The stainless steel junction box consists of a base section and a cover. The housing is sealed against penetration of dust and splashed water in accordance with IP 66 degree of protection. The cables enter the casing via metric EMC cable glands (brass, nickel-plated). In the housing, there are 18 terminals with spring-mounted contacts. The spring-mounted system results in vibration-resistant, maintenance-free connections.

The internal resistance, characteristic value and nominal load of all load cells connected in parallel must be identical. The values of these variables are not limited by the junction box. Load cells can be connected using a four-wire or six-wire system.

With the four-wire system, two jumpers must be set in addition.

Connection example

LC: load cell JB: stainless steel junction box