SIPLUS S7-400 CPU 417 . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS S7-400 CPU 417

| | | | | | |

Article number		6AG1417-4XT07-7AB0
		SIPLUS S7-400 CPU 417-4 V7
General information
Product type designation		CPU 417-4
HW functional status		01
Firmware version		V7.0
Engineering with
в—Џ Programming package		STEP 7 V5.4 or higher with HSP 261
CiR – Configuration in RUN
CiR synchronization time, basic load		60 ms
CiR synchronization time, time per I/O byte		7 µs
Supply voltage
Rated value (DC)
в—Џ 24 V DC		No; Power supply via system power supply
Input current
from backplane bus 5 V DC, typ.		1.3 A
from backplane bus 5 V DC, max.		1.6 A
from backplane bus 24 V DC, max.		600 mA; 150 mA per DP interface
from interface 5 V DC, max.		90 mA; At each DP interface
Power loss
Power loss, typ.		6.5 W
Power loss, max.		8 W
Memory
Type of memory		RAM
Work memory
в—Џ integrated		32 Mbyte
в—Џ integrated (for program)		16 Mbyte
в—Џ integrated (for data)		16 Mbyte
в—Џ expandable		No
Load memory
в—Џ expandable FEPROM		Yes; with Memory Card (FLASH)
в—Џ expandable FEPROM, max.		64 Mbyte
в—Џ integrated RAM, max.		1 Mbyte
в—Џ expandable RAM		Yes; with Memory Card (RAM)
в—Џ expandable RAM, max.		64 Mbyte
Backup
в—Џ present		Yes
в—Џ with battery		Yes; all data
в—Џ without battery		No
Battery
Backup battery
в—Џ Backup current, typ.		225 µA; up to 40 °C
в—Џ Backup current, max.		1 275 µA
в—Џ Backup time, max.		See reference manual, module data, Chapter 3.3
в—Џ Feeding of external backup voltage to CPU		5 V DC to 15 V DC
CPU processing times
for bit operations, typ.		7.5 ns
for word operations, typ.		7.5 ns
for fixed point arithmetic, typ.		7.5 ns
for floating point arithmetic, typ.		15 ns
CPU-blocks
DB
в—Џ Number, max.		16 000; Number range: 1 to 16000
в—Џ Size, max.		64 kbyte
FB
в—Џ Number, max.		8 000; Number range: 0 to 7999
в—Џ Size, max.		64 kbyte
FC
в—Џ Number, max.		8 000; Number range: 0 to 7999
в—Џ Size, max.		64 kbyte
OB
в—Џ Number, max.		see instruction list
в—Џ Size, max.		64 kbyte
в—Џ Number of free cycle OBs		1; OB 1
в—Џ Number of time alarm OBs		8; OB 10-17
в—Џ Number of delay alarm OBs		4; OB 20-23
в—Џ Number of cyclic interrupt OBs		9; OB 30-38 (shortest cycle that can be set = 500 µs)
в—Џ Number of process alarm OBs		8; OB 40-47
в—Џ Number of DPV1 alarm OBs		3; OB 55-57
в—Џ Number of isochronous mode OBs		4; OB 61-64
в—Џ Number of multicomputing OBs		1; OB 60
в—Џ Number of background OBs		1; OB 90
в—Џ Number of startup OBs		3; OB 100-102
в—Џ Number of asynchronous error OBs		9; OB 80-88
в—Џ Number of synchronous error OBs		2; OB 121, 122
Nesting depth
в—Џ per priority class		24
в—Џ additional within an error OB		2
Counters, timers and their retentivity
S7 counter
в—Џ Number		2 048
Retentivity
вЂ” adjustable		Yes
вЂ” lower limit		0
вЂ” upper limit		2 047
вЂ” preset		Z 0 to Z 7
Counting range
вЂ” lower limit		0
вЂ” upper limit		999
IEC counter
в—Џ Number		Unlimited (limited only by RAM capacity)
S7 times
в—Џ Number		2 048
Retentivity
вЂ” adjustable		Yes
вЂ” lower limit		0
вЂ” upper limit		2 047
вЂ” preset		No times retentive
Time range
вЂ” lower limit		10 ms
вЂ” upper limit		9 990 s
IEC timer
в—Џ present		Yes
в—Џ Type		SFB
в—Џ Number		Unlimited (limited only by RAM capacity)
Data areas and their retentivity
retentive data area in total		Total working and load memory (with backup battery)
Flag
в—Џ Number, max.		16 kbyte; Size of bit memory address area
в—Џ Retentivity available		Yes
в—Џ Retentivity preset		MB 0 to MB 15
в—Џ Number of clock memories		8; in 1 memory byte
Local data
в—Џ adjustable, max.		64 kbyte
в—Џ preset		32 kbyte
Address area
I/O address area
в—Џ Inputs		16 kbyte
в—Џ Outputs		16 kbyte
of which distributed
вЂ” MPI/DP interface, inputs		2 kbyte
вЂ” MPI/DP interface, outputs		2 kbyte
вЂ” DP interface, inputs		8 kbyte
вЂ” DP interface, outputs		8 kbyte
Process image
в—Џ Inputs, adjustable		16 kbyte
в—Џ Outputs, adjustable		16 kbyte
в—Џ Inputs, default		1 024 byte
в—Џ Outputs, default		1 024 byte
в—Џ consistent data, max.		244 byte
в—Џ Access to consistent data in process image		Yes
Subprocess images
в—Џ Number of subprocess images, max.		15
Digital channels
в—Џ Inputs		131 072
вЂ” of which central		131 072
в—Џ Outputs		131 072
вЂ” of which central		131 072
Analog channels
в—Џ Inputs		8 192
вЂ” of which central		8 192
в—Џ Outputs		8 192
вЂ” of which central		8 192
Hardware configuration
Number of expansion units, max.		21
connectable OPs		119
Multicomputing		Yes; 4 CPUs max. (with UR1 or UR2)
Interface modules
в—Џ Number of connectable IMs (total), max.		6
в—Џ Number of connectable IM 460s, max.		6
в—Џ Number of connectable IM 463s, max.		4; IM 463-2
Number of DP masters
в—Џ integrated		2
в—Џ via CP		10; CP 443-5 Extended
в—Џ via IM 467		4
в—Џ Mixed mode IM + CP permitted		No; IM 467 cannot be used jointly with CP 443-5 Ext. or CP 443-1 in PROFINET IO mode
в—Џ via interface module		2
в—Џ Number of pluggable S5 modules (via adapter capsule in central device), max.		6
Number of IO Controllers
в—Џ integrated		0
в—Џ via CP		4; Max. 4 in the central controller; no mixed operation of different CP 443-1 types in PROFINET IO mode
Number of operable FMs and CPs (recommended)
в—Џ FM		Limited by number of slots and number of connections
в—Џ CP, PtP		CP 440: Limited by number of slots; CP 441: limited by number of connections
в—Џ PROFIBUS and Ethernet CPs		14; Of which 10 CPs max. or IMs as DP master, 4 PROFINET controller maximum
Slots
в—Џ required slots		2
Time of day
Clock
в—Џ Hardware clock (real-time)		Yes
в—Џ retentive and synchronizable		Yes
в—Џ Resolution		1 ms
в—Џ Deviation per day (buffered), max.		1.7 s; Power off
в—Џ Deviation per day (unbuffered), max.		8.6 s; For power On
Operating hours counter
в—Џ Number		16
в—Џ Number/Number range		0 to 15
в—Џ Range of values		SFCs 2, 3 and 4: 0 to 32767 hours SFC 101: 0 to 2^31 - 1 hours
в—Џ Granularity		1 hour
в—Џ retentive		Yes
Clock synchronization
в—Џ supported		Yes
в—Џ to MPI, master		Yes
в—Џ to MPI, slave		Yes
в—Џ to DP, master		Yes
в—Џ to DP, slave		Yes
в—Џ in AS, master		Yes
в—Џ in AS, slave		Yes
в—Џ on Ethernet via NTP		No; Via CP
в—Џ to IF 964 DP		Yes
Time difference in system when synchronizing via
в—Џ MPI, max.		200 ms
Interfaces
Interfaces/bus type		1 x MPI/PROFIBUS DP, 1 x PROFIBUS DP, 2 x PROFIBUS DP (optionally pluggable)
Number of RS 485 interfaces		2; Combined MPI / PROFIBUS DP and PROFIBUS DP
Number of other interfaces		2; PROFIBUS DP with IF 964-DP (plug-in option; MLFB: 6ES7964-2AA04-0AB0)
1. Interface
Interface type		Integrated
Physics		RS 485 / PROFIBUS + MPI
Isolated		Yes
Power supply to interface (15 to 30 V DC), max.		150 mA
Number of connection resources		MPI: 44, DP: 32
Functionality
в—Џ MPI		Yes
в—Џ PROFIBUS DP master		Yes
в—Џ PROFIBUS DP slave		Yes
MPI
в—Џ Number of connections		44; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1
в—Џ Transmission rate, max.		12 Mbit/s
Services
вЂ” PG/OP communication		Yes
вЂ” Routing		Yes
вЂ” Global data communication		Yes
вЂ” S7 basic communication		Yes
вЂ” S7 communication		Yes
вЂ” S7 communication, as client		Yes
вЂ” S7 communication, as server		Yes
DP master
в—Џ Number of connections, max.		32; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1
в—Џ Transmission rate, max.		12 Mbit/s
в—Џ Number of DP slaves, max.		32
Services
вЂ” PG/OP communication		Yes
вЂ” Routing		Yes; S7 routing
вЂ” Global data communication		No
вЂ” S7 basic communication		Yes
вЂ” S7 communication		Yes
вЂ” S7 communication, as client		Yes
вЂ” S7 communication, as server		Yes
вЂ” Equidistance		Yes
вЂ” Isochronous mode		Yes
вЂ” SYNC/FREEZE		Yes
вЂ” Activation/deactivation of DP slaves		Yes
вЂ” Direct data exchange (slave-to-slave communication)		Yes
вЂ” DPV1		Yes
Address area
вЂ” Inputs, max.		2 kbyte
вЂ” Outputs, max.		2 kbyte
User data per DP slave
вЂ” User data per DP slave, max.		244 byte
вЂ” Inputs, max.		244 byte
вЂ” Outputs, max.		244 byte
вЂ” Slots, max.		244
вЂ” per slot, max.		128 byte
DP slave
в—Џ Number of connections		32
в—Џ GSD file		http://support.automation.siemens.com/WW/view/en/113652
в—Џ Transmission rate, max.		12 Mbit/s
в—Џ automatic baud rate search		No
в—Џ Address area, max.		32; Virtual slots
в—Џ User data per address area, max.		32 byte
вЂ” of which consistent, max.		32 byte
Services
вЂ” PG/OP communication		Yes; with interface active
вЂ” S7 routing		Yes; with interface active
вЂ” Global data communication		No
вЂ” S7 basic communication		No
вЂ” S7 communication		Yes
вЂ” S7 communication, as client		Yes
вЂ” S7 communication, as server		Yes
вЂ” Direct data exchange (slave-to-slave communication)		No
вЂ” DPV1		No
Transfer memory
вЂ” Inputs		244 byte
вЂ” Outputs		244 byte
2. Interface
Interface type		Integrated
Physics		RS 485 / PROFIBUS
Isolated		Yes
Power supply to interface (15 to 30 V DC), max.		150 mA
Number of connection resources		32
Functionality
в—Џ PROFIBUS DP master		Yes
в—Џ PROFIBUS DP slave		Yes
DP master
в—Џ Number of connections, max.		32
в—Џ Transmission rate, max.		12 Mbit/s
в—Џ Number of DP slaves, max.		125
Services
вЂ” PG/OP communication		Yes
вЂ” Routing		Yes; S7 routing
вЂ” Global data communication		No
вЂ” S7 basic communication		Yes
вЂ” S7 communication		Yes
вЂ” S7 communication, as client		Yes
вЂ” S7 communication, as server		Yes
вЂ” Equidistance		Yes
вЂ” Isochronous mode		Yes
вЂ” SYNC/FREEZE		Yes
вЂ” Activation/deactivation of DP slaves		Yes
вЂ” Direct data exchange (slave-to-slave communication)		Yes
вЂ” DPV1		Yes
Address area
вЂ” Inputs, max.		8 kbyte
вЂ” Outputs, max.		8 kbyte
User data per DP slave
вЂ” User data per DP slave, max.		244 byte
вЂ” Inputs, max.		244 byte
вЂ” Outputs, max.		244 byte
вЂ” Slots, max.		244
вЂ” per slot, max.		128 byte
DP slave
в—Џ Number of connections		32
в—Џ GSD file		http://support.automation.siemens.com/WW/view/en/113652
в—Џ Transmission rate, max.		12 Mbit/s
в—Џ Address area, max.		32
в—Џ User data per address area, max.		32 byte
вЂ” of which consistent, max.		32 byte
Services
вЂ” Routing		Yes; with interface active
Transfer memory
вЂ” Inputs		244 byte
вЂ” Outputs		244 byte
3. Interface
Interface type		Pluggable interface module (IF), technical data as for 2nd interface
Plug-in interface modules		IF 964-DP (MLFB: 6ES7964-2AA04-0AB0)
Physics		RS 485 / PROFIBUS
Isolated		Yes
Power supply to interface (15 to 30 V DC), max.		150 mA
automatic detection of transmission rate		No
Number of connection resources		32
Functionality
в—Џ MPI		No
в—Џ PROFIBUS DP master		Yes
в—Џ PROFIBUS DP slave		Yes
DP master
в—Џ Number of connections, max.		32
в—Џ Number of DP slaves, max.		125
Services
вЂ” PG/OP communication		Yes
вЂ” Routing		Yes; S7 routing
вЂ” Global data communication		No
вЂ” S7 basic communication		Yes
вЂ” S7 communication		Yes
вЂ” S7 communication, as client		Yes
вЂ” S7 communication, as server		Yes
вЂ” Equidistance		Yes
вЂ” Isochronous mode		Yes
вЂ” SYNC/FREEZE		Yes
вЂ” Activation/deactivation of DP slaves		Yes
вЂ” Direct data exchange (slave-to-slave communication)		Yes
вЂ” DPV0		Yes
вЂ” DPV1		Yes
Address area
вЂ” Inputs, max.		8 kbyte
вЂ” Outputs, max.		8 kbyte
User data per DP slave
вЂ” User data per DP slave, max.		244 byte
вЂ” Inputs, max.		244 byte
вЂ” Outputs, max.		244 byte
вЂ” Slots, max.		244
вЂ” per slot, max.		128 byte
DP slave
в—Џ Number of connections		32
в—Џ GSD file		http://support.automation.siemens.com/WW/view/en/113652
в—Џ Transmission rate, max.		12 Mbit/s
в—Џ automatic baud rate search		No
в—Џ Address area, max.		32
в—Џ User data per address area, max.		32 byte
вЂ” of which consistent, max.		32 byte
Services
вЂ” PG/OP communication		Yes
вЂ” S7 routing		Yes; with interface active
вЂ” Global data communication		No
вЂ” S7 basic communication		No
вЂ” S7 communication		Yes
вЂ” S7 communication, as client		Yes
вЂ” S7 communication, as server		Yes
вЂ” Direct data exchange (slave-to-slave communication)		No
вЂ” DPV1		No
Transfer memory
вЂ” Inputs		244 byte
вЂ” Outputs		244 byte
4. Interface
Interface type		Pluggable interface module (IF), technical data as for 2nd interface
Plug-in interface modules		IF 964-DP (MLFB: 6ES7964-2AA04-0AB0)
Open IE communication
в—Џ ISO-on-TCP (RFC1006)		Via CP 443-1 and loadable FB
вЂ” Data length, max.		1452 bytes via CP 443-1 Adv.
Isochronous mode
Isochronous operation (application synchronized up to terminal)		Yes; For PROFIBUS only
Equidistance		Yes
Number of DP masters with isochronous mode		4
User data per isochronous slave, max.		244 byte
shortest clock pulse		1 ms; 0.5 ms without use of SFC 126, 127
max. cycle		32 ms
Communication functions
PG/OP communication		Yes
в—Џ Number of connectable OPs without message processing		119
в—Џ Number of connectable OPs with message processing		119; When using Alarm_S/SQ and Alarm_D/DQ
Data record routing		Yes
Global data communication
в—Џ supported		Yes
в—Џ Number of GD loops, max.		16
в—Џ Number of GD packets, transmitter, max.		16
в—Џ Number of GD packets, receiver, max.		32
в—Џ Size of GD packets, max.		54 byte
в—Џ Size of GD packet (of which consistent), max.		1 variable
S7 basic communication
в—Џ supported		Yes
в—Џ User data per job, max.		76 byte
в—Џ User data per job (of which consistent), max.		1 variable
S7 communication
в—Џ supported		Yes
в—Џ as server		Yes
в—Џ as client		Yes
в—Џ User data per job, max.		64 kbyte
в—Џ User data per job (of which consistent), max.		462 byte; 1 variable
S5 compatible communication
в—Џ supported		Yes; Via FC AG_SEND and AG_RECV, max. via 10 CP 443-1 or 443-5
в—Џ User data per job, max.		8 kbyte
в—Џ User data per job (of which consistent), max.		240 byte
в—Џ Number of simultaneous AG-SEND/AG-RECV orders per CPU, max.		64/64
Standard communication (FMS)
в—Џ supported		Yes; Via CP and loadable FB
Web server
в—Џ supported		No
Number of connections
в—Џ overall		120
в—Џ usable for PG communication		119
вЂ” reserved for PG communication		1
вЂ” adjustable for PG communication, max.		0
в—Џ usable for OP communication		119
вЂ” reserved for OP communication		1
вЂ” adjustable for OP communication, max.		0
в—Џ usable for S7 basic communication		118
вЂ” reserved for S7 basic communication		0
вЂ” adjustable for S7 basic communication, max.		0
в—Џ usable for S7 communication		118
вЂ” reserved for S7 communication		0
вЂ” adjustable for S7 communication, max.		0
в—Џ usable for routing		59
вЂ” reserved for routing		0
вЂ” adjustable for routing, max.		0
S7 message functions
Number of login stations for message functions, max.		119; Max. 119 with Alarm_S/SQ and Alarm_D/DQ (OPs); max. 16 with Alarm, Alarm_8, Alarm_8P, Notify and Notify_8 (e.g. WinCC)
Symbol-related messages		Yes
SCAN procedure		Yes
Program alarms		Yes
Process diagnostic messages		Yes
simultaneously active Alarm-S blocks, max.		1 000; Simultaneously active alarm_S/SQ blocks or alarm_D/DQ blocks
Alarm 8-blocks		Yes
в—Џ Number of instances for alarm 8 and S7 communication blocks, max.		10 000
в—Џ preset, max.		1 200
Process control messages		Yes
Number of archives that can log on simultaneously (SFB 37 AR_SEND)		64
Number of messages
в—Џ overall, max.		1 024
в—Џ in 100 ms grid, max.		128
в—Џ in 500 ms grid, max.		512
в—Џ in 1000 ms grid, max.		1 024
Number of additional values
в—Џ with 100 ms grid, max.		1
в—Џ with 500, 1000 ms grid, max.		10
Test commissioning functions
Status block		Yes; Up to 16 simultaneously
Single step		Yes
Number of breakpoints		16
Status/control
в—Џ Status/control variable		Yes; Up to 16 variable tables
в—Џ Variables		Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters
в—Џ Number of variables, max.		70; Status/control
Forcing
в—Џ Forcing		Yes
в—Џ Forcing, variables		Inputs, outputs, bit memories, peripheral inputs, peripheral outputs
в—Џ Number of variables, max.		512
Diagnostic buffer
в—Џ present		Yes
в—Џ Number of entries, max.		3 200
вЂ” adjustable		Yes
вЂ” preset		120
Service data
в—Џ can be read out		Yes
Standards, approvals, certificates
CE mark		Yes
EAC (formerly Gost-R)		Yes
Ambient conditions
Ambient temperature during operation
в—Џ min.		-25 °C; = Tmin
в—Џ max.		70 °C; = Tmax
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation
Resistance
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3		Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Configuration
Configuration software
в—Џ STEP 7		Yes
Programming
в—Џ Command set		see instruction list
в—Џ Nesting levels		7
в—Џ Access to consistent data in process image		Yes
в—Џ System functions (SFC)		see instruction list
в—Џ System function blocks (SFB)		see instruction list
Programming language
вЂ” LAD		Yes
вЂ” FBD		Yes
вЂ” STL		Yes
вЂ” SCL		Yes
вЂ” CFC		Yes
вЂ” GRAPH		Yes
вЂ” HiGraph®		Yes
Number of simultaneously active SFCs
вЂ” DPSYC_FR		2; SFC 11; per interface
вЂ” D_ACT_DP		8; SFC 12; per interface
вЂ” RD_REC		8; SFC 59; per interface
вЂ” WR_REC		8; SFC 58; per interface
вЂ” WR_PARM		8; SFC 55; per interface
вЂ” PARM_MOD		1; SFC 57; per interface
вЂ” WR_DPARM		2; SFC 56; per interface
вЂ” DPNRM_DG		8; SFC 13; per interface
вЂ” RDSYSST		8; SFC 51
вЂ” DP_TOPOL		1; SFC 103; per interface
Number of simultaneously active SFBs
вЂ” RDREC		8; SFB 52; per interface, but not more than 32 across all external interfaces
вЂ” WRREC		8; SFB 53; per interface, but not more than 32 across all external interfaces
Know-how protection
в—Џ User program protection/password protection		Yes
в—Џ Block encryption		Yes; With S7 block Privacy
Dimensions
Width		50 mm
Height		290 mm
Depth		219 mm
Weights
Weight, approx.		900 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания