SIPLUS S7-300 SM 322 . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS S7-300 SM 322

| | | | | | |

Article number	6AG1322-1BF01-2XB0	6AG1322-8BF00-2AB0	6AG1322-1BH01-2AA0	6AG1322-1BL00-2AA0
	SIPLUS S7-300 SM322 8DO/24VDC 2A	SIPLUS SM322 8DA/24VDC	SIPLUS S7-300 SM322 16DA/24VDC 0.5A	SIPLUS S7-300 SM322 32DO/24VDC 0.5A
Supply voltage
Load voltage L+
в—Џ Rated value (DC)	24 V	24 V	24 V	24 V
в—Џ permissible range, lower limit (DC)	20.4 V	20.4 V	20.4 V	20.4 V
в—Џ permissible range, upper limit (DC)	28.8 V	28.8 V	28.8 V	28.8 V
Input current
from load voltage L+ (without load), max.	60 mA	90 mA	80 mA	160 mA
from backplane bus 5 V DC, max.	40 mA	70 mA	80 mA	110 mA
Power loss
Power loss, typ.	6.8 W	5 W	4.9 W	6.6 W
Digital outputs
Number of digital outputs	8	8	16	32
Limitation of inductive shutdown voltage to	L+ (-48 V)	L+ (-45 V)	L+ (-53 V)	L+ (-53 V)
Switching capacity of the outputs
в—Џ on lamp load, max.	10 W	5 W	5 W	5 W
Load resistance range
в—Џ lower limit	12 в„¦	48 в„¦	48 в„¦	48 в„¦
в—Џ upper limit	4 kв„¦	3 kв„¦	4 kв„¦	4 kв„¦
Output voltage
в—Џ for signal "1", min.	L+ (-0.8 V)	L+ (-0.8 to -1.6 V)	L+ (-0.8 V)	L+ (-0.8 V)
Output current
в—Џ for signal "1" rated value	2 A	0.5 A	0.5 A	0.5 A
в—Џ for signal "1" minimum load current	5 mA	10 mA	5 mA	5 mA
в—Џ for signal "0" residual current, max.	0.5 mA	0.5 mA	0.5 mA	0.5 mA
Switching frequency
в—Џ with resistive load, max.	100 Hz	100 Hz	100 Hz	100 Hz
в—Џ with inductive load, max.	0.5 Hz	2 Hz	0.5 Hz
в—Џ on lamp load, max.	10 Hz	10 Hz	10 Hz	10 Hz
Total current of the outputs (per group)
horizontal installation
вЂ” up to 40 °C, max.		4 A	4 A	4 A
вЂ” up to 60 °C, max.	4 A	3 A	3 A	3 A
вЂ” up to 70 °C, max.	4 A	2.5 A; (without diode) & 1.5 A (with diode)	3 A	2 A
vertical installation
вЂ” up to 40 °C, max.	4 A	4 A	2 A	2 A
Cable length
в—Џ shielded, max.	1 000 m	1 000 m	1 000 m	1 000 m
в—Џ unshielded, max.	600 m	600 m	600 m	600 m
Interrupts/diagnostics/status information
Diagnostic functions	No	Yes; Parameterizable	No	No
Alarms
в—Џ Diagnostic alarm	No	Yes; Parameterizable	No	No
Diagnostic messages
в—Џ Wire-break	No	Yes	No	No
в—Џ Short-circuit	No	Yes	No	No
в—Џ Fuse blown	No	No	No
в—Џ missing load voltage	No	Yes	No	No
Diagnostics indication LED
в—Џ Rated load voltage PWR (green)	No	No	No	No
в—Џ Fuse OK FSG (green)	No	No	No	No
в—Џ Group error SF (red)		Yes		No
в—Џ Status indicator digital output (green)	Yes; per channel	Yes; per channel	Yes	Yes; per channel
в—Џ Channel fault indicator F (red)		Yes		No
Potential separation
Potential separation digital outputs
в—Џ between the channels	Yes		Yes	Yes
в—Џ between the channels, in groups of	4	8	8	8
в—Џ between the channels and backplane bus	Yes; Optocoupler	Yes; Optocoupler	Yes; Optocoupler	Yes; Optocoupler
Permissible potential difference
between different circuits	75 V DC/60 V AC	75 V DC/60 V AC	75 V DC/60 V AC	75 V DC/60 V AC
Isolation
Isolation tested with	500 V DC	500 V DC	500 V DC	500 V DC
Standards, approvals, certificates
CE mark	Yes	Yes	Yes	Yes
UL approval	Yes; File E239877	Yes; File E239877	Yes; File E239877	Yes; File E239877
FM approval	Yes	Yes; CofC 3028431	Yes; CofC 3028431	Yes; CofC 3028431
RCM (formerly C-TICK)		Yes	Yes	Yes
KC approval		Yes	Yes	Yes
EAC (formerly Gost-R)		Yes	Yes	Yes
Railway application
в—Џ EN 50121-4	No
в—Џ EN 50155	No	Yes; Sections 4, 5 and 12; no further agreements apply; T1, Category 1, Class A/B	Yes; Sections 4, 5 and 12; no further agreements apply; T1, Category 1, Class A/B	Yes; Sections 4, 5 and 12; no further agreements apply; T1, Category 1, Class A/B
Ambient conditions
Ambient temperature during operation
в—Џ min.	-25 °C	-25 °C; = Tmin	-25 °C	-25 °C; = Tmin
в—Џ max.	70 °C; = Tmax; 60 °C @ UL/cUL use	70 °C; = Tmax; 60 °C @ UL/cUL use	70 °C; = Tmax; for use on railway vehicles according to EN50155, the rated temperature range -25 ... +55 °C (T1) or 60 °C @ UL/ULhaz/ATEX/FM use applies	70 °C; = Tmax; for use on railway vehicles according to EN50155, the rated temperature range -25 ... +55 °C (T1) or 60 °C @ UL/ULhaz/ATEX/FM use applies
Ambient temperature during storage/transportation
в—Џ min.	-40 °C		-40 °C	-40 °C
в—Џ max.	70 °C		70 °C	70 °C
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Connection method
required front connector	20-pin	20-pin	20-pin	40-pin
Dimensions
Width	40 mm	40 mm	40 mm	40 mm
Height	125 mm	125 mm	125 mm	125 mm
Depth	120 mm	120 mm	120 mm	120 mm
Weights
Weight, approx.	190 g	210 g	190 g	260 g

Article number	6AG1322-1CF00-7AA0	6AG1322-1HF10-2AA0	6AG1322-5HF00-4AB0	6AG1322-1FF01-7AA0
	SIPLUS SM322 8DA/48-125VDC	SIPLUS SM322 8DA - Relais	SIPLUS_SM322_8RO	SIPLUS S7-300 SM322 8DA/120/230VAC
Supply voltage
Load voltage L+
в—Џ Rated value (DC)	48 V; 48 V DC to 125 V DC	120 V	24 V
в—Џ permissible range, lower limit (DC)	40 V		24 V
в—Џ permissible range, upper limit (DC)	140 V		120 V
Load voltage L1
в—Џ Rated value (AC)		230 V	230 V	230 V; 120/230 V AC
в—Џ permissible range, lower limit (AC)				93 V
в—Џ permissible range, upper limit (AC)				264 V
Input current
from supply voltage L+, max.		125 mA	160 mA
from load voltage L+ (without load), max.	2 mA
from load voltage L1 (without load), max.				2 mA
from backplane bus 5 V DC, max.	100 mA	40 mA	100 mA	100 mA
Power loss
Power loss, typ.	7.2 W	4.2 W	3.5 W	8.6 W
Digital outputs
Number of digital outputs	8	8; Relays	8; Relays	8
Limitation of inductive shutdown voltage to	M (-1 V)
Switching capacity of the outputs
в—Џ on lamp load, max.	15 W; 15 W (48 V) or 40 W (125 V)	1 500 W; 230 V AC	1 500 W; 230 V AC	50 W
Output voltage
в—Џ for signal "1", min.	L+ (-1.2 V)			L1 (-1.5 V)
Output current
в—Џ for signal "1" rated value	1.5 A	5 A	5 A	2 A
в—Џ for signal "1" minimum load current	10 mA	5 mA	10 mA	10 mA
в—Џ for signal "1" permissible surge current, max.	3 A; for 10 ms			20 A; max. 1 AC cycle
в—Џ for signal "0" residual current, max.	0.5 mA			2 mA
Switching frequency
в—Џ with resistive load, max.	25 Hz	2 Hz	2 Hz	10 Hz
в—Џ with inductive load, max.	0.5 Hz	0.5 Hz	0.5 Hz	0.5 Hz
в—Џ on lamp load, max.	10 Hz	2 Hz	2 Hz	1 Hz
в—Џ mechanical, max.		10 Hz	10 Hz
Total current of the outputs (per group)
horizontal installation
вЂ” up to 40 °C, max.	6 A			4 A
вЂ” up to 60 °C, max.	3 A	5 A	5 A	2 A
вЂ” up to 70 °C, max.	1 A	5 A		1.5 A
vertical installation
вЂ” up to 40 °C, max.	4 A	5 A	5 A	2 A
Relay outputs
в—Џ Rated supply voltage of relay coil L+ (DC)		24 V
в—Џ Number of operating cycles, max.		300 000; 300000 (24 V DC, at 2 A); 200000 (120 V AC, at 3 A); 100000 (230 V AC, at 3 A)	100 000; 100000 (24 V DC, at 5 A), 100000 (230 V AC, at 5 A)
Switching capacity of contacts
вЂ” with inductive load, max.		3 A; 3 A (230 V DC), 2 A (24 V AC)	5 A; 5 A (230 V DC), 5 A (24 V AC)
вЂ” with resistive load, max.		8 A; 8 A (230 V DC), 5 A (24 V AC)	5 A; 5 A (230 V DC), 5 A (24 V AC)
Cable length
в—Џ shielded, max.	1 000 m	1 000 m	1 000 m	1 000 m
в—Џ unshielded, max.	600 m	600 m	600 m	600 m
Interrupts/diagnostics/status information
Diagnostic functions	No	No	Yes; Parameterizable	Yes; Fuse blown or load voltage missing
Alarms
в—Џ Diagnostic alarm	No	No	Yes; Parameterizable	No
Diagnostic messages
в—Џ Wire-break	No	No		No
в—Џ Short-circuit	No	No		No
в—Џ Fuse blown	No	No		Yes
в—Џ missing load voltage	No	No		Yes
Diagnostics indication LED
в—Џ Rated load voltage PWR (green)	No	No		Yes
в—Џ Fuse OK FSG (green)	No	No		Yes
в—Џ Group error SF (red)	Yes		Yes	Yes
в—Џ Status indicator digital output (green)	Yes	Yes	Yes	Yes
Potential separation
Potential separation digital outputs
в—Џ between the channels	Yes	Yes	Yes	Yes
в—Џ between the channels, in groups of	4	1	1	4
в—Џ between the channels and backplane bus	Yes; Optocoupler	Yes; Optocoupler	Yes; Optocoupler	Yes; Optocoupler
Permissible potential difference
between different circuits	146 V DC/132 V AC
Isolation
Isolation tested with	1500 V AC	2000 V AC	1500 V AC	1500 V AC
Standards, approvals, certificates
CE mark	Yes	Yes	Yes	Yes
UL approval	Yes; File E239877	Yes; File E239877	Yes; File E239877	Yes; File E239877
FM approval	Yes; CofC 3028431	Yes; CofC 3028431	Yes; CofC 3028431	Yes; CofC 3028431
RCM (formerly C-TICK)	Yes	Yes	Yes	Yes
KC approval	Yes	Yes	Yes	Yes
EAC (formerly Gost-R)	Yes	Yes	Yes	Yes
Railway application
в—Џ EN 50155	Yes; T1 Category 1 Class A/B horizontal mounting position	Yes; Sections 4, 5 and 12; no further agreements apply; T1, Category 1, Class A/B		Yes; T1 Category 1 Class A/B horizontal mounting position
Ambient conditions
Ambient temperature during operation
в—Џ min.	-25 °C	-25 °C	0 °C; = Tmin	-40 °C
в—Џ max.	70 °C; = Tmax; for use on railway vehicles according to EN50155, the rated temperature range -25 ... +55 °C (T1) or 60 °C @ UL/ULhaz/ATEX/FM use applies	60 °C	60 °C; = Tmax	70 °C; = Tmax; for use on railway vehicles according to EN 50155, the rated temperature range -25 ... +55 °C (T1) or 60 °C @ UL/UL hazardous use applies
Ambient temperature during storage/transportation
в—Џ min.	-40 °C	-40 °C	-40 °C	-40 °C
в—Џ max.	70 °C	70 °C	70 °C	70 °C
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Connection method
required front connector	20-pin	40-pin	40-pin	20-pin
Dimensions
Width	40 mm	40 mm	40 mm	40 mm
Height	125 mm	125 mm	125 mm	125 mm
Depth	120 mm	120 mm	120 mm	120 mm
Weights
Weight, approx.	250 g	320 g	320 g	275 g

Article number	6AG1322-5FF00-4AB0	6AG1322-1FH00-7AA0	6AG1322-1HH01-2AA0
	SIPLUS S7-300 SM322 8DO	SIPLUS S7-300 SM322 16DO	SIPLUS SM322
Supply voltage
Load voltage L+
в—Џ Rated value (DC)			120 V
Load voltage L1
в—Џ Rated value (AC)	230 V; 120/230 V AC	230 V; 120/230 V AC	230 V
в—Џ permissible range, lower limit (AC)	79 V	79 V
в—Џ permissible range, upper limit (AC)	264 V	264 V
Input current
from supply voltage L+, max.			250 mA
from load voltage L1 (without load), max.	2 mA	2 mA
from backplane bus 5 V DC, max.	100 mA	200 mA	100 mA
Power loss
Power loss, typ.	8.6 W	8.6 W	4.5 W
Digital outputs
Number of digital outputs	8	16	16; Relays
Switching capacity of the outputs
в—Џ on lamp load, max.	50 W	50 W	50 W; 230 V AC
Output voltage
в—Џ for signal "1", min.	L1 (-8.5 V)
Output current
в—Џ for signal "1" rated value	2 A	1 A	2 A
в—Џ for signal "1" minimum load current	10 mA	10 mA	10 mA
в—Џ for signal "1" permissible surge current, max.	20 A; with 2 half waves	20 A; with 2 half waves
в—Џ for signal "0" residual current, max.	2 mA	2 mA
Switching frequency
в—Џ with resistive load, max.	10 Hz	10 Hz	1 Hz
в—Џ with inductive load, max.	0.5 Hz	0.5 Hz	0.5 Hz
в—Џ on lamp load, max.	1 Hz	1 Hz	1 Hz
в—Џ mechanical, max.			10 Hz
Total current of the outputs (per group)
horizontal installation
вЂ” up to 40 °C, max.	8 A	4 A
вЂ” up to 60 °C, max.	4 A	2 A	8 A
вЂ” up to 70 °C, max.		1 A
vertical installation
вЂ” up to 40 °C, max.	4 A	2 A	8 A
Relay outputs
в—Џ Rated supply voltage of relay coil L+ (DC)			24 V
в—Џ Number of operating cycles, max.			100 000; 50000 (24 V DC, at 2 A); 700000 (120 V AC, at 2 A); 100000 (230 V AC, at 2 A)
Switching capacity of contacts
вЂ” with inductive load, max.			2 A; 2 A (230 V AC), 2 A (24 V DC)
вЂ” with resistive load, max.			2 A; 2 A (230 V AC), 2 A (24 V DC)
Cable length
в—Џ shielded, max.	1 000 m	1 000 m	1 000 m
в—Џ unshielded, max.	600 m	600 m	600 m
Interrupts/diagnostics/status information
Diagnostic functions	Yes; Parameterizable	Yes; Fuse blown or load voltage missing	No
Alarms
в—Џ Diagnostic alarm	Yes; Parameterizable	No	No
Diagnostic messages
в—Џ Wire-break		No	No
в—Џ Short-circuit		No	No
в—Џ Fuse blown		Yes	No
в—Џ missing load voltage		No	No
Diagnostics indication LED
в—Џ Rated load voltage PWR (green)		No	No
в—Џ Fuse OK FSG (green)		Yes; Red LED for fuse	No
в—Џ Group error SF (red)	Yes	Yes
в—Џ Status indicator digital output (green)	Yes	Yes	Yes
Potential separation
Potential separation digital outputs
в—Џ between the channels	Yes		Yes
в—Џ between the channels, in groups of	1	8	8
в—Џ between the channels and backplane bus	Yes; Optocoupler	Yes; Optocoupler	Yes; Optocoupler
Isolation
Isolation tested with	1500 V AC	4 000 V DC	1500 V AC
Standards, approvals, certificates
CE mark	Yes	Yes	Yes
UL approval	Yes; File E239877	Yes; File E239877	Yes; File E239877
FM approval	Yes; CofC 3028431	Yes; CofC 3028431	Yes; CofC 3028431
RCM (formerly C-TICK)	Yes	Yes	Yes
KC approval	Yes	Yes	Yes
EAC (formerly Gost-R)	Yes	Yes	Yes
Railway application
в—Џ EN 50121-4		No
в—Џ EN 50155	No	No	Yes; Sections 4, 5 and 12; no further agreements apply; T1, Category 1, Class A/B
Ambient conditions
Ambient temperature during operation
в—Џ min.	0 °C; = Tmin	-40 °C; = Tmin	-40 °C
в—Џ max.	60 °C; = Tmax	70 °C; = Tmax; 60 °C @ UL/cUL, ATEX and FM use	70 °C; = Tmax; 60 °C @ UL/cUL, ATEX and FM use
Ambient temperature during storage/transportation
в—Џ min.	-40 °C	-40 °C	-40 °C
в—Џ max.	70 °C	70 °C	70 °C
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)		100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Connection method
required front connector	40-pin	20-pin	20-pin
Dimensions
Width	40 mm	40 mm	40 mm
Height	125 mm	125 mm	125 mm
Depth	120 mm	120 mm	120 mm
Weights
Weight, approx.	275 g	275 g	250 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания