SITRANS WW200 . Технические данные. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SITRANS WW200

| | | | | | | |

Mode of operation
Measuring principle	Strain gauge load cells and digital speed sensor
Typical application	Control and monitor feed rates and blending of minerals or powdered additives into a process
Measuring accuracy
Accuracy¹⁾	± 0.5 % or better
Repeatability	± 0.1 %
Specified range	10 вЂ¦ 100 % based on speed
Design rate range	0.45 вЂ¦ 100 t/h (1 000 lb/h вЂ¦ 110 STPH)
Max volumetric flow	120 m³/h (4 237 ft³/h)
Medium conditions
Operating temperature	-10 вЂ¦ +55 °C ( 14 вЂ¦ 131 °F)
Material	Mild steel or stainless steel [304 (1.4301) or 316 (1.4401)], bead blast finish (1 ... 6 Ојm, 40 ... 240 Ојin)
Load cells
Construction	17-4 PH (1.4568) stainless steel or nickel plated alloy steel
Degree of protection	Stainless steel: IP68 Nickel plated alloy steel: IP66
Excitation	10 V DC nominal, 15 V DC maximum
Output	2 mV/V
Non-linearity	± 0.02 % of rated output
Non-repeatability	± 0.01 % of rated output
Capacity	Stainless steel range: 6, 12, 30 kg Nickel-plated range: 10, 15, 20, 30, 50 kg
Overload	150 % of rated capacity
Temperature	Operating range: -40 вЂ¦ +65 °C (-40 вЂ¦ +150 °F) Compensated: -10 вЂ¦ +40 °C (15 вЂ¦ 105 °F)
Speed sensor
Optical encoder output	RS 422 (TTL) 5 V DC, 150 mA max. 1 000 or 2 000 ppr
Temperature	-10 вЂ¦ +70 °C (14 вЂ¦ 158 °F)
Degree of protection	Standard: IP64 Stainless steel: IP67
Belt tracking switch
Aluminum spring rod (un-wired)	1 NO, 1 NC switch blocks Rated operating voltage 600 V AC max.
Temperature	-30 ... +85 °C (-22 ... +185 °F)
Degree of protection	IP67
Framework	Precision machined, stainless [304 (1.4301) or 316 (1.4401)] or mild steel Cantilevered design for easy belt replacement
Pulleys	152 mm (6 inch) diameter with 6 mm (ј inch) neoprene lagging
Belt speed	0.005 вЂ¦ 0.36 m/s (1 вЂ¦ 70 fpm)
Belt support	Edge of flat bar eliminates material buildup
Bearings	2-bolt flange mount on drive pulley 2-bolt threaded base pillow block on driven pulley
Belting	Polyester carcass with polyurethane top cover and static control with vulcanized endless finger splice for maximum weighing consistency (standard); optionally available in blue Maximum rated material temperature 82 °C (180 °F) Silicone HT belt rated for max. material temp. of 177 °C (350 °F)
Belt tension	Screw type, telescoper module with 150 mm (6 inch) travel - mild or stainless steel 304 (1.4301)
Belt cleaning	PE-HD blade type with spring tensioning at head pulley Return plow Cleaning brush, optional
Drive motor	AC gearmotor: helical-worm geared motor, IE1, IP55, C2 coating. Optional food grade style: helical-worm geared motor, IE3, IP66, sealed surface treatment, meets FDA requirements.
Shipping weight	280 kg (600 lb) minimum
Approvals	Declaration of incorporation of partly completed machinery acc. directive 2006/42/EC. Stainless steel options meet FDA requirements for food processing. Belt properties in compliance with food safety regulation (EU) 10/2011 and (EC) 1935/2004. Meets FDA 21CFR and Halal HACCP concept supported: resistant to hot water and ideal for frequent cleaning cycles. Hazardous approvals per configuration options. Note: weighfeeder as a whole is not approved for hazardous locations only electrical components.

¹⁾ Accuracy subject to: On factory approved installations the weigh feeder systemвЂ™s totalized weight will be within the specified accuracy when compared to a known weighed material test sample. The test rate must be within the specified range of the design capacity and held constant for the duration of the test. The minimum material test sample must be equivalent to a sample obtained at the test flow rate for three revolutions of the belt or at least ten minutes running time, whichever is greater.