SIPLUS S7-300 CPU 314C-2 PtP . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS S7-300 CPU 314C-2 PtP

| | | | | | |

Article number		6AG1314-6BH04-7AB0
		SIPLUS S7-300 CPU314C-2 PtP
General information
HW functional status		01
Firmware version		V3.3
Engineering with
в—Џ Programming package		STEP 7 as of V5.5 + SP1 or STEP 7 V5.3 + SP2 or higher with HSP 204
Supply voltage
Rated value (DC)
в—Џ 24 V DC		Yes
permissible range, lower limit (DC)		19.2 V
permissible range, upper limit (DC)		28.8 V
external protection for power supply lines (recommendation)		Miniature circuit breaker, type C; min. 2 A; miniature circuit breaker type B, min. 4 A
Mains buffering
в—Џ Mains/voltage failure stored energy time		5 ms
в—Џ Repeat rate, min.		1 s
Load voltage L+
Digital inputs
вЂ” Rated value (DC)		24 V
вЂ” Reverse polarity protection		Yes
Digital outputs
вЂ” Rated value (DC)		24 V
вЂ” Reverse polarity protection		No
Input current
Current consumption (rated value)		660 mA
Current consumption (in no-load operation), typ.		150 mA
Inrush current, typ.		5 A
IІt		0.7 AІ·s
Digital inputs
в—Џ from load voltage L+ (without load), max.		80 mA
Digital outputs
в—Џ from load voltage L+, max.		50 mA
Power loss
Power loss, typ.		13 W
Memory
Work memory
в—Џ integrated		192 kbyte
в—Џ expandable		No
в—Џ Size of retentive memory for retentive data blocks		64 kbyte
Load memory
в—Џ Plug-in (MMC)		Yes
в—Џ Plug-in (MMC), max.		8 Mbyte
в—Џ Data management on MMC (after last programming), min.		10 y
Backup
в—Џ present		Yes; Guaranteed by MMC (maintenance-free)
в—Џ without battery		Yes; Program and data
CPU processing times
for bit operations, typ.		0.06 µs
for word operations, typ.		0.12 µs
for fixed point arithmetic, typ.		0.16 µs
for floating point arithmetic, typ.		0.59 µs
CPU-blocks
Number of blocks (total)		1 024; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used.
DB
в—Џ Number, max.		1 024; Number range: 1 to 16000
в—Џ Size, max.		64 kbyte
FB
в—Џ Number, max.		1 024; Number range: 0 to 7999
в—Џ Size, max.		64 kbyte
FC
в—Џ Number, max.		1 024; Number range: 0 to 7999
в—Џ Size, max.		64 kbyte
OB
в—Џ Description		see instruction list
в—Џ Size, max.		64 kbyte
в—Џ Number of free cycle OBs		1; OB 1
в—Џ Number of time alarm OBs		1; OB 10
в—Џ Number of delay alarm OBs		2; OB 20, 21
в—Џ Number of cyclic interrupt OBs		4; OB 32, 33, 34, 35
в—Џ Number of process alarm OBs		1; OB 40
в—Џ Number of startup OBs		1; OB 100
в—Џ Number of asynchronous error OBs		4; OB 80, 82, 85, 87
в—Џ Number of synchronous error OBs		2; OB 121, 122
Nesting depth
в—Џ per priority class		16
в—Џ additional within an error OB		4
Counters, timers and their retentivity
S7 counter
в—Џ Number		256
Retentivity
вЂ” adjustable		Yes
вЂ” lower limit		0
вЂ” upper limit		255
вЂ” preset		Z 0 to Z 7
Counting range
вЂ” lower limit		0
вЂ” upper limit		999
IEC counter
в—Џ Number		Unlimited (limited only by RAM capacity)
S7 times
в—Џ Number		256
Retentivity
вЂ” adjustable		Yes
вЂ” lower limit		0
вЂ” upper limit		255
вЂ” preset		No retentivity
Time range
вЂ” lower limit		10 ms
вЂ” upper limit		9 990 s
IEC timer
в—Џ present		Yes
в—Џ Type		SFB
в—Џ Number		Unlimited (limited only by RAM capacity)
Data areas and their retentivity
retentive data area in total		All, max. 64 KB
Flag
в—Џ Number, max.		256 byte
в—Џ Retentivity available		Yes; MB 0 to MB 255
в—Џ Retentivity preset		MB 0 to MB 15
в—Џ Number of clock memories		8; 1 memory byte
Data blocks
в—Џ Retentivity adjustable		Yes; via non-retain property on DB
в—Џ Retentivity preset		Yes
Local data
в—Џ per priority class, max.		32 kbyte; Max. 2048 bytes per block
Address area
I/O address area
в—Џ Inputs		1 024 byte
в—Џ Outputs		1 024 byte
of which distributed
вЂ” Inputs		none
вЂ” Outputs		none
Process image
в—Џ Inputs		1 024 byte
в—Џ Outputs		1 024 byte
в—Џ Inputs, adjustable		1 024 byte
в—Џ Outputs, adjustable		1 024 byte
в—Џ Inputs, default		128 byte
в—Џ Outputs, default		128 byte
Default addresses of the integrated channels
вЂ” Digital inputs		124.0 to 126.7
вЂ” Digital outputs		124.0 to 125.7
вЂ” Analog inputs		752 to 761
вЂ” Analog outputs		752 to 755
Digital channels
в—Џ Inputs		1 016
вЂ” of which central		1 016
в—Џ Outputs		1 008
вЂ” of which central		1 008
Analog channels
в—Џ Inputs		253
вЂ” of which central		253
в—Џ Outputs		250
вЂ” of which central		250
Hardware configuration
Number of expansion units, max.		3
Number of DP masters
в—Џ integrated		none
в—Џ via CP		4
Number of operable FMs and CPs (recommended)
в—Џ FM		8
в—Џ CP, PtP		8
в—Џ CP, LAN		10
Rack
в—Џ Racks, max.		4
в—Џ Modules per rack, max.		8; In rack 3 max. 7
Time of day
Clock
в—Џ Hardware clock (real-time)		Yes
в—Џ retentive and synchronizable		Yes
в—Џ Backup time		6 wk; At 40 °C ambient temperature
в—Џ Deviation per day, max.		10 s; Typ.: 2 s
в—Џ Behavior of the clock following POWER-ON		Clock continues running after POWER OFF
в—Џ Behavior of the clock following expiry of backup period		Clock continues to run with the time at which the power failure occurred
Operating hours counter
в—Џ Number		1
в—Џ Number/Number range		0
в—Џ Range of values		0 to 2^31 hours (when using SFC 101)
в—Џ Granularity		1 hour
в—Џ retentive		Yes; Must be restarted at each restart
Clock synchronization
в—Џ supported		Yes
в—Џ to MPI, master		Yes
в—Џ to MPI, slave		Yes
в—Џ in AS, master		Yes
в—Џ in AS, slave		No
Digital inputs
Number of digital inputs		24
в—Џ of which inputs usable for technological functions		16
integrated channels (DI)		24
Input characteristic curve in accordance with IEC 61131, type 1		Yes
horizontal installation
вЂ” up to 40 °C, max.		24
вЂ” up to 60 °C, max.		12; up to 70 °C
vertical installation
вЂ” up to 40 °C, max.		12
Input voltage
в—Џ Rated value (DC)		24 V
в—Џ for signal "0"		-3 to +5V
в—Џ for signal "1"		+15 to +30V
Input current
в—Џ for signal "1", typ.		8 mA
Input delay (for rated value of input voltage)
for standard inputs
вЂ” parameterizable		Yes; 0.1 / 0.3 / 3 / 15 ms (You can reconfigure the input delay of the standard inputs during program runtime. Please note that under certain circumstances your newly set filter time may not be effective until the next filter cycle.)
вЂ” Rated value		3 ms
for counter/technological functions
вЂ” at "0" to "1", max.		8 µs; Minimum pulse width/minimum pause between pulses at maximum counting frequency
Cable length
в—Џ shielded, max.		1 000 m; 50 m for technological functions
в—Џ unshielded, max.		600 m; For technological functions: No
for technological functions
вЂ” shielded, max.		50 m; at maximum count frequency
вЂ” unshielded, max.		not allowed
Digital outputs
Number of digital outputs		16
в—Џ of which high-speed outputs		4; Notice: You cannot connect the fast outputs of your CPU in parallel
integrated channels (DO)		16
Short-circuit protection		Yes; Clocked electronically
в—Џ Response threshold, typ.		1 A
Limitation of inductive shutdown voltage to		L+ (-48 V)
Controlling a digital input		Yes
Switching capacity of the outputs
в—Џ on lamp load, max.		5 W
Load resistance range
в—Џ lower limit		48 в„¦
в—Џ upper limit		4 kв„¦
Output voltage
в—Џ for signal "1", min.		L+ (-0.8 V)
Output current
в—Џ for signal "1" rated value		500 mA
в—Џ for signal "1" permissible range, min.		5 mA
в—Џ for signal "1" permissible range, max.		0.6 A
в—Џ for signal "1" minimum load current		5 mA
в—Џ for signal "0" residual current, max.		0.5 mA
Parallel switching of two outputs
в—Џ for uprating		No
в—Џ for redundant control of a load		Yes
Switching frequency
в—Џ with resistive load, max.		100 Hz
в—Џ with inductive load, max.		0.5 Hz
в—Џ on lamp load, max.		100 Hz
в—Џ of the pulse outputs, with resistive load, max.		2.5 kHz
horizontal installation
вЂ” up to 40 °C, max.		3 A
вЂ” up to 60 °C, max.		2 A; 1.5 A @ > 60 °C
vertical installation
вЂ” up to 40 °C, max.		2 A
Cable length
в—Џ shielded, max.		1 000 m
в—Џ unshielded, max.		600 m
Analog inputs
Number of analog inputs		5
в—Џ For voltage/current measurement		4
в—Џ For resistance/resistance thermometer measurement		1
integrated channels (AI)		5; 4 x current/voltage, 1 x resistance
permissible input voltage for current input (destruction limit), max.		5 V; Permanent
permissible input voltage for voltage input (destruction limit), max.		30 V; Permanent
permissible input current for voltage input (destruction limit), max.		0.5 mA; Permanent
permissible input current for current input (destruction limit), max.		50 mA; Permanent
No-load voltage, typ.		3.3 V
Constant measurement current for resistance-type transmitter, typ.		1.25 mA
Technical unit for temperature measurement adjustable		Yes; Degrees Celsius / degrees Fahrenheit / Kelvin
Input ranges
в—Џ Voltage		Yes; ±10 V / 100 kО©; 0 V to 10 V / 100 kО©
в—Џ Current		Yes; ±20 mA / 100 О©; 0 mA to 20 mA / 100 О©; 4 mA to 20 mA / 100 О©
в—Џ Resistance thermometer		Yes; Pt 100 / 10 MО©
в—Џ Resistance		Yes; 0 О© to 600 О© / 10 MО©
Input ranges (rated values), voltages
в—Џ 0 to +10 V		Yes
в—Џ Input resistance (0 to 10 V)		100 kв„¦
Input ranges (rated values), currents
в—Џ 0 to 20 mA		Yes
в—Џ Input resistance (0 to 20 mA)		100 в„¦
в—Џ -20 mA to +20 mA		Yes
в—Џ Input resistance (-20 mA to +20 mA)		100 в„¦
в—Џ 4 mA to 20 mA		Yes
в—Џ Input resistance (4 mA to 20 mA)		100 в„¦
Input ranges (rated values), resistance thermometer
в—Џ Pt 100		Yes
в—Џ Input resistance (Pt 100)		10 Mв„¦
Input ranges (rated values), resistors
в—Џ 0 to 600 ohms		Yes
в—Џ Input resistance (0 to 600 ohms)		10 Mв„¦
Thermocouple (TC)
Temperature compensation
вЂ” parameterizable		No
Characteristic linearization
в—Џ parameterizable		Yes; by software
вЂ” for resistance thermometer		Pt 100
Cable length
в—Џ shielded, max.		100 m
Analog outputs
Number of analog outputs		2
integrated channels (AO)		2
Voltage output, short-circuit protection		Yes
Voltage output, short-circuit current, max.		55 mA
Current output, no-load voltage, max.		14 V
Output ranges, voltage
в—Џ 0 to 10 V		Yes
в—Џ -10 V to +10 V		Yes
Output ranges, current
в—Џ 0 to 20 mA		Yes
в—Џ -20 mA to +20 mA		Yes
в—Џ 4 mA to 20 mA		Yes
Connection of actuators
в—Џ for voltage output two-wire connection		Yes; Without compensation of the line resistances
в—Џ for voltage output four-wire connection		No
в—Џ for current output two-wire connection		Yes
Load impedance (in rated range of output)
в—Џ with voltage outputs, min.		1 kв„¦
в—Џ with voltage outputs, capacitive load, max.		0.1 µF
в—Џ with current outputs, max.		300 в„¦
в—Џ with current outputs, inductive load, max.		0.1 mH
Destruction limits against externally applied voltages and currents
в—Џ Voltages at the outputs towards MANA		16 V; Permanent
в—Џ Current, max.		50 mA; Permanent
Cable length
в—Џ shielded, max.		200 m
Analog value generation for the inputs
Measurement principle		Actual value encryption (successive approximation)
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.		12 bit
в—Џ Integration time, parameterizable		Yes; 16.6 / 20 ms
в—Џ Interference voltage suppression for interference frequency f1 in Hz		50 / 60 Hz
в—Џ permissible input frequency, max.		400 Hz
в—Џ Time constant of the input filter		0.38 ms
в—Џ Basic execution time of the module (all channels released)		1 ms
Analog value generation for the outputs
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.		12 bit
в—Џ Conversion time (per channel)		1 ms
Settling time
в—Џ for resistive load		0.6 ms
в—Џ for capacitive load		1 ms
в—Џ for inductive load		0.5 ms
Encoder
Connection of signal encoders
в—Џ for voltage measurement		Yes
в—Џ for current measurement as 2-wire transducer		Yes; with external supply
в—Џ for current measurement as 4-wire transducer		Yes
в—Џ for resistance measurement with two-wire connection		Yes; Without compensation of the line resistances
в—Џ for resistance measurement with three-wire connection		No
в—Џ for resistance measurement with four-wire connection		No
Connectable encoders
в—Џ 2-wire sensor		Yes
вЂ” permissible quiescent current (2-wire sensor), max.		1.5 mA
Errors/accuracies
Temperature error (relative to input range), (+/-)		0.006 %/K
Crosstalk between the inputs, min.		60 dB
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-)		0.06 %
Output ripple (relative to output range, bandwidth 0 to 50 kHz), (+/-)		0.1 %
Linearity error (relative to output range), (+/-)		0.15 %
Temperature error (relative to output range), (+/-)		0.01 %/K
Crosstalk between the outputs, min.		60 dB
Repeat accuracy in steady state at 25 °C (relative to output range), (+/-)		0.06 %
Operational error limit in overall temperature range
в—Џ Voltage, relative to input range, (+/-)		1 %
в—Џ Current, relative to input range, (+/-)		1 %
в—Џ Resistance, relative to input range, (+/-)		1 %
в—Џ Voltage, relative to output range, (+/-)		1 %
в—Џ Current, relative to output range, (+/-)		1 %
Basic error limit (operational limit at 25 °C)
в—Џ Voltage, relative to input range, (+/-)		0.8 %; Linearity error ±0.06 %
в—Џ Current, relative to input range, (+/-)		0.8 %; Linearity error ±0.06 %
в—Џ Resistance, relative to input range, (+/-)		0.8 %; Linearity error ±0.2 %
в—Џ Resistance thermometer, relative to input range, (+/-)		0.8 %
в—Џ Voltage, relative to output range, (+/-)		0.8 %
в—Џ Current, relative to output range, (+/-)		0.8 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
в—Џ Series mode interference (peak value of interference < rated value of input range), min.		30 dB
в—Џ Common mode interference, min.		40 dB
Interfaces
Number of industrial Ethernet interfaces		0
Number of PROFINET interfaces		0
Number of RS 485 interfaces		1; MPI
Number of RS 422 interfaces		1; RS 422/485 combined
Point-to-point
в—Џ Cable length, max.		1 200 m
Integrated protocol driver
вЂ” 3964 (R)		Yes
вЂ” ASCII		Yes
вЂ” RK512		Yes
Transmission rate, RS 422/485
вЂ” with 3964 (R) protocol, max.		19.2 kbit/s; 38.4 kbit/s half duplex; 19.2 kbit/s full duplex
вЂ” with ASCII protocol, max.		19.2 kbit/s; 38.4 kbit/s half duplex; 19.2 kbit/s full duplex
вЂ” with RK 512 protocol, max.		19.2 kbit/s; 38.4 kbit/s half duplex; 19.2 kbit/s full duplex
1. Interface
Interface type		Integrated RS 485 interface
Physics		RS 485
Isolated		No
Power supply to interface (15 to 30 V DC), max.		200 mA
Functionality
в—Џ MPI		Yes
в—Џ PROFIBUS DP master		No
в—Џ PROFIBUS DP slave		No
в—Џ Point-to-point connection		No
MPI
в—Џ Transmission rate, max.		187.5 kbit/s
Services
вЂ” PG/OP communication		Yes
вЂ” Routing		No
вЂ” Global data communication		Yes
вЂ” S7 basic communication		Yes
вЂ” S7 communication		Yes; Only server, configured on one side
вЂ” S7 communication, as client		No; but via CP and loadable FB
вЂ” S7 communication, as server		Yes
2. Interface
Interface type		Integrated RS 422/ 485 interface
Physics		RS 422/RS 485 (X.27)
Isolated		Yes
Power supply to interface (15 to 30 V DC), max.		No
Functionality
в—Џ MPI		No
в—Џ PROFINET IO Controller		No
в—Џ PROFINET IO Device		No
в—Џ PROFINET CBA		No
в—Џ PROFIBUS DP master		No
в—Џ PROFIBUS DP slave		No
в—Џ Point-to-point connection		Yes
Point-to-point connection
в—Џ Transmission rate, max.		19.2 kbit/s; 38.4 kbit/s half duplex; 19.2 kbit/s full duplex
в—Џ Interface controllable from the user program		Yes
в—Џ Interface can trigger alarm/interrupt in the user program		Yes; Message on break - identification
Communication functions
PG/OP communication		Yes
Data record routing		No
Global data communication
в—Џ supported		Yes
в—Џ Number of GD loops, max.		8
в—Џ Number of GD packets, max.		8
в—Џ Number of GD packets, transmitter, max.		8
в—Џ Number of GD packets, receiver, max.		8
в—Џ Size of GD packets, max.		22 byte
в—Џ Size of GD packet (of which consistent), max.		22 byte
S7 basic communication
в—Џ supported		Yes
в—Џ User data per job, max.		76 byte
в—Џ User data per job (of which consistent), max.		76 byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server)
S7 communication
в—Џ supported		Yes
в—Џ as server		Yes
в—Џ as client		Yes; Via CP and loadable FB
в—Џ User data per job, max.		180 kbyte; With PUT/GET
в—Џ User data per job (of which consistent), max.		240 byte; as server
S5 compatible communication
в—Џ supported		Yes; via CP and loadable FC
Number of connections
в—Џ overall		12
в—Џ usable for PG communication		11
вЂ” reserved for PG communication		1
вЂ” adjustable for PG communication, min.		1
вЂ” adjustable for PG communication, max.		11
в—Џ usable for OP communication		11
вЂ” reserved for OP communication		1
вЂ” adjustable for OP communication, min.		1
вЂ” adjustable for OP communication, max.		11
в—Џ usable for S7 basic communication		8
вЂ” reserved for S7 basic communication		0
вЂ” adjustable for S7 basic communication, min.		0
вЂ” adjustable for S7 basic communication, max.		8
S7 message functions
Number of login stations for message functions, max.		12; Depending on the configured connections for PG/OP and S7 basic communication
Process diagnostic messages		Yes
simultaneously active Alarm-S blocks, max.		300
Test commissioning functions
Status block		Yes; Up to 2 simultaneously
Single step		Yes
Number of breakpoints		4
Status/control
в—Џ Status/control variable		Yes
в—Џ Variables		Inputs, outputs, memory bits, DB, times, counters
в—Џ Number of variables, max.		30
вЂ” of which status variables, max.		30
вЂ” of which control variables, max.		14
Forcing
в—Џ Forcing		Yes
в—Џ Forcing, variables		Inputs, outputs
в—Џ Number of variables, max.		10
Diagnostic buffer
в—Џ present		Yes
в—Џ Number of entries, max.		500
вЂ” adjustable		No
вЂ” of which powerfail-proof		100; Only the last 100 entries are retained
в—Џ Number of entries readable in RUN, max.		499
вЂ” can be set		Yes; From 10 to 499
вЂ” preset		10
Service data
в—Џ can be read out		Yes
Interrupts/diagnostics/status information
Diagnostics indication LED
в—Џ Status indicator digital input (green)		Yes
в—Џ Status indicator digital output (green)		Yes
Integrated Functions
Number of counters		4; See "Technological Functions" manual
Counting frequency (counter) max.		60 kHz
Frequency measurement		Yes
Number of frequency meters		4; up to 60 kHz (see "Technological Functions" manual)
controlled positioning		Yes
integrated function blocks (closed-loop control)		Yes; PID controller (see "Technological Functions" manual)
PID controller		Yes
Number of pulse outputs		4; Pulse width modulation up to 2.5 kHz (see "Technological Functions" Manual)
Limit frequency (pulse)		2.5 kHz
Potential separation
Potential separation digital inputs
в—Џ Potential separation digital inputs		Yes
в—Џ between the channels		No
в—Џ between the channels and backplane bus		Yes
Potential separation digital outputs
в—Џ Potential separation digital outputs		Yes
в—Џ between the channels		Yes
в—Џ between the channels, in groups of		8
в—Џ between the channels and backplane bus		Yes
Potential separation analog inputs
в—Џ Potential separation analog inputs		Yes; common for analog I/O
в—Џ between the channels		No
в—Џ between the channels and backplane bus		Yes
Potential separation analog outputs
в—Џ Potential separation analog outputs		Yes; common for analog I/O
в—Џ between the channels		No
в—Џ between the channels and backplane bus		Yes
Permissible potential difference
between different circuits		75 V DC/60 V AC
Between the inputs and MANA (UCM)		8 V DC
between MANA and M internally (UISO)		75 V DC/60 V AC
Isolation
Isolation tested with		600 V DC
Standards, approvals, certificates
CE mark		Yes
cULus		Yes; File E239877
FM approval		No
RCM (formerly C-TICK)		Yes
KC approval		Yes
EAC (formerly Gost-R)		Yes
Use in hazardous areas
в—Џ ATEX		Yes
Ambient conditions
Ambient temperature during operation
в—Џ min.		-25 °C; = Tmin
в—Џ max.		70 °C; = Tmax; 60 °C @ UL/cUL, ATEX and FM use
Ambient temperature during storage/transportation
в—Џ min.		-40 °C
в—Џ max.		70 °C
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3		Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Configuration
Configuration software
в—Џ STEP 7		Yes; STEP 7 V5.5 + SP1 or higher or STEP 7 V5.3 + SP2 or higher with HSP 203
в—Џ STEP 7 Lite		No
Programming
в—Џ Command set		see instruction list
в—Џ Nesting levels		8
в—Џ System functions (SFC)		see instruction list
в—Џ System function blocks (SFB)		see instruction list
Programming language
вЂ” LAD		Yes
вЂ” FBD		Yes
вЂ” STL		Yes
вЂ” SCL		Yes
вЂ” CFC		Yes
вЂ” GRAPH		Yes
вЂ” HiGraph®		Yes
Know-how protection
в—Џ User program protection/password protection		Yes
в—Џ Block encryption		Yes; With S7 block Privacy
Dimensions
Width		120 mm
Height		125 mm
Depth		130 mm
Weights
Weight, approx.		680 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания