The sensor can be connected to FCT010, FCT030 and MASS 6000 (none CE) transmitters for compact and remote installation as well as SIFLOW FC070 standard and Ex type transmitters.

All sensors are delivered with a Sensor Flash or SENSORPROM containing all information about calibration data, identity and factory pre-programming of transmitter settings.

Installation guidelines MASS 2100 DI 3 вЂ¦ DI 15 (1/8” вЂ¦ Ѕ”)

Installation of sensor

In order to perform according to given specifications for flow and density accuracy, the sensor must be installed using rigid mounting brackets as shown in the installation examples.

If the liquid is volatile or contains solid particles, vertical mounting is not recommended.

	Liquid	Gas
Horizontal
Vertical

Vibration

Always locate the flowmeter as far away as possible from components that generate mechanical vibration in the piping.

Cross talk

Cross talk between sensors mounted close to each other may disturb the measurement. To avoid cross talk never mount more than one meter on each frame and mount flexible hose connections between the sensors as shown.

Zero point adjustment

To facilitiate zero point adjustment a shut-off valve should always be mounted in connection with the sensor as a proper zero point setting is essential for a good accuarcy.