Transfer rate

Number of electrical connections

• в—Џ at the 1st interface acc. to Industrial Ethernet

Type of electrical connection

• в—Џ at the 1st interface acc. to Industrial Ethernet

Type of voltage of the supply voltage

Supply voltage

• в—Џ 1 from backplane bus

• в—Џ 2 from backplane bus

Relative symmetrical tolerance at DC

• в—Џ at 5 V

• в—Џ at 12 V

Consumed current

• в—Џ 1 from backplane bus at DC maximum

• в—Џ 2 from backplane bus at DC maximum

Power loss [W]

Ambient temperature

• в—Џ during operation

• в—Џ during storage

• в—Џ during transport

Relative humidity at 25 °C without condensation during operation maximum

Protection class IP

Module format

Width

Height

Depth

Net weight

Number of plug-in cards of same design plug-in per PC station

Number of units Note

Software for open communication by means of SEND/RECEIVE required

Number of possible connections for open communication by means of SEND/RECEIVE maximum

Software for S7 communication required

Number of possible connections for S7/PG communication maximum

Number of active connections with multi-protocol mode

Number of configurable connections per PC station

Software for PROFINET IO communication required

Number of PN IO devices on PROFINET IO controller usable total

Number of PN IO IRT devices on PROFINET IO controller usable

Amount of data

• в—Џ as user data for input variables as PROFINET IO controller maximum

• в—Џ as user data for input variables as PROFINET IO controller maximum

• в—Џ as user data for input variables per PN IO device as PROFINET IO controller maximum

• в—Џ as user data for output variables per PN IO device as PROFINET IO controller maximum

Software for PROFINET CBA communication required

Number of remote connection partners with PROFINET CBA

Number of connections with PROFINET CBA total

Product function MIB support

Protocol is supported

• в—Џ SNMP v1

• в—Џ SNMP v3

• в—Џ DCP

• в—Џ LLDP

Configuration software required

Configuration software for PROFINET CBA required

Identification & maintenance function

• в—Џ I&M0 - device-specific information

• в—Џ I&M1 – higher-level designation/location designation

• в—Џ I&M2 - installation date

• в—Џ I&M3 - comment

• в—Џ I&M4 - signature

• в—Џ I&M4 - OEM data

Standard

• в—Џ for EMC

• в—Џ for safety from CSA and UL

• в—Џ for emitted interference

• в—Џ for interference immunity

Certificate of suitability

• в—Џ CE marking

• в—Џ C-Tick