Design Attributes

Display size and Type

Diagonal, Digital Colour LCD (TFT) with Touch Screen Industrial grade with brightness adjustment and wide viewing angle

• SIREC D300

5.7" (14.5 cm) diagonal, color

• SIREC D400

12.1" (30.7 cm) diagonal, color

Resolution

• SIREC D300

VGA (640 x 480 pixels)

• SIREC D400

XVGA (1024 x 768 pixels)

Screen Saver

Set in minutes from 1 вЂ¦ 720, can be set to dim the screen or to switch off

Brightness adjustment

Adjustable between 10 and 100 %,
default set to 80 % brightness.

Backlight life time

• SIREC D300

55 000 hours to half brightness when used at 100 % (86 000 h if used at 80 %),
maximum luminosity 400 cd/mІ

• SIREC D400

43 000 hours to half brightness when used at 100 % (67 000 h if used at 80 %),
maximum luminosity 400 cd/mІ

Display Update Rate

Display values updated every second

Status Display

A status bar, at the top of the recorder’s screen, displays the real-time icons of the recorder status, such as Recording Time left and alarm active

Communications

Ethernet 10/100 base -T with RJ45 connector supporting Modbus/TCP, FTP, Internet, DHCP or fixed IP address.
RS485 Modbus RTU (up to 115200 Baud Rate)

Mathematics

Basic Maths include Add, Subtract, Multiply, Divide, Modulo and power. Full Maths and Scripting (option) support up to 100 character free form math expression for each pen. For example SINE, COS, TAN, Log, Parenthesis (eg. A1 + A2), comm variables, free memory, and access to any data item variable (A1, P1, D1 etc.).

Front and Rear USB Ports

USB host ports front and rear for data and setup transfers through these ports. External devices (keyboard or mouse), Barcode reader, or external mass storage device. (USB 1.1 compliant)

Standard Screens and Custom Screens

Fully programmable display values in engineering units. Time & date stamp on every division.

Sets of Standard screens are available to display data on a chart, digital reading, bargraphs or numerous combinations thereof. Screen properties can be modified on the recorder and customised to suit. Custom screens created in the Screen Designer software can be imported into the recorder for specialist applications. Custom Screen firmware option is required.

Digital values displayed include

• Alarms on bars
• Engineering units
• Pen name
• Measuring point number
• Tag, time and date
• 20 character description
• Totalised values

Data Storage

• Removable Media

SD card, supports up to 32 GByte

• Local Mass Storage Options

• USB memory key - must be formatted
• USB hard drive - up to 120 GByte

• Internal Data Buffer

Non-volatile, 256 GByte (56 million acquisition values) upwards to 3.7 GByte (4 800 Million points)

• Setup and screens

Stored internally on non-volatile memory

• Manual Saving

Data saving by inserting compact flash card or USB memory stick

• Data Saving Period

Related to log rate, number of pens, totals and alarms.

Each pen is capable of its own independent storage rate (20 ms вЂ¦ 60 h)

• Data Format

Binary encoded format

• Recycling Mode

Internal memory has FIFO (First In First Out) capability where the newest data over-writes the oldest data

Power Requirements

• Voltage (VRMS)

100 V AC … 250 V AC (auto select)

• Frequency

50/60 Hz

• Power Consumption

• SIREC D300

< 40 W

• SIREC D400

< 60 W

• Optional instrument power Voltage

• SIREC D300

12 вЂ¦ 30 V DC/12 вЂ¦ 20 V AC
Power Consumption: < 40 W

• SIREC D400

20 вЂ¦ 55 V DC/20 вЂ¦ 30 V AC
Power Consumption: < 60 W

Common Relay Output (SPNC)

• NC common alarm relay

2 contacts, normally open when the recorder is powered (no active alarms), rating 24 V, 1 A

Battery

Battery backed up for clock, Lithium battery Type 6032, 3.0 V – 10 years life (Recorder powered), 1 year life, typical (Recorder unpowered)

Password Protection

Multiple Administrator control of password setup and management with 4 levels of password protection for – Engineer, Supervisor, Technician, and Operator.

Up to 50 different users are available.
Password protection restricts user entry to the recorder set up and specific screens.

• Engineer

Highest access to all levels, Supervisor, Technician and Operator

• Supervisor

2nd highest level including Technician and Operator access

• Technician

3rd level including Operator access

• Operator

4th and lowest level of access

Languages

• English UK & US
• French
• German
• Italian
• Spanish
• Brazilian
• Polish
• Hungarian
• Slovakian
• Czech
• Turkish
• Romanian
• Russian
• Greek
• Portuguese
• Bulgarian
• Chinese
• Japanese
• Korean

Temperature Units

°C, °F oder K (Kelvin)

Recorder Identification

Status bar: Alternately displays Recorder ID and Recorder Screen Name. Displays Time and Date.

Clock

Accuracy: ± 29 ppm (± 1 minute/month) at 25°C.

Summer/Winter manual or automatic time adjustment or via communications. SNTP Client and/or Server included for synchronising over Ethernet.

Alarm Set Points

6 per pen integral "soft" alarm set points easily set by user to announce selected out of limit conditions; user can select if an alarm triggers a change in the screen background colour

• Alarm triggers

Alarm triggers can be set for Hi, Lo, Deviation (latched or unlatched) for alarm acknowledgement

• Alarm Damping

1 s … 24 h

• Hysteresis

± 100 % of pen scale

• Common relay output

1 A , 24 V; can be activated on any alarm

Data Replay Mode

Data replay facility on chart displays at normal, fast or slow speeds with zoom and cursor

Display Chart Speeds

• Chart rates

• 1 mm/h
• 5 mm/h
• 10 mm/h
• 20 mm/h
• 30 mm/h
• 60 mm/h
• 120 mm/h
• 600 mm/h
• 1200 mm/h
• 6000 mm/h

Combinations of rates can be mixed and chart speeds can be set independently for each chart. Display speeds are independent of logging rate.

Messages Screen

The message screen displays system information and records any setup activity that has been changed. It also provides warning and error message updates, lists alarm activity and will display user defined marks on a chart.

CE Conformity (CE Mark)

This product conforms with the protection requirements of 2014/35/EC, the Low Voltage Directive, and
2014/30/EC, the EMC Directive.

Conformity of this product with any other "CE Mark" Directive(s) shall not be assumed.

Immunity Product Classification

Complies with EN 61326‑1:2013 Class I:
Cord Connected, Panel Mounted Industrial Control Equipment with protective earthing (grounding), EN 61010‑1:2010

Enclosure Rating

Front panel designed to NEMA3/IP54 (Optional NEMA 4X/IP66)

Installation Requirements

Category II: Overvoltage (EN 61010‑1:2010)
Pollution Degree 2

EMC Standards

Emissions - EN 61326‑1:2013 Class B
Immunity - EN 61326‑1:2013 Industrial Levels

Safety

Complies with EN 61010-1: 2010
Panel Mounted Equipment, Terminals must be enclosed within the panel

Analog Inputs

Number of Inputs

• SIREC D300

4, 6, 8, 12 or 16 input channels

• SIREC D400

4, 6, 8, 12, 16, 24, 32, 40 or 48 input channels

Input Types

mV, V, mA with external shunt (provided as standard), Thermocouple, RTD and ohms

Minimum Input Span

Range is fully configurable with span limitation of the operating range selected with 4 % under range to 4 % over-range capability (50 V Range 2 %)

Burnout (T/C)

Active (High or Low), Passive and Health watch/maintenance (option).

Cold Junction Compensation

Internal compensation with the ability to manually adjust values, External Input for compensation, External CJC value specified

Input Resolution

0.0015 % (16 Bit ADC)

Input Impedance

• Current loop resistance

10 О©, use ± 0.1 % external resistor,
Volts > 1 MО©, all other > 10 MО©

Source Impedance

• T/C and RTD

100 О© per lead maximum (Cu10 = 15 О©)

Square Root Extraction

Available as standard on every input type

Sensor Compensation

Single point and Dual point

Input Sampling Rate

• SIREC D300

Recorder has 2 available slots with up to 8 analog inputs each; the input sampling rate is dependent on actuation type

• SIREC D400

Recorder has 6 available slots with up to 8 analog inputs each; the input sampling rate is dependent on actuation type

• All Inputs

100 ms (10 Hz), 200 ms (5 Hz), 500 ms (2 Hz)

• Fast Sampling

20 ms (50 Hz) - mA, mV, Volts and Ohms only

Linear Scales

• Normal and Scientific notation
• Decimal Point automatic or programmable
• Engineering units, user definable (10 characters)

Logarithmic Scales

Logarithmic Decade limits: -38 min, to +38 max, (recommend up to 20 decades on one screen to ensure clarity)

Input Isolation

300 V AC channel-to-channel,
channel-to-ground

Noise Rejection

At 50/60Hz ± 2 %

• Common mode

2 Hz = -120 dB, 5 Hz = -120 dB,
10 Hz = -120 dB

• Normal Mode

2 Hz = -85 dB, 5 Hz = -80 dB,
10 Hz = -48 dB

Input Actuation (Linear)

Range

• mV (DC)

-1000 … +1000

• V (DC)

-50 … +50

• mA

4 … 20, 0 … 20

• 200 О©

0 … 200

• 500 О©

0 … 500

• 1000 О©

0 … 1000

• 4000 О©

0 … 4000

Thermocouples

Temperatur range

• B

260 ... 538 °C (500 ... 1000 °F)

538 ... 1816 °C (1000 ... 3300 °F)

• E

-270 ... -200 °C (-454 ... -328 °F)

-200 ... -70 °C (-328 ... -94 °F)

-70 ... +1000 °C (-94 ... +1832 °F)

• J

-210 ... 0 °C (-346 ... 32 °F)

0 ... 1200 °C (32 ... 2192 °F)

• K

-270 ... -70 °C (-454 ... -94 °F)

-70 ... +1372 °C (-94 ... +2502 °F)

• R

-50 ... 260 °C (-58 ... 500 °F)

260 ... 1768 °C (500 ... 3214 °F)

• S

-50 ... +260 °C (-58 ... +500 °F)

260 ... 1768 °C (500 ... 3214 °F)

• T

-270 ... -210 °C (-454 ... -346 °F)

-210 ... +400 °C (-346 ... +752 °F)

• L

-200 ... 0 °C (-328 ... +32 °F)

0 ... 900 °C (32 ... 1652 °F)

• G (W_W26)

0 ... 100 °C (32 ... 212 °F)

100 ... 316 °C (212 ... 601 °F)

316 ... 2315 °C (601 ... 4199 °F)

• C (W5, W26)

0 ... 180 °C (32 ... 356 °F)

180 ... 1220 °C (356 ... 2228 °F)

1220 ... 2315 °C (2228 ... 4199 °F)

• M (NiMo-NiCo) (NNM90)

-50 ... +370 °C (-58 ... +698 °F)

370 ... 1410 °C (698 ... 2570 °F)

• N (Nicosil Nisil)

-200 ... +100 °C (-328 ... +212 °F)

100 ... 1300 °C (212 ... 2372 °F)

• Chromel/Copel

-50 ... +600 °C (-58 ... +1112 °F)

• P (Platinel)

0 ... 1390 °C (32 ... 2534 °F)

• D

0 ... 180 °C (32 ... 356 °F)

180 ... 1840 °C (356 ... 3344  °F)

1840 ... 2490 °C (3344 ... 4515  °F)

Resistance thermometers

Temperatur range

• Pt100 О± = 0,00385

-200 ... +850 °C (-328 ... +1562 °F)

• Pt 200

-200 ... +850 °C (-328 ... +1562 °F)

• Pt 500

-200 ... +850 °C (-328 ... +1562 °F)

• Pt 1000

-200 ... +850 °C (-328 ... +1562 °F)

• Nickel, 100 О©

-60 ... +180 °C (-76 ... +356 °F)

• Nickel, 120 О©

-80 ... +260 °C (-112 ... +500 °F)

• Cu10

-200 ... +260 °C (-328 ... +500 °F)

• Cu53

0 ... 150 °C (32 ... 302 °F)

Logging

Logging Method

Sample, Average, Min/Max - can be set independently per pen

Logging Types

Continuous, Fuzzy

Logging Rate

From 200 ms … 60 h per Pen

Fuzzy Logging

A secure data storage technique which delivers data compression ratio of 100:1 or more; self teaching, storing the data at a variable rate to match the process

Mechanical Design

Enclosure/Bezel

Zinc plated steel case with high impact resistant polycarbonate bezel; scratch resistant lens

• Enclosure Rating

• NEMA 3/IP54 protection rating standard
• Optional NEMA 4X/IP66
  (front face only)

• Colour

Bezel: Grey

Mounting Panel

Unlimited mounting angle

For the best view of the display the viewing angle should not exceed:

SIREC D300

• 55° from the left or right,
• 40° looking down and
• 50° looking up at the recorder display.

SIREC D400

• 70° from the left or right,
• 45° looking down and
• 55° looking up at the recorder display.

Mounting adjustable for panel thickness of 2 mm вЂ¦ 20 mm. Adapter kits available for covering existing panel cutouts.

Dimensions (W x H x D) in mm

Additional 80 mm (3.15") clearance recommended for a straight type power cable and signal connectors

• SIREC D300

144 x 144 x 200 (5.67 x 5.67 x 7.87")

• SIREC D400

300 x 300 x 247 (11.81 x 11.81 x 9.72")

Cutout (W x H) in mm

• SIREC D300

138 x 138 mm (5.43 x 5.43")

• SIREC D400

281 x 281 mm (11.06 x 11.06")

Weight

• SIREC D300

Max. 3.5 kg (7.7 lb)

• SIREC D400

Max. 10 kg (22 lb)

Wiring Connections

IEC power plug. Removable terminal strip for input and alarm connections

Environmental and Operating Conditions

Ambient Temperature

0 °C вЂ¦ 50 °C (32 °F ... 122 °F)

Relative Humidity (%RH)

10 ... 90

Vibration

• Frequency (Hz)

0 ... 70

• Acceleration (g)

0.1

Mechanical Shock

• Acceleration (g)

1

• Duration (ms)

30

Mounting Position from Vertical

• Tilted Forward

40°

• Tilted Backward

65°

• Tilted to Side (±)

65°

Power Requirements

• Mains Voltage (Vrms)

100 вЂ¦ 250

• Low Voltage AC (Vrms)

20 вЂ¦ 30

• DC Voltages

20 вЂ¦ 55

• Frequency (Hz)

47 вЂ¦ 63

Power Consumption

• SIREC D300

AC: < 40 W (max),
DC: < 40 W (max). Typical 20 W

• SIREC D400

AC: < 60 W (max),
DC: < 60 W (max) . Typical 30 W

Warm Up

30 minutes minimum

Seismic Qualification

Complies with IEEE 323-1974 and/or 1983 and IEEE 344-1975 and/or 1987 (optional)

Options

Pulse Input

• Quantity

4 isolated inputs per board

• Frequency

1 Hz … 25 kHz, updated once per second

• Input

Low < 1V, High > 4 V … < 50 V or
Volt free input: Low = short circuit, High = open circuit.

Alarm Outputs

Programmable alarm set points (6 per pen) can be configured to activate up to 16 (SIREC D300) respectively 48 outputs (SIREC D400)

• Update rate

200 ms for all alarms

• Number/Type

• 4 or 8 relay contacts SPDT,
  3 A 240 V AC, 3 A 24 V AC/DC, 0.2A 240 V DC (non-inductive, internally suppressed)
• 8 I/O or 16 I/O - SPNO,
  1 A 24 V DC (non-inductive, internally suppressed)

• Activation

Fully programmable internal alarm levels. Assignable to any relay output

Digital Input/Output

• Quantity

• 8 I/O or 16 I/O

All channels may be selected freely as either digital inputs or outputs. The Digital I/O card also has 4 channels that can be set as pulse inputs (channels 1 вЂ¦ 4). The operating frequency for pulse inputs on the Digital I/O card is 1kHz max.

• Relay Outputs

• 4 relay outputs

All four channels are relay outputs only

• Relays/DI card

• 8 relays/ 2 DI card

2 outputs can be configured for use as digital inputs: A digital input is provided by a volt free contact between the normally open (NO) and the common (C) terminals of an output relay. If the 2 Digital inputs are used only 6 relay outputs are available. Closed < 500 О©, Open > 300 kО©.

Custom Screens

Provides the capability in the recorder to accept custom screen designs from the Screen Designer.

E-mail

Setup email accounts to send the following:
When an Alarm is triggered or an Email can be sent as a part of an Event occurring, such as: Alarms - In/Out/Ack, Totaliser – Start, Stop or Reset, Digital Inputs – On, Off or State change, TC Burnout – on a specific Analog Input channel, Scheduled Events – Once, Interval, Specific days, Month End

Event marker

User defined process events are recorded and can be set to cause particular recorder actions. Events can consist of recording start/stop, digital inputs, alarms, totalising actions, timers, barcode, etc. Once an event has been caused it can produce a definable set of effects on the recorder which can include, mark on chart, relay outputs, recording control, acknowledge alarm, trigger an Event, set/clear Relay, Screen change, E-mail a message and Reset max/mins. Each event marker can be recorded for analysis using the SIREC D application software.

Analog Outputs
(Re-transmission Outputs)

Re-transmission outputs available; a pen drives each output. Analog inputs, totalised values or any mathematical result can be re-transmitted.

• Quantity

• SIREC D300

2 or 4 re-transmission outputs

• SIREC D400

2, 4, 6 or 8 re-transmission outputs

• Update Rate

250 ms all channels

• Accuracy

± 0.1 % (0 … 500 О© load),
± 0.25 % (500 О©, 1 kО© load)

• Type

0 … 20 mA, 4 … 20 mA

• Maximum Load Resistance

1 kО©

• Resolution

0,002 %

• Isolation

300 V AC

Health Watch/Maintenance Capability

The recorder keeps track of important "life actions" for improved diagnostics and preventative maintenance notification.

Including

• Powered On
• Last powered On
• Time On since power up
• Total On time
• Total Off time
• Longest Off time
• Hardware/Firmware updates
• Lithium cell life
• Backlight life left at 100 % brightness
• SD card insertions
• Hi/Lo CJC value (Hi & Lo temps)
• Analog In last factory/user calibration
• Relay operations

Transmitter Power (optional)

• SIREC D300

200 mA at 24 V DC ± 3 V DC

• SIREC D400

1 A at 24 V DC ± 3 V DC

Extended Security System (ESS)

Provides full support for 21 CFR Part 11.

Includes features for entry of unique User ID’s and associated passwords:

• Timeout on inactivity (1 … 10 min)
• Password expiration (1 … 365 days)
• Up to 50 users
• Password re-entry lock out for incorrect entry of password more than 3 times, no re-use of passwords (programmable 4 … 12 times)
• Traceability by user name

Totaliser/Sterilisation

One totaliser per input. Totaliser value must be assigned to a pen for display and storage.

Multiple totalisations (Maths option) are possible with the use of extra pens (option). Reset may be manual or programmed. Totalisation values are 10 digits plus exponent.

Each pen can be totalised according to the Fo or Po sterilisation function at 121.11°C (250 °F).

The Standard Reference Temperature and Thermal Resistance (Z Value) are fully adjustable values of X, Y, W and V. Start temp, Reference temp and Z factor are all user defined, allowing support for many different types of sterilisation applications.

Specification table for Sterilisation

The definition of Fo/Po is the sterilisation/pasteurisation time in minutes required to destroy a stated number of organisms with a known z at temperature T.

Batch

The Batch function allows the user to segment portions of data for further analysis.
Batch controls include:

• Start
• Stop
• Pause
• For viewing
• Resume and abort

Print Support

Network printing from status, message and replay screens. Plus screen capture facility of process screens instantly using a basic USB standard PCL printer.

Math Algorithms

All analog input channels have a math expression block. This is a fully user programmable 100 character free form math expression for each pen. Math calculations available on all pens, one per input plus 16 extra pens for the SIREC D300 and 48 extra pens for the SIREC D400 recorder. Scripting maths includes conditions and multi-line scripting in pen maths expressions. Allow functions, permanent variables and constants, timers. 500 characters maximum per pen.

Miscellaneous

Optional customer ID Tagging (3 lines of up to 22 characters each line)

Full Maths

4

Full Math - this can handle math expressions that can consist of expressions up to 100 characters in length. (Note 1)

Full Maths with Scripting

6

A powerful multi-line scripting ability available to solve complex state based applications.
Eg.: "If .. X happens, then Y will happen, else.. Z will occur." (Note 1)

Events

6

Events are certain conditions or operations that can be set up and logged according to the time and date of an occurrence. Subsequently events can be reviewed or displayed on a graph.
Events can produce the following actions: Mark on Chart, start/stop Logging, Start/stop/reset Totalisers, Set/clear Relay (Digital), Acknowledge alarm, trigger an Event, Screen change, E-mail a message and Reset max/mins. (Note 3)

Fast Scanning mode

5

For fast processes, the scan rate and recording of the data can be set for up to 50 times per second (20 ms) for

• SIREC D300: up to 8 inputs
• SIREC D400: up to 16 inputs

Totalisers/ Sterilisation calculation

4

Each pen can be associated with a totaliser. Using extra pens, the totalised values can be displayed and recorded; multiple totals can be calculated out of the same variable (weekly, monthly, etc.). The totaliser function can handle Fo and Po sterilisation calculation. (Note 1)

Custom Screens

4

Import custom built screens that have been created in SIREC D-Designer. (Note 2)

Reports

3

Generate reports manually or using the event system to show daily/weekly/monthly Totals, Max/ Mins, Averages, Current Value. Messages, Message Lists - Alarm, System, Diagnostic, Security & User, Counters, Digital Inputs, and Digital Outputs. Reports can be printed, e-mailed as an attachment or exported to external media in RTF format.

AMS2750 Process

5

AMS2750 Process activates the Process Mode screen and the AMS2750 process configuration menus for furnaces and sensors in accordance with AMS2750 specification, including Thermocouple tracking.

Health Watch/ Maintenance

2

The recorder keeps track of important "life actions" for improved diagnostics and preventative mainte-nance notification. Including Powered On, Last powered On, Time On since power up, Total On time, Total Off time, Longest Off time, Lithium cell life, Backlight life left at 100 % brightness, Compact Flash insertions, Hi/Lo CJC value (Hi & Lo temps), Analog In last factory/user cal, Relay operations

Print Support

2

Enables the printer option to print text from various screens using a basic USB standard PCL printer.

Batch

5

The Batch function allows the user to segment portions of data for further analysis. Batch controls include Start, Stop, Pause, for viewing, Resume and Abort.

Modbus Master

10

Modbus master enables the recorder to communicate with up to 32 Slave devices on both Ethernet and RS485. The recorder itself can also act as a slave device while also being a master. RS485 is not available for SIREC D200.

Remote Viewer

3

Extends the user interface of the recorder onto the desktop PC. Providing full remote control of the unit launched from a web browser.

E-mail

3

Setup email accounts to send the following: When an Alarm is triggered or an Email can be sent as a part of an Event occurring, such as:
Alarms - In/Out/Ack, Totaliser – Start, Stop or Reset, Digital Inputs – On, Off or State change, TC Burnout – on a specific Analog Input channel, Scheduled Events – Once, Interval, Specific days, Month End.

Pwd Net Sync

5

Password Network Synchronisation. Password can be synchronised over the network, a recorder can be designated as a master of a password group and other recorders can be added to that group as slaves, the master will ensure all passwords are synchronised with all recorders in its group.

Secure WSD

3

Secure WSD is a web service that can run on devices and conforms to the Devices Profile for Web Services (DPWS). Recorder device will host web service and have server certificate installed on it. Desktop clients will have root authority certificate of server in trusted root certificates. Whenever client connects to WSD service SSL handshake will take place and on successful handshaking secure communication channel will be established and data flowing between these two end points will be encrypted.

Extra Pens (4)

2

4 extra pens to store and display totalised values, results of calculations, etc.

• SIREC D300: Maximum is up to 16 extra pens
• SIREC D400: Maximum is up to 48 extra pens

Hardware Lock

2

Uses the password permission areas to lock access to the hardware configuration functionality leaving some areas view only.