IM 154-8 PN/DP CPU . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на IM 154-8 PN/DP CPU

| | | | | | |

Article number		6ES7154-8AB01-0AB0
		ET200PRO: IM 154-8 PN/DP CPU, 384KB
General information
HW functional status		01
Firmware version		V3.2
Engineering with
в—Џ Programming package		STEP 7 V5.5 or higher
Supply voltage
Rated value (DC)		24 V
permissible range, lower limit (DC)		20.4 V
permissible range, upper limit (DC)		28.8 V
external protection for power supply lines (recommendation)		MCB 24 V DC / 16 A with tripping characteristic Type B and C (see ET 200pro manual)
Load voltage L+
в—Џ Rated value (DC)		24 V
в—Џ permissible range, lower limit (DC)		20.4 V
в—Џ permissible range, upper limit (DC)		28.8 V
в—Џ Reverse polarity protection		Yes
Input current
Current consumption, typ.		350 mA
Current consumption (in no-load operation), typ.		250 mA; Typical, current consumption for CPU in STOP state
Inrush current, typ.		2 A
IІt		0.25 AІ·s; Typical
Power loss
Power loss, typ.		8.5 W
Memory
Work memory
в—Џ integrated		384 kbyte
в—Џ expandable		No
Load memory
в—Џ Plug-in (MMC)		Yes
в—Џ Plug-in (MMC), max.		8 Mbyte
в—Џ Data management on MMC (after last programming), min.		10 y
Backup
в—Џ present		Yes; Guaranteed by MMC (maintenance-free)
в—Џ without battery		Yes; Program and data
CPU processing times
for bit operations, typ.		0.05 µs
for word operations, typ.		0.09 µs
for fixed point arithmetic, typ.		0.12 µs
for floating point arithmetic, typ.		0.45 µs
CPU-blocks
Number of blocks (total)		1 024; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used.
DB
в—Џ Number, max.		1 024; Number range: 1 to 16000
в—Џ Size, max.		64 kbyte
FB
в—Џ Number, max.		1 024; Number range: 0 to 7999
в—Џ Size, max.		64 kbyte
FC
в—Џ Number, max.		1 024; Number range: 0 to 7999
в—Џ Size, max.		64 kbyte
OB
в—Џ Size, max.		64 kbyte
в—Џ Number of free cycle OBs		1; OB 1
в—Џ Number of time alarm OBs		1; OB 10
в—Џ Number of delay alarm OBs		2; OB 20, 21
в—Џ Number of cyclic interrupt OBs		4; OB 32, 33, 34, 35
в—Џ Number of process alarm OBs		1; OB 40
в—Џ Number of DPV1 alarm OBs		3; OB 55, 56, 57
в—Џ Number of isochronous mode OBs		1; OB 61
в—Џ Number of startup OBs		1; OB 100
в—Џ Number of asynchronous error OBs		6; OB 80, 82, 83, 85, 86, 87 (OB83 only for centralized I/O and PROFINET IO)
в—Џ Number of synchronous error OBs		2; OB 121, 122
Nesting depth
в—Џ per priority class		16
в—Џ additional within an error OB		4
Counters, timers and their retentivity
S7 counter
в—Џ Number		256
Retentivity
вЂ” adjustable		Yes
вЂ” lower limit		0
вЂ” upper limit		255
вЂ” preset		Z 0 to Z 7
Counting range
вЂ” can be set		Yes
вЂ” lower limit		0
вЂ” upper limit		999
IEC counter
в—Џ Number		Unlimited (limited only by RAM capacity)
S7 times
в—Џ Number		256
Retentivity
вЂ” adjustable		Yes
вЂ” lower limit		0
вЂ” upper limit		255
вЂ” preset		No retentivity
Time range
вЂ” lower limit		10 ms
вЂ” upper limit		9 990 s
IEC timer
в—Џ present		Yes
в—Џ Type		SFB
в—Џ Number		Unlimited (limited only by RAM capacity)
Data areas and their retentivity
retentive data area in total		All, 128 KB max.
Flag
в—Џ Number, max.		2 048 byte
в—Џ Retentivity available		Yes; MB 0 to MB 2047
в—Џ Retentivity preset		MB 0 to MB 15
в—Џ Number of clock memories		8
Data blocks
в—Џ Retentivity adjustable		Yes; via non-retain property on DB
в—Џ Retentivity preset		Yes
Local data
в—Џ per priority class, max.		32 768 byte; Max. 2048 bytes per block
Address area
I/O address area
в—Џ Inputs		2 048 byte
в—Џ Outputs		2 048 byte
of which distributed
вЂ” Inputs		2 048 byte
вЂ” Outputs		2 048 byte
Process image
в—Џ Inputs, adjustable		2 048 byte
в—Џ Outputs, adjustable		2 048 byte
в—Џ Inputs, default		128 byte
в—Џ Outputs, default		128 byte
Subprocess images
в—Џ Number of subprocess images, max.		1; With PROFINET IO, the length of the user data is limited to 1600 bytes
Digital channels
в—Џ Inputs		16 384
вЂ” of which central		128
в—Џ Outputs		16 384
вЂ” of which central		64
Analog channels
в—Џ Inputs		1 024
вЂ” of which central		64
в—Џ Outputs		1 024
вЂ” of which central		64
Hardware configuration
Integrated power supply		Yes; 24 V DC
Number of DP masters
в—Џ integrated		1
Rack
в—Џ Racks, max.		1
в—Џ Modules per rack, max.		16; Expansion width max. 1 m
Time of day
Clock
в—Џ Hardware clock (real-time)		Yes
в—Џ retentive and synchronizable		Yes
в—Џ Backup time		6 wk; At 40 °C ambient temperature
в—Џ Deviation per day, max.		10 s; Typ.: 2 s
Operating hours counter
в—Џ Number		1
в—Џ Number/Number range		0
в—Џ Range of values		0 to 2^31 hours (when using SFC 101)
в—Џ Granularity		1 h
в—Џ retentive		Yes; Must be restarted at each restart
Clock synchronization
в—Џ supported		Yes
в—Џ to MPI, master		Yes
в—Џ to MPI, slave		Yes
в—Џ to DP, master		Yes; With DP slave only slave clock
в—Џ to DP, slave		Yes
в—Џ on Ethernet via NTP		Yes; As client
Interfaces
Interfaces/bus type		1x MPI/PROFIBUS DP, 1x PROFINET (3 ports)
Number of industrial Ethernet interfaces		1; Ethernet (2 x M12 d-coded; 1 x RJ45)
Number of PROFINET interfaces		3; 3 ports (incl. switch)
Number of wireless interfaces		0
1. Interface
Interface type		Integrated RS 485 interface
Physics		RS 485/connection: 2 x M12 b-coded
Isolated		Yes
Power supply to interface (15 to 30 V DC), max.		May only be used for external terminating resistor
Functionality
в—Џ MPI		Yes
в—Џ PROFIBUS DP master		Yes
в—Џ PROFIBUS DP slave		Yes
в—Џ Point-to-point connection		No
MPI
в—Џ Transmission rate, max.		12 Mbit/s
Services
вЂ” PG/OP communication		Yes
вЂ” Routing		Yes
вЂ” Global data communication		Yes
вЂ” S7 basic communication		Yes
вЂ” S7 communication		Yes
вЂ” S7 communication, as client		No
вЂ” S7 communication, as server		Yes
DP master
в—Џ Transmission rate, max.		12 Mbit/s
в—Џ Number of DP slaves, max.		124
Services
вЂ” PG/OP communication		Yes
вЂ” Routing		Yes
вЂ” Global data communication		No
вЂ” S7 basic communication		Yes; I blocks only
вЂ” S7 communication		Yes
вЂ” S7 communication, as client		No
вЂ” S7 communication, as server		Yes; Connection configured on one side only
вЂ” Equidistance		Yes
вЂ” Isochronous mode		Yes; OB 61 - isochronous mode is possible either on DP or PROFINET IO (not simultaneously)
вЂ” SYNC/FREEZE		Yes
вЂ” Activation/deactivation of DP slaves		Yes
вЂ” Direct data exchange (slave-to-slave communication)		Yes; As subscriber
вЂ” DPV1		Yes
Address area
вЂ” Inputs, max.		2 048 byte
вЂ” Outputs, max.		2 048 byte
User data per DP slave
вЂ” Inputs, max.		244 byte
вЂ” Outputs, max.		244 byte
DP slave
в—Џ Transmission rate, max.		12 Mbit/s
в—Џ automatic baud rate search		Yes; only with passive interface
в—Џ Address area, max.		32
в—Џ User data per address area, max.		32 byte
Services
вЂ” Routing		Yes; with interface active
вЂ” Global data communication		No
вЂ” S7 basic communication		No
вЂ” S7 communication		Yes
вЂ” S7 communication, as client		No
вЂ” S7 communication, as server		Yes; Connection configured on one side only
вЂ” Direct data exchange (slave-to-slave communication)		Yes
вЂ” DPV1		No
Transfer memory
вЂ” Inputs		244 byte
вЂ” Outputs		244 byte
2. Interface
Interface type		PROFINET
Physics		Ethernet (2 x M12 d-coded; 1 x RJ45)
Isolated		Yes; Galvanic isolation for P3 is implemented in IM154-8, for P1 and P2 in CM
automatic detection of transmission rate		Yes; 10/100 Mbit/s
Autonegotiation		Yes
Autocrossing		Yes
Change of IP address at runtime, supported		Yes
Interface types
в—Џ Number of ports		3
в—Џ integrated switch		Yes
Media redundancy
в—Џ supported		Yes
в—Џ Switchover time on line break, typ.		200 ms; PROFINET MRP
в—Џ Number of stations in the ring, max.		50
Functionality
в—Џ MPI		No
в—Џ PROFINET IO Controller		Yes; Also simultaneously with IO-Device functionality
в—Џ PROFINET IO Device		Yes; Also simultaneously with IO Controller functionality
в—Џ PROFINET CBA		Yes
в—Џ PROFIBUS DP master		No
в—Џ PROFIBUS DP slave		No
в—Џ Open IE communication		Yes; Via TCP/IP, ISO on TCP, and UDP
в—Џ Web server		Yes
PROFINET IO Controller
в—Џ Transmission rate, max.		100 Mbit/s
Services
вЂ” PG/OP communication		Yes
вЂ” Routing		Yes
вЂ” S7 routing		Yes
вЂ” S7 communication		Yes; With loadable FBs, max. configurable connections: 14, max. number of instances: 32
вЂ” Isochronous mode		Yes; OB 61 - isochronous mode is possible either on DP or PROFINET IO (not simultaneously)
вЂ” Open IE communication		Yes; Via TCP/IP, ISO on TCP, and UDP
вЂ” IRT		Yes
вЂ” Shared device		Yes
вЂ” Prioritized startup		Yes
вЂ” Number of IO devices with prioritized startup, max.		32
вЂ” Number of connectable IO Devices, max.		128
вЂ” Of which IO devices with IRT, max.		64
вЂ” of which in line, max.		64
вЂ” Number of IO Devices with IRT and the option "high flexibility"		128
вЂ” of which in line, max.		61
вЂ” Number of connectable IO Devices for RT, max.		128
вЂ” of which in line, max.		128
вЂ” Activation/deactivation of IO Devices		Yes
вЂ” Number of IO Devices that can be simultaneously activated/deactivated, max.		8
вЂ” IO Devices changing during operation (partner ports), supported		Yes
вЂ” Number of IO Devices per tool, max.		8
вЂ” Device replacement without swap medium		Yes
вЂ” Send cycles		250 Ојs, 500 Ојs,1 ms; 2 ms, 4 ms (not in the case of IRT with "high flexibility" option)
вЂ” Updating time		250 µs to 512 ms (depending on the operating mode, see "IM 154-8 CPU Interface Module" operating instructions for more details)
Address area
вЂ” Inputs, max.		2 048 byte
вЂ” Outputs, max.		2 048 byte
вЂ” User data consistency, max.		1 024 byte
PROFINET IO Device
Services
вЂ” PG/OP communication		Yes
вЂ” Routing		Yes
вЂ” S7 routing		Yes
вЂ” S7 communication		Yes; With loadable FBs, max. configurable connections: 14, max. number of instances: 32
вЂ” Isochronous mode		No
вЂ” Open IE communication		Yes; Via TCP/IP, ISO on TCP, and UDP
вЂ” IRT		Yes
вЂ” PROFIenergy		Yes; With SFB 73 / 74 prepared for loadable PROFIenergy standard FB for I-Device
вЂ” Shared device		Yes
вЂ” Number of IO Controllers with shared device, max.		2
Transfer memory
вЂ” Inputs, max.		1 440 byte; Per IO Controller with shared device
вЂ” Outputs, max.		1 440 byte; Per IO Controller with shared device
Submodules
вЂ” Number, max.		64
вЂ” User data per submodule, max.		1 024 byte
PROFINET CBA
в—Џ acyclic transmission		Yes
в—Џ cyclic transmission		Yes
Open IE communication
в—Џ Number of connections, max.		8
в—Џ Local port numbers used at the system end		0, 20, 21, 23, 25, 80, 102, 135, 161, 443, 8080, 34962, 34963, 34964, 65532, 65533, 65534, 65535
в—Џ Keep-alive function, supported		Yes
Protocols
Open IE communication
в—Џ TCP/IP		Yes; via integrated PROFINET interface and loadable FBs
вЂ” Data length, max.		32 768 byte; 1460 bytes with connection type 01H; 32768 bytes with connection type 11H
вЂ” several passive connections per port, supported		Yes
в—Џ ISO-on-TCP (RFC1006)		Yes
вЂ” Data length, max.		32 768 byte
в—Џ UDP		Yes
вЂ” Data length, max.		1 472 byte
Web server
в—Џ User-defined websites		Yes
в—Џ Number of HTTP clients		5
Isochronous mode
Isochronous operation (application synchronized up to terminal)		Yes; Via PROFIBUS DP or PROFINET interface
Communication functions
PG/OP communication		Yes
Global data communication
в—Џ supported		Yes
в—Џ Number of GD loops, max.		8
в—Џ Number of GD packets, max.		8
в—Џ Number of GD packets, transmitter, max.		8
в—Џ Number of GD packets, receiver, max.		8
в—Џ Size of GD packets, max.		22 byte
в—Џ Size of GD packet (of which consistent), max.		22 byte
S7 basic communication
в—Џ supported		Yes
в—Џ User data per job, max.		76 byte
в—Џ User data per job (of which consistent), max.		76 byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server)
S7 communication
в—Џ supported		Yes
в—Џ as server		Yes
в—Џ as client		Yes; via integrated PROFINET interface and loadable FBs
в—Џ User data per job, max.		See online help of STEP 7 (shared parameters of the SFBs/FBs and of the SFCs/FCs of S7 Communication)
Web server
в—Џ supported		Yes
PROFINET CBA (at set setpoint communication load)
в—Џ Setpoint for the CPU communication load		50 %
в—Џ Number of remote interconnection partners		32
в—Џ Number of functions, master/slave		30
в—Џ Total of all master/slave connections		1 000
в—Џ Data length of all incoming connections master/slave, max.		4 000 byte
в—Џ Data length of all outgoing connections master/slave, max.		4 000 byte
в—Џ Number of device-internal and PROFIBUS interconnections		500
в—Џ Data length of device-internal und PROFIBUS interconnections, max.		4 000 byte
в—Џ Data length per connection, max.		1 400 byte
Remote interconnections with acyclic transmission
вЂ” Sampling frequency: Sampling time, min.		500 ms
вЂ” Number of incoming interconnections		100
вЂ” Number of outgoing interconnections		100
вЂ” Data length of all incoming interconnections, max.		2 000 byte
вЂ” Data length of all outgoing interconnections, max.		2 000 byte
вЂ” Data length per connection, max.		1 400 byte
Remote interconnections with cyclic transmission
вЂ” Transmission frequency: Transmission interval, min.		1 ms
вЂ” Number of incoming interconnections		200
вЂ” Number of outgoing interconnections		200
вЂ” Data length of all incoming interconnections, max.		2 000 byte
вЂ” Data length of all outgoing interconnections, max.		2 000 byte
вЂ” Data length per connection, max.		450 byte
HMI variables via PROFINET (acyclic)
вЂ” Number of stations that can log on for HMI variables (PN OPC/iMap)		3; 2x PN OPC/1x iMap
вЂ” HMI variable updating		500 ms
вЂ” Number of HMI variables		200
вЂ” Data length of all HMI variables, max.		2 000 byte
PROFIBUS proxy functionality
вЂ” supported		Yes
вЂ” Number of linked PROFIBUS devices		16
вЂ” Data length per connection, max.		240 byte; Slave-dependent
Number of connections
в—Џ overall		16
в—Џ usable for PG communication		15
вЂ” reserved for PG communication		1
вЂ” adjustable for PG communication, min.		1
вЂ” adjustable for PG communication, max.		15
в—Џ usable for OP communication		15
вЂ” reserved for OP communication		1
вЂ” adjustable for OP communication, min.		1
вЂ” adjustable for OP communication, max.		15
в—Џ usable for S7 basic communication		14
вЂ” reserved for S7 basic communication		0
вЂ” adjustable for S7 basic communication, min.		0
вЂ” adjustable for S7 basic communication, max.		14
в—Џ usable for routing		X1 as MPI: max. 10; X1 as DP master: max. 24; X1 as DP slave (active): max. 14; X2 as PROFINET: 24 max.
S7 message functions
Number of login stations for message functions, max.		16; Depending on the configured connections for PG/OP and S7 basic communication
Process diagnostic messages		Yes
simultaneously active Alarm-S blocks, max.		300
Test commissioning functions
Status block		Yes; Up to 2 simultaneously
Single step		Yes
Number of breakpoints		4
Status/control
в—Џ Status/control variable		Yes
в—Џ Variables		Inputs, outputs, memory bits, DB, times, counters
в—Џ Number of variables, max.		30
вЂ” of which status variables, max.		30
вЂ” of which control variables, max.		14
Forcing
в—Џ Forcing		Yes
в—Џ Forcing, variables		I/O
в—Џ Number of variables, max.		10
Diagnostic buffer
в—Џ present		Yes
в—Џ Number of entries, max.		500; Only the last 100 entries are retentive at power on/off
вЂ” adjustable		No
вЂ” preset		10
Potential separation
between backplane bus and electronics		No
between backplane bus and all other circuit components		Yes
between supply and all other circuits		Yes
Isolation
Isolation tested with		In general, 707 V DC (type test), Ethernet interface 1 500 V AC (for P1 and P2 on CM, for P3 on IM)
Degree and class of protection
IP degree of protection		IP65/67
Standards, approvals, certificates
CE mark		Yes
CSA approval		No
cULus		Yes
FM approval		No
RCM (formerly C-TICK)		Yes
Configuration
Configuration software
в—Џ STEP 7		Yes; V5.5 or higher
Programming
в—Џ Command set		see instruction list
в—Џ Nesting levels		8
в—Џ System functions (SFC)		see instruction list
в—Џ System function blocks (SFB)		see instruction list
Programming language
вЂ” LAD		Yes
вЂ” FBD		Yes
вЂ” STL		Yes
вЂ” SCL		Yes
вЂ” CFC		Yes
вЂ” GRAPH		Yes
вЂ” HiGraph®		Yes
Know-how protection
в—Џ User program protection/password protection		Yes
в—Џ Block encryption		Yes; With S7 block Privacy
Dimensions
Width		135 mm
Height		130 mm
Depth		65 mm; 60 mm without cover for RJ45 socket; 65 mm with cover for RJ45 socket
Weights
Weight, approx.		720 g