
в—Џ PROFIBUS DP slave		No
DP master
в—Џ Transmission rate, max.		12 Mbit/s
в—Џ Number of DP slaves, max.		32; Per station
Services
вЂ” PG/OP communication		Yes
вЂ” Routing		Yes
вЂ” Global data communication		No
вЂ” S7 basic communication		Yes; I blocks only
вЂ” S7 communication		Yes; Only server, configured on one side
вЂ” S7 communication, as client		No
вЂ” S7 communication, as server		Yes
вЂ” Equidistance		Yes
вЂ” Isochronous mode		No
вЂ” SYNC/FREEZE		Yes
вЂ” Activation/deactivation of DP slaves		Yes
вЂ” Number of DP slaves that can be simultaneously activated/deactivated, max.		8
вЂ” Direct data exchange (slave-to-slave communication)		Yes
вЂ” DPV1		Yes
Address area
вЂ” Inputs, max.		2 kbyte
вЂ” Outputs, max.		2 kbyte
User data per DP slave
вЂ” Inputs, max.		244 byte
вЂ” Outputs, max.		244 byte
Isochronous mode
Isochronous operation (application synchronized up to terminal)		No
Communication functions
PG/OP communication		Yes
Data record routing		Yes; With DP master module
Global data communication
в—Џ supported		Yes
в—Џ Number of GD loops, max.		8
в—Џ Number of GD packets, max.		8
в—Џ Number of GD packets, transmitter, max.		8
в—Џ Number of GD packets, receiver, max.		8
в—Џ Size of GD packets, max.		22 byte
в—Џ Size of GD packet (of which consistent), max.		22 byte
S7 basic communication
в—Џ supported		Yes
в—Џ User data per job, max.		76 byte
в—Џ User data per job (of which consistent), max.		76 byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server)
S7 communication
в—Џ supported		Yes
в—Џ as server		Yes
в—Џ as client		No
в—Џ User data per job, max.		See online help of STEP 7 (shared parameters of the SFBs/FBs and of the SFCs/FCs of S7 Communication)
в—Џ User data per job (of which consistent), max.		See online help of STEP 7 (shared parameters of the SFBs/FBs and of the SFCs/FCs of S7 Communication)
Number of connections
в—Џ overall		12
в—Џ usable for PG communication		11
вЂ” reserved for PG communication		1
вЂ” adjustable for PG communication, min.		1
вЂ” adjustable for PG communication, max.		11
в—Џ usable for OP communication		11
вЂ” reserved for OP communication		1
вЂ” adjustable for OP communication, min.		1
вЂ” adjustable for OP communication, max.		11
в—Џ usable for S7 basic communication		10
вЂ” reserved for S7 basic communication		0
вЂ” adjustable for S7 basic communication, min.		0
вЂ” adjustable for S7 basic communication, max.		10
в—Џ usable for routing		4; As slave only with active interface, with IM 151-7 CPU as DP master
S7 message functions
Number of login stations for message functions, max.		12; Depending on the configured connections for PG/OP and S7 basic communication
Process diagnostic messages		Yes; ALARM_S, ALARM_SC, ALARM_SQ, ALARM_D, ALARM_DQ
simultaneously active Alarm-S blocks, max.		300
Test commissioning functions
Status block		Yes; Up to 2 simultaneously
Single step		Yes
Number of breakpoints		4
Status/control
в—Џ Status/control variable		Yes
в—Џ Variables		Inputs, outputs, memory bits, DB, times, counters
в—Џ Number of variables, max.		30
вЂ” of which status variables, max.		30
вЂ” of which control variables, max.		14
Forcing
в—Џ Forcing		Yes
в—Џ Forcing, variables		Inputs, outputs
в—Џ Number of variables, max.		10
Diagnostic buffer
в—Џ present		Yes
в—Џ Number of entries, max.		500
вЂ” adjustable		No
вЂ” of which powerfail-proof		100; Only the last 100 entries are retained
в—Џ Number of entries readable in RUN, max.		499
вЂ” can be set		Yes; From 10 to 499
вЂ” preset		10
Service data
в—Џ can be read out		Yes
Interrupts/diagnostics/status information
Alarms		Yes
Diagnostic functions		Yes
Diagnostics indication LED
в—Џ Group error SF (red)		Yes
в—Џ Monitoring 24 V voltage supply ON (green)		Yes
Potential separation
between PROFIBUS DP and all other circuit components		Yes
Permissible potential difference
between different circuits		75 V DC/60 V AC
Isolation
Isolation tested with		500 V DC
Degree and class of protection
IP degree of protection		IP20
Standards, approvals, certificates
CE mark		Yes
Ambient conditions
Ambient temperature during operation
в—Џ min.		-25 °C; = Tmin
в—Џ max.		60 °C; = Tmax
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3		Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Configuration
Configuration rules		max. 63 peripheral modules per station; station width < 1 m or < 2 m; max. 10 A per load group (power module); master interface module on right next to IM 151-7 CPU (X2 interface)
Configuration software
в—Џ STEP 7 Lite		No
Programming
в—Џ Command set		see instruction list
в—Џ Nesting levels		8
в—Џ System functions (SFC)		see instruction list
в—Џ System function blocks (SFB)		see instruction list
Programming language
вЂ” LAD		Yes
вЂ” FBD		Yes
вЂ” STL		Yes
вЂ” SCL		Yes; Optional
вЂ” CFC		Yes; Optional
вЂ” GRAPH		Yes; Optional
вЂ” HiGraph®		Yes; Optional
Know-how protection
в—Џ User program protection/password protection		Yes
в—Џ Block encryption		Yes; With S7 block Privacy
Cycle time monitoring
в—Џ lower limit		1 ms
в—Џ upper limit		6 000 ms
в—Џ adjustable		Yes
в—Џ preset		150 ms
Dimensions
Width		60 mm; DP master module: 35 mm
Height		119.5 mm
Depth		75 mm
Weights
Weight, approx.		200 g; DP master module: Approx. 100 g