SIPLUS S7-300 CPU 315F-2 DP . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS S7-300 CPU 315F-2 DP

| | | | | | |

Article number	6AG1315-6FF04-2AB0	6AG1315-6FF04-2AY0
	SIPLUS S7-300 CPU 315F-2DP	SIPLUS S7-300 CPU 315F-2DP EN50155
General information
HW functional status	01	01
Firmware version	V3.3	V3.3
Engineering with
в—Џ Programming package	STEP 7 V5.5 + SP1 or higher or STEP 7 V5.2 + SP1 or higher with HSP 218 + Distributed Safety	STEP 7 V5.5 + SP1 or higher or STEP 7 V5.2 + SP1 or higher with HSP 218 + Distributed Safety
Supply voltage
Rated value (DC)
в—Џ 24 V DC	Yes	Yes; A power supply according to EN 50155 shall be used
permissible range, lower limit (DC)	19.2 V	19.2 V
permissible range, upper limit (DC)	28.8 V	28.8 V
external protection for power supply lines (recommendation)	2 A min.	2 A min.
Mains buffering
в—Џ Mains/voltage failure stored energy time	5 ms	5 ms
в—Џ Repeat rate, min.	1 s	1 s
Input current
Current consumption (rated value)	850 mA	850 mA
Current consumption (in no-load operation), typ.	150 mA	150 mA
Inrush current, typ.	3.5 A	3.5 A
IІt	1 AІ·s	1 AІ·s
Power loss
Power loss, typ.	4.5 W	4.5 W
Memory
Work memory
в—Џ integrated	384 kbyte	384 kbyte
в—Џ expandable	No	No
в—Џ Size of retentive memory for retentive data blocks	128 kbyte	128 kbyte
Load memory
в—Џ Plug-in (MMC)	Yes	Yes
в—Џ Plug-in (MMC), max.	8 Mbyte	8 Mbyte
в—Џ Data management on MMC (after last programming), min.	10 y	10 y
Backup
в—Џ present	Yes; Guaranteed by MMC (maintenance-free)	Yes; Guaranteed by MMC (maintenance-free)
в—Џ without battery	Yes; Program and data	Yes; Program and data
CPU processing times
for bit operations, typ.	0.05 µs	0.05 µs
for word operations, typ.	0.09 µs	0.09 µs
for fixed point arithmetic, typ.	0.12 µs	0.12 µs
for floating point arithmetic, typ.	0.45 µs	0.45 µs
CPU-blocks
Number of blocks (total)	1 024; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used.	1 024; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used.
DB
в—Џ Number, max.	1 024; Number range: 1 to 16000	1 024; Number range: 1 to 16000
в—Џ Size, max.	64 kbyte	64 kbyte
FB
в—Џ Number, max.	1 024; Number range: 0 to 7999	1 024; Number range: 0 to 7999
в—Џ Size, max.	64 kbyte	64 kbyte
FC
в—Џ Number, max.	1 024; Number range: 0 to 7999	1 024; Number range: 0 to 7999
в—Џ Size, max.	64 kbyte	64 kbyte
OB
в—Џ Description	see instruction list	see instruction list
в—Џ Size, max.	64 kbyte	64 kbyte
в—Џ Number of free cycle OBs	1; OB 1	1; OB 1
в—Џ Number of time alarm OBs	1; OB 10	1; OB 10
в—Џ Number of delay alarm OBs	2; OB 20, 21	2; OB 20, 21
в—Џ Number of cyclic interrupt OBs	4; OB 32, 33, 34, 35	4; OB 32, 33, 34, 35
в—Џ Number of process alarm OBs	1; OB 40	1; OB 40
в—Џ Number of DPV1 alarm OBs	3; OB 55, 56, 57	3; OB 55, 56, 57
в—Џ Number of isochronous mode OBs	1; OB 61	1; OB 61
в—Џ Number of startup OBs	1; OB 100	1; OB 100
в—Џ Number of asynchronous error OBs	5; OB 80, 82, 85, 86, 87	5; OB 80, 82, 85, 86, 87
в—Џ Number of synchronous error OBs	2; OB 121, 122	2; OB 121, 122
Nesting depth
в—Џ per priority class	16	16
в—Џ additional within an error OB	4	4
Counters, timers and their retentivity
S7 counter
в—Џ Number	256	256
Retentivity
вЂ” adjustable	Yes	Yes
вЂ” lower limit	0	0
вЂ” upper limit	255	255
вЂ” preset	Z 0 to Z 7	Z 0 to Z 7
Counting range
вЂ” can be set		Yes
вЂ” lower limit	0	0
вЂ” upper limit	999	999
IEC counter
в—Џ Number	Unlimited (limited only by RAM capacity)	Unlimited (limited only by RAM capacity)
S7 times
в—Џ Number	256	256
Retentivity
вЂ” adjustable	Yes	Yes
вЂ” lower limit	0	0
вЂ” upper limit	255	255
вЂ” preset	No retentivity	No retentivity
Time range
вЂ” lower limit	10 ms	10 ms
вЂ” upper limit	9 990 s	9 990 s
IEC timer
в—Џ present	Yes	Yes
в—Џ Type	SFB	SFB
в—Џ Number	Unlimited (limited only by RAM capacity)	Unlimited (limited only by RAM capacity)
Data areas and their retentivity
retentive data area in total	All, 128 KB max.	All, 128 KB max.
Flag
в—Џ Number, max.	2 048 byte	2 048 byte
в—Џ Retentivity available	Yes; MB 0 to MB 2047	Yes; MB 0 to MB 2047
в—Џ Retentivity preset	MB 0 to MB 15	MB 0 to MB 15
в—Џ Number of clock memories	8; 1 memory byte	8; 1 memory byte
Data blocks
в—Џ Retentivity adjustable	Yes; via non-retain property on DB	Yes; via non-retain property on DB
в—Џ Retentivity preset	Yes	Yes
Local data
в—Џ per priority class, max.	32 kbyte; Max. 2 KB per block	32 kbyte; Max. 2 KB per block
Address area
I/O address area
в—Џ Inputs	2 048 byte	2 048 byte
в—Џ Outputs	2 048 byte	2 048 byte
of which distributed
вЂ” Inputs	2 048 byte	2 048 byte
вЂ” Outputs	2 048 byte	2 048 byte
Process image
в—Џ Inputs	2 048 byte	2 048 byte
в—Џ Outputs	2 048 byte	2 048 byte
в—Џ Inputs, adjustable	2 048 byte	2 048 byte
в—Џ Outputs, adjustable	2 048 byte	2 048 byte
в—Џ Inputs, default	384 byte	384 byte
в—Џ Outputs, default	384 byte	384 byte
Subprocess images
в—Џ Number of subprocess images, max.	1	1
Digital channels
в—Џ Inputs	16 384	16 384
вЂ” of which central	1 024	1 024
в—Џ Outputs	16 384	16 384
вЂ” of which central	1 024	1 024
Analog channels
в—Џ Inputs	1 024	1 024
вЂ” of which central	256	256
в—Џ Outputs	1 024	1 024
вЂ” of which central	256	256
Hardware configuration
Number of expansion units, max.	3	3
Number of DP masters
в—Џ integrated	1	1
в—Џ via CP	4	4
Number of operable FMs and CPs (recommended)
в—Џ FM	8	8
в—Џ CP, PtP	8	8
в—Џ CP, LAN	10	10
Rack
в—Џ Racks, max.	4	4
в—Џ Modules per rack, max.	8	8
Time of day
Clock
в—Џ Hardware clock (real-time)	Yes	Yes
в—Џ retentive and synchronizable	Yes	Yes
в—Џ Backup time	6 wk; At 40 °C ambient temperature	6 wk; At 40 °C ambient temperature
в—Џ Deviation per day, max.	10 s; Typ.: 2 s	10 s; Typ.: 2 s
в—Џ Behavior of the clock following POWER-ON	Clock continues running after POWER OFF
в—Џ Behavior of the clock following expiry of backup period	Clock continues to run with the time at which the power failure occurred	Clock continues to run with the time at which the power failure occurred
Operating hours counter
в—Џ Number	1	1
в—Џ Number/Number range	0	0
в—Џ Range of values	0 to 2^31 hours (when using SFC 101)	0 to 2^31 hours (when using SFC 101)
в—Џ Granularity	1 hour	1 hour
в—Џ retentive	Yes; Must be restarted at each restart	Yes; Must be restarted at each restart
Clock synchronization
в—Џ supported	Yes	Yes
в—Џ to MPI, master	Yes	Yes
в—Џ to MPI, slave	Yes	Yes
в—Џ to DP, master	Yes; With DP slave only slave clock	Yes; With DP slave only slave clock
в—Џ to DP, slave	Yes	Yes
в—Џ in AS, master	Yes	Yes
в—Џ in AS, slave	No
Digital inputs
Number of digital inputs	0	0
Digital outputs
Number of digital outputs	0	0
Analog inputs
Number of analog inputs	0	0
Analog outputs
Number of analog outputs	0	0
Interfaces
Number of industrial Ethernet interfaces	0	0
Number of PROFINET interfaces	0	0
Number of RS 485 interfaces	2	2
Number of RS 422 interfaces	0	0
1. Interface
Interface type	Integrated RS 485 interface	Integrated RS 485 interface
Physics	RS 485	RS 485
Isolated	No	No
Power supply to interface (15 to 30 V DC), max.	200 mA	200 mA
Functionality
в—Џ MPI	Yes	Yes
в—Џ PROFIBUS DP master	No	No
в—Џ PROFIBUS DP slave	No	No
в—Џ Point-to-point connection	No	No
MPI
в—Џ Transmission rate, max.	187.5 kbit/s	187.5 kbit/s
Services
вЂ” PG/OP communication	Yes	Yes
вЂ” Routing	Yes	Yes
вЂ” Global data communication	Yes	Yes
вЂ” S7 basic communication	Yes	Yes
вЂ” S7 communication	Yes; Only server, configured on one side	Yes
вЂ” S7 communication, as client	No	No
вЂ” S7 communication, as server	Yes	Yes
2. Interface
Interface type	Integrated RS 485 interface	Integrated RS 485 interface
Physics	RS 485	RS 485
Isolated	Yes	Yes
Power supply to interface (15 to 30 V DC), max.	200 mA	200 mA
Functionality
в—Џ MPI	No	No
в—Џ PROFIBUS DP master	Yes	Yes
в—Џ PROFIBUS DP slave	Yes	Yes
в—Џ Point-to-point connection	No	No
DP master
в—Џ Transmission rate, max.	12 Mbit/s	12 Mbit/s
в—Џ Number of DP slaves, max.	124; Per station	124; Per station
Services
вЂ” PG/OP communication	Yes	Yes
вЂ” Routing	Yes	Yes
вЂ” Global data communication	No	No
вЂ” S7 basic communication	Yes; I blocks only	Yes; I blocks only
вЂ” S7 communication	Yes; Only server, configured on one side	Yes
вЂ” S7 communication, as client	No	No
вЂ” S7 communication, as server	Yes	Yes
вЂ” Equidistance	Yes	Yes
вЂ” Isochronous mode	Yes; OB 61	Yes; OB 61
вЂ” SYNC/FREEZE	Yes	Yes
вЂ” Activation/deactivation of DP slaves	Yes	Yes
вЂ” Number of DP slaves that can be simultaneously activated/deactivated, max.	8	8
вЂ” DPV1	Yes	Yes
Address area
вЂ” Inputs, max.	2 048 byte	2 048 byte
вЂ” Outputs, max.	2 048 byte	2 048 byte
User data per DP slave
вЂ” Inputs, max.	244 byte	244 byte
вЂ” Outputs, max.	244 byte	244 byte
DP slave
в—Џ GSD file	The latest GSD file is available at: http://www.siemens.com/profibus-gsd	The latest GSD file is available at: http://www.siemens.com/profibus-gsd
в—Џ Transmission rate, max.	12 Mbit/s	12 Mbit/s
в—Џ automatic baud rate search	Yes; only with passive interface	Yes; only with passive interface
в—Џ Address area, max.	32	32
в—Џ User data per address area, max.	32 byte	32 byte
Services
вЂ” PG/OP communication	Yes	Yes
вЂ” Routing	Yes; Only with active interface	Yes; Only with active interface
вЂ” Global data communication	No	No
вЂ” S7 basic communication	No	No
вЂ” S7 communication	Yes; Only server, configured on one side	Yes; Only server, configured on one side
вЂ” S7 communication, as client	No	No
вЂ” S7 communication, as server	Yes	Yes
вЂ” Direct data exchange (slave-to-slave communication)	Yes	Yes
вЂ” DPV1	No	No
Transfer memory
вЂ” Inputs	244 byte	244 byte
вЂ” Outputs	244 byte	244 byte
Isochronous mode
Isochronous operation (application synchronized up to terminal)	Yes	Yes
Communication functions
PG/OP communication	Yes	Yes
Data record routing	Yes	Yes
Global data communication
в—Џ supported	Yes	Yes
в—Џ Number of GD loops, max.	8	8
в—Џ Number of GD packets, max.	8	8
в—Џ Number of GD packets, transmitter, max.	8	8
в—Џ Number of GD packets, receiver, max.	8	8
в—Џ Size of GD packets, max.	22 byte	22 byte
в—Џ Size of GD packet (of which consistent), max.	22 byte	22 byte
S7 basic communication
в—Џ supported	Yes	Yes
в—Џ User data per job, max.	76 byte	76 byte
в—Џ User data per job (of which consistent), max.	76 byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server)	76 byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server)
S7 communication
в—Џ supported	Yes	Yes
в—Џ as server	Yes	Yes
в—Џ as client	Yes; Via CP and loadable FB	Yes; Via CP and loadable FB
в—Џ User data per job, max.	180 byte; With PUT/GET	180 byte; With PUT/GET
в—Џ User data per job (of which consistent), max.	240 byte; as server	240 byte; as server
S5 compatible communication
в—Џ supported	Yes; via CP and loadable FC	Yes; via CP and loadable FC
Number of connections
в—Џ overall	16	16
в—Џ usable for PG communication	15	15
вЂ” reserved for PG communication	1	1
вЂ” adjustable for PG communication, min.	1	1
вЂ” adjustable for PG communication, max.	15	15
в—Џ usable for OP communication	15	15
вЂ” reserved for OP communication	1	1
вЂ” adjustable for OP communication, min.	1	1
вЂ” adjustable for OP communication, max.	15	15
в—Џ usable for S7 basic communication	12	12
вЂ” reserved for S7 basic communication	0	0
вЂ” adjustable for S7 basic communication, min.	0	0
вЂ” adjustable for S7 basic communication, max.	12	12
S7 message functions
Number of login stations for message functions, max.	16; Depending on the configured connections for PG/OP and S7 basic communication	16; Depending on the configured connections for PG/OP and S7 basic communication
Process diagnostic messages	Yes	Yes
simultaneously active Alarm-S blocks, max.	300	300
Test commissioning functions
Status block	Yes; Up to 2 simultaneously	Yes; Up to 2 simultaneously
Single step	Yes	Yes
Number of breakpoints	4	4
Status/control
в—Џ Status/control variable	Yes	Yes
в—Џ Variables	Inputs, outputs, memory bits, DB, times, counters	Inputs, outputs, memory bits, DB, times, counters
в—Џ Number of variables, max.	30	30
вЂ” of which status variables, max.	30	30
вЂ” of which control variables, max.	14	14
Forcing
в—Џ Forcing	Yes	Yes
в—Џ Forcing, variables	Inputs, outputs	Inputs, outputs
в—Џ Number of variables, max.	10	10
Diagnostic buffer
в—Џ present	Yes	Yes
в—Џ Number of entries, max.	500	500
вЂ” adjustable	No	No
вЂ” of which powerfail-proof	100; Only the last 100 entries are retained	100; Only the last 100 entries are retained
в—Џ Number of entries readable in RUN, max.
вЂ” can be set	Yes; From 10 to 499	Yes; From 10 to 499
вЂ” preset	10	10
Service data
в—Џ can be read out	Yes
Isolation
Isolation tested with		500V AC for 1 minute
Standards, approvals, certificates
CE mark	Yes	Yes
UL approval	Yes; File E239877	Yes; File E239877
FM approval	Yes; CofC 3028431	Yes; CofC 3028431
RCM (formerly C-TICK)	Yes	Yes
KC approval	Yes	Yes
EAC (formerly Gost-R)	Yes	Yes
Railway application
в—Џ EN 50155	No	Yes; Sections 4, 5 and 12; no further agreements apply; T1, Category 1, Class A/B
Use in hazardous areas
в—Џ ATEX	Yes	Yes
Ambient conditions
Ambient temperature during operation
в—Џ min.	-25 °C	-25 °C; = Tmin
в—Џ max.	60 °C	60 °C; = Tmax; the rated temperature range of -25 ... +55 °C (T1) applies for the use on railway vehicles according to EN50155
Ambient temperature during storage/transportation
в—Џ min.	-40 °C	-40 °C
в—Џ max.	70 °C	70 °C
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation
Resistance
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation in corrosive atmospheres!
вЂ” to chemically active substances according to EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Configuration
Configuration software
в—Џ STEP 7	Yes; V5.2 SP1 or higher with HW update	Yes; V5.2 SP1 or higher with HW update
Programming
в—Џ Command set	see instruction list	see instruction list
в—Џ Nesting levels	8	8
в—Џ System functions (SFC)	see instruction list	see instruction list
в—Џ System function blocks (SFB)	see instruction list	see instruction list
Programming language
вЂ” LAD	Yes	Yes
вЂ” FBD	Yes	Yes
вЂ” STL	Yes	Yes
вЂ” SCL	Yes	Yes
вЂ” CFC	Yes	Yes
вЂ” GRAPH	Yes	Yes
вЂ” HiGraph®	Yes	Yes
Know-how protection
в—Џ User program protection/password protection	Yes	Yes
в—Џ Block encryption	Yes; With S7 block Privacy	Yes; With S7 block Privacy
Dimensions
Width	40 mm	40 mm
Height	125 mm	125 mm
Depth	130 mm	130 mm
Weights
Weight, approx.	290 g	290 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания