Interfaces | |
- Connection for telephone network or dedicated line
| 1 x RJ12 |
- RS232 connection for data terminal equipment
| 1 x 9-pin Sub-D connector |
- RS485 connection for data terminal equipment
| 1 x 9-pin Sub-D socket |
- Connection for supply voltage
| 1 x 4-pin terminal block |
Voltage supply | 24 V DC |
Current consumption | |
| 200 mA |
Power loss | 4.8 W |
Permissible ambient conditions | |
| 0 °C … +60 °C |
- Transport/storage temperature
| -40 °C … +70 °C |
| max. 95 % at +25 °C |
Design | |
| Compact module S7-300, double width |
- Dimensions (W x H x D) in mm
| 80 x 125 x 120 |
| approx. 300 g |
Degree of protection | IP20 |
Transmission path | Analog dial-up telephone network Dedicated line, 2-wire twisted pair cable, non-coil-loaded |
Available ITU transmission standards in analog telephone network | |
| 1200 bit/s, duplex |
| 2400 bit/s, duplex |
| 4800 bit/s, duplex |
| 9600 bit/s, duplex |
| 14400 bit/s, duplex |
| 19200 bit/s, duplex |
| 33600 bit/s, duplex |
Error correction | V.42 and MNP4 |
Data compression | V.42bis and MNP5 |
Modem control | AT commands V.25bis commands |
Telephone charge pulse filter can be set to: | 12 kHz 16 kHz |
Dial-up procedure | Voice frequency dialing Pulse dialing |
Loop current component | Available; can be connected and disconnected |
Loudspeaker | Available; can be connected and disconnected |
Line matching | 600 ohms Zr (frequency-dependent) |
Transmission level can be set to | -10 dB -15 dB |
Asynchronous character format | 10 or 11 bits |
Standard dedicated-line profiles | 300 bit/s (direct) 1200 bit/s (direct) 2400 bit/s (direct) 9600 bit/s (direct) 19200 bit/s (direct) 19200 bit/s (buffered) 33600 bit/s (buffered) |
Compatible with SINAUT modems (as telephone modem) | |
| |
| 1200 bit/s, duplex |
| 2400 bit/s, duplex |
| |
| 2400 bit/s, duplex |
| |
| 1200 bit/s, duplex |
| 2400 bit/s, duplex |
| 4800 bit/s, duplex |
| 9600 bit/s, duplex |
| 14400 bit/s, duplex |
Approvals | Europe U.S.A. Canada |
Recommended line quality on leased telephone lines | M1020 M1025 |