SIPLUS LOGO! modular expansion modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS LOGO! modular expansion modules

| | | | |

Article number	6AG1055-1CB00-7BA2	6AG1055-1HB00-7BA2	6AG1055-1MB00-7BA2
	SIPLUS LOGO! DM8 24 V8	SIPLUS LOGO! DM8 24R V8	SIPLUS LOGO! DM8 12/24R V8
Installation type/mounting
Mounting	on 35 mm DIN rail, 2 spacing units wide	on 35 mm DIN rail, 2 spacing units wide	on 35 mm DIN rail, 2 spacing units wide
Supply voltage
Rated value (DC)
в—Џ 12 V DC			Yes
в—Џ 24 V DC	Yes	Yes	Yes
permissible range, lower limit (DC)	20.4 V	20.4 V	10.8 V
permissible range, upper limit (DC)	28.8 V	28.8 V	28.8 V
Rated value (AC)
в—Џ 24 V AC		Yes
Line frequency
в—Џ permissible range, lower limit		47 Hz
в—Џ permissible range, upper limit		63 Hz
Digital inputs
Number of digital inputs	4	4	4
Input voltage
в—Џ Type of input voltage	DC	AC/DC	DC
в—Џ for signal "0"	< 5 V DC	< 5 V AC/DC	< 5 V DC
в—Џ for signal "1"	> 12 V DC	> 12 V AC/DC	> 8.5 V
Input current
в—Џ for signal "0", max. (permissible quiescent current)	0.88 mA	1.1 mA	0.88 mA
в—Џ for signal "1", typ.	4 mA	5.5 mA	4.2 mA
Input delay (for rated value of input voltage)
for standard inputs
вЂ” at "0" to "1", max.	1.5 ms	1.5 ms	1.5 ms
вЂ” at "1" to "0", max.	1.5 ms	15 ms	1.5 ms
Digital outputs
Number of digital outputs	4	4; Relays	4; Relays
Short-circuit protection	Yes	No	No
Controlling a digital input		Yes	Yes
Switching capacity of the outputs
в—Џ on lamp load, max.		1 000 W	1 000 W
Output current
в—Џ for signal "1" rated value	0.3 A	5 A	5 A
в—Џ for signal "1" minimum load current		100 mA	100 mA
Parallel switching of two outputs
в—Џ for uprating	No	No	No
Switching frequency
в—Џ with resistive load, max.	10 Hz	2 Hz	2 Hz
в—Џ with inductive load, max.	0.5 Hz	0.5 Hz	0.5 Hz
в—Џ mechanical, max.		10 Hz	10 Hz
Relay outputs
Switching capacity of contacts
вЂ” with inductive load, max.		3 A	3 A
вЂ” with resistive load, max.		5 A	5 A
вЂ” Thermal continuous current, max.	0.3 A
EMC
Emission of radio interference acc. to EN 55 011
в—Џ Limit class B, for use in residential areas	Yes	Yes	Yes
Degree and class of protection
Degree of protection acc. to EN 60529
в—Џ IP20	Yes	Yes	Yes
Standards, approvals, certificates
CE mark	Yes	Yes	Yes
CSA approval		No
UL approval		No
FM approval	Yes	No
developed in accordance with IEC 61131	Yes	Yes	Yes
according to VDE 0631	Yes	Yes
Marine approval	Yes	No	Yes
Ambient conditions
Ambient temperature during operation
в—Џ min.	-40 °C; = Tmin; Startup @ -25 °C	-40 °C; = Tmin; Startup @ -25 °C	-40 °C; = Tmin; Startup @ -25 °C
в—Џ max.	70 °C; Tmax; Tmax > +55 °C max. load 0.2 A per output	70 °C; = Tmax; Tmax > +55 °C max. load 3 A per relay or max. total current 10 A	70 °C; = Tmax; Tmax > +55 °C max. load 3 A per relay or max. total current 10 A
в—Џ At cold restart, min.	-25 °C	-25 °C	-25 °C
Ambient temperature during storage/transportation
в—Џ min.	-40 °C	-40 °C	-40 °C
в—Џ max.	70 °C	70 °C	70 °C
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation	100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation	100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width	35.5 mm	35.5 mm	35.5 mm
Height	90 mm	90 mm	90 mm
Depth	58 mm	58 mm	58 mm

Article number	6AG1055-1FB00-7BA2	6AG1055-1NB10-7BA2
	SIPLUS LOGO! DM8 230R V8	SIPLUS LOGO! DM16 24R V8
Installation type/mounting
Mounting	on 35 mm DIN rail, 2 spacing units wide	on 35 mm DIN rail, 4 spacing units wide
Supply voltage
Rated value (DC)
в—Џ 24 V DC		Yes
в—Џ 115 V DC	Yes
в—Џ 230 V DC	Yes
permissible range, lower limit (DC)	100 V	20.4 V
permissible range, upper limit (DC)	253 V	28.8 V
Rated value (AC)
в—Џ 24 V AC		No
в—Џ 115 V AC	Yes
в—Џ 230 V AC	Yes
Line frequency
в—Џ permissible range, lower limit	47 Hz
в—Џ permissible range, upper limit	63 Hz
Digital inputs
Number of digital inputs	4	8
Input voltage
в—Џ Type of input voltage	AC/DC	DC
в—Џ for signal "0"	< 40 V AC, < 30 V DC	< 5 V DC
в—Џ for signal "1"	> 79 V AC, > 79 V DC	> 12 V DC
Input current
в—Џ for signal "0", max. (permissible quiescent current)	0.06 mA; 0.05 mA with AC, 0.06 mA with DC	0.85 mA
в—Џ for signal "1", typ.	0.37 mA	3.5 mA
Input delay (for rated value of input voltage)
for standard inputs
вЂ” at "0" to "1", max.	40 ms	1.5 ms
вЂ” at "1" to "0", max.	75 ms	1.5 ms
Digital outputs
Number of digital outputs	4; Relays	8; Relays
Short-circuit protection	No	No
Controlling a digital input	Yes	Yes
Switching capacity of the outputs
в—Џ on lamp load, max.	1 000 W; 500 W at 115V AC	1 000 W
Output current
в—Џ for signal "1" rated value	5 A	5 A
в—Џ for signal "1" minimum load current	100 mA	100 mA
Parallel switching of two outputs
в—Џ for uprating	No	No
Switching frequency
в—Џ with resistive load, max.	2 Hz	2 Hz
в—Џ with inductive load, max.	0.5 Hz	0.5 Hz
в—Џ mechanical, max.	10 Hz	10 Hz
Relay outputs
Switching capacity of contacts
вЂ” with inductive load, max.	3 A	3 A
вЂ” with resistive load, max.	5 A	5 A
EMC
Emission of radio interference acc. to EN 55 011
в—Џ Limit class B, for use in residential areas	Yes	Yes
Degree and class of protection
Degree of protection acc. to EN 60529
в—Џ IP20	Yes	Yes
Standards, approvals, certificates
CE mark	Yes	Yes
CSA approval	No
UL approval	No
FM approval	No
developed in accordance with IEC 61131	Yes	Yes
according to VDE 0631	Yes	Yes
Marine approval	No	Yes
Ambient conditions
Ambient temperature during operation
в—Џ min.	-40 °C; = Tmin; Startup @ -25 °C	-40 °C; = Tmin; Startup @ -25 °C
в—Џ max.	70 °C; = Tmax; Tmax > +55 °C max. load 3 A per relay or max. total current 10 A	70 °C; = Tmax; Tmax > +55 °C max. load 3 A per relay
в—Џ At cold restart, min.	-25 °C	-25 °C
Ambient temperature during storage/transportation
в—Џ min.	-40 °C	-40 °C
в—Џ max.	70 °C	70 °C
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation	100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width	35.5 mm	71.5 mm
Height	90 mm	90 mm
Depth	58 mm	58 mm

Article number		6AG1055-1MA00-7BA2
		SIPLUS LOGO! AM2 V8
Installation type/mounting
Mounting		on 35 mm DIN rail, 2 spacing units wide
Supply voltage
Rated value (DC)
в—Џ 12 V DC		Yes; 10.8 V DC to 28.8 V DC
в—Џ 24 V DC		Yes; 10.8 V DC to 28.8 V DC
Analog inputs
Number of analog inputs		2
Input ranges
в—Џ Voltage		Yes
в—Џ Current		Yes
в—Џ Resistance thermometer		No
Input ranges (rated values), voltages
в—Џ 0 to +10 V		Yes
Input ranges (rated values), currents
в—Џ 0 to 20 mA		Yes; 0 mA or 4 mA to 20 mA
Input ranges (rated values), resistance thermometer
в—Џ Pt 100		No
EMC
Emission of radio interference acc. to EN 55 011
в—Џ Limit class B, for use in residential areas		Yes
Degree and class of protection
Degree of protection acc. to EN 60529
в—Џ IP20		Yes
Standards, approvals, certificates
CE mark		Yes
CSA approval		No
UL approval		No
FM approval		No
developed in accordance with IEC 61131		Yes
according to VDE 0631		Yes
Marine approval		Yes
Ambient conditions
Ambient temperature during operation
в—Џ min.		-40 °C; = Tmin; Startup @ -25 °C
в—Џ max.		70 °C; = Tmax
в—Џ At cold restart, min.		-25 °C
Ambient temperature during storage/transportation
в—Џ min.		-40 °C
в—Џ max.		70 °C
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3		Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width		35.5 mm
Height		90 mm
Depth		58 mm

Article number		6AG1055-1MM00-7BA2
		SIPLUS LOGO! AM2 AQ V8
Installation type/mounting
Mounting		on 35 mm DIN rail, 2 spacing units wide
Supply voltage
Rated value (DC)
в—Џ 12 V DC		No
в—Џ 24 V DC		Yes
Analog outputs
Number of analog outputs		2
Output ranges, voltage
в—Џ 0 to 10 V		Yes
Output ranges, current
в—Џ 0 to 20 mA		Yes
в—Џ 4 mA to 20 mA		Yes
EMC
Emission of radio interference acc. to EN 55 011
в—Џ Limit class B, for use in residential areas		Yes
Degree and class of protection
Degree of protection acc. to EN 60529
в—Џ IP20		Yes
Standards, approvals, certificates
CE mark		Yes
developed in accordance with IEC 61131		Yes
according to VDE 0631		Yes
Marine approval		Yes
Ambient conditions
Ambient temperature during operation
в—Џ min.		-40 °C; = Tmin; Startup @ -25 °C
в—Џ max.		70 °C; = Tmax
в—Џ At cold restart, min.		-25 °C
Ambient temperature during storage/transportation
в—Џ min.		-40 °C
в—Џ max.		70 °C
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3		Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width		35.5 mm
Height		90 mm
Depth		58 mm

Article number	6AG1055-1CB00-2BY0	6AG1055-1PB00-2BY0	6AG1055-1HB00-2BY0	6AG1055-1MB00-2BY1
	SIPLUS LOGO! DM8 24	SIPLUS LOGO! DM8 12/24	SIPLUS LOGO! DM8 24R	SIPLUS LOGO! DM8 12/24R
Installation type/mounting
Mounting	on 35 mm DIN rail, 2 spacing units wide	on 35 mm DIN rail, 2 spacing units wide	on 35 mm DIN rail, 2 spacing units wide	on 35 mm DIN rail, 2 spacing units wide
Supply voltage
Rated value (DC)
в—Џ 12 V DC				Yes
в—Џ 24 V DC	Yes	Yes	Yes	Yes
permissible range, lower limit (DC)	20.4 V; 22 V @ >55 °C	10.8 V; 11 V @ >55 °C	20.4 V; 22 V @ >55 °C	10.8 V; 11 V @ >55 °C
permissible range, upper limit (DC)	28.8 V; 27.5 V @ >55 °C	28.8 V; 27.5 V @ >55 °C	28.8 V; 27.5 V @ >55 °C	28.8 V; 27.5 V @ >55 °C
Rated value (AC)
в—Џ 24 V AC			Yes
Digital inputs
Number of digital inputs	4	4	4	4
Input voltage
в—Џ Type of input voltage	DC	DC	AC/DC	DC
Digital outputs
Number of digital outputs	4; Transistor	4; Transistor	4; Relays	4; Relays
Short-circuit protection	Yes	Yes	No	No
Output current
в—Џ for signal "1" rated value	0.3 A; 0.2 A @ > 55 °C; 0.3 A @ > 55 °C & < 15 s	0.3 A; 0.2 A @ > 55 °C; 0.3 A @ > 55 °C & < 15 s	5 A	5 A
Relay outputs
Switching capacity of contacts
вЂ” with inductive load, max.			3 A; 1 A per relay @ > 55 °C; 3 A per relay @ > 55 °C & < 15 s	3 A; 1 A per relay @ > 55 °C; 3 A per relay @ > 55 °C & < 15 s
вЂ” with resistive load, max.			5 A; 3 A per relay @ > 55 °C; 5 A < 15 s; 10 A all 4 relays in total	5 A; 3 A per relay @ > 55 °C; 5 A < 15 s; 10 A all 4 relays in total
EMC
Emission of radio interference acc. to EN 55 011
в—Џ Limit class B, for use in residential areas	Yes	Yes	Yes	Yes
Degree and class of protection
Degree of protection acc. to EN 60529
в—Џ IP20	Yes	Yes	Yes	Yes
Standards, approvals, certificates
CSA approval	No	No	No	No
UL approval	Yes; File: E120869 // Tmax = 55 °C	Yes; File: E120869 // Tmax = 55 °C	Yes; File: E120869 // Tmax = 55 °C	Yes; File: E120869 // Tmax = 55 °C
FM approval	No	No	No	No
developed in accordance with IEC 61131	Yes	Yes	Yes	Yes
according to VDE 0631	Yes	Yes	Yes	Yes
Marine approval	No	No	No	No
Ambient conditions
Ambient temperature during operation
в—Џ min.	-40 °C; = Tmin	-40 °C; = Tmin	-40 °C; = Tmin	-40 °C; = Tmin
в—Џ max.	70 °C; = Tmax; 55 °C @ UL/cUL use	70 °C; = Tmax; 55 °C @ UL/cUL use	70 °C; = Tmax; 55 °C @ UL/cUL use	70 °C; = Tmax; 55 °C @ UL/cUL use
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost permitted (no commissioning in bedewed state)	100 %; RH incl. condensation/frost permitted (no commissioning in bedewed state)	100 %; RH incl. condensation/frost permitted (no commissioning in bedewed state)	100 %; RH incl. condensation/frost permitted (no commissioning in bedewed state)
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3	Yes; Class 3C4 incl. salt spray. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 incl. salt spray. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 incl. salt spray. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 incl. salt spray. The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width	36 mm; 2 DU	36 mm; 2 DU	36 mm; 2 DU	36 mm; 2 DU
Height	90 mm	90 mm	90 mm	90 mm
Depth	55 mm	55 mm	55 mm	55 mm

Article number	6AG1055-1FB00-2BY1	6AG1055-1NB10-2BA0
	SIPLUS LOGO! DM8 230R	SIPLUS LOGO! DM16 24R ERW.-MODUL
Installation type/mounting
Mounting	on 35 mm DIN rail, 2 spacing units wide	on 35 mm DIN rail, 4 spacing units wide
Supply voltage
Rated value (DC)
в—Џ 24 V DC		Yes
в—Џ 115 V DC	Yes
в—Џ 230 V DC	Yes
permissible range, lower limit (DC)	100 V	20.4 V; 22 V @ >55 °C
permissible range, upper limit (DC)	253 V	28.8 V; 27.5 V @ >55 °C
Rated value (AC)
в—Џ 115 V AC	Yes
в—Џ 230 V AC	Yes
Digital inputs
Number of digital inputs	4	8
Input voltage
в—Џ Type of input voltage	AC/DC	DC
в—Џ for signal "0"		< 5 V DC
в—Џ for signal "1"		> 12 V DC
Input current
в—Џ for signal "0", max. (permissible quiescent current)		1 mA
в—Џ for signal "1", typ.		2 mA
Input delay (for rated value of input voltage)
for standard inputs
вЂ” at "0" to "1", max.		1.5 ms
вЂ” at "1" to "0", max.		1.5 ms
Digital outputs
Number of digital outputs	4; Relays	8; Relays
Short-circuit protection	No	No
Controlling a digital input		Yes
Switching capacity of the outputs
в—Џ on lamp load, max.		1 000 W; 500 W at 115V AC
Output current
в—Џ for signal "1" rated value	5 A	5 A
Parallel switching of two outputs
в—Џ for uprating		No
Switching frequency
в—Џ with resistive load, max.		2 Hz
в—Џ with inductive load, max.		0.5 Hz
в—Џ mechanical, max.		10 Hz
Relay outputs
Switching capacity of contacts
вЂ” with inductive load, max.	3 A; 1 A per relay @ > 55 °C; 3 A per relay @ > 55 °C & < 15 s	3 A; 1 A per relay @ > 55 °C; 3 A per relay @ > 55 °C & < 15 s
вЂ” with resistive load, max.	5 A; 3 A per relay @ > 55 °C; 5 A < 15 s; 10 A all 4 relays in total	5 A; 3 A per relay @ > 55 °C; 10 A per relay @ > 55 °C & < 15 s
EMC
Emission of radio interference acc. to EN 55 011
в—Џ Limit class B, for use in residential areas	Yes	Yes
Degree and class of protection
Degree of protection acc. to EN 60529
в—Џ IP20	Yes	Yes
Standards, approvals, certificates
CSA approval	No	No
UL approval	Yes; File: E120869 // Tmax = 55 °C	In application process
FM approval	No	No
developed in accordance with IEC 61131	Yes	Yes
according to VDE 0631	Yes	Yes
Marine approval	No	No
Ambient conditions
Ambient temperature during operation
в—Џ min.	-40 °C; = Tmin	-25 °C; = Tmin
в—Џ max.	70 °C; = Tmax; 55 °C @ UL/cUL use	70 °C; = Tmax; 55 °C @ UL/cUL use
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost permitted (no commissioning in bedewed state)	100 %; RH incl. condensation/frost permitted (no commissioning in bedewed state)
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3	Yes; Class 3C4 incl. salt spray. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 incl. salt spray. The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width	36 mm; 2 DU	72 mm; 4 WU
Height	90 mm	90 mm
Depth	55 mm	53 mm

Article number		6AG1055-1MA00-2BY0
		SIPLUS LOGO! AM2
Installation type/mounting
Mounting		on 35 mm DIN rail, 2 spacing units wide
Supply voltage
Rated value (DC)
в—Џ 12 V DC		Yes
в—Џ 24 V DC		Yes
Analog inputs
Number of analog inputs		2
Input ranges
в—Џ Voltage		Yes
в—Џ Current		Yes
в—Џ Resistance thermometer		No
Input ranges (rated values), voltages
в—Џ 0 to +10 V		Yes
Input ranges (rated values), currents
в—Џ 0 to 20 mA		Yes
EMC
Emission of radio interference acc. to EN 55 011
в—Џ Limit class B, for use in residential areas		Yes
Degree and class of protection
Degree of protection acc. to EN 60529
в—Џ IP20		Yes
Standards, approvals, certificates
CSA approval		No
UL approval		Yes; File: E120869 // Tmax = 55 °C
FM approval		No
developed in accordance with IEC 61131		Yes
according to VDE 0631		Yes
Marine approval		No
Ambient conditions
Ambient temperature during operation
в—Џ min.		-40 °C; = Tmin
в—Џ max.		70 °C; = Tmax; 55 °C @ UL/cUL use
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation/frost permitted (no commissioning in bedewed state)
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3		Yes; Class 3C4 incl. salt spray. The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width		36 mm
Height		90 mm
Depth		55 mm

Article number		6AG1055-1MM00-2BY1
		SIPLUS_LOGO!_AM2_AQ
Installation type/mounting
Mounting		on 35 mm DIN rail, 2 spacing units wide
Supply voltage
Rated value (DC)
в—Џ 24 V DC		Yes
Analog outputs
Number of analog outputs		2
Output ranges, voltage
в—Џ 0 to 10 V		Yes
Output ranges, current
в—Џ 0 to 20 mA		Yes
в—Џ 4 mA to 20 mA		Yes
EMC
Emission of radio interference acc. to EN 55 011
в—Џ Limit class B, for use in residential areas		Yes; Radio interference suppression according to EN55011, Limit Value Class B
Degree and class of protection
Degree of protection acc. to EN 60529
в—Џ IP20		Yes
Standards, approvals, certificates
CSA approval		No
UL approval		No
FM approval		No
developed in accordance with IEC 61131		Yes
according to VDE 0631		Yes
Marine approval		No
Ambient conditions
Ambient temperature during operation
в—Џ min.		-40 °C; = Tmin
в—Џ max.		70 °C; = Tmax; 55 °C @ UL/cUL use
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation/frost permitted (no commissioning in bedewed state)
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3		Yes; Class 3C4 incl. salt spray. The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width		36 mm
Height		90 mm
Depth		55 mm

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания