CPU 416 . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на CPU 416

| | | | | | | |

Article number	6ES7416-2XP07-0AB0	6ES7416-3XS07-0AB0	6ES7416-3ES07-0AB0
	CPU 416-2, MPI, PROFIBUS, 8 MB	CPU 416-3, 16 MB, 3 INTERFACES	CPU416-3 PN/DP, 16 MB, 3 INTERFACES
General information
Product type designation	CPU 416-2	CPU 416-3	CPU 416-3 PN/DP
HW functional status	01	01	01
Firmware version	V7.0	V7.0	V7.0
Engineering with
в—Џ Programming package	STEP 7 V5.4 or higher with HSP 261	STEP 7 V5.4 or higher with HSP 261	STEP 7 V5.5 or higher with HSP 262
CiR – Configuration in RUN
CiR synchronization time, basic load	100 ms	100 ms	100 ms
CiR synchronization time, time per I/O byte	10 µs	10 µs	10 µs
Supply voltage
Rated value (DC)
в—Џ 24 V DC	No; Power supply via system power supply	No; Power supply via system power supply	No; Power supply via system power supply
Input current
from backplane bus 5 V DC, typ.	0.9 A	1.1 A	1.3 A
from backplane bus 5 V DC, max.	1.1 A	1.3 A	1.6 A
from backplane bus 24 V DC, max.	300 mA; 150 mA per DP interface	450 mA; 150 mA per DP interface	300 mA; 150 mA per DP interface
from interface 5 V DC, max.	90 mA; At each DP interface	90 mA; At each DP interface	90 mA; At each DP interface
Power loss
Power loss, typ.	4.5 W	5.5 W	6.5 W
Power loss, max.	5.5 W	6.5 W	8 W
Memory
Type of memory	RAM	RAM	RAM
Work memory
в—Џ integrated	8 Mbyte	16 Mbyte	16 Mbyte
в—Џ integrated (for program)	4 Mbyte	8 Mbyte	8 Mbyte
в—Џ integrated (for data)	4 Mbyte	8 Mbyte	8 Mbyte
в—Џ expandable	No	No	No
Load memory
в—Џ expandable FEPROM	Yes; with Memory Card (FLASH)	Yes; with Memory Card (FLASH)	Yes; with Memory Card (FLASH)
в—Џ expandable FEPROM, max.	64 Mbyte	64 Mbyte	64 Mbyte
в—Џ integrated RAM, max.	1 Mbyte	1 Mbyte	1 Mbyte
в—Џ expandable RAM	Yes; with Memory Card (RAM)	Yes; with Memory Card (RAM)	Yes; with Memory Card (RAM)
в—Џ expandable RAM, max.	64 Mbyte	64 Mbyte	64 Mbyte
Backup
в—Џ present	Yes	Yes	Yes
в—Џ with battery	Yes; all data	Yes; all data	Yes; all data
в—Џ without battery	No	No	No
Battery
Backup battery
в—Џ Backup current, typ.	180 µA; up to 40 °C	180 µA; up to 40 °C	180 µA; up to 40 °C
в—Џ Backup current, max.	850 µA	850 µA	850 µA
в—Џ Backup time, max.	Dealt with in the module data manual with the secondary conditions and the factors of influence	Dealt with in the module data manual with the secondary conditions and the factors of influence	Dealt with in the module data manual with the secondary conditions and the factors of influence
в—Џ Feeding of external backup voltage to CPU	5 V DC to 15 V DC	5 V DC to 15 V DC	5 V DC to 15 V DC
CPU processing times
for bit operations, typ.	12.5 ns	12.5 ns	12.5 ns
for word operations, typ.	12.5 ns	12.5 ns	12.5 ns
for fixed point arithmetic, typ.	12.5 ns	12.5 ns	12.5 ns
for floating point arithmetic, typ.	25 ns	25 ns	25 ns
CPU-blocks
DB
в—Џ Number, max.	10 000; Number range: 1 to 16000	10 000; Number range: 1 to 16000	10 000; Number range: 1 to 16000
в—Џ Size, max.	64 kbyte	64 kbyte	64 kbyte
FB
в—Џ Number, max.	5 000; Number range: 0 to 7999	5 000; Number range: 0 to 7999	5 000; Number range: 0 to 7999
в—Џ Size, max.	64 kbyte	64 kbyte	64 kbyte
FC
в—Џ Number, max.	5 000; Number range: 0 to 7999	5 000; Number range: 0 to 7999	5 000; Number range: 0 to 7999
в—Џ Size, max.	64 kbyte	64 kbyte	64 kbyte
OB
в—Џ Number, max.	see instruction list	see instruction list	see instruction list
в—Џ Size, max.	64 kbyte	64 kbyte	64 kbyte
в—Џ Number of free cycle OBs	1; OB 1	1; OB 1	1; OB 1
в—Џ Number of time alarm OBs	8; OB 10-17	8; OB 10-17	8; OB 10-17
в—Џ Number of delay alarm OBs	4; OB 20-23	4; OB 20-23	4; OB 20-23
в—Џ Number of cyclic interrupt OBs	9; OB 30-38 (shortest cycle that can be set = 500 µs)	9; OB 30-38 (shortest cycle that can be set = 500 µs)	9; OB 30-38 (shortest cycle that can be set = 500 µs)
в—Џ Number of process alarm OBs	8; OB 40-47	8; OB 40-47	8; OB 40-47
в—Џ Number of DPV1 alarm OBs	3; OB 55-57	3; OB 55-57	3; OB 55-57
в—Џ Number of isochronous mode OBs	4; OB 61-64	4; OB 61-64	4; OB 61-64
в—Џ Number of multicomputing OBs	1; OB 60	1; OB 60	1; OB 60
в—Џ Number of background OBs	1; OB 90	1; OB 90	1; OB 90
в—Џ Number of startup OBs	3; OB 100-102	3; OB 100-102	3; OB 100-102
в—Џ Number of asynchronous error OBs	9; OB 80-88	9; OB 80-88	9; OB 80-88
в—Џ Number of synchronous error OBs	2; OB 121, 122	2; OB 121, 122	2; OB 121, 122
Nesting depth
в—Џ per priority class	24	24	24
в—Џ additional within an error OB	2	2	2
Counters, timers and their retentivity
S7 counter
в—Џ Number	2 048	2 048	2 048
Retentivity
вЂ” adjustable	Yes	Yes	Yes
вЂ” lower limit	0	0	0
вЂ” upper limit	2 047	2 047	2 047
вЂ” preset	Z 0 to Z 7	Z 0 to Z 7	Z 0 to Z 7
Counting range
вЂ” lower limit	0	0	0
вЂ” upper limit	999	999	999
IEC counter
в—Џ Number	Unlimited (limited only by RAM capacity)	Unlimited (limited only by RAM capacity)	Unlimited (limited only by RAM capacity)
S7 times
в—Џ Number	2 048	2 048	2 048
Retentivity
вЂ” adjustable	Yes	Yes	Yes
вЂ” lower limit	0	0	0
вЂ” upper limit	2 047	2 047	2 047
вЂ” preset	No times retentive	No times retentive	No times retentive
Time range
вЂ” lower limit	10 ms	10 ms	10 ms
вЂ” upper limit	9 990 s	9 990 s	9 990 s
IEC timer
в—Џ present	Yes	Yes	Yes
в—Џ Type	SFB	SFB	SFB
в—Џ Number	Unlimited (limited only by RAM capacity)	Unlimited (limited only by RAM capacity)	Unlimited (limited only by RAM capacity)
Data areas and their retentivity
retentive data area in total	Total working and load memory (with backup battery)	Total working and load memory (with backup battery)	Total working and load memory (with backup battery)
Flag
в—Џ Number, max.	16 kbyte; Size of bit memory address area	16 kbyte; Size of bit memory address area	16 kbyte; Size of bit memory address area
в—Џ Retentivity available	Yes	Yes	Yes
в—Џ Retentivity preset	MB 0 to MB 15	MB 0 to MB 15	MB 0 to MB 15
в—Џ Number of clock memories	8; in 1 memory byte	8; in 1 memory byte	8; in 1 memory byte
Data blocks
в—Џ Number, max.	10 000; Number range: 1 to 16000	10 000; Number range: 1 to 16000	10 000; Number range: 1 to 16000
в—Џ Size, max.	64 kbyte	64 kbyte	64 kbyte
Local data
в—Џ adjustable, max.	32 kbyte	32 kbyte	32 kbyte
в—Џ preset	16 kbyte	16 kbyte	16 kbyte
Address area
I/O address area
в—Џ Inputs	16 kbyte	16 kbyte	16 kbyte
в—Џ Outputs	16 kbyte	16 kbyte	16 kbyte
of which distributed
вЂ” MPI/DP interface, inputs	2 kbyte	2 kbyte	2 kbyte
вЂ” MPI/DP interface, outputs	2 kbyte	2 kbyte	2 kbyte
вЂ” DP interface, inputs	8 kbyte	8 kbyte	8 kbyte
вЂ” DP interface, outputs	8 kbyte	8 kbyte	8 kbyte
вЂ” PROFINET interface, inputs			8 kbyte
вЂ” PROFINET interface, outputs			8 kbyte
Process image
в—Џ Inputs, adjustable	16 kbyte	16 kbyte	16 kbyte
в—Џ Outputs, adjustable	16 kbyte	16 kbyte	16 kbyte
в—Џ Inputs, default	512 byte	512 byte	512 byte
в—Џ Outputs, default	512 byte	512 byte	512 byte
в—Џ consistent data, max.	244 byte	244 byte	244 byte
в—Џ Access to consistent data in process image	Yes	Yes	Yes
Subprocess images
в—Џ Number of subprocess images, max.	15	15	15
Digital channels
в—Џ Inputs	131 072	131 072	131 072
вЂ” of which central	131 072	131 072	131 072
в—Џ Outputs	131 072	131 072	131 072
вЂ” of which central	131 072	131 072	131 072
в—Џ Number of addressable digital I/Os, max.	131 072; Inputs and outputs in each case	131 072; Inputs and outputs in each case	131 072; Inputs and outputs in each case
Analog channels
в—Џ Inputs	8 192	8 192	8 192
вЂ” of which central	8 192	8 192	8 192
в—Џ Outputs	8 192	8 192	8 192
вЂ” of which central	8 192	8 192	8 192
в—Џ Number of addressable analog I/Os, max.	8 192; Inputs and outputs in each case	8 192; Inputs and outputs in each case	8 192; Inputs and outputs in each case
Hardware configuration
Number of expansion units, max.	21	21	21
connectable OPs	95	95	95
Multicomputing	Yes; 4 CPUs max. (with UR1 or UR2)	Yes; 4 CPUs max. (with UR1 or UR2)	Yes; 4 CPUs max. (with UR1 or UR2)
Interface modules
в—Џ Number of connectable IMs (total), max.	6	6	6
в—Џ Number of connectable IM 460s, max.	6	6	6
в—Џ Number of connectable IM 463s, max.	4; IM 463-2	4; IM 463-2	4; IM 463-2
Number of DP masters
в—Џ integrated	2	2	1
в—Џ via CP	10; CP 443-5 Extended	10; CP 443-5 Extended	10; CP 443-5 Extended
в—Џ via IM 467	4	4	4
в—Џ Mixed mode IM + CP permitted	No; IM 467 cannot be used jointly with CP 443-5 Ext. or CP 443-1 in PROFINET IO mode	No; IM 467 cannot be used jointly with CP 443-5 Ext. or CP 443-1 in PROFINET IO mode	No; IM 467 cannot be used jointly with CP 443-5 Ext. or CP 443-1 in PROFINET IO mode
в—Џ via interface module	0	1	1; IF 964-DP
в—Џ Number of pluggable S5 modules (via adapter capsule in central device), max.	6	6	6
Number of IO Controllers
в—Џ integrated	0	0	1
в—Џ via CP	4; Max. 4 in the central controller; no mixed operation of different CP 443-1 types in PROFINET IO mode	4; No mixed operation of CP443-1 EX40 and CP443-1 EX 41/EX20/GX20, max. 4 in central controller	4; Max. 4 in the central controller; no mixed operation of different CP 443-1 types in PROFINET IO mode
Number of operable FMs and CPs (recommended)
в—Џ FM	Limited by number of slots and number of connections	Limited by number of slots and number of connections	Limited by number of slots or number of connections
в—Џ CP, PtP	CP 440: Limited by number of slots; CP 441: limited by number of connections	CP 440: Limited by number of slots; CP 441: limited by number of connections	CP 440: Limited by number of slots; CP 441: Limited by number of slots and number of connections
в—Џ PROFIBUS and Ethernet CPs	14; In total max. 10 CPs as DP master and PROFINET controller, of which up to 10 IMs or CPs as DP master and up to 4 CPs as PROFINET controller	14; In total max. 10 CPs as DP master and PROFINET controller, of which up to 10 IMs or CPs as DP master and up to 4 CPs as PROFINET controller	14; In total max. 10 CPs as DP master and PROFINET controller, of which up to 10 IMs or CPs as DP master and up to 4 CPs as PROFINET controller
Slots
в—Џ required slots	1	2	2
Time of day
Clock
в—Џ Hardware clock (real-time)	Yes	Yes	Yes
в—Џ retentive and synchronizable	Yes	Yes	Yes
в—Џ Resolution	1 ms	1 ms	1 ms
в—Џ Deviation per day (buffered), max.	1.7 s; Power off	1.7 s; Power off	1.7 s; Power off
в—Џ Deviation per day (unbuffered), max.	8.6 s; For power On	8.6 s; For power On	8.6 s; For power On
Operating hours counter
в—Џ Number	16	16	16
в—Џ Number/Number range	0 to 15	0 to 15	0 to 15
в—Џ Range of values	SFCs 2, 3 and 4: 0 to 32767 hours SFC 101: 0 to 2^31 - 1 hours	SFCs 2, 3 and 4: 0 to 32767 hours SFC 101: 0 to 2^31 - 1 hours	SFCs 2, 3 and 4: 0 to 32767 hours SFC 101: 0 to 2^31 - 1 hours
в—Џ Granularity	1 hour	1 hour	1 hour
в—Џ retentive	Yes	Yes	Yes
Clock synchronization
в—Џ supported	Yes	Yes	Yes
в—Џ to MPI, master	Yes	Yes	Yes
в—Џ to MPI, slave	Yes	Yes	Yes
в—Џ to DP, master	Yes	Yes	Yes
в—Џ to DP, slave	Yes	Yes	Yes
в—Џ in AS, master	Yes	Yes	Yes
в—Џ in AS, slave	Yes	Yes	Yes
в—Џ on Ethernet via NTP	No; Via CP	No; Via CP	Yes; As client
в—Џ to IF 964 DP	No	Yes	Yes
Time difference in system when synchronizing via
в—Џ Ethernet, max.			10 ms
в—Џ MPI, max.	200 ms	200 ms	200 ms
Interfaces
Interfaces/bus type	1 x MPI/PROFIBUS DP, 1 x PROFIBUS DP	1 x MPI/PROFIBUS DP, 1 x PROFIBUS DP, 1 x PROFIBUS DP (optionally pluggable)	1 x MPI/PROFIBUS DP, 1 x PROFINET (2 ports), 1 x PROFIBUS DP (optionally pluggable)
Number of RS 485 interfaces	2; Combined MPI / PROFIBUS DP and PROFIBUS DP	2; Combined MPI / PROFIBUS DP and PROFIBUS DP	1; Combined MPI / PROFIBUS DP
Number of other interfaces		1; PROFIBUS DP with IF 964-DP (plug-in option; MLFB: 6ES7964-2AA04-0AB0)	1; PROFIBUS DP with IF 964-DP (plug-in option; MLFB: 6ES7964-2AA04-0AB0)
1. Interface
Interface type	Integrated	Integrated	Integrated
Physics	RS 485 / PROFIBUS + MPI	RS 485 / PROFIBUS + MPI	RS 485 / PROFIBUS + MPI
Isolated	Yes	Yes	Yes
Power supply to interface (15 to 30 V DC), max.	150 mA	150 mA	150 mA
Number of connection resources	MPI: 44, DP: 32	MPI: 44, DP: 32	MPI: 44, DP: 32
Functionality
в—Џ MPI	Yes	Yes	Yes
в—Џ PROFIBUS DP master	Yes	Yes	Yes
в—Џ PROFIBUS DP slave	Yes	Yes	Yes
MPI
в—Џ Number of connections	44; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1	44; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1	44; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1
в—Џ Transmission rate, max.	12 Mbit/s	12 Mbit/s	12 Mbit/s
Services
вЂ” PG/OP communication	Yes	Yes	Yes
вЂ” Routing	Yes	Yes	Yes
вЂ” Global data communication	Yes	Yes	Yes
вЂ” S7 basic communication	Yes	Yes	Yes
вЂ” S7 communication	Yes	Yes	Yes
вЂ” S7 communication, as client	Yes	Yes	Yes
вЂ” S7 communication, as server	Yes	Yes	Yes
DP master
в—Џ Number of connections, max.	32; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1	32; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1	32; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1
в—Џ Transmission rate, max.	12 Mbit/s	12 Mbit/s	12 Mbit/s
в—Џ Number of DP slaves, max.	32	32	32
Services
вЂ” PG/OP communication	Yes	Yes	Yes
вЂ” Routing	Yes; S7 routing	Yes; S7 routing	Yes; S7 routing
вЂ” Global data communication	No	No	No
вЂ” S7 basic communication	Yes	Yes	Yes
вЂ” S7 communication	Yes	Yes	Yes
вЂ” S7 communication, as client	Yes	Yes	Yes
вЂ” S7 communication, as server	Yes	Yes	Yes
вЂ” Equidistance	Yes	Yes	Yes
вЂ” Isochronous mode	Yes	Yes	Yes
вЂ” SYNC/FREEZE	Yes	Yes	Yes
вЂ” Activation/deactivation of DP slaves	Yes	Yes	Yes
вЂ” Direct data exchange (slave-to-slave communication)	Yes	Yes	Yes
вЂ” DPV1	Yes	Yes	Yes
Address area
вЂ” Inputs, max.	2 kbyte	2 kbyte	2 kbyte
вЂ” Outputs, max.	2 kbyte	2 kbyte	2 kbyte
User data per DP slave
вЂ” User data per DP slave, max.	244 byte	244 byte	244 byte
вЂ” Inputs, max.	244 byte	244 byte	244 byte
вЂ” Outputs, max.	244 byte	244 byte	244 byte
вЂ” Slots, max.	244	244	244
вЂ” per slot, max.	128 byte	128 byte	128 byte
DP slave
в—Џ Number of connections	32	32	32
в—Џ GSD file	http://support.automation.siemens.com/WW/view/en/113652	http://support.automation.siemens.com/WW/view/en/113652	http://support.automation.siemens.com/WW/view/en/113652
в—Џ Transmission rate, max.	12 Mbit/s	12 Mbit/s	12 Mbit/s
в—Џ automatic baud rate search	No	No	No
в—Џ Address area, max.	32; Virtual slots	32; Virtual slots	32; Virtual slots
в—Џ User data per address area, max.	32 byte	32 byte	32 byte
вЂ” of which consistent, max.	32 byte	32 byte	32 byte
Services
вЂ” PG/OP communication	Yes; with interface active	Yes; with interface active	Yes; with interface active
вЂ” S7 routing	Yes; with interface active	Yes; with interface active	Yes; with interface active
вЂ” Global data communication	No	No	No
вЂ” S7 basic communication	No	No	No
вЂ” S7 communication	Yes	Yes	Yes
вЂ” S7 communication, as client	Yes	Yes	Yes
вЂ” S7 communication, as server	Yes	Yes	Yes
вЂ” Direct data exchange (slave-to-slave communication)	No	No	No
вЂ” DPV1	No	No	No
Transfer memory
вЂ” Inputs	244 byte	244 byte	244 byte
вЂ” Outputs	244 byte	244 byte	244 byte
2. Interface
Interface type	Integrated	Integrated	PROFINET
Physics	RS 485 / PROFIBUS	RS 485 / PROFIBUS	Ethernet RJ45
Isolated	Yes	Yes	Yes
Power supply to interface (15 to 30 V DC), max.	150 mA	150 mA
automatic detection of transmission rate			Yes; Autosensing
Autonegotiation			Yes
Autocrossing			Yes
Change of IP address at runtime, supported			Yes; Assignment by higher-level IO-Controller or by the user program with SFB104 "IP_CONF"
Number of connection resources	32	32	96
Interface types
в—Џ Number of ports			2
в—Џ integrated switch			Yes
Media redundancy
в—Џ supported			Yes
в—Џ Switchover time on line break, typ.			200 ms
в—Џ Number of stations in the ring, max.			50
Functionality
в—Џ PROFINET IO Controller			Yes
в—Џ PROFINET IO Device			Yes
в—Џ PROFINET CBA			Yes
в—Џ PROFIBUS DP master	Yes	Yes	No
в—Џ PROFIBUS DP slave	Yes	Yes	No
в—Џ Open IE communication			Yes
в—Џ Web server			Yes
вЂ” Number of HTTP clients			5
в—Џ Point-to-point connection			No
DP master
в—Џ Number of connections, max.	32	32
в—Џ Transmission rate, max.	12 Mbit/s	12 Mbit/s
в—Џ Number of DP slaves, max.	125	125
Services
вЂ” PG/OP communication	Yes	Yes
вЂ” Routing	Yes; S7 routing	Yes; S7 routing
вЂ” Global data communication	No	No
вЂ” S7 basic communication	Yes	Yes
вЂ” S7 communication	Yes	Yes
вЂ” S7 communication, as client	Yes	Yes
вЂ” S7 communication, as server	Yes	Yes
вЂ” Equidistance	Yes	Yes
вЂ” Isochronous mode	Yes	Yes
вЂ” SYNC/FREEZE	Yes	Yes
вЂ” Activation/deactivation of DP slaves	Yes	Yes
вЂ” Direct data exchange (slave-to-slave communication)	Yes	Yes
вЂ” DPV1	Yes	Yes
Address area
вЂ” Inputs, max.	8 kbyte	8 kbyte
вЂ” Outputs, max.	8 kbyte	8 kbyte
User data per DP slave
вЂ” User data per DP slave, max.	244 byte	244 byte
вЂ” Inputs, max.	244 byte	244 byte
вЂ” Outputs, max.	244 byte	244 byte
вЂ” Slots, max.	244	244
вЂ” per slot, max.	128 byte	128 byte
DP slave
в—Џ Number of connections	32	32
в—Џ GSD file	http://support.automation.siemens.com/WW/view/en/113652	http://support.automation.siemens.com/WW/view/en/113652
в—Џ Transmission rate, max.	12 Mbit/s	12 Mbit/s
в—Џ Address area, max.	32	32
в—Џ User data per address area, max.	32 byte	32 byte
вЂ” of which consistent, max.	32 byte	32 byte
Services
вЂ” Routing	Yes; with interface active	Yes; with interface active
Transfer memory
вЂ” Inputs	244 byte	244 byte
вЂ” Outputs	244 byte	244 byte
PROFINET IO Controller
в—Џ Transmission rate, max.			100 Mbit/s
Services
вЂ” PG/OP communication			Yes
вЂ” S7 routing			Yes
вЂ” S7 communication			Yes
вЂ” Isochronous mode			Yes; Only with IRT and the High Performance option
вЂ” Open IE communication			Yes
вЂ” Shared device			Yes
вЂ” Prioritized startup			Yes
вЂ” Number of IO devices with prioritized startup, max.			32
вЂ” Number of connectable IO Devices, max.			256
вЂ” Of which IO devices with IRT, max.			64
вЂ” of which in line, max.			64
вЂ” Number of IO Devices with IRT and the option "high flexibility"			256
вЂ” of which in line, max.			61
вЂ” Number of connectable IO Devices for RT, max.			256
вЂ” of which in line, max.			256
вЂ” Activation/deactivation of IO Devices			Yes
вЂ” Number of IO Devices that can be simultaneously activated/deactivated, max.			8
вЂ” IO Devices changing during operation (partner ports), supported			Yes
вЂ” Number of IO Devices per tool, max.			8; 8 parallel calls of the SFC 12 "D_ACT_DP" possible per line. Max. 32 IO Devices changing during operation (partner ports) are supported
вЂ” Device replacement without swap medium			Yes
вЂ” Send cycles			250 Ојs, 500 Ојs, 1 ms, 2 ms, 4 ms additionally with IRT with high performance: 250 µs to 4 ms in 125 µs frame
вЂ” Updating time			250 µs to 512 ms; minimum value depends on preset communication share for PROFINET IO, on the number of IO Devices and on the amount of configured user data, see PROFINET system description
Address area
вЂ” Inputs, max.			8 kbyte
вЂ” Outputs, max.			8 kbyte
вЂ” User data consistency, max.			1 024 byte
PROFINET IO Device
Services
вЂ” PG/OP communication			Yes
вЂ” S7 routing			Yes
вЂ” S7 communication			Yes
вЂ” Isochronous mode			No
вЂ” Open IE communication			Yes
вЂ” IRT			Yes
вЂ” Prioritized startup			Yes
вЂ” Shared device			Yes
вЂ” Number of IO Controllers with shared device, max.			2
Transfer memory
вЂ” Inputs, max.			1 440 byte; Per IO Controller with shared device
вЂ” Outputs, max.			1 440 byte; Per IO Controller with shared device
Submodules
вЂ” Number, max.			64
вЂ” User data per submodule, max.			1 024 byte
PROFINET CBA
в—Џ acyclic transmission			Yes
в—Џ cyclic transmission			Yes
Open IE communication
в—Џ Number of connections, max.			94
в—Џ Local port numbers used at the system end			0, 20, 21, 25, 80, 102, 135, 161, 34962, 34963, 34964, 65532, 65533, 65534, 65535
в—Џ Keep-alive function, supported			Yes
3. Interface
Interface type		Pluggable interface module (IF), technical data as for 2nd interface	Pluggable interface module (IF)
Plug-in interface modules		IF 964-DP (MLFB: 6ES7964-2AA04-0AB0)	IF 964-DP (MLFB: 6ES7964-2AA04-0AB0)
Physics		RS 485 / PROFIBUS	RS 485 / PROFIBUS
Isolated		Yes	Yes
Power supply to interface (15 to 30 V DC), max.		150 mA	150 mA
automatic detection of transmission rate		No	No
Number of connection resources		32	32
Functionality
в—Џ MPI		No	No
в—Џ PROFIBUS DP master		Yes	Yes
в—Џ PROFIBUS DP slave		Yes	Yes
DP master
в—Џ Number of connections, max.		32	32
в—Џ Number of DP slaves, max.		125	125
Services
вЂ” PG/OP communication		Yes	Yes
вЂ” Routing		Yes; S7 routing	Yes; S7 routing
вЂ” Global data communication		No	No
вЂ” S7 basic communication		Yes	Yes
вЂ” S7 communication		Yes	Yes
вЂ” S7 communication, as client		Yes	Yes
вЂ” S7 communication, as server		Yes	Yes
вЂ” Equidistance		Yes	Yes
вЂ” Isochronous mode		Yes	Yes
вЂ” SYNC/FREEZE		Yes	Yes
вЂ” Activation/deactivation of DP slaves		Yes	Yes
вЂ” Direct data exchange (slave-to-slave communication)		Yes	Yes
вЂ” DPV0		Yes	Yes
вЂ” DPV1		Yes	Yes
Address area
вЂ” Inputs, max.		8 kbyte	8 kbyte
вЂ” Outputs, max.		8 kbyte	8 kbyte
User data per DP slave
вЂ” User data per DP slave, max.		244 byte	244 byte
вЂ” Inputs, max.		244 byte	244 byte
вЂ” Outputs, max.		244 byte	244 byte
вЂ” Slots, max.		244	244
вЂ” per slot, max.		128 byte	128 byte
DP slave
в—Џ Number of connections		32	32
в—Џ GSD file		http://support.automation.siemens.com/WW/view/en/113652	http://support.automation.siemens.com/WW/view/en/113652
в—Џ Transmission rate, max.		12 Mbit/s	12 Mbit/s
в—Џ automatic baud rate search		No	No
в—Џ Address area, max.		32	32; Virtual slots
в—Џ User data per address area, max.		32 byte	32 byte
вЂ” of which consistent, max.		32 byte	32 byte
Services
вЂ” PG/OP communication		Yes	Yes
вЂ” S7 routing		Yes; with interface active	Yes; with interface active
вЂ” Global data communication		No	No
вЂ” S7 basic communication		No	No
вЂ” S7 communication		Yes	Yes
вЂ” S7 communication, as client		Yes	Yes
вЂ” S7 communication, as server		Yes	Yes
вЂ” Direct data exchange (slave-to-slave communication)		No	No
вЂ” DPV1		No	No
Transfer memory
вЂ” Inputs		244 byte	244 byte
вЂ” Outputs		244 byte	244 byte
Open IE communication
в—Џ TCP/IP			Yes; via integrated PROFINET interface and loadable FBs
вЂ” Data length, max.			32 kbyte
вЂ” several passive connections per port, supported			Yes
в—Џ ISO-on-TCP (RFC1006)	Via CP 443-1 and loadable FB	Via CP 443-1 and loadable FB	Yes; Via integrated PROFINET interface or CP 443-1 and loadable FBs
вЂ” Data length, max.	1452 bytes via CP 443-1 Adv.	1452 bytes via CP 443-1 Adv.	32 kbyte; 1452 bytes via CP 443-1 Adv.
в—Џ UDP			Yes; via integrated PROFINET interface and loadable FBs
вЂ” Data length, max.			1 472 byte
Web server
в—Џ User-defined websites			Yes
в—Џ Number of HTTP clients			5
Isochronous mode
Isochronous operation (application synchronized up to terminal)	Yes; For PROFIBUS only	Yes; For PROFIBUS only	Yes; Via PROFIBUS DP or PROFINET interface
Equidistance	Yes	Yes	Yes
Number of DP masters with isochronous mode	2	3	2
User data per isochronous slave, max.	244 byte	244 byte	244 byte
shortest clock pulse	1 ms; 0.5 ms without use of SFC 126, 127	1 ms; 0.5 ms without use of SFC 126, 127	1 ms; 0.5 ms without use of SFC 126, 127
max. cycle	32 ms	32 ms	32 ms
Communication functions
PG/OP communication	Yes	Yes	Yes
в—Џ Number of connectable OPs without message processing	95	95	95
в—Џ Number of connectable OPs with message processing	95; When using Alarm_S/SQ and Alarm_D/DQ	95; When using Alarm_S/SQ and Alarm_D/DQ	95; When using Alarm_S/SQ and Alarm_D/DQ
Data record routing	Yes	Yes	Yes
Global data communication
в—Џ supported	Yes	Yes	Yes
в—Џ Number of GD loops, max.	16	16	16
в—Џ Number of GD packets, transmitter, max.	16	16	16
в—Џ Number of GD packets, receiver, max.	32	32	32
в—Џ Size of GD packets, max.	54 byte	54 byte	54 byte
в—Џ Size of GD packet (of which consistent), max.	1 variable	1 variable	1 variable
S7 basic communication
в—Џ supported	Yes	Yes	Yes
в—Џ User data per job, max.	76 byte	76 byte	76 byte
в—Џ User data per job (of which consistent), max.	1 variable	1 variable	1 variable
S7 communication
в—Џ supported	Yes	Yes	Yes
в—Џ as server	Yes	Yes	Yes
в—Џ as client	Yes	Yes	Yes
в—Џ User data per job, max.	64 kbyte	64 kbyte	64 kbyte
в—Џ User data per job (of which consistent), max.	462 byte; 1 variable	462 byte; 1 variable	462 byte; 1 variable
S5 compatible communication
в—Џ supported	Yes; Via FC AG_SEND and AG_RECV, max. via 10 CP 443-1 or 443-5	Yes; Via FC AG_SEND and AG_RECV, max. via 10 CP 443-1 or 443-5	Yes; Via FC AG_SEND and AG_RECV, max. via 10 CP 443-1 or 443-5
в—Џ User data per job, max.	8 kbyte	8 kbyte	8 kbyte
в—Џ User data per job (of which consistent), max.	240 byte	240 byte	240 byte
в—Џ Number of simultaneous AG-SEND/AG-RECV orders per CPU, max.	64/64	64/64	64/64
Standard communication (FMS)
в—Џ supported	Yes; Via CP and loadable FB	Yes; Via CP and loadable FB	Yes; Via CP and loadable FB
Web server
в—Џ supported	No	No	Yes
PROFINET CBA (at set setpoint communication load)
в—Џ Setpoint for the CPU communication load			20 %
в—Џ Number of remote interconnection partners			32
в—Џ Number of functions, master/slave			150
в—Џ Total of all master/slave connections			6 000
в—Џ Data length of all incoming connections master/slave, max.			65 000 byte
в—Џ Data length of all outgoing connections master/slave, max.			65 000 byte
в—Џ Number of device-internal and PROFIBUS interconnections			1 000
в—Џ Data length of device-internal und PROFIBUS interconnections, max.			16 000 byte
в—Џ Data length per connection, max.			2 000 byte
Remote interconnections with acyclic transmission
вЂ” Sampling frequency: Sampling time, min.			200 ms; Depending on preset communication load, number of interconnections and data length used
вЂ” Number of incoming interconnections			500
вЂ” Number of outgoing interconnections			500
вЂ” Data length of all incoming interconnections, max.			16 000 byte
вЂ” Data length of all outgoing interconnections, max.			16 000 byte
вЂ” Data length per connection, max.			2 000 byte
Remote interconnections with cyclic transmission
вЂ” Transmission frequency: Transmission interval, min.			1 ms; Depending on preset communication load, number of interconnections and data length used
вЂ” Number of incoming interconnections			300
вЂ” Number of outgoing interconnections			300
вЂ” Data length of all incoming interconnections, max.			4 800 byte
вЂ” Data length of all outgoing interconnections, max.			4 800 byte
вЂ” Data length per connection, max.			450 byte
HMI variables via PROFINET (acyclic)
вЂ” Number of stations that can log on for HMI variables (PN OPC/iMap)			2x PN OPC/1x iMap
вЂ” HMI variable updating			500 ms
вЂ” Number of HMI variables			1 500
вЂ” Data length of all HMI variables, max.			48 000 byte
PROFIBUS proxy functionality
вЂ” supported			Yes; 32 PROFIBUS slaves max. connectable
вЂ” Data length per connection, max.			240 byte; Slave-dependent
Number of connections
в—Џ overall	96	96	96
в—Џ usable for PG communication	95	95	95
вЂ” reserved for PG communication	1	1	1
вЂ” adjustable for PG communication, max.	0	0	0
в—Џ usable for OP communication	95	95	95
вЂ” reserved for OP communication	1	1	1
вЂ” adjustable for OP communication, max.	0	0	0
в—Џ usable for S7 basic communication	94	94	94
вЂ” reserved for S7 basic communication	0	0	0
вЂ” adjustable for S7 basic communication, max.	0	0	0
в—Џ usable for S7 communication	94	94	94
вЂ” reserved for S7 communication	0	0	0
вЂ” adjustable for S7 communication, max.	0	0	0
в—Џ usable for routing	47	47	47
вЂ” reserved for routing	0	0	0
вЂ” adjustable for routing, max.	0	0	0
S7 message functions
Number of login stations for message functions, max.	95; Max. 95 with Alarm_S/SQ and Alarm_D/DQ (OPs); max. 16 with Alarm, Alarm_8, Alarm_8P, Notify and Notify_8 (e.g. WinCC)	95; Max. 95 with Alarm_S/SQ and Alarm_D/DQ (OPs); max. 16 with Alarm, Alarm_8, Alarm_8P, Notify and Notify_8 (e.g. WinCC)	95; Max. 95 with Alarm_S/SQ and Alarm_D/DQ (OPs); max. 16 with Alarm, Alarm_8, Alarm_8P, Notify and Notify_8 (e.g. WinCC)
Symbol-related messages	Yes	Yes	Yes
SCAN procedure	Yes	Yes	Yes
Program alarms	Yes	Yes	Yes
Process diagnostic messages	Yes	Yes	Yes
simultaneously active Alarm-S blocks, max.	1 000; Simultaneously active alarm_S/SQ blocks or alarm_D/DQ blocks	1 000; Simultaneously active alarm_S/SQ blocks or alarm_D/DQ blocks	1 000; Simultaneously active alarm_S/SQ blocks or alarm_D/DQ blocks
Alarm 8-blocks	Yes	Yes	Yes
в—Џ Number of instances for alarm 8 and S7 communication blocks, max.	4 000	4 000	4 000
в—Џ preset, max.	600	600	600
Process control messages	Yes	Yes	Yes
Number of archives that can log on simultaneously (SFB 37 AR_SEND)	32	32	32
Number of messages
в—Џ overall, max.	1 024	1 024	1 024
в—Џ in 100 ms grid, max.	128	128	128
в—Џ in 500 ms grid, max.	512	512	512
в—Џ in 1000 ms grid, max.	1 024	1 024	1 024
Number of additional values
в—Џ with 100 ms grid, max.	1	1	1
в—Џ with 500, 1000 ms grid, max.	10	10	10
Test commissioning functions
Status block	Yes; Up to 16 simultaneously	Yes; Up to 16 simultaneously	Yes; Up to 16 simultaneously
Single step	Yes	Yes	Yes
Number of breakpoints	16	16	16
Status/control
в—Џ Status/control variable	Yes; Up to 16 variable tables	Yes; Up to 16 variable tables	Yes; Up to 16 variable tables
в—Џ Variables	Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters	Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters	Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters
в—Џ Number of variables, max.	70; Status/control	70; Status/control	70; Status/control
Forcing
в—Џ Forcing	Yes	Yes	Yes
в—Џ Forcing, variables	Inputs, outputs, bit memories, peripheral inputs, peripheral outputs	Inputs, outputs, bit memories, peripheral inputs, peripheral outputs	Inputs/outputs, bit memories, distributed I/Os
в—Џ Number of variables, max.	512	512	512
Diagnostic buffer
в—Џ present	Yes	Yes	Yes
в—Џ Number of entries, max.	3 200	3 200	3 200
вЂ” adjustable	Yes	Yes	Yes
вЂ” preset	120	120	120
Service data
в—Џ can be read out	Yes	Yes	Yes
Standards, approvals, certificates
CE mark	Yes	Yes	Yes
CSA approval	Yes	Yes	Yes
UL approval	Yes	Yes	Yes
cULus	Yes	Yes	Yes
FM approval	Yes	Yes	Yes
RCM (formerly C-TICK)	Yes	Yes	Yes
KC approval	Yes	Yes	Yes
EAC (formerly Gost-R)	Yes	Yes	Yes
Use in hazardous areas
в—Џ ATEX	ATEX II 3G Ex nA IIC T4 Gc	ATEX II 3G Ex nA IIC T4 Gc	ATEX II 3G Ex nA IIC T4 Gc
Ambient conditions
Ambient temperature during operation
в—Џ min.	0 °C	0 °C	0 °C
в—Џ max.	60 °C	60 °C	60 °C
Configuration
Configuration software
в—Џ STEP 7	Yes	Yes	Yes
Programming
в—Џ Command set	see instruction list	see instruction list	see instruction list
в—Џ Nesting levels	7	7	7
в—Џ Access to consistent data in process image	Yes	Yes	Yes
в—Џ System functions (SFC)	see instruction list	see instruction list	see instruction list
в—Џ System function blocks (SFB)	see instruction list	see instruction list	see instruction list
Programming language
вЂ” LAD	Yes	Yes	Yes
вЂ” FBD	Yes	Yes	Yes
вЂ” STL	Yes	Yes	Yes
вЂ” SCL	Yes	Yes	Yes
вЂ” CFC	Yes	Yes	Yes
вЂ” GRAPH	Yes	Yes	Yes
вЂ” HiGraph®	Yes	Yes	Yes
Number of simultaneously active SFCs
вЂ” DPSYC_FR	2; SFC 11; per interface	2; SFC 11; per interface	2; SFC 11; per interface
вЂ” D_ACT_DP	8; SFC 12; per interface	8; SFC 12; per interface	8; SFC 12; per interface
вЂ” RD_REC	8; SFC 59; per interface	8; SFC 59; per interface	8; SFC 59; per interface
вЂ” WR_REC	8; SFC 58; per interface	8; SFC 58; per interface	8; SFC 58; per interface
вЂ” WR_PARM	8; SFC 55; per interface	8; SFC 55; per interface	8; SFC 55; per interface
вЂ” PARM_MOD	1; SFC 57; per interface	1; SFC 57; per interface	1; SFC 57; per interface
вЂ” WR_DPARM	2; SFC 56; per interface	2; SFC 56; per interface	2; SFC 56; per interface
вЂ” DPNRM_DG	8; SFC 13; per interface	8; SFC 13; per interface	8; SFC 13; per interface
вЂ” RDSYSST	8; SFC 51	8; SFC 51	8; SFC 51
вЂ” DP_TOPOL	1; SFC 103; per interface	1; SFC 103; per interface	1; SFC 103; per interface
Number of simultaneously active SFBs
вЂ” RDREC	8; SFB 52; per interface, but not more than 32 across all external interfaces	8; SFB 52; per interface, but not more than 32 across all external interfaces	8; SFB 52; per interface, but not more than 32 across all external interfaces
вЂ” WRREC	8; SFB 53; per interface, but not more than 32 across all external interfaces	8; SFB 53; per interface, but not more than 32 across all external interfaces	8; SFB 53; per interface, but not more than 32 across all external interfaces
Know-how protection
в—Џ User program protection/password protection	Yes	Yes	Yes
в—Џ Block encryption	Yes; With S7 block Privacy	Yes; With S7 block Privacy	Yes; With S7 block Privacy
Dimensions
Width	25 mm	50 mm	50 mm
Height	290 mm	290 mm	290 mm
Depth	219 mm	219 mm	219 mm
Weights
Weight, approx.	700 g	900 g	900 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания