The 3SF1 position switches with safety-related communication can be directly connected using the AS-Interface bus system. The safety functions no longer have to be conventionally wired up.

With the 3SF1 position switches the ASIsafe electronics component is integrated in the switch enclosure.

Examples of selection options in the modular system

Modular system

The position switches of the 3SF11.4 and 3SF12.4 series are designed as a modular system comprising different versions of the basic switch and an actuator which must be ordered separately. Thanks to the modular design of the switch the end user can select the right solution for his application from numerous versions and install it himself in a very short time.

Design

The 3SF1 switches are available in various enclosure sizes:

• Plastic and metal enclosures according to EN 50047, 31 mm wide, with M12 plug
• Metal enclosures according to EN 50041, 40 mm wide, with M12 plug
• Plastic enclosures, 50 mm wide, with M12 plug and M12 socket
• Metal enclosures, 56 mm wide, with M12 plug and M12 socket

Display

The switches have a status display with three LEDs:

LED 1 (yellow): F-IN1

LED 2 (yellow): F-IN2

LED 3 (green/red): AS-i/FAULT

Connection

Connection to the AS-Interface is by means of a 4-pole M12 connector socket (plastic version) connected to the yellow AS-Interface bus cable.

The wide enclosures (50 or 56 mm) also have an M12 socket for connecting a second position switch. Category 4 according to EN ISO 13849-1 is thus achieved.